Veeam and Vmware replication

Hi guys

We are a data center that provides services with replication of Veeam, now a customer is thinking to reproduce their site but using Vmware replication...

you see nothing wrong with having two different products, reproducing in our Datacenter or say 1 vCenter?

Important Veeam replicates a group of virtual machines and Vmware replication will replicate another different group of virtual machines

Thank you very much

Hi Escapem2,

Yes, it should be possible. There is not no problem if you use two sellers for a data center or 1 VC from the point of view of replication. You'll have to make sure all the configuration requirements are met.

In the replication of VMware, you will need to install the unit of replication vSphre, Sami is managed based on using the web client. On the other hand, Veem replication has their console where you add your ESXi or VC.

Both these replication technologies are at VM level, there should be no problem until you choose a different set of virtual machines for setting replication job. (There will not be any conflict)

Prospect management VMware replication helps as it is managed by the same web client that manages the entire VMware infrastructure. But there will be a difference from the point of view feature set.

I suggest you first zoom before why customer wishes to go for VMware replication and make the right decision. But you can use the two together.

Please see:

http://www.yellow-bricks.com/2012/09/17/back-to-basics-install-configure-and-use-vSphere-replication/

http://www.vmwarearena.com/2013/07/adding-esxesxi-host-or-vCenter-server.html

KB1522:

P.S.: Award points if it's useful/correct.

Tags: VMware

Similar Questions

  • Violation of VMWare replication RPO

    We deploy VMware replication as part of a disaster recovery plan. Currently we have all ESXi hosts in the same room server, directly connected with each other to solve problems and test the replication before moving the DR ESXi host at the remote site. Over the weekend, there was a violation of RPO in which he took 4 hours to replicate 15 minutes RPO. When you try to recover from this error, the only option was to stop and reconfigure replication that has deleted all the files on the host computer of DR and restarting replication from scratch. It is a server of 3TO, if I take this host to a remote site and that this happen, it could take a week to get out all the data again the WAN link. Is there any other way to retrieve an error of RPO? If this is not the case, this seems to be a severe design flaw. There should be a way to say "ok, ignore replication failed and try again"?

    Using ESXi 5.5 on the guest and VMware 5.5 replication apparatus.

    Thanks in advance for any help or comments.

    Joel

    Hi Joel,

    How it was decided that "the only option was to stop and reconfigure replication?

    You can view the events in vCenter on the VM source? There should be more details on the size of the delta package and at the start of the delta and if he had any questions.

    The violation of the RPO is usually the result of the connectivity issue between source ESXi and server target VR (source ESXi vmkernel.log and events in vCenter will have details) or between server VR target and target data store (/ var/log/vmware/hbsrv * will have details).

    If the connectivity (or the performance of the network) was not a temporary problem, there will be events on the source of the virtual machine with the increase of the current values of RPO violation (in minutes).

    It is perhaps open an SR and download the support beams for the source ESXi, vCenter and target server VR.

    Stop replication automatically deletes all of the drives, which was initially implemented by VR. Only discs that have been used as initial seeds will be left. It is a known (and I agree - should somewhat not) behavior.

    If the issue leading to the violation of the APR was transitory, the source ESXi will automatically plan a new instance of the replica, no need to sync manually, request although it wouldn't hurt.

    Kind regards

    Martin

  • Oracle Streams Advanced Queuing and advanced replication

    Hi experts,

    I don't have much experience in Oracle. Please tell me what is "Oracle Streams" in simple words. What is use of this example.

    difference between "Oracle Streams, advanced and advanced replication queues".

    Reg,

    Hard

    Hi harsh,

    I'll try and simply summarize for you.

    (1) advanced replication - the ancient mode of replication of data between databases - no one really uses this method more (even if it's still there)

    (2) AQ (or now renamed as streams AQ I think) is a technology of queues for the publication and subscription to messages - it is not a replication method on its own, but is a key technology for manufacturing workflow

    (3) water - a replication technology course complete with a huge amount of flexibility (and complexity) - one of the best tools of the oracle set product - but it is now be depracated in favor of goldengate (in large part because GG is a costly option, personally, I think)

    (4) goldengate - just like rivers but can replicate to/from databases (Sql server, sybase etc.) non-oracle

    streams and goldengate roughly the same work but are implemented very differently - flow is much plsql and queues, GG is to learn another language (although scripting tool really)

    hope that helps.

    See you soon,.

    Rich

  • We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication

    Question: We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication.

    Version for esxi: Patch 5.1 level 7

    Virtual center of version 5.1

    Source of storage - IBM v7000

    Destination storage - Hitachi


    Questions:
    Events of breach RPO
    Consolidation for the VM disk failure
    Delta abandoned events
    Time change events
    NTFS error and warning (event ID: 137, 57)
    RDP disconnect and ping does matter
    Standby error
    Volsnap error
    Stop the server and offline issue
    Install vmtools emits automatically

    well, in this case, we need to disable the standby of the end of the replication.

    So that everything in triggering replication does not trigger the snapshot of the suspension.

    Then test the if you get these errors.

  • VMware Fusion 7 and VMware Tools - leak memory in Debian comments

    At some point during my updates from Mac OS X to Yosemite, VMware Fusion to 7.x and my Debian a guest to 8.0 "Jessie" on my 2012 Mackbook Pro, leaking memory of the Linux kernel is developed.  If I follow these steps, then I'd lose soon about 3 GB memory of the core area.

    1. Install Debian Jessie in a new machine virtual de VMware Fusion
    2. Install open-vm-tools or VMware Tools bundled.
    3. Perform an intensive IO as operation simply cat/dev/zero |-c 1000000000 head >/tmp/test.txt.
    4. Smem - wtk and see ~ 3 GB memory under the dynamics of the kernel memory, benefit.

    I opened the 15709682007 assistance request and the representative said that they will fix the problem in a future release. In the meantime, I have what seems to be a workaround for someone else that is affected.  Basically, pulling packages from backports jessie seems to have solved the problem.  This is based on the comments added to open-vm-tools.

    1. Add the Debian repository -backports jessie in /etc/apt/sources.list
    2. sudo apt - get update; sudo apt - get install t Jessie-backports open-vm-tools-dkms open-vm-Tools-Office
    3. sudo apt - get - t jessie-backports dist-upgrade (install kernel 4.1)
    4. Restart comments

    A few quick thoughts:

    1. If you have several virtual machines (or other programs) running on your computer host and VMware Fusion detects that there is memory pressure on your host computer, it uses the "balloon" (vmw_balloon for the latest distributions of Linux) Guest pilot to fly some memory of the guest OS.  This memory "stolen" would appear as memory Dynamics non-cache kernel inside the guest.  Running "sudo rmmod vmw_balloon" should release all memory climbed to the guest OS.  Note that using the balloon driver generally improves the performance of the guest and host, despite the appearance of fear "used memory" inside the guest-"used memory" is just a thing of accounting that we had to use in order to change the priority of the memory between the host and the guest.  It is not "used" in the conventional sense of the term.

    2. I believe that recent versions of virtual hardware non-cache dynamic kernel allocate the necessary memory for SVGA and 3D features (display RAM, texture RAM, etc.).  Disable graphic 3D acceleration or by reducing the amount of graphics shared memory if you are using a new version of virtual hardware (both in the VM > settings... > display) might help.  Decommissioning of a virtual equipment as early (in the VM > settings... > compatibility) can also help.

    See you soon,.

    --

    Darius

  • Differences between POS and Vmware data recovery

    Hi, I wonder if vSphere5.1 has changed the name of recovering data vmware VMware Data Protection (WTP).

    I found that the download link illustrates the Vmware data recovery before vSphere5.0 and Vmware data protection after vSphere5.1.

    I think the same goes for Vmware recvoery data POS, but I want to confirm here.

    Hello

    You can find more information here: https://www.vmware.com/files/pdf/products/vsphere/VMware-vSphere-Data-Protection-Product-FAQ.pdf

    Replace protection data of vSphere VMware Data Recovery?

    Yes. vSphere Data Protection replaces the legacy VMware

    In vSphere data recovery function. vSphere Data Protection

    provides equivalent to VMware Data Recovery scalability with

    a stronger and more effective backup engine.

    Julien.

  • HOL-INF-04 - display performance and VMware vSphere 5.1 - Lab has expired

    Hello

    I started 'HOL-INF-04 - display performance and VMware vSphere 5.1' lab and before I could make the workshop, it has expired.

    Now I can not re - start. What should I do now?  Help, please...

    Concerning

    Nishant

    Nishant,

    It's a little gremlin that snuck into the code, guys it fixed today. It was that if lab has not started and user not leave lab cleanup script would enter in...

    Test, it should work...

    Lets us know.

    Pablo

  • Can the ESXI 5.0 and Vmware View coexist on the same server blade

    Hi team, sorry for the basic question, but can I install the ESXI and Vmware View on the same server?

    Kind regards

    Ismail

    VMware view installs inside a server operating system and he can definitley be installed inside a server running on top of vSphere.

  • I am new to mac and vmware.  I can't figure out how to backup my quicken and quickbooks.

    I have activated the mode of sharing folders on the virtual machine, but does not know how to back up quicken and quickbooks programs.  When I go to backup guests they ask the location of the disk I want to back up but I can't understand how to access the machine time or share files to box.  I'm not that computer, so that helps too.

    I sympathize with you. I am new to MAC and VMWare Fusion myself. I have created a shared folder on my desttop called to speed up backups and backup files to save to this folder by using the change menu in the backup dialog box to identify the folder where I want to store the backup files. I also check the date added to each so I can keep a few identifiable backups separately for my record if they ever need.

    MLS

  • Level of encryption between Wyse ThinOS and VMware View desktop

    Can someone help me determine the level of encryption between my Wyse thin clients and virtual desktops.

    I use the latest Wyse ThinOS and VMware View connection Server 4.0.

    I have a manual desktop pool configured with things THAT RDP disabled. I'm also using smart card authentication.

    With direct disabled RDP is a configuration of SSL tunnel for the connection to the server and the RDP session to the virtual desktop by tunnel through this SSL connection?

    Yes that's right, although strictly that you should say server/connection security as if you use a security server, then this is endpoint of the tunnel rather than the CS.

  • VMWARE Workstation and VMWARE Player

    I have a simple question: what is the difference between VMWARE Workstation and VMWARE Player.

    I have 2 PCs at home and have Windows Vista Home Edition and Windows XP Pro, I want to install Windows 98, to play older games.

    VMWare has free download, will this work? what I need?

    THX

    I used the two products but I prefer VMware products for my virtualization needs, which neither include playing games.

    In all sincerity, if you already have Windows 98 SE and the game sitting there, then I was going just to download VMware Player and test it.  You could probably do that more quickly then go through all that.

    If the Alien vs Predator game talk you is indicated to Aliens versus Predator (video game) and its system requirements, then I would Imaging VMware Player, that's all you need to give it a go and if you don't like not the performance or you can't find a VMware Player fairly easy to work with then try Microsoft virtualization product.

  • the vmdk files are compatible with ESXi 4.1 and Vmware server 2.0?

    I would like the two 4.1 ESXi and Vmware server 2.0 use the same vmdk file, of course, not at the same time just to the emergency plan. Is this possible?

    Hi Spitzmann,

    Welcome to the forum.

    Yes, they use the machine material virtual version 7. Take a look at this kb .

    Useful another link .

    Concerning

    Franck

  • file VHD and VMWare workstation 6.5

    Hello

    I'm trying to convert a .vhd MS (the only file I have) of VMware.  I tried the Conveter v4.0 and VMWare workstation 6.5, and they do not support this.

    Has anyone tried that?

    Thank you

    Jean

    Try Starwind converter

    ___________________________________

    VMX-settings- VMware-liveCD - VM-infirmary

  • different between "VMware vSphere: install, configure, manage [V4]" and "VMware vSphere: Fast Track [V4]" "

    can someone help me understand different between "VMware vSphere: install, configure, and manage "and"VMware vSphere: Fast Track ", first becuse is about $3,000 and another is about $5000. "

    Thank you

    can someone give me some information about the rules of absente, homework and laboratories, in these classes online.

    You must participate in daily.

    You need a good Internet connection and a fixed phone or a headeset.

    Online courses are generally in central time... but in some cases may be different.

    also should I take a test on these classes?

    NO.

    just be present on these days of class?

    Yes

    I mean those class just for learning or at the end of these classes, I have to pass an additional examination for them?

    The VCP410 exam to be held in a centre VIEW (www.vue.com)... for the use of recording the same e-mail that your use of the course.

    André

  • Server 2008 and VMware issues

    I just heard a rumor that there may be some

    problems with Microsoft Server 2008 and VMware version 4.0.   We are in

    the planning process of a move from Novell to AD and I need to check

    If there is a problem.

    in fact, there is a problem (again), involving most of the time the upgrade of virtual hardware version 4 virtual hardware version 7, and she is related to the way Windows 2008 handles the mounting of 2 or several disks (standard windows 2008 t - it a way, Windows 2008 Enterprise made the opposite effect)

    Carefully read this KB: 0 45642524 http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1013109&sliceId=1&docTypeID=DT_KB_1_1&dialogID=45826554&stateId=0

    hope this helps you

    Jose Ruelas B

    http://aservir.WordPress.com

Maybe you are looking for