venue 11 pro (7140) charger power off

Similar Questions

• Satellite Pro A200 (PSAE4E) - power off when the AC adapter is connected

  I bought this laptop for my wife about 2 years, since about 6 months ago, that the laptop was randomly shut off without warning, this only seems to happen while the power supply is connected as well.

  I have read several other posts on other sites with people having similar problems.

  There are various suggested corrections, you must disable the duel core in the bios so that it works only on one heart and he spend dynamic low for fans. I did this about 2 hours ago and touchwood not a single switch off again. This however is not an acceptable solution, there is obviously much more slowly.

  Another suggestion has been updated the bios, I downloaded it now but am very worried to run it, this laptop can stop at any moment, lasting from a few minutes to a few hours. If it stops while updating to bios, I doubt that it would be good news. I don't want to make it work on the single core for the rest of the day/night to see if its stable and then go for it.

  Before that, can I make a call to the toshiba helpline, I read on the forums that this is as well a defect of design within the laptop and there's a reminder of some of the laptops in the Canada, I do not know how it rings true but still a concern to read and might be unacceptable to the owners of the A200.

  Others have advised that it is an overheating problem, it's that I reject, I running SpeedFan and showing a stable 47 temp and it allows to switch off the coast immediately when turned on, yes it could be due to dust build up, something I checked and cleared, it did not a difference for the frequent switch offs.

  Im not too well why it is only when the power supply is connected, I have not tried a different PSU, but those who have had the same problem try this and it has not solved the problem.

  When I unplug my power as well the battery seems last mabye 5 minutes at the most.

  Overall, Im very unhappy all this, toshiba is a brand of 'high' where you expect better quality and pay for it.

  If anyone has any suggestions please let me know, would be also good to hear talk of toshiba support on the issue.

  Concerning
  Florence

  Hmmmmm... interesting.

• The charge of the batteries of Smartphones blackBerry wise - Turn Off vs Full Power Off

  If I turn off my camera with Full Power Off, it will load more quickly than if I just use Turn Off?

  N ° but even if it does, the difference will be negligible.  I suggest to use the turn-off as opposed to full power in the distance, because some features, for example, alarm, still works with Turn Off but not with Full Power Off.

  I hope that helps you.

• Venue 8 pro update Atom Z3000 crashes system

  During the process of downloading the latest chipset update on the Dell Support site, the screen on my coming Pro 8, completely erased and I can't recover.  Any suggestions?

  My HW: Venue 8 Pro; 5830 chipset

  System BIOS: A.14

  OPERATING SYSTEM; WIN 10

  Update: 5830_Chipset_Driver_14P9K_WN32_603.9600.1000.61123_A06. EXE

  Version: 603.9600.1000.61123, A06

  mj100

  I forgot to mention was unable to turn off the system during the power failure.  However, I was able to solve the problem by allowing the battery to empty completely and recharge. The system was able to boot and operating system was available.

• unmatched iwatch of iphone and incorrect password (power off) gray of iwatch

  My iwatch is locked and it is showing the error "wrong access code open the Apple Watch app on your iphone, go to access code, then tap reactivate entry password to try again. I tried the hard reset, but it did not work. I can't reset the iPhone because it is non-matched and when I tried to reset to iwatch again then power off and power reserve options are grayed out.

  Can someone help me please?

  Hello

  Follow these steps to clear your locked Watch:

  • Connect your watch to its charging cable - with power connected.
  • Hold down the side button until you see the cursor off the power.
  • Press firmly (IE more firmly than usual) on Power Off and then press erase content and settings.

  Then re-pair shows your watch by using the app on your iPhone, choose to restore from backup when the possibility.

  More information:

  Set up your Apple Watch - Apple Support

  If you have forgotten the password for your Apple Watch - Apple Support

• My Satellite Pro M70 itself turns off in the middle of the secuence of startup

  My Satellite Pro M70 itself turns off in the middle of the secuence of startup

  After turning on if it passes the test post and enters the menu grub (Linux + Windows) or BIOS
  without problems, but most of the time after the start of the BONE found in the start - up, suddenly it powers off the power.

  The problem becomes bigger and bigger as punishment I can boot any operating system

  As seen on messages more soon as I cleaned the vents of CPU with a spray suddenly sure I wasn't a problem of overheatting.

  Someone has an idea of what can happen?

  Thank you

  Hmm, the laptop passes the MESSAGE correctly and it stops during the initialization of the operating system. Is this good?

  Well, in this case I would exclude the RAM to malfunction.

  I put t also think that it's an overheating problem because the laptop should work a little longer until it would be closed due to high temperature.

  What about the HARD drive malfunction? Are you sure that the HARD drive is ok?

  In my opinion, you should check the HDD and maybe try another.

  Welcome them

• U2415, artifacts monitor after power off for a period of time. Solved by allowing the DP1.2

  U2415 - artifacts monitor after power off for a period of time

  I'm running Win 8 Pro 64 bit, Asus GTX 760. Connected to the U2415 using the miniDP to DP cable.

  It is: after turning off my monitor for a period of time (PC fixed IT), 2 hours or more, after turning it back on, I see lines on the screen.

  I will need to restart the PC for it to be back to normal.

  It will not happen if I turned OFF the monitor for a short period. Only when I turned OFF for a few hours.

  Any ideas? Thank you.

  I downloaded a video on Dropbox. I had it turned on after turning off for about 3 hours.

  [See:www.dropbox.com/.../U2415.mp4]

  Hi Chris, just an update.

  A local forumer had discovered how to solve.

  It was the scene of DP1.2. By default, it is set to "Disable". After that I put to 'Activate' and test it for 2 days, everything seems fine now.

  Hopefully someone will find this useful.

  Thanks Chris.

• OfficeJet pro 8600 more power turn on witness rest "standby mode". is that correct?

  OfficeJet pro 8600 more power turn on witness rest "standby mode". is that correct?

  The power led will Flash slowly power on and off when the Officejet Pro 8600 Plus is in a sleep state.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Bug: iOS 10, Siri invades even lock screen with power off

  iOS 10, Siri invades even lock screen with power off

  Since the upgrade to iOS 10 (iPhone 5 s) siri appears when I forgetting to unlock my phone because I'm not used to this way to unlock yet. But siri on lock screen is disabled in the settings. I can close siri all together, but I don't consider it as an option.

  Is this a bug in the iOS 10 or did I miss something?

  Hello nick_ve,

  Thank you for using communities of Apple Support.

  I see that since you have upgraded to iOS 10, Siri starts each time you try to unlock your iPhone and Siri on the lock screen is disabled in the settings. I completely understand, because when I upgraded, it took me a few tries to get adjusted to unlock with the Home key. I'm more than happy to help you with this.

  Press the Home button on your iPhone 5s once unlocks the screen, and freezes for more than one second will activate Siri. It is good to keep this in mind when you unlock your iPhone.

  There is also an alternative solution I would like to share with you. You can disable this option in settings > general > accessibility > Home button. Turn the finger remains open. You can unlock the iPhone with Touch ID without having to press the Home button.

  Have a wonderful day!

• AppleScript to disable auto power off

  Hey guys,.

  I was wondering if there was a way to disable the automatic stop for a mac using Applescript.

  Thank you.

  Mac OS: El Capitan

  MacBook Air early 2015

  What did you use to enable auto power off?

  Do you mean the stop programmed in system energy-saving Preferences?

• HP Color LaserJet M277dw MFP: Disable auto power off after inactivity for HP Color LaserJet M277dw MFP

  What is the purpose of mobile printing solutions if you cannot activate your home printer?
  My printer stop automatically after 8 hours of inactivity and therefore makes it impossible for me to use mobile printing. The printer is connected via WLAN (without active ports to stop the closing).
  In the configuration, there are only options to stop after 2, 4 or 8 hours. No option on disabling of automatic shutdown.
  Pls do that for the people who work on the firmware updates, they must include an option to disable auto power off, many people are already complaining that and nothing has changed so far.
  Its just illogical. You make big announcements for HP eprint and other stuff, but your printers are not able to do so even if you could theoretically make eprint if your standing next to your printer all day.
  I just got this printer pluged and installed and already tired of this BS!
  I know that there is no solution, so just send it to the people who can change it.

  for all of you who read this post, I was in contact with the technical team of HP and they said that they don't give you the ability to disable auto power off on purpose, it is HPs energy-economy-policy to do and there are no plans to change this in the future
  in my case, I only WLAN's, yet is not automatically stop (although it should be), I guess I'm lucky that my router it ping every now and then and is therefore not stop
  If you can't fix it yourself with active ports and may not have at all, it will probably not option left than the back of the printer

• Is it possible to stop auto power off while downloading?

  Is it possible to stop auto power off while downloading?

  Can you please be more specific with your problem?
  What model of laptop do you have?

  What happens exactly and when?

• Satellite A660 - player optical power: OFF

  I have an A660 and I'm doing a system repair disc, but the message "Windows has not found that a CD/DVD burner rises. I also noticed that the icon on the right side of the taskbar indicates that the "Optical Drive Power: OFF '.

  I am running Windows 7. I think it may be a setting outside the energy saving eco utility.
  Someone please offer little help on this it would be much appreciated.

  Thank you.

  Hello

  By pressing FN + TAB turns the power of the STRANGE power or eject disc tray... Try this...
  If this does not work, check the Toshiba ODD utility

  All programs-> Toshiba-> CD & Applications DVD

  Welcome them

• Pavilion 15: Power off

  I have to use the shift with off switch key (on windows 8) to power the laptop off, if I use only only its turning off the display only, but is always cut power off button.

  Hello

  Try disabling the hybrid Windows 8 start - you can do the following.

  Right-click the battery icon, and select Power Options.  In the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close all open windows and check if the laptop will now be shut down properly.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K