VERY slow mouse on my computer 9
I have been using the same computer to Core i7-920 for four years now. Since I upgraded to VM Workstation 7 to 9, the mouse is very slow. I have to double, triple and sometimes quadruple click here to get an answer. There are times when there are 30 second delay between clicking and something happens. This occurs on the virtual machine that I've had for a while and the new virtual machine that just places I. I bought a new, faster, internal hard drive for the virtual machine on and which did not help. It's to the point where using VM Workstation costs me more time than it saves. Any suggestions?
The log file contains a large number of waiting times for the floppy drive, inputs on updates to automated tools as well as automatic snapshots. Please check the VMs and disable 'Connect to light' for the drive diskette and CD-ROM, and then in the 'Options' tab value "VMware Tools" updates 'Manually update' and 'Snapshots' set "Just power off" (unless it's something you want or need).
André
Tags: VMware
Similar Questions
-
USB 2.0 data transfer rate is very slow in Windows XP computer.
Original title: USB 2.0 work very slow
USB 2.0 data transfer rate is very slow, what should I do?
Hi MahendraSoni,
1A USB 2.0 works much earlier?
2. don't you make changes on your computer before this problem?
There is a fix for this problem. You can contact Microsoft Customer Service & provide article kb 908673, which contains the fix.
Hope the helps of information.
-
Why all this very slow loading on my computer lately?
When I click on a program to open it, it is very slow to open an it.when I am online, sometimes it just freezes
Hi dls4u2c,
- Did you the latest changes on the computer?
- You receive an error message on the computer?
- You have security software installed on the computer?
- When was the last time it was working fine?
Method 1
Check if the problem persists in the safe mode and after back with the results.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Method 2
If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
How to make a computer faster: 6 ways to speed up your PC
-
Victorinox original title: my PC is in need of serious help!
I will have questions both of I don't know where to start?
#1) I think Miss me the hardware drivers, what can I do to check and make sure I have the latest driver updates for my hardware?
(#2) I have programs such as MS messenger, some programs MS Live Essentials that I can't use, fix, uninstall or reinstall.
(#3) MS Outlook 2010 is super slow, freezes, don't play well with other programs and finally stops after a while.
(#4) instead of "restart" my PC stops completely down and don't come back or restart when I said to "restart".
(#5) according to ARO over 3900 registry errors, which I am sure that is why I...
(A) I have several MS security updates will not be installed, (all the directions say to change records and do all sorts of things, I don't think I'm qualified for this.
(B) PC is generally slow and lazy and even if it is a work computer, it's me from being productive, and I don't have the time. It starts slowly, and I don't know how to "truly" remove startup programs, etc.
It is a working PC, should be a whole day to re - install Windows on top the other things would have to do to make it fully functional again, drive mapping, loading the programs clients, plug-ins, etc. on top of losing this day there all the work, we would have to pay the computer scientist for that all day. Our guys 'IT' knows all the fancy words for all the 'IT' stuff he does, but he has the patience to follow through and fix things until they are really fixed, it starts simply, then vibrates on a list of things to do after his departure... and it is overpriced, even if he was as good as he thinks he's. But I have no say in this. I'm not the admin PC I don't think, but I can run & install programs on the PC. We use TrendMicro, which I'm not thrilled since I just cleaned my PC my 3rd year Trojan horse was not detected by T.M. but was detected by other things, such as MSE and MalwareBytes. Where should I start, how to get it all cleaned up, & what should I do to keep it?
Help!
Please see the answer above.
If you have any other questions, I recommend you repost our Technet forums:
http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
-
Very slow to start my computer even more slow start the Internet browser
It takes a long time to start my computer and then an error box opens upward that States:
To run this application you must first install one of the following versions of the .NET Framework. V 4.0.30319 contact your application Publisher for instructions.
It is requested more slow when I try to open my internet browser, I use Explorer all the time but I tried to use Mozilla and it helps not at all speed.
Help, please.
Dolores Ueckert
Hello
1. don't you make changes to the computer before the show?
2. what application are you trying to run?
Method 1: If the previous steps do not resolve the problem by trying to boot in safe mode and check if you get the same message pop up.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Method 2: If the problem does not occur in safe mode, and then restart the computer in clean boot to verify if a third-party program is causing the problem. To configure your computer to clean boot follow the link below.
http://support.Microsoft.com/kb/929135
Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.
You can also visit the link provided below for more information.
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
Method 3: Follow the steps in the link given below and check if that helps.
Hope it will be useful.
-
Scrolling Web page very slow on the second monitor
I have two monitors. When I move the window of firefox for the second monitor - scrolling of web pages is very slow. Sometimes he computer freeze (I can't move the mouse cursor).
I checked the other applications such as MS Word, Chrome.
This problem is only firefox problem.This problem apears when the part of the firefox window shows on the second monitor (or even 50 pixels)
Hey, I had the same problem and I solved it:
1. - in the Firefox menu, display the Tools/Options.
2. - unselect the checkbox "use hardware acceleration when available.
This should work better now. Apparently the hardware acceleration makes the problems only when the windows of Firefox appears in a non-primary screen (don't know why). I suppose you know, but if you want to change your primary monitor you can do it from settings (right click on the desktop, then properties).
Good luck! -
New Satellite Pro U400-12y is very slow
Just bought Satellite Pro U400-12y with Vista Business pre-installed (1 GB preinstalled memory).
However, the startup is very slow and actually the computer seems to work in a time warp.Any ideas? Is there a fundamental problem?
Yes, I have an idea.
I think that the high amount of background processes affect the performance of laptops.
He should know that the U400 supports many different features and these features are controlled by different applications.If you want you can start the msconfig and disable some unnecessary and unimportant process. Take a look in the Startup tab.
In addition, I recommend to disable and remove the preinstalled software called Tempro.
I did it on my system, and now it runs much faster
-
My Pc does not start at times, especially first time in the morning, an alarm tone sounds, then it tries to start, Frost pattern on the screen... or black at all. then after pressing the new button could start up of normal, it will be very slow. Help, please
Hi WolfgangKlinger,
· Did you do changes on the computer before the show?
· You're able to boot in safe mode?
· You get the error message?
Follow these methods.
Method 1: Disconnect all external devices except the keyboard and mouse.
Method 2: Start your computer in last known good configurations.
How to start your computer by using last good known Windows XP Configuration
http://support.Microsoft.com/kb/307852
Applies to:
- Microsoft Windows XP Home Edition
- Microsoft Windows XP Professional
Method 3: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 4: Follow the steps in the article.
Advanced Troubleshooting for General startup problems in Windows XP
http://support.Microsoft.com/kb/308041
For reference:
How to make a computer faster: 6 ways to speed up your PC
-
Computer is very slow and IE does not work all the time.
I bought a computer from my old employeer. He is doing all sorts of things, or should I say not to do all sorts of things. It is very slow and IE does not work all the time. They have questions arise and ask if the administrator oks things and other things like that. It came with any disks. I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it. Can someone please?
Hello
Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
the former employer to do it for you if necessary.Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
role in this issue. And even the TCP/IP stack might need to be refreshed.What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).If no joy there's something blocking perhaps.
Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK
Close and restart IE or IE with no addons
not better?
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only.
--------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------
Departure - in the search box, type-> order
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
--------------------------------
Maybe need of these:
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
my computer runs very slow, what can I do?
my computer runs very slow, what can I do?
* original title - performance and security in Internet Explorer *.
Hello
Use the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Noise comes from the computer and is very slow
I just got a new power supply because there was an amber light and installed after the computer is very slow and makes a grinding noise and the fan is ruining very hard.
My pc is a Dell XPS 410
Windows Vista SP2
Here's the part
1DJ301Kit, mouse, Universal Serial Bus, 2BTN, optical, Lead Free Black1DT240Card, graphics, 7300, weak encryption, MRMGA10, 22X8388Dual In-Line Memory Module, 512667M, 64 X 64, 8, 240, 2RX81HF730Display, flat screen, 20W2007WFP, black, Dell Americas Organization1KJ293Assembly, Panel, fill, floppy, TANK, Workstation1DY654Kit Precision drive, software, works 8.5, Office TRIAL, English1JF495Modem, V.92, Data Fax, SON2 internal, without lead, Dell Americas Organization1MY531Assembly, DVD +/-RW, 16, TSST SATA , READER Black1JX718HARD..., 250G, S2, 7.2 K, 3.5, WD-HAWK0149DFINFORMATION..., PREPARATION MATERIAL..., DEVIATION..., PRECISION WORKSTATION... INCREASE..., #21TH659PLACEMAT..., GETTING STARTED..., DIMENSION..., SYSTEM PERFORMANCE EXTREMES..., 4101YH251GUIDE..., OWNER..., DIMENSION..., PERFORMANCE EXTREMES SYSTEM..., 410, ENGLAND/ENGLISH... 1HU608Kit, software, Norton Internet Security, 2007, 15MTH, English1RH659Keyboard, 104, UNIVERSAL SERIAL bus..., UNITED STATES..., Black, DARFON ELECTRONICS, Corp.... 1JW762Kit, software, packaging, digital video disc VHP32 Drive English1UH837Kit, Speaker, 12V, AS501, Nmb Black001323INFORMATION...,..., CHASSIS NO ITEM1DH108ASSEMBLY......, DIMENSION 9200/410, PWA INTEGRATED... 1JX144Processor, 6300, 1.86, 2 M, Core Duo-conroe, Burn 21NJ131INSTRUCTION... L6 CHAS DEVIATE ON L5.51XP850Assembly, radiator, protective, MATRIX TANK DESKTOP...You probably have a hardware problem.
grinding noise refer to metal on metal contract-fans, hard drive, everything that revolves.noisy fans mean generally the CPU is running too hot (for some reason any).If you know enough about the material to troubleshoot/fix the problem, Best Buy/s Geek Squad of free basic diagnostics, they will check it out and let you only know what they think is the most likely cause. -
My computer is very slow. I used it for a year.
original title: slow computermy computer is very slow and I have only had for a year I do not download anything that is mainly for testing or research, but I would like to catch up on shows I missed, but they take forever to watch because it's so slow, how can I solve this problem?
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
When checking my jobs local (same LAN) in ARD in macOS Sierra the mouse movement is very slow, are not smooth at all and the STI jumping cursor.
This was never the case with ARD in the previous versions of OS X as El Capitan. I use the exact same settings and configuration. Control ARD clients so got very boring now under Sierra.
Any ideas or others facing the same behavior?
Thanks for your comments.
I'm really the only one having trouble with the mouse under ARD here?
I have a LAN local 1GbE very significant without bottleneck and change the color in ARD in black and white Mode has no influence at all for the risk mouse movement.
-
Computer is very slow with El Capitan
After the recent upgrade to El captain, my Macbook pro (13-inch, mid 2012) became very slow.
Starting, restarting, Safari, open programs... Wheel of Rainbow all the time.
If someone could help, I would be very much appreciated!
Thank you!
My Etrecheck results:
EtreCheck version: 3.0.3 (307)
Report generated 2016-09-20 19:59:32
Download EtreCheck from https://etrecheck.com
Time 04:09
Performance: good
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer is too slow
MacBook Pro (13-inch, mid-2012)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro9, 2
1 2.9 GHz Intel Core i7 CPU: 2 strands
8 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 667
Graphics Intel HD 4000
Color LCD 1280 x 800
OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour
TOSHIBA MK7559GSXF disk0: (750,16 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 749,30 (Go 140.30 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
MATSHITADVD-R UJ - 8À8)
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Thunderbolt_bus.
/ etc/hosts - Count: 17
Any where
/ Library/Application Support/PeerGuardian
xxx.qnation.PeerGuardian [no charge] (1.1.13 - SDK 10.8 - 2015-10-28) [Support]
/ System/Library/Extensions
com.Wacom.kext.wacomtablet [no charge] (6.3.8 Wacom tablet - 2 - SDK 10.9-2016-09-20) [Support]
[no charge] 7 tasks Apple
[loading] Apple 168 jobs
tasks of Apple 64 [performance]
[no charge] 48 Apple jobs
[loading] Apple 165 jobs
[running] Apple 77 jobs
[loaded] com.adobe.AAM.Updater - 1.0.plist (2016-09-16) [Support]
[loading] com.adobe.CS5ServiceManager.plist (2013-01-11) [Support]
[cannot] com.extensis.FMCore.plist (2016-09-06) [Support]
[loading] com.google.keystone.agent.plist (2016-07-12) [Support]
[loading] com.oracle.java.Java - Updater.plist (2014-08-13) [Support]
com.Wacom.wacomtablet.plist [running] (2014-03-31) [Support]
[loaded] com.adobe.SwitchBoard.plist (2016-09-16) [Support]
[loading] com.adobe.fpsaud.plist (2016-08-30) [Support]
[loading] com.disc - soft.DAEMONTools.PrivilegedHelper.plist (08 / 08/2013) [Support]
[loading] com.google.keystone.daemon.plist (2016-09-02) [Support]
[loading] com.macpaw.CleanMyMac3.Agent.plist (2016-09-16) [Support]
[loading] com.malwarebytes.MBAMHelperTool.plist (2015-12-28) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2014-08-13) [Support]
[loading] com.rogueamoeba.instanton - agent.plist (2014-03-25) [Support]
[loading] xxx.qnation.PeerGuardian.locum.plist (2015-10-28) [Support]
[loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-09-20)
[loading] com.spotify.webhelper.plist (2015-06-08) [Support]
Application of hidden caffeine (/ Applications/Caffeine.app)
Suitcase Fusion 6 hidden Application (/ Applications/Suitcase Fusion 6.app)
CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-28) [Support]
Default browser: 601 - SDK 10.11 (2016-09-17)
Flip4Mac WMV Plugin: 3.2.0.16 - SDK 10.8 (2013-06-07) [Support]
WacomTabletPlugin: WacomTabletPlugin 2.1.0.6 - SDK 10.9 (2014-03-31) [Support]
AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-09-16) [Support]
FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-20) [Support]
Silverlight: 5.1.20513.0 - SDK 10.6 (2016-09-16) [Support]
QuickTime Plugin: 7.7.3 (2016-09-17)
Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-20) [Support]
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
SharePointBrowserPlugin: 14.0.0 (2010-08-25) [Support]
AdobePDFViewer: 10.1.1 (2016-09-16) [Support]
JavaAppletPlugin: Java 8 updated 66 17 (2016-09-16) check the version of build
Flash Player (2016-08-30) [Support]
Flip4Mac WMV (2013-03-29) [Support]
Growl (2016-09-16) [Support]
Java (2016-09-16) [Support]
WacomTablet (2016-09-16) [Support]
Time Machine not configured!
5% WindowServer
kernel_task 2%
0% aslmanager
0% fontd
0% AddressBookSourceSync
Top of page process of memory: ⓘ
573 MB kernel_task
Com.apple.WebKit.WebContent (9) 369 MB
66 MB WindowServer
Safari of 57 MB
49MO softwareupdated
5.37 GB of free RAM
used 2.63 GB RAM (2.02 GB being cached)
Used Swap 0 B
Sep 20, 2016, 19:52:05 Self test - passed
Sep 20, 2016, /Library/Logs/DiagnosticReports/FMCore_2016-09-20-183021_[redacted].crash 18:30:21
/ Applications/Suitcase Fusion 6.app/Contents/Resources/FMCore
Sep 20, 2016, 06:24:44 PM/Library/Logs/DiagnosticReports/WacomTabletDriver_2016-09-20-182444_ [redacted]. Crash
com.wacom.WacomTabletDriver - Library/Application Support/Tablet/WacomTabletDriver.app/Contents/MacOS/WacomTabletDriver
Sep 20, 2016, /Library/Logs/DiagnosticReports/FMCore_2016-09-20-181728_[redacted].crash 18:17:28
First uninstall CleanMyMac3. It is not necessary and can ask questions.
-
The bookmark will open in firefox and see the full list, but as soon as he opens the mouse freezes and nothing works for a minute, almost as if the system is looking for something? Then when I go back function mouse scrolling of the bookmark is very slow at best? I remove firefox version 41 and re-installed without help. Anyone having this isse now? Thank you!
Start Firefox in Safe Mode {web link} by holding down the < shift >
(Mac options) key and then from Firefox. Is always the problem?Separate the issue;
Shows details of the system;Plug-ins installed
FortiClient SSLVPN CacheCleaner Firefox Plugin
FortiClient SSLVPN CacheCleanerEx Firefox Plugin
Having multiple versions of a program can cause problems.
You must remove older programs. Then download the current full installer.
Maybe you are looking for
-
HI, I have a question, I bought my new 6s of Iphone on the black market, but I can't open it, it says that I must write in icloud because it is locked before. I entered my address itunes but it doesn't work. I need help because I dreamed so that phon
-
I can't get my iPod Classic to synchronize with a new playlist. My iTunes is running version 12.4.1 I have about 146 GB memory left on my iPod Classic The testing Device Sync diagnostic tests keep saying no iPod, iPhone or iPad found"but I am still a
-
HP Envy 4500: Error Message and printer frozen, power cycling does not solve
I used my desire 4500 for several years without incident until this week where she had to do a scan and alignment on each startup and now it is frozen in case of error 0XB05C7A4E. Power cycling results in the same error and none of the buttons respon
-
Compaq v3000 precarious: Reset bios password
Hello Sir can you help me...? ??? Disable the system 07346 I try to remove cmos .no btry again.
-
streaming options went to send video to my tv, where they went or where I can find them?