very urgent! some basic questions about the discoverer

Similar Questions

• Basic questions about the port of Vsphere mirror

  I set up a lightweight VM that would deal with inter-VM traffic. To do this, I want to activate the duplication of port between virtual machines.

  
  

  I have ESXi 5.5 Update 1 installed, use the Vsphere (no webclient) client. I see no duplication of port capacity on my Vsphere Client

  

  I have some very basic questions:

  (1) all documentation I've read involving 'Port mirror' is done via web Vsphere client. Vsphere is provided with Vcenter (please, correct me if I'm wrong)

  (2) only functions with "Distributed Virtual Switch", not "switch vSphere Standard" port mirroring. How can I activate "Distributed Virtual Switch"? What products can I download/install and try (suppose I go to the user a license for 60 days)

  (3) exist what API to enable/disable/setup Port mirroring?

  (1) all documentation I've read involving 'Port mirror' is done via web Vsphere client. Vsphere is provided with Vcenter (please, correct me if I'm wrong)

  Because the mirror of port requires a distributed switch, you will need to vCenter Server and once in vCenter Server, you can the vSphere Web Client of the user or the vSphere Client (c# version).

  (2) only functions with "Distributed Virtual Switch", not "switch vSphere Standard" port mirroring. How can I activate "Distributed Virtual Switch"? What products can I download/install and try (suppose I go to the user a license for 60 days)

  You can download the server vCenter Server (60 day trial) and you'll have an Enterprise Plus version for your ESXi host vSphere.

  (3) exist what API to enable/disable/setup Port mirroring?

  Check the comments of this blog: http://blogs.vmware.com/vsphere/2013/01/vsphere-5-1-vds-feature-enhancements-port-mirroring-part-1.html

• Some General Questions about the externalization of authentication

  We plane to outsource the APEX authentication so that it would be linked to the credentials of the end-user network. Were do because:
  
  It is more in line with the expectations of the users.
  It will simplify maintenance by the user.
  When the user leaves the ice, their APEX access will be automatically disbanded as their network connections are disabled.
  
  We found some very good articles on the subject, for example http://www.greenit.li/greenIT/Willkommen_files/Oracle_APEX_ProofOfConceptNTLMPLSQL.pdf (other suggestions would be welcomed and encouraged). However; We have a few questions:
  
  The first is authentication and authorization. We get how end users can be authenticated based on Active Directory. However, within the APEX now, create us a new user and specify if who are developers, who, team development Application Builder, SQL workshop, they can access. schemas are accessible to them, etc. This page requires, of course, a password.
  
  How will this work if the authentication is outsourced? We always create the same user in the APEX?
  If so, what should we put the password related areas?
  If this is not the case, how do we control authorization once authentication completed successfully?
  If not, how to make the application available for users (authenticated network) and not others?
  If the application allows the user to pass a password (assuming that they are properly connected to the network), what should happen when a person clicks on logout?
  
  Thank you for any input,
  
  -Joe

  Joe Upshaw wrote:

  One of the elements of game here (great requirements above) is to make sure that the APEX applications are directly linked in the cycle of creation/decommissioning of the user of the organization. In other words, the desire is that deleting or disabling a user account in the central directory (Active Directory) have the effect of disabling access to all enterprise systems. We do not expect to allow some "heavy" end users the ability to access the SQL browser. Is there something that can be done, perhaps with the authorisation schemes, which would allow their access is automatically revoked if it network id have been revoked? Can authorisation schemes be applied to the APEX development pages maybe?

  Laughing out loud

  The only thing that comes to mind is running a scheduled task on your databases which retrieves users APEX in the APEX_WORKSPACE_APEX_USERS view, checks the user account is still valid in AD using dbms_ldap (assuming that the user IDS match, or there is a convention to get from one to the other) and removes , expires or to block those who are not using the APEX API. The problem which is the

  To perform this procedure, the current user must have administrator privileges in the workspace.

  restriction to the user of apex_util API. Comply with the scheduled job will have to Re: create a session programmatically (that is to say, outside the APEX)., who is skating on or above the line about the API without papers/not taken in charge. This may be frowned upon by the great above and Oracle. (However, in this case it is less of a concern that the use of such methods in your APEX applications, which certainly, I would not recommend.)

• Basic questions about the PL/SQL web services and data source names

  Hello
  
  I've successfully generated a web service for a procedure from PL/SQL packaged JDeveloper 11.1.1.3.0).
  
  The following code was generated in the base class for web services:
  

   __dataSource = (javax.sql.DataSource) __initCtx.lookup("java:comp/env/jdbc/dbconnectionDS");

  However in the weblogic server, the data source name is jdbc/Gisele for deployment fails in a first time.
  
  What is the recommended procedure to solve this problem? The obvious solution is to manually change the source - that's what I did and it worked fine. However if I re - generate the web service I won't lose my change. Is there a better way to do it?
  
  Another question - in the web.xml file that is generated, there is a resource-ref to the data source. I was hoping that change the data source name it would help, but it didn't work. What is - it used to in this context?
  
  Thank you
  Luis

  I forgot to add, so in case some time later and you want to update the connection to your service details, all you have to do is to add the following entry in your weblogic.xml:
  .
  
  JDBC/ref_name_from_web. XML
  JDBC/new_jndi_name
  
  .
  And in this way, you will not have to change any code level to point your web service to another connection.

  Vishal-

• A very basic question about the shared storage

  To implement GR 11, 2 in Sun SPARC 5.10, our sys admins have allocated block devices in the shared storage and they sent us a letter mentioning the disks. This is what looks like their mail
  
  Storage attached with the Node1
  

  /dev/rdsk/c4ikdzs3
  /dev/rdsk/c4ikdzs4
  .
  .

  Storage attached to Node2
  

  /dev/rdsk/c5ikdzj2
  /dev/rdsk/c5ikdzj5
  .
  .

  When I connect with the Node1: / dev/rdsk, I see

  /dev/rdsk/c4ikdzs3
  /dev/rdsk/c4ikdzs4
  .
  .

  as they have said. Same for Node2
  
  
  But all raw devices mentioned above should be visible at/dev/rdsk of nodes. Right? Isn't that whole point of CARS; Shared storage ?

  resistanceIsFruitful wrote:

  But all raw devices mentioned above should be visible at/dev/rdsk of nodes. Right? Isn't that whole point of CARS; Shared storage ?

  Not exactly, if you are referring to the names of devices...

  Each core will make a discovery to support when starting. When dealing with the LUN through one HBA (or similar), there is absolutely no guarantee that the nuclei will detect the LUNS in the same order and assign the same scsi device names to them. A LUN can be called device-foo-1 on a single server and device-foo-21 on another.

  In addition, several HBAs will be dual port and dual fiber running channels. So, not only is the same logic unit seen as a scsi device, different number of each core but you can see more than once. Device-foo-1 and device-foo-33 may be the same physical LUN on server 1.

  To solve this logical device name is required. This will be the name of the same device on all servers - and that it will support multiple paths of I/O to the LUN in turn seamlessly. This is done by looking at the unique signature of the SCSI - called WWID or World Wide nameof the software "special driver. With this unique signature, s/w only recognizes a specific LUN, regardless of what server s/w runs on.

  This s/w is called Multipath on Linux, EMC Powerpath and so on. I expect that you will have something similar on your servers.

  Scsi device that is mapped by the kernel to the unit number logic is not used. In the case of multipath , for example, use the + / dev/mpath/mpath+ devices. In the case of Powerpath, these will be + / dev/emcpower+ devices.

  What are the names of device you will use to 11g Grid Infrastructure and Oracle ASM and RAC installation and configuration of shared storage.

• Very basic question about the images in tables

  So I made 4 buttons, 90 pixels wide by 20 pixels high each in photoshop. Then, I made a table 360 pixels wide by 20 pixels high in DW to make a small nav bar. Then I placed the 4 buttons in the table. Why is - it is showing only 366 pixels wide and when I saw the navigation bar on a browser that the 4th button down to the second line. There is no padding or margin adjustment so I wonder why it isn't an exact?
  

  27/09/06 20:47, "614mike" wrote:

  > So I made 4 buttons, 90 pixels wide by 20 pixels high each in photoshop. Then
  > I
  > done a width of 20 pixels high in DW to make a small nav bar table 360 pixels.
  > Then I placed the 4 buttons in the table. Why is this it is showing only 366 pixels wide
  > and when I saw the 4th button browser navigation bar falls down to the
  > second line. There is no padding or margin so I wonder why it is not a
  > exact fit?
  >
  >
  In fact said 0 padding and margin 0, or are you assuming that
  There is no padding or margin because you do not specify any?

  Most browsers use a padding by default and margin applied when you
  don't specify anything whatsoever, and it varies from a browser. Try
  specifying 0 padding and margin 0, if you do not already have.

  --
  Ghizlaine

• Basic question about the selection of the AP and multiple channels

  I have about 10 PA (Aironet 1240 G) intended to be deployed one of my floors of office. We examined a diagram of the floor and made sure that we ordered enough to completely saturate the ground with wireless coverage. There are a few AP which are probably only 50' with each other. It's actually a bit exaggerated.

  I put a base on the switch configuration so that there are two different SSID on the access point (one for a production of WLAN and the other for a WLAN comments). Each SSID is associated with a VLAN different.

  I want to know is this what to do on the channels for the AP? Each access point will be independently configured and controlled.

  I understand that there is a way to control which channels each AP uses, but I'm not familiar with the controls or best practices for the configuration of the AP

  Can I do something like make sure that each access point uses a different channel than its nearest adjacent neighbors? Someone would mind sharing what is the command to do it, and where it is applied?

  I have read through some archives and saw people talk to set "no bunk channels" and to configure them to use 1,6,11 channels. I guess I don't understand what is meant by there.

  Manually define you an access point to channel 1, then set his neighbour to use 6 and another neighbor to use 11, and then you who stay?

  What is the worst of the scenarios on what happens when you have no AP too close to the other located on the same channel?

  It is a pleasure to read through the documentation if someone wouldn't mind pointing me to it. I'm still trying to understand the concept, and then I should be able to understand the documentation that came with the AP.

  Thank you for your help.

  If your stand-alone Access Points. If it was a deployment of Comptrollership, in fact to dynamically manage the channels for you.

  But what you really want to do, is you see APs do something like this:

  (imagine each number represents an access point, and it channel)

  1 6 11 1

  6 11 1 6

  11 1 6 11

  1 6 11 1

  It is a conceerne configuration guide. I think he has a small section on the channel assignment. If you do this manually, I think that you specify the actual frequency used in the CLI instead of the channel number.

  http://www.Cisco.com/en/us/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43rf.html

  So the CLI under the Dot11Radio0 you would do something like 'channel 2412' for channel 1... 2437 for 6, 2462

  for 11...

  If you have APs side by side on the same channel, you are likely to have clients interfere between them.

• Some additional questions about the creation of recovery disks

  HP Clubhouse 17 laptop laptop 17-e040us

  Wireless connection

  Disks creating information that I downloaded from the HP website, he States "If you are prompted for an administrator password, type the password confirmation or providide.

  How to create an administrator password?  The only areas where I created passwords on the laptop are the Login Screen/signature to the PC, Mirosoft account and a Description of the computers.   How can I give confirmation?

  Disconnected from the internet.  After the login screen and go to the start menu, I'm not connected to the internet.  Fix?

  Do I have to disconnect external equipment of the laptop before you create recovery discs?

  During the process of creating, if it has stop or, a message that something is wrong, what should I do?

  Thank you.

  You're not likely to be asked for Admin password unless you use a user account created with Limited permissions such as we would be put in place for another user on their machine. Some people share a machine with children, adolescents and setup one account limited for them.

  I never really worried about to disconnect Internet-just don't have Internet Explorer or Email app open and active on the internet. You could always disable the wireless I guess. Usually the F12 key in the top row turns stylized / disable tapping. White = light it.

  If you have a problem... just after this problem if the Recovery Manager gives no details of what you need to do about it. You can always phone HP and request a recovery media if the process fails for you.

  Just try to stop worrying and thinking that it. Go ahead!

• Basic questions about the storage on ESXi

  Hello

  We are about to implement a VMware ESXi environment and I would like to get some clarification on the storage in ESXi before proceeding.

  Material: 3 guests and HP EVA4000 FC 4 TB SAN.

  We execute the file, mail, web, directory, application and database servers.

  Some of these services require quick I/O and some require data to be 'seen' by at least 2 virtual servers for HA.

  Can I use discs RDM for HA/Clustering servers and for those who need quick I/O, or can I use VMDK:s?

  If I present to you the entire 4 TB SAN ESXi can I then several virtual servers use certain parts of this 4 TB SAN as discs RDM and other servers use certain parts of this SAN as VMDK:s? (Do we have virtual HBA:s in ESXi?)

  Thank you

  Yes. But you must consider as usual VMDK of hard drives in this case, you must install the cluster file system there.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Basic questions about the Permanent Collections

  I'm learning just on Collections, discover that a Collection preserves all the work I did in the collection. So, I guess that the images of a collection are virtual copies which can be adjusted in the develop Module, with the difference that they appear in the catalogue under the imported original files. I suppose also that a changed image can be locked to prevent other changes, say if another virtual copy should be made.

  I understand that Collections should be protected somehow, for example if I have a collection with images adjusted to look good on the web, and another collection of the same images adjusted to the for look good, using a certain printer.

  Maybe I'll ever need adjust the images for different applications, except outside of Lightroom for applications in the CMYK offset printing. As different settings for the slideshow, Web and print can all be contained in a collection, it would probably be best to use the same images, without changing the images for each output.

  Some of you who have more experience can add thoughts here about how best to use the Collections. My goal is to keep things simple.

  TIA,

  Ken

  Ken-

  Put an image in a Collection made not a virtual copy. Either you have to have VC to reside in a Collection. These distinctions may be among the most important! Can I suggest that run you a few tests with VC in and out of the Collections?

  Best wishes

• basic questions about the Bigdata, NOSQL, and Hadoop

  
  Hello

  I have fundamental questions related to Bigdata. (I have Googled it but still want to confirm with experts)

  Please correct me if I'm wrong on below.

  (1) as far as I know data large are the collection of unstructured data. We can even store relational data as well.

  (2) NOSQL is a product of Oracle to manage bigdata (UN structured data and relational data as well)

  (3) Hadoop is the only framework that is available on the market to manage the bigdata.

  What are the other systems of database that we have in the market to manage the bigdata.

  See you soon,.

  Suri

  Suri,

  NoSQL is a distributed (with indexing and schematics) database. From a database point of view, NoSQL is a good place to start you off. Hadoop is a framework for distributed processing, rather than a database. If you are looking to take advantage of your database skills, then I suggest starting with NoSQL.

  Oracle Press has recently published "Oracle Big Data Handbook," which is an overview of the suite of large data Oracle technology products. I would start there. You can find the book on Oracle Press or Amazon , Barnes & Noble.

  I hope this helps.

  Kind regards

  Dave

• Basic questions about the installation of ASM

  I can't find definitive answers to the following. Let me try here. I want to build a server Linux, RDBMS 11.2.0.3, running with the ASM. It's just the prototype server, in our conversion of Oracle 11 g on AIX without ASM on Oracle 11 g on Linux with the ASM.
  
  I have an Oracle VM already running cluster and built a number of virtual machines in models, and everything works fine. Now I am installing DSO, have failed repeatedly. Maybe I'm doing something fundamentally wrong. Here are two questions:
  
  1. is it true that the only (reasonable) to install DSO is to install the product called "grid Infrastructure? As far as I know, the answer is 'yes '. But GI seems to be so much more than ASM, although I don't think I want or need. Is there an easier way to get ASM?
  
  2. the matrix certification swear that grid 11.2.0.3 Infrastructure is certified on Oracle Linux 6. (1) I can still see a lot of posts on OTN and elsewhere on the net that say it is NOT supported and that there are has mant problems in get the installation works, and (2) I have tried to install it on OEL 6 and can't get the installer to finish. Specifically, the root.sh script fails with "ohasd failed to start... '. ». Before further my installation problems, I want to just make sure: If this installation of OEL 6?

  Terry Phelps wrote:
  I can't find definitive answers to the following. Let me try here. I want to build a server Linux, RDBMS 11.2.0.3, running with the ASM. It's just the prototype server, in our conversion of Oracle 11 g on AIX without ASM on Oracle 11 g on Linux with the ASM.

  I have an Oracle VM already running cluster and built a number of virtual machines in models, and everything works fine. Now I am installing DSO, have failed repeatedly. Maybe I'm doing something fundamentally wrong. Here are two questions:

  1. is it true that the only (reasonable) to install DSO is to install the product called "grid Infrastructure? As far as I know, the answer is 'yes '. But GI seems to be so much more than ASM, although I don't think I want or need. Is there an easier way to get ASM?

  ASM is a feature of the Oracle Grid infrastructure Installation. So you will need to install IM using ASM.

  There is a GI installation which can be installed and configured in two different directions. For a Cluster or for a standalone.

  This option must be selected during installation.

  The installation of GI for a standalone is called Oracle Restart.

  GI for a Cluster installation is called Oracle Clusterware.

  The two options above have the particularity of the DSO.

  2. the matrix certification swear that grid 11.2.0.3 Infrastructure is certified on Oracle Linux 6. (1) I can still see a lot of posts on OTN and elsewhere on the net that say it is NOT supported and that there are has mant problems in get the installation works, and (2) I have tried to install it on OEL 6 and can't get the installer to finish. Specifically, the root.sh script fails with "ohasd failed to start... '. ». Before further my installation problems, I want to just make sure: If this installation of OEL 6?

  A lot of users here OTN tried installing Grid Infrastructure on RHEL6/OEL6 when it is not certified. Many questions appear.

  When it has been certified by Oracle, it remains several notes on MOS that will help you follow the main steps for a successful installation.

  I think you should use OEL 6, since Oracle Linux 6 has been certified by Oracle Corporation, you have all the support on this product.

  Start with this note: * master Note Linux OS requirements for database server [851598.1 ID] *.

  * Customer database or the server installation of database on Red Hat Enterprise Linux 6 (RHEL6) or Oracle Linux 6 [ID 1350000.1] *.

  http://levipereira.WordPress.com/2012/04/18/certification-of-the-Oracle-database-on-Oracle-Linux-6-and-Red-Hat-Enterprise-Linux-6/

• basic questions about the URL interactions.

  I'm a beginner one week in Flash catalyst and done great. I have a few questions so.

  (1) how is - a edit interaction on a button? for example I added an interaction of the URL, but want to change. Seems that have the options of adding additional interactions, or remove the button and adding a new library.

  (2) after publication, if I click on a button to access a URL, I would return to the flash site after the closure of the URL. Unfortunately, when I enter the URL, my flash site is closed.

  Any help would be appreciated!

  Andy

  You can change an existing interaction by double-clicking on it in the Interaction Panel.

  When you create or modify the interaction, you can set the URL to open in the same browser window or in a new window. If you select the option for it to open in a new window, your application will always be there when the user closes the window in which the link open.

• Basic question on the configuration of the OVD

  Hi gurus
  I have a basic question about the configuration of the TPM. I have all the "employees" in Active Directory and 'Employees + external users' in OID. The employee user password is maintained in AD, while the same for the external user is maintained in OID.
  
  Query:
  I need to configure authentication for an application for the employees present in the AD and present external users in OID. I have to join the profiles of employees present in AD and OID. Even if the employees are present in the OID, I don't want to configure for authentication of the OAM.
  
  How can I implement this using OAM and OVD.

  I got your condition.

  You said that OID contains external users as well as employees. You manage a container separated for employees in OID. If so, you job would be easy. If there is no container separated for employees on the OID and storing all users (employees and external users) in the same container (default: cn = Users, dc = xxx, dc is com) then you can get the list of AD users only with the following ldapsearch command:

  ldapsearch h Pei d 'cn = sleep '' w sub s b '' 'objectclass = user' SamAccountName

  Create three adapters OVD:

  1 adapter used (this should point to Active Directory)

  2. users adapter (when creating this, you have to exclude users AD, just similar to find the above option).

  3 create the adapter to store as the clubs above two adapters.

  Now, OAM should talk to store adapter.

  I hope this helps.

  Thank you
  GK

  Published by: GK Goalla on October 3, 2012 12:34

• Questions about the use of Adobe Muse (was: Basic - Help please)

  I am a volunteer to build my first website, to help veterans.

  As I am new, I have some basic questions:

  1. How can I copy in the navigation buttons wrap the text so that they can be shorter?

  2. How can I create 'in the navigation of the page"where I have a pages long document and a box on the side - with topics in the document - so that a viewer can click on the button in the box and jump on this part of the document?

  3. I am confused about what I see on the screen and that a real Viewer will see.

  a. my frame is defined on a width of 960 - I have no idea why.  I have 9 videos put on my home page, so that I can l take final decisions later, as for those who remain and who will move to other pages.

  b. to obtain 9 on the page, I have all made 320 X 240.  However, to place on page 3 in all, those outside executed partially beyond the marker 960 width pink and purple.

  c. when I view the page in 'Preview' or 'view in a browser', all the pictures show in their entirety with many areas left on the outside surfaces of the pages.

  Please explain that a veterinarian would actually see and what misunderstanding I.  Please consider in your response that most of the points of view may be on tablets or smart phones.

  Thank you very much

  Neil

  To answer these questions will be massively exceed the limits of a forum for users.

  Are just beginning to explore and learn from Muse: Learn Adobe Muse, get help and support. Adobe Muse CC