Version of the NAC

Similar Questions

• Activation of the NAC HA puts several hosts and ASA with processor clocked at 100%

  I installed a NAC Manager and a NAC server in OOB without any problems, but when I configured the AP (high availability) with another server, my ASA and several guests in my network started work ant 100% of the cpu.

  I tried to configure each interface of the NAC on a single DMZ and the problem stops there.

  -That someone had this problem (NAC version 4.7)

  TKX

  Miguel Amaral

  Hello Miguel.

  When I started a NAC InBand HA solution I had a similar problem that I solved the heart rate HA configuration to use ETH0 just instead use ETH0 and ETH1.

  Best regards

  Luciano Carvalho

• Upgrade the NAC of 4.5 to 4.8

  Hello everyone

  I'm about to upgrade to a CNA of 4.5 to 4.8 on an application I do in a bank with 1500 users. The upgrade is due because the Bank makes its migration from PC to Windows 7

  The implementation is in a failover situation (2) and (2) CAM. the design is Out of Band, a virtual gateway and integration with a wireless LAN controller.

  I would like to know if when I upgrade the CAM and CAS´s for version 4.8 can I still use the Agent access own version 4.5 on clients? To perform the migration in several steps

  There is a StubAgent for version 4.8? or already included in the Agent 4.8? I install the StubAgent on all computers of the Bank, because they have no administrative rights.

  What is the best way to perform the upgrade of agents which does not affect users?

  Thanks in advance

  Eduardo Navas

  Hi Eduardo,

  Agent 4.5 is compatible with 4.8 CAM/CASE, although with a few restrictions:

  http://www.Cisco.com/en/us/docs/security/NAC/appliance/support_guide/agntsprt.html#wp52084

  For example, see also the following notes:

  "If you use version 4.8 of CAM/CASES with a version of the Agent plus early 4.8.0.32, then either use the requirement of the Distribution link or upgrade the Agent to the latest version to use the Distribution of files".

  "Cisco NAC Agent version 4.5.x is not supported by download version 4.6 (1) CAM because the structure of Agent installation files is different in version 4.5 (x) compared to the support in version 4.6 (1) agents."

  The NAC 4.8 agent has not any component necessary as the previous stub, for example:

  http://www.Cisco.com/en/us/docs/security/NAC/appliance/configuration_guide/48/cam/m_webagt.html#wp1473153

  Kind regards

  Fede

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Profiler in the NAC 2.1 to 3.1 upgrade

  Hi guys,.

  I'm setting up a Profiler from the NAC that accompanies 2.1 installed. I upgraded to 3.1, prayed and installed the license without any problems, but I always get this message: "ERROR: [2010-12-08 09:25:01 (main: 668)] valid no key not found [no such file or directory]" "

  The license file exists, and on the interface Web Profiler from the NAC, the State of the license is OK.

  A single line in the license file gives me this information: 'cisco 2.1 INCREMENT CCA-MANAGER countless Permanent '.

  Does anyone know if the license is linked with the version of Profiler?

  The upgrade from 2.1 to 3.1 is allowed or it is necessary to purchase a new license 3.1?

  Best regards

  Hello

  So I guess you spotted the problem here...

  You have a collector's license?

  You need 2 licenses: 1 to the server profile, and one for the collector.

  Basically, the mac address you provide is the same (eth0 ot Server Profiler), but you need a PAK Server Profiler to generate the license Server Profiler (the one you already have) and a PAK for license collector (which is missing).

  You have the collector PAK?

  If Yes, then just go to the license page and submit this PAK and the mac address.

  HTH,
  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• The Stub of the NAC for 4.7 Agent options

  Hello

  Does anyone know if Cisco provides an option of replacement for the role of the NAC Agent of the Stub in version 4.7?

  Thank you.

  Dennis,

  The service is installed as part of installing the agent. Now the agent installation requires administrator rights.

  HTH,

  Faisal

• Problem of the NAC - Agent is a disconnect

  Hello

  We have a problem with the NAC in mode virtual outofband.

  AD SSO, sanitation, everything is working, but the strange things happening: after awhile, when downloading large files, Agent connects to the formula of network users, and the registration process is restarted.

  I disabled the pulsation clocks and timers, session, but we still have a problem.

  Also, while sniffing traffic on the switch port, I noticed that after have correctly connected you to the own Cisco Agent network always send traffic to UDP Port 8905. Is this a normal behavior?

  I noticed problems with this version of the agent causing connections to give up intermittently. I would upgrade to agent v4.1.3.1.

• Update of Linux in the comments of the NAC 3315

  Hi all

  Y at - it an option to update the OS of linux pre-installed in the NAC later?

  Thank you

  Kind regards

  Vijay.

  Hello

  You do not have this option, that the Cisco NAC product line comes with a version of linux that is suitable for the solution.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• The NAC replacement procedure

  Hi Experts,

  Our 3315 NAC does not work because of a hardware failure. So let's replace that. Therefore kindly confirm the steps to take the backup and the procedure to install it?

  Thank you

  Kind regards

  Vijay.

  Since there seems to be no method to perform a backup of the CLI on the appliance 3315, we go the route of the workaround. This may seem a little out there, but the only way I can see a backup being created without using the WebGUI interface.

  First of all, you have IP access to the device of the ANC?

  If this isn't the case, quit reading and contact TAC.

  If you have backups of configuration in the past, they are stored in the/guest/bakcups directory and can be transferred via FTP, SFTP, etc...

  If not, then download a upgrade file that is newer than the version you are running (if you are running the latest version, download the upgrade file for this version). In this case, v2.1.  Transfer the file to your repository and run the upgrade on the comment of the NAC server.

  Note Before the 2.1 update, a snapshot backup of the existing 1.x or 2.0.x database is automatically created and stored in the guest.bak directory. In the case of an upgrade failure, Cisco recommends to make a local backup of this directory.

  http://www.Cisco.com/en/us/docs/security/NAC/guestserver/Release_notes/21/gsrn21.html#wp111257

  Otherwise, I am at a loss on this issue.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• The NAC Agent autoUpgrade ISE possible?

  Hi all

  I have this:

  802.1 x-window with the NacAgent version (say 1) <---->802. 1 x switch active (RADIUS aaa OK) <------>ISE and AD on the same LAN

  ISE is configured for client provisioning with hardware (NacAgent version 2) downloaded from Cisco's Web site (as described in the documentation)

  I have a basic plan of authentication and authorization that allow me to well but I expect the NACAgent to be upgraded.

  No profiling is configured at the moment.

  Is that someone can help?

  Best regards?

  Hello

  In the ISE settings provisioning client, activate you the option where the NAC upgrade agent is required. However, it is to you to run updates perioidic and map the most recent agent in the configuration of the parameters of the client.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Just updated to Mac OS Server says I need an earlier version of the server cannot be updated

  I've just updated for Mac OS Server 5.2 (from 5.1) will not let me connect to my server saying that I need an earlier version of the server as this version (5.2) cannot be updated.

  How can I go back to 5.1?

  The error:

  Impossible to set up the server.

  This version of the server does not support upgrading server data on this volume. To upgrade your database server, you need to install an older version of the server and OS X.

• What are the "exclusive" for the version of the Apple Watch Nike Siri?

  I'm interested in the Nike + version of the series 2 Apple Watch, but not knowing if additional features are really a selling point for me. I have connected more than 2000 miles on the Nike application on my iPhone, so I will definitely stay with the same application on the watch... but what are the commands of Siri for Nike + which won't be available for non-Nike version?

  Hello

  During the keynote of yesterday, it was mentioned that a shortcut to start a race is just tell Siri to 'run '.

  In addition, neither Nike nor Apple has yet specified what are the other commands.

• Where can I find the latest version of the software to download on my iPod Classic 160 GB end of 2009?

  Where can I find to download the latest version of the software for my iPod Classic (160GB end 2009)?

  I'm still enough of a novice at this and would like to, if possible, a detailed response. Really appreciate it.

  Thank you

  Mando

  Click here and follow the instructions. The entire process is managed within iTunes. you don't need to search for the download.

  (144457)

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.

• After the update version of the iOS 9.3.4, all my music software has disappeared. Any ideas how can I get it back?

  I upgraded to the latest version of the iOS (9.3.4) software and now ALL my music was erased. so boring. Any ideas why this happened? That's why I hate the software update! Can I recover all my music? (this isn't all iTunes)

  Settings > music > music library iCloud

  You can also check here download your past - purchases Support Apple

  Hope this helps, good luck to you.

• With 43 on Mac version in the title bar transparency disappeared, what happened?

  Before the upgrade to version 43, the title bar/app window was transparent to match Yosemite/El Capitan, and now it's over...

  I'm not using a theme, and I'm not in private browsing mode.

  By help on Reddit:

  This bug deleted dynamism (blur effect) in 44: https://bugzilla.mozilla.org/show_bug.cgi?id=1161565 the patch has been raised and then to 43.
  You should be able to bring back vitality by using a custom stylesheet:

  1. TitleBar {}

   -moz-appearance: -moz-mac-vibrancy-light
  

  }
  You can also get dark shine using - moz-mac-dynamism-black

  Here is a similar workaround: http://apps-reviewed.blogspot.com/2015/01/make-firefox-translucent-in-os-x.html