Vertical red lines in images Photoshop CC band - suspicious is the latest Nvidia drivers

Similar Questions

• vertical red line on my photos from my sony DSC w210, any solution?

  I have this camera sony DSC w210 for 3 years now. Since a few days I see a red, very thin, but noticeable, line running vertical in the center of all the photos I take. It was not there in the previous photos, so don't know what is happening in these last days.

  Any Solution?

  Concerning

  GYAN

  Please post/upload a sample image

• HP 8500 has showing vertical red lines on all the documentation scanned with the ADF

  I had scanned a doc with red ink which I guess was still a little damp.  I have cleaned the rollers, but still get a few red vertical lines on copies scanned on the ADF.  Help please.

  Hello

  Some of the red ink may have been transferred to the scannerglas in the ADF, so clean it only to.

• All of a sudden developed a vertical red line dividing my screen. Can't seem to remove? What I've done wrong? Thank you...

  See above, please

  Hi stormy46,

  There was a similar position recently marked as answer. Have a look here and see if it helps to solve your problem: http://social.answers.microsoft.com/Forums/en-US/w7desktop/thread/c61122a5-754c-447c-9118-8b6cf2306248

  All the best,

  Sharon

  Sharon Roffey
  Queensland, Australia

• Images Photoshop look washed out in the first

  Some of my photos from Photoshop CC 2015 (and bridge) established first as psd files (and some jpg) appear washed out and less than the original. Many times they are not, however. I tried 'Original Edition or retouching in Photoshop' first, but that doesn't help - the Photoshop and Bridge image simply looks different from the first a. I need first look the same good Photoshop image edited.

  One point: I have worked in Photoshop CC 2015 (subscription of $9.99 / month Photographers') but in Premiere Pro 5.5. When this issue came up, I started a trial of first Pro CC version, and the problem persists.

  Help, please.

  KDOC

  Thank you very much for the offer. While I was waiting I kept trying this or that. I think it is now resolved: If you're doing a "save under", instead of a backup and then uncheck the box "ICC profile: Adobe RGB 1998", the changes made in Photoshop and then reflected in first. " I have not yet seen of workaround still works, but hope.

  If I'm going to continue to work in PrP5.5 or go to PrPCC is always open. 5.5 works faster for me because I have to recognize my card Nvidia 260 (minor hack), and the Mercury engine is effect. I can't get the PRP to do, and will have either a hack or a new video card. All the suggestions of the hack or an affordable card?

  Thanks for responding.

  KDOC

• Red Line (not sure what it's called) in the timeline doesn't move when you RAM Preview

  Hey,.

  So I have the problem basically what the title says.

  

  (just realized I accidently put another in)

  So yes, it is really annoying me.

  Help is appreciated!

  I'm using MacOS sierra.

  After Effects CC 2014

  I'm using MacOS sierra.

  I see in the page system requirements that CC 2014 only supports Mac OS X v10.8, v10.9 or v10.10

  After effects configuration required for Mac OS and Windows

  This is probably the problem.

• License problem after the Photoshop and Lightroom upgrade to the latest version of 2016.

  Hello

  I can't using photoshop and lightroom, because both were languages like trial 30 days.

  but ADOBE has always supported my money every month to join the package for photographers (~ 10 Euro/month)

  Since 2014.

  Problems proved that since I upgraded to Adobe software AC 32 days ago in new versions!

  What should I do now, team Adobe?

  I want to have access to Photoshop and Lightroom, because I pay a price for participation in this package

  or I'll ask Adobe to return my money!

  Kind regards

  Adam Komar

  0048 500 49 75 20

  Back to the https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html of the trial

• I've updated PhotoShop to CC 2014 to the latest version, but the library feature is still missing, why?

  
  who can help me to solve this problem, thanks a lot: ~.

  Thanks for all your kind reply

  I tried to uninstall and install, disconnect and connect, restart the computer... He is still missing.

  Fortunately, I happen to check two Plug In options such as the following screenshot, it works. So happy ~ ~

  

  Just FYI, if you have encountered this problem, it could be useful

• Everyone recognizes these red lines (which appear and disappear on the passage of the mouse sometimes)? Photoshop has also been blocked a lot after.

  

  It was "directly related to your video card.

  The card is supported, but you need to get the latest Nvidia drivers

  Adobe Photoshop CC GPU (graphics processing unit) and card FAQ video

  Current video driver is:

  Version:	353.62 WHQL
  Release date:	2015.7.29
  Operating system:	Windows 7 64 - bit, Windows 8.1 64-bit, 64-bit, Windows Vista 64-bit Windows 8
  Language:	English (United States)
  File size:	278.91 MB

• Central and vertical thin red line on the screen when viewing videos

  Vertical red line occurs every time before and after having developed the video to full screen.   Can someone please help me fix this?

  Thank you for your time on this.

  Best regards.

  Windows 7 Professional (x 64)

  Internet Explorer 11, version 11.0.9600.18349

  Adobe Flash Player version 22.0.0.192

  I am happy to say that I have now managed to solve the problem.  It was caused by a driver damaged video of AMD and not Adobe Flash Player, version 22.0.0.192 at all!    Thank you very much for help me by this forum.

  Best regards and best wishes to all.

  Ray

• Lines of Prime CC 2015 Vertical red & yellow/green when it is paused

  I have updated to OS X El Capitan last night and met this error in first Pro CC 2015. Everyone knows about this problem?

  Video plays well back, but whenever I stop all footage there are vertical red lines and the rest of the frame is a greenish-yellow color. Strangely, when I full-screen playback window, this problem disappears. I suspect that this problem is to do with OS X El Capitan (somehow), and I hope that Adobe will address an update soon!
  Any help would be greatly appreciated!

  When in pause mode, it's what it looks like:

  

  During playback, it seems to be very well:

  

  It's called problem with El Capitan. This is known for the last few months since the beta version of El Capitan. The only question seems to be when the video is paused as you said. There has been several comments in this regard.

  The best thing to do is to never update a workstation with a new version as soon as it comes out. Just update a secondary machine to test on (if you have one).

  In my case, I have a 27 iMac with 4 GB, AMD retina, and it's my main workstation. He has Yosemite 10.10.5 and short smooth like butter.

  I have an iMac 21 "with a 1 GB of Nvidia, and this is my test so to speak machine. I El Capitan on this machine and have the same question.

  I hope that Adobe will be a patch soon.

• Red Line is the time average Budget?

  I have a question about the red horizontal line in the editing of the frame window. I understand, it keeps track of the "time budget". If all the bars are underneath, the swf file runs at the desired images per second. If some of them are above him, your slow running swf file. Right?

  My question is this:

  The red line is related to the performance average over a certain period of time?

  I ask because I noticed that all my bars (in the editing of the frame window) are below the red line. But when I click on a few individual images, the Summary window tells me that the Framerate is under the framerate of the target, i.e. the bar should rise above the red line.

  So I'm a bit confused. I have attached a screenshot that I hope enough clear to read.

  The desired flow is 40 fps and the instantaneous current framerate is 29.9 fps. But the bar is below the red line.

  

  Also, I had assumed that the scale on the vertical axis of the histogram of time the image has been linear.

  i.e. If a framework took twice as long, the bar would be twice as high.

  But I noticed that it doesn't always seem to be true.

  My guess is that framerates vary naturally from one image to the image a bit and Scout made a sort of average time and smoothing. But I could be completely wrong! I always try to work my way around Scout. Thanks a lot for your help!

  Damian.

  BTW, the Scout is amazing! An incredible tool.

  Your code is the colorful stuff, not the grey matter. More colorful stuff is under the bar, more your code runs. Your code looks good here.

  You run with 31% of your budget by image 25ms (he says in the summary Panel). 25ms is 1000ms/40 fps.

  The red line represents the desired SWF frame rate. This is usually set when you create the SWF file in Flashpromanager.new, FlashBuilder, or other tools. It can also be defined as directly in ActionScript code. Because yours is at 40, you must have already established it somewhere.

  You must watch the gray bars. Represents grey time waiting for the next frame, not the time spent running your framework. Grey is good. If you don't see any grey below the red line, your code takes too long to run in this context. The gray bars show you the actual intervals between each image. In your case these are alternately above and below the line. If you select a range of images, you will find that the average lies at 40, but each individual image will be more or less. The flash player has an internal algorithm on average these intervals to make your desired rate. The player prefers rate divide evenly into 60, 60, 30 or 15. If you choose other tariffs, it adjusts managers so that they are part of this trend. So you see altering executives who kindly to 40 fps on average. It is the normal player behavior. It does this so that several sessions of flash put too much demand on the CPU to wake only intermittently reliable.

• Dark on the screen colors become red lines - Satellite P200D - 11L

  I have this problem since yesterday: sometimes the dark colors on my screen becomes red lines.
  It is not a problem with the display LCD, in my opinion. It happened on the home screen when I turn on my laptop.

  So it is not with the OS or drivers.
  The problem would be with the graphics card?
  Will I need to communicate with the specialists of toshiba? I hope that's not very serious.

  If possible try to test with the external monitor. When the same appears on the external monitor, faulty graphics card is responsible for this. In this case, you need professional help.
  The warranty is still valid?

• I can't remove a thin vertical yellow line on my screen of vista

  I have a yellow thin vertical line appear on the side of left hand of my screen of vista, which I'm unable to remove.how can remove it and why is it suddenly appeared?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  Then:

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Follow the red line

  How can I remove the red line that appeared in the middle of the screen two days ago?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  If the above does not resolve the problem, you may have a hardware problem.

  See you soon.

  Mick Murphy - Microsoft partner