Verify the existence of the file

Similar Questions

• Problem installing Firefox 3.6.8 as error "no request for assistance" to open the file

  Used a netbook Asus Linux / Firefox version 2.0.0.0.11 for 3 years without problems. Now I can't use "Hotmail" on it, because it requires an update to the version as above.

  It appears to download but not to open it and I get the message "could not be opened because there is no such thing as the doe to request assistance associated with" I'm not sure where I should be downloading it too but chose home/user.

  I use very basic but verified the file 'open with' settings and there is no demand for a tar.bz2

  Any advice would be much appreciated

  Have you read all the 12 pages of this thread?

  http://Forum.EeeUser.com/viewtopic.php?id=41815

  I can't help myself, because I have done this process once and I wasn't happy with Firefox 3 on Asus / Xandros when I was tired. The next day, I installed Ubuntu 10.04 - EasyPeasy remix - http://www.geteasypeasy.com/

• Verify the existence of the file on the disk does not not (utl_file.fgetattr)

  Hello

  With the help of 11.2.0.3 and have the following code in an attempt to verify the existence of the file.

  Directory and file are certainly and user/schema was the allowance all the specfifed directory for them.

  Another thing to do?

  Wjen, run it says file does not exist - I tried uppare and tiny.

  declare

  v_file_exists BOOLEAN;

  v_file_length NUMBER;

  v_block_size NUMBER;

  Start

  -Create a process to load data to archive

  -A process necessary to run on a regular basis to query the datain.txt_finance_gl table. If an error is triggered which shows that the file is not found then it stops and expected to run next time.

  -If the data is returned, then the data can be queried and loaded into the table in the archive with the relevant number of sequence and datestamp.

  -The txt_load_control will be used to control and verify the transfer.

  -The next sequence in the txt_finance_gl_seq number is obtained as well as current datetime object and create a new entry in the control panel (edc_type will be "GL") and give a working state.

  -At the end of the load, the flat file will be renamed (pre-fixing on the old name, sequence number) and moved to the processed Finance folder.

  -The control panel can then be updated to show the run as it is complete.

  -First check to see if the file already exists on the disk in the box provided.

  UTL_FILE.fgetattr ('big_tab_data', 'testfile', v_file_exists, v_file_length, v_block_size);

  IF v_file_exists THEN

  dbms_output.put_line ("'File Exists");

  ON THE OTHER

  dbms_output.put_line ('file does not exist');

  END IF;

  end;

  user5716448 wrote:

  Location was just prove that the oracle schema user can see the directory and database files.

  create or replace directory BIP_TAB_DATA

  as ' / oracle/finance/export ";

  give all the BIP_TAB_DATA of archiving directory;

  declare

  v_file_exists BOOLEAN;

  v_file_length NUMBER;

  v_block_size NUMBER;

  Start

  UTL_FILE.fgetattr ("BIG_TAB_DATA", "samplefile", v_file_exists, v_file_length, v_block_size);

  IF v_file_exists THEN

  dbms_output.put_line ("'File Exists");

  ON THE OTHER

  dbms_output.put_line ('file does not exist');

  END IF;

  end;

  [BEEP] / finance/export-oracle $ sqlplus archive / pwd @por.sql

  SQL * more: Production release 11.2.0.3.0 the sea Mar 4 16:06:12 2015

  Copyright (c) 1982, 2011, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  18.

  PL/SQL procedure successfully completed.

  SQL > set serveroutput on

  SQL > /.

  File does not exist

  PL/SQL procedure successfully completed.

  SQL >

  [BEEP] / oracle/export/finance $ ls-l

  total 1192

  -rw-rw-rw-1 orabip s/n 152953 16 Feb 14:42 weekly sales (SAP) .txt

  -rw - r - r - 1 orabip s/n 49 Mar 04 13:44 afiedt.buf

  -rw-rw-rw-1 orabip s/n 172280 17 February 14:38 new weekly sales (SAP) .txt

  -rw - r - r - 1 orabip s/n 374 Mar 04 16:05 por

  -rw - r - r - 1 orabip s/n 374 Mar 04 16:07 por.sql

  -rw - r - r - 1 orabip s/n 0 Mar 04 16:04 samplefile

  -rw-rw-rw-1 orabip s/n 172280 17 February 14:38 sap_weekly_gl_data.txt

  -rw - r - r - 1 s/n 55 16 Feb 09:52 testfile.bad orabip

  -rw - r - r - 1 orabip s/n 13535 16 Feb 22:00 testfile.log

  -rw-rw-rw-1 orabip s/n 42-16 Feb 09:53 testfile.txt

  -rw-rw-rw-1 orabip s/n 62908 12 February 16:45 test.txt weekly sales

  [BEEP] / oracle/export/finance $

  These two are not even!

• Code 80070241 in Windows update and "Windows cannot verify the digital signature for this file" when you try to run any program.

  Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.

  I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »

  After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).

  The restoration went well, restarted, but the problem persists.

  Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.

  The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.

  The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.

  It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.

  On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.

  The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.

  Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.

  However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.

  ***************************************************

  Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?

  Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.

  This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.

  So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.

  Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.

  * shrug *.

  Computers.

• DOS command to test for the existence of a file in a directory?

  What is the equivalent of BACK of the [name of file - s] UNIX command test the existence of a file in a directory?  If all goes well, there is one that returns a 0 = 1 = failure or success.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for MSDN. Please post your question in the MSDN forums. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/categories

• My PC does not allow me to down load anything, that is to say that the files cannot be verified, and he also says that my certificate is not valid. does anyone have ideas, what it means

  I am trying the load Kaspersky Pure, but it says that the file cannot be verified

  I am trying the load Kaspersky Pure, but it says that the file cannot be verified

  Two questions for you:

  1. Please quote the exact verbatim of the message you get.

  2. you say "Download", but don't you mean "Download" or "install"? Don't miss the download or installation fails after you have successfully downloaded the file.

  Just in case you are confused as to what the words mean, please read the following:

  The word 'Download' means to copy a file (perhaps a program file, but not necessarily) from a server somewhere on the internet for your computer. Please invert not that Word with 'install', which means to load a program on your hard disk in a form from which it can be executed.

  Generally, you install a program from a CD, a floppy disk or on the internet. Only in the latter case, the internet, is there any download involved, but even then, it's a two step process: first download you from the internet, and then you install it.

• I'm upgrading from Vista to Windows 7 and download repeat myself "content of the file could not be verified."

  I tried to download the upgrade from Vista to Windows 7 (32 bit) and get the following message is displayed.

  "The file could not be verified."

  Please directly contact the Microsoft Store.

• 0xc0000428 error - "Windows cannot verify the digital signature for this file."

  Original title: 0xc0000428 error

  I'm using Windows Vista and I already had the problem, "the Windows Boot Configuration data file is missing required information" which I have rebuilt the bcd for. Now it won't let me not restart due to the error 0xc0000428, stating "Windows cannot verify the digital signature for this file. How to do this?

  Hi Rajisace,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  ·         Please provide us with the file information in the error message.

  Method 1: Try to start the computer using the last good known Configuration and check if you can successfully start.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: I will suggest you to do material clean boot and check to see if you encounter the same problem.

  1. right click on my computer-> properties

  2 Hardware tab Device Manager->

  3. right click on the sound card, video card and NIC, one by one, then click on turn off

  4 restart the computer.  If the problem is resolved, you can then enable the devices one by one to find the exact mechanism causing the problem

  After you find the device that is causing the problem you can solve by installing the latest driver or replacement of the unit.

  I will also propose you to check if the boot priority is set on hard drive and check if you experience the same problem.

  Method 3: Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important:  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

  Hope this information is useful.

• Status: 0xc0000428 Windows cannot verify the digital signature for this file.

  This is the message that appears:

  Windows Boot Manager
  A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source.
  If you have a Windows installation disc, insert the disc and restart your computer. Click 'Repair your computer' and choose a recovery tool.
  Otherwise, to start windows, so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Startup Options, then select last known good. If you understand why the digital signature cannot be verified and want to start Windows without this file, temporarily disable driver signature enforcement.

  status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file.

  * So what the hell is happening? Sorry, but am getting very frustrated by that. I noticed that windows creates a file called windows.old. Avoid the old windows, it's an empty hard disk, and it was an installation of full version. NOT an upgrade. As to why my product key does not work... not even me angry by publishing what I've seen elsewhere in these forums. I DO not pay another $200 for a different product key. This one should work. I just opened this "thing" to do the installation. So if this key was stolen, it was stolen that microsoft has packaged discs.

  Can I safely delete this file called windows.old (assuming that I can always go back to windows 7)? Do you think this has nothing to do with the problem? Or should I do what ppl do upgrades mean that they have to do... Reinstall win 7?
  * He let me use F8 for advanced options to disable the driver signature.

  Thank you! Got the product key problem is resolved. I saw on another post, you stated

  
  "The start menu with EasyBCD by NeoSmart Technologies edition should solve your problem, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new window manager.

  http://NeoSmart.NET/DL.php?id=1   "

  Now that address my other question as much as me have allowed difficulty delivers windows boot is seen? I see that windows 7 is a file boot.ini as previous versions of windows. I would like to see the "command-line" some win 7 has instead of boot.ini file uses. I suspect something may be there that causes the driver signature error... and tried the 'bootrec' methods above doesn't solve anything for me.

  Thanks a lot for your help in this matter. (Once I get the verify signature driver disabled it goes straight in win 7 and win 7 works fine.) It just will not be disabled whenever I start my pc. I always have to fight to get the window that gives me the ability to disable.)

• Windows cannot verify the digital signature for this file.

  A few days earlier, I had to install Windows 7 Ultimate, who apparently has a problem that is displayed every time that I am to run a . EXE program, which is basically most of the programs... I am really suffering right now and I need to find a solution for "Windows cannot verify the digital signature of the file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source.

  I NEED HELP PLEASE GUYS!

  I've never had need to try this, but a search found - http://answers.microsoft.com/en-us/windows/forum/windows_7-system/windows-cannot-verify-the-digital-signature-for/69666d83-d7b4-4dc0-89e5-fa7b8241da50 good read and if it matches your problem, maybe give it a try.

  If all goes well, she can help him (if that's the same number/error message).

• Upgrade CPU, system does not boot, winload.exe "Windows cannot verify the digital signature for this file.

  Subject pretty much said it all.  I got a new CPU, shut down the computer, installed, and now Win7 does not start.  It hangs on a black screen gripe on a signature file.  Here is the full text:

  "A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source."

  If you have a Windows installation disc, insert the disc and restart your computer.  Click 'Repair your computer' and choose a recovery tool.

  Otherwise, to start Windows, so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, select last known good configuration.  If you understand why the digital signature file cannot be verified and want to start Windows without this file, temporarily disable driver signature enforcement.

  File: \Windows\system32\winload.exe

  Status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file. »

  Well, the first thing I did was put in the installation CD and reboot to try the thing "repair your computer".  Charge, said he found a problem, said he has fixed the problem and restarted.  But it always hangs on the same screen of the error.

  So I tried to hit Enter and then F8 as it said to do, but brings me right to the error screen.  I'm stuck, there is nothing that I can do, and I need this computer to work tomorrow.

  Another interesting note is that the recovery on the installation CD tool identifies my system installed Windows Vista... wtf.

  Help?

  I don't know if this post will solve your problem, but it can give you new ideas or angles to try.

  http://www.lifeworldblog.com/computers/Windows-7/Windows-cannot-verify-the-digital-signature-for-Winload-exe

• Windows Setup checks the checksum of the installation of the files to verify that they are original?

  * Original title: windows install

  Windows Setup checks the checksum of the installation of the files to verify that they are original?

  Yes, she also continuously checks even after installation and replace the files which is tampered with.

• Y at - it another way to check the existence of the file other than utl_file.fgetattr oracle

  Hi, I'm checking the existence of the file in pl/sql with utl_file.

  DECLARE

  Yn BOOLEAN;

  FLEN NUMBER;

  BSIZE NUMBER;

  BEGIN

  UTL_FILE.fgetattr ('RMCMIFIDDWH_OUTPUT', - directory

  'filname.txt', - filename

  Yn, - Boolean Yes or no.

  FLEN, - length of file

  BSIZE);-block size

  IF yn THEN

  dbms_output.put_line ("'File Exists");

  ON THE OTHER

  dbms_output.put_line ('file does not exist');

  END IF;

  dbms_output.put_line (' length of file: ' |) To_char (Flen));

  dbms_output.put_line (' block size: ' |) To_char (BSIZE));

  END fgetattr;

  Please help me if there is another way to do the same thing.

  There is no problem, but I was looking for a simple method to check only file existence and for this reason only I have my question here with the solution.

• How to use PS to judge the existence of a file in the directory specified and how to use PS to the directory specified for create to create the file? (javascript)

  1, how to use PS to judge of the existence of a file in the specified directory? (using javascript)

  2, how to use PS to the directory specified for create to create the folder? (using javascript)

  
  

  Thank you!

  If (Folder(/*_insert_the_path_here_*/).exists == false) {Folder(/*_insert_the_path_here_*/).create()}

• AUSST - not able to display XML files in order to verify the proper installation of IIS

  We implement our Adobe update server in a Windows Server 2003 R2 32 bit environment.  I followed Adobe technical notes on the configuration of the server with IIS 6.  I changed the settings in IIS, including the addition of the definitions of .xml to the asp.net web.config file located in C:\windows\Microsoft.NET\Framework\v2.0.50727\CONFIG.

  The question we have is this: I am trying to check the file updaterfeed.xml according to the documentation, but it is not displayed.  I enabled the exploration of directory, which allows me to click each folder until I get up to the following path:

  http://ourServer/updates/Adobe/CS/webfeed/OOBE/aam10/win/updaterfeed.XML

  None of the xml files are displayed.  I checked for XML MIME type in the form:

  text/xml

  These are the lines I added to asp.net web configuration:

  "< add the path = 'generated' verb =" "*" type = "System.Web.StaticFileHandler" / >

  "< add the path ="*.xml"verb =" "*" type = "System.Web.StaticFileHandler" / >

  "< add the path ="*.dmg"verb =" "*" type = "System.Web.StaticFileHandler" / >

  "< add the path = '*.crl" verb = "" * "type =" System.Web.StaticFileHandler "/ >

  "< add the path = verb"*.sig"=" "*" type = "System.Web.StaticFileHandler" / >

  In addition, according to the technology Adobe note for establishing AUSST provides:

  As a simple test to verify that the web server is running correctly, make sure that the updaterfeed.XML files on

  the update server is accessible from browsers on client machines. Essentially, you must ensure

  that the web server works, independent of the Adobe update server configuration tool.

  Can you tell me what I missed, or point me in the right direction?  There is no ASP.net error in Event Viewer.

  Hi, thanks for sharing newspapers. of newspapers, it seems that this updatefeed.xml file has been corrupted.

  There are 2 steps to solve the...

  Remove /updates/Adobe/CS/webfeed/oobe/aam20/win/updaterfeed.xml (make a backup of it) by AUSST server setup and then run AUSST mode incremental synchronization (option 2).

  If this does not resolve also the question then please share the newspapers again. also agree with the updaterfeed.xml file.

  Thank you

  Rahul | [email protected]

• Money needs to verify the information contained in your file

  Just I was greeted as a novice in the Microsoft Community. I've been using Microsoft Money since 1999 (although, since his disappearance, now to a Mac using a virtual machine.) I have all the financial information of 1972 stored in my Money file and today, if only it does not open. I have now spent 9 hours trying to get through this and tried all the solutions offered by Microsoft, but I can't seem to open the file without a password - the same password I have used for the past 17 years. I deleted all traces of money from my computer, delete all items in the Keychain passwords on Windows XP and Mac. I reinstalled the sunset and even try to open a new file, I hit the block password - even after clicking on I don't want to use a password... all bright ideas?

  It's no wonder that I switched to Mac about 6 years ago!

  Heck, I come to the end and I have to choose a category. There is no category for Microsoft Money. Typical! What a bloody waste of time and effort

  Hello

  For questions of Microsoft Money you please directly post the Forum money from Microsoft.

  http://social.Microsoft.com/forums/en-us/home?Forum=money

  See you soon.