VI analyzer config file is corrupt

Similar Questions

• How to read the VI Analyzer config file?

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  Kaspar says:

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  If you have VI Analyzer installed, you can load the configuration file and look at the section select the Tests. There is a test for the maximum size of front under front-> User Interface. The default value is the resolution of the current monitor of the PC (including multiple monitors). You can change to the desired option.

• "The missing config file corrupt" error message appears

  When I start my laptop, I get the "Missing config file corrupt" message and I can't start windows, it falls needs the original installation cd-rom!

  It seems that I do not have this cd? That I should?

  I don't want to just do a restore from the hard drive that I'll lose everything.

  Any ideas?

  Please, I beg you!

  Hello

  Have you tried booting in safe mode?
  If it is possible, then you can try to use the System Restore tool under Programs Accessories System Tools, you should find.

  Try to roll back the OS to the beginning. Well, if this procedure doesn't help then as said jmatthews you save files on the other computer and reinstall the operating system.

• Satellite M115-S30394 - config.sys file is corrupt

  I bought a Satellite M115 S 30394 is about 2 years.
  The first year he had 9 hard drives and Toshiba said they replaced the motherboard 2 times.

  It still does not work and the senario is first a message that the config.sys file is corrupt and after correcting it will work for a few days, then a message appears that the hard drive is about to fail and he does it in 2 days.

  I replaced because he couldn't be trusted in my company but I was wondering if someone has any ideas so that I can have as a spare.

  Thank you

  Hello

  If you get the message that the HARD disk fails, then it s advisable to replace it.
  But it s really strange question

  In any case, I never had this problem on one of my notebooks, but I think you should test the notebook with a new HARD drive.

  Good luck

• After 13 updated both the system rebooted and now as he begins to install XP it autorestarts. It will not recover to the last known good config and delivers a message of corrupted config file.

  Any ideas?

  Thank you

  Frank

  You will share exactly what the message of the corrupt config file says?  My crystal ball takes off the second Wednesday of each month.
  If your system reboots continuously, the next time the system reboots, start tapping the F8 key until you see the menu Boot Options Advanced XP.  On the Advanced Boot Options menu, select:

  Disable the automatic restart in the event of system failure

  This will display the error message that you don't see when the system restarts.  This is what Windows is supposed to do when there a failure - it is supposed to automatically restart.  The error you see on the screen has your clues...

  If you do not see the menu Options start Advancded or you do not have to turn it off automatic restart on option system in the list of choices, you need to try again until you do.  Start typing the F8 key earlier and more frequently as your system begins to come alive.  If you miss the window of opportunity F8, you must try again.
  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)
  ?
  Most of the time (in recent memory) when there is a problem after installing Microsoft updates, the problem is because the computer was somehow afflicted before/when updates have been installed and updates simply bring to the surface a problem that was not evident before.
  If the last thing people remember is to install the updates from MS, it's am understandable reaction in some way involve updates for updating the post problems when things don't work properly afterwards and especially during the next reboot.
  Another reaction is to try to remember all of the updates you have installed and somehow uninstall the updates one of the XP Recovery Console until you find one who is 'responsible '.  Unless you noted all issues of update, it would be more difficult, but not impossible.  It is unlikely that practical or useful advice in most situations, but you can of course try it.
  Security updates sometimes holes patch XP and when security holes are patched (and XP is "tighter"), affliction can no longer do what is done, things to happen are no longer allowed to happen as a result of the strengthening of security, the system has now a new problem (especially when it initializes more) , and it seems that install updates broken system while in fact, it's just a coincidence.
  Another thing that can happen is that the Microsoft updates will change or update certain critical files on the XP system.  Depending on what your software antivirus or antimalware software is, these programs can interpret the new or updated files to day as being a threat or somehow infected and quarantine (effectively delete) files it thinks are wary.
  The next time you restart your system, you'll have some sort of a problem, or you do not start if the files are missing.  Once more, the problem is not with the updates, it's another condition on your system with your antivirus or antimalware programs you beautiful little (they could be aware of what like the new look of Microsoft files).
  You may have seen some or heard talk about some of these kinds of people, but not too intellectually stimulating general or scenarios of error after update:
  NTLDR is missing or corrupt, ntdetect.com is missing or damaged, ntoskrnl.exe is missing or damaged, hal.dll is missing or corrupt, etc.
  These types of errors are usually very easy to fix, but if you don't know what's happening, the temptation is to do a repair installation, or if none of these kinds of things are really necessary, completely reinstall your XP.  I have never done a system restore, a repair install or reinstalled XP in my life to solve any problem (but I did the process for practice).  These things are simply not options with me.
  Given that Microsoft sends many updates on the second Tuesday of each month (they call it "Patch Tuesday"), this means that the or to the second Wednesday of each month there is an increase of 'problems' in the field - in particular the types of problems "my computer does not start after you install the updates from Microsoft.  That day is also known as "exploit Wednesday".
  You can read about it here: http://en.wikipedia.org/wiki/Patch_Tuesday
  It is likely that if you have a problem like this or after the installation of MS updates, someone else has also had the same problem and understood what to do about it.  A problem here, is that no one knows what is your problem.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Satellite A100-207 - \windows\system32\config\system is corrupt

  Hello

  Can someone help me with the following problem. With regard to a Toshiba Satellite A100-207 with windows XP media edition

  When starting the laptop hangs with error * \windows\system32\config\system is corrupt *.

  This article is the closest to the problem http://support.microsoft.com/kb/307545. but the warning in the article on the point is not to use with circumspect OEM on more facilities of he made me.

  I have lost the disc of recovery (recently).
  But were able to boot the laptop from USB using a cutter (lite) version of windows.

  The scene in the article copy c:\windows\repair\system c:\windows\system32\config\system fails because the file does not exist (the other files do however).

  In this folder there is a system.bak, this would solve the problems like the laptop boots windows logo screen then after 5 minutes restarts and just go around and around a certain extent.

  There is also a file system.sav in the folder windows\system32\config using this all goes someway to to solve the problem, the laptop restarts and resumes product set-up with off course fails has so I don't have the recovery disk.

  I would be grateful if someone could help with the problem

  Regards Garry

  > but the warning in the article on the point is not to use with circumspect OEM on more facilities of he made me.

  You can ignore this warning, you have no other choice than to try to fix this system following the article in the Microsoft Knowledge base.

  But to be honest, I doubt that the system would run smoothly after this work around.

  I would recommend the new installation of the OS.
  If you don t have a Toshiba Recovery disk, you can use a Microsoft Disk to reinstall the system. Essential drivers are available Toshiba driver Web site.

• Config file error

  Hello

  I could play Bejeweld 2 on my laptop. This game is in the 'Games' folder in 'programs' under the Start button. But from today I'm not capable of playing Bejeweld 2 or any other game that is located in the folder "Game". All I get is an error message saying the following: Config File error cannot open file (line 0, column 0).

  I use Internet Explorer 8.0.7600.16385

  The only game that works is called Solitaire.

  I would like to help resolve this. I tried the Microsoft Fix It, but that is only an error and could not continue the analysis of the computer.

  Best regards

  Kelly Heijn

  Hi Kelly Heijn,.

  1. Only tried Microsoft fixit?
  2. When was the last time it was working fine?
  3. Did you the latest changes on the computer?

  Check if you can run games in SafeMode.

  Note: Screen would be inappropriate in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  If the above step failsthen, I would say that SFC scan running on the computer that would be a search for files corrupt on the computer system and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows\System32\Config\System is corrupted or missing

  I restarted Windows XP Home edition using the software/operating system installation CD.
  I deleted everything and started again and when the Setup is finished, she has restarted.
  Then the message "windows\system32\config\system is corrupted or missing" came and said it should be repaired in the recovery console.

  Boot from the Windows XP CD and go to Recovery Console - follow this document to do http://support.microsoft.com/kb/307654

  Go to the command prompt.

  Then change to the C: by typing C: and press ENTER.

  Then type CD\SYSTEM VOLUME INFORMATION and press enter

  Then type DIR /AH and press enter (this will show you a directories even if they are hidden directories)

  This will show a few directories... one in particular starts with the name of directory being _RESTORE {there is a long series of random letters and it ends by}

  Type CD _restore {then the random set of letters, dashes and numbers in the directory list of the above command and ending by the}, and then press ENTER.

  Then type dir and press to enter.

  It will show you a bunch of directories that begin with RP - something like RP1366.

  Look at the last entry in directory PR.  If IE RP1366... then look for a couple of directory entries...

  Type CD RP1364 to some directory of restore point that is relevant to your directory entry.  Just don't do the last restore point directory - I would go back 2 or 3 directories restore point.

  Then type DIR /AD and press enter

  Should display a directory called SNAPSHOT

  Then type CD SNAPSHOT

  Then type DIR and press enter

  You should see a few files but two in particular.

  _REGISTRY_MACHINE_SYSTEM
  _REGISTRY_MACHINE_SOFTWARE

  Type COPY _REGISTRY_MACHINE_SYSTEM C:\windows\system32\config\system and press enter
  Then type COPY _REGISTRY_MACHINE_SOFTWARE c:\windows\system32\config\software and press enter

  Then restart your PC and see if you can connect.

• How to remove all occurrences of Yahoo from my "subject: config ' file?"

  Thanks in advance for any help you can offer.

  Somehow, I hijacked by Yahoo yesterday and ends as my default search provider. And, after that, the small magnifying glass where search engines are listed have disappeared. Firefox doesn't have to feel very safe!

  I restored the search "magnifying glass" through "Customize", but I don't want any more 'surprises' Yahoo

  The next four lines are copied from my "subject: config ' file." Are they necessary?

  browser.search.order.US.1;data:text/plain,browser.search.order.US.1=Yahoo
  Browser.Search.Order.2; Yahoo
  browser.contentHandlers.types.0.uri; https://Add.my.Yahoo.com/RSS?URL=%s
  browser.contentHandlers.types.0.title; My Yahoo!

  In addition, these two:

  gecko.handlerService.schemes.mailto.0.uriTemplate; https://compose.mail.Yahoo.com/?to=%s
  gecko.handlerService.schemes.mailto.0.name; Yahoo! Mail

  browser.search.order.US.1;data:text/plain,browser.search.order.US.1=Yahoo > default search engine. This line is necessary, but you can define a different value to replace Yahoo, Google or Bing for example

  Browser.Search.Order.2; Yahoo > if you use the American version of Firefox, this line is not used

  browser.contentHandlers.types.0.title; My Yahoo! > corresponding to the 1st app/site used when you subscribe to a feed

  gecko.handlerService.schemes.mailto.0.uriTemplate; https://compose.mail.Yahoo.com/?to=%s and gecko.handlerService.schemes.mailto.0.name; Yahoo! Mail > these lines define the 1st element in the list that appears when you open a link mailto: Protocol (i.e. an email address)

  To conclude, except the 1st line, Yahoo does not work on your computer, unless you specifically choose to use when a context menu is displayed.

• Why no Support information about the browser.display.focus_ring_style entry in the config file? Why I can't change the color of the ring update via the config file?

  Currently, using Ver38.
  Used to change the color of focus ring & screws of css styling to help see what link has focus.
  Methods via ' subject: config' to change any focus ring settings are too restrictive.
  Impossible to find info on the entrance of config file of ' browser.display.focus_ring_style.

  This code must be inside the userContent.css file.

• MP3 link does not open a Web site using Ubuntu 14.04, window saying the file is corrupted, but it works other NVO computers very well and worked on this computer using

  Ubuntu 12.04 and upgraded to Ubuntu 14.04 and now trying to open an MP3 audio on a Web site that used to work, now I get an error message indicating that the file is corrupted. Using the Firefox browser which is updated. What now? The file opens correctly in Documents with VLC Player.

  Don't worry about this. You are today, ask questions.
  Someday, you'll be the one who gives the answers.

  Once you are sure that the problem has disappeared, please report
  your last post as solved problem.

  Good luck.

• When I download firefox 10 it says that the file is corrupted

  The load down to firefox 10 returns file is corrupted. Any suggestions?

  You can update Firefox 8.0.1 - use the help > about Firefox to trigger a check for updates and the installation of the update.

• I get a message telling me that the file is corrupted please notify

  Am I allowed to download filefox but when it gives you the option to run I get an error message telling me that this file is corrupted.

  It is possible that your antivirus software is corrupt downloaded files or otherwise interfere with the download of files by Firefox.

  Try disabling analysis in real time (live) files in your software anti-virus temporarily to see if that makes working download.

  See "Antivirus disable in Firefox preferences - Windows."

  • http://KB.mozillazine.org/Unable_to_save_or_download_files

• Satellite X 200: Toshiba Vista value-added download Pack - files are corrupted

  I downloaded the valuespack severaltimes for my Satellite x 200.
  By extracting, I get a corrupted message that the files are corrupt.

  What is the problem with the file?

  THX

  I can't believe this. The same version is available for several models of different laptops, and of course, you're the only one with this problem. I recommend you use a download manager. Try again.

• Satellite M300 - driver downloaded, the files are corrupted

  Hi all

  I have a Satellite M300 when working there, I bought in Asia.

  HARD drive died and had to be replaced with the nightmare of normal to find drivers, the main problem being the only site that recognizes the model number - PSMD4L Toshiba Asia. Unfortunately the dosent work section download drivers, I tried from different places, different computers etc. but all of the download files are corrupted and there is noway contact Toshiba Asia!

  Frankly I'm amazed that a company like Toshiba doesn't have a handle on all the models produced around the world + support for drivers simply incredible!

  How can anyway sorry yell someone has any suggestions, I get the drivers?

  Cheers for any help

  Rich

  Why do you think that the drivers are corrupt?
  Did you receive any error messages? If Yes, which?

  What drivers did you tried to install?
  What operating system do you use?