Failed to load the exe programs or internet explorer, none of my programs work
Vista does not load the exe files and a window opens to select the program to start with, then internet explore will not work and is to expire.
Please run Doug Knox fix .exe (which is not a file .exe so you can run it) and then carefully swipe to the malware.
http://www.dougknox.com/XP/file_assoc.htm
http://www.elephantboycomputers.com/page2.html#Removing_Malware
MS - MVP - Elephant Boy computers - don't panic!
Tags: Windows
Similar Questions
-
Half-life 2 says failed to load the Launcher DLL specified module could not be found
Failed to load the Launcher DLL:
the specified module could not be foundHi Madoo17,
Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.
1. Once you get this error message?
2. it worked before?
3 did you changes to the computer before the show?
Perform the steps:
Method 1:
Put the computer in a State of boot is a way to know which application is causing this problem.
To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Step 1:
Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
Follow the steps in the link below to do the same thing:
How to configure Windows XP to start in a "clean boot" State
Note: After troubleshooting, be sure to set the computer to start as usual as shown here:
Step 2: To configure Windows to use a Normal startup state
After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
a. Click Start and then click Run.
b. type msconfig and click OK. The System Configuration Utility dialog box appears.
c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
d. When you are prompted, click on restart to restart the computer.
Method 2: Use the (SFC) System File Checker tool.
SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker.
Check out this link to do the same thing:
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
Hope this information helps. Please reply back with the State so that we can help you.
-
Failed to initialize the installation program. Error 110. On Windows XP.
Whenever I try to install LV6.1 or LV6.1 DSC Run-Time system, on my Windows XP machine, I always get the following error message:
Failed to initialize the installation program. Error 110.
I think it has something to do with the MSI or "Windows Installer". I tried to uninstall all of THE products of National Instruments, but it did not help. Any ideas?
Hello. Thank you. I tried, but in fact, it did not help. However, after doing a little research on our, I found a solution by following these steps:
1. reboot Windows XP in Safe Mode
2. double-click on the Setup program to start the installation process
3 cancel the installation process after it starts
4. restart windows in normal modeNow, all my applications of MSI with setup.exe work correctly! Quite strange. Just for the record: this problem was not due to a Virus protection program (as all assumed first that many people) and it kept me from running applications (MSI?) of ANY installer from a CD.
-
Original title: 0cx000034.
Windows xp pro. all KB (130 or almost). I've stalled zonealarm 9-3-037-000 and is unable to contact the update server. I have this problem at the start of this application fails to load (forcefield.exe) error 0xc000034, press (x) to continue. Za tech has the slightest idea why. Technical support told me to do evervthing, I does not. They never say why I get error at startup. W the dose the average of the error and how to fix
Hi Ray,
It seems that ZoneAlarm has not installed correctly.
I recommend you to uninstall ZoneAlarm completely using the removal tool and check if the problem persists.
Subsequently, you can re - install software ZoneAlarm .
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
All the ' * .exe ' programs will not start by simply clicking on the shortcut icon. I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". "" It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?
Hello
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp?prevx=Y <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
======================================
If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
MALWARE IS STILL PRESENT).You can try a repair install or an upgrade in Place.
You can use another DVD that aren't copy protected but you you need to own
Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
good backup or 3 (security in redundancy).On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmThis tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html=======================================
For extreme cases:
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jsp================================
If you are in North America, you can call 866-727-2338 for virus and spyware help
infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
international information, see your subsidiary local Support site.Microsoft support - Virus and Security Solution Center
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Error message: "the service user profile service has no logon failed to load the user profile.
Unable to connect.
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947215#letmefixit
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip. It is on the login page. My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.
I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files. How can I fix the desk top to coinside with his status of being online. Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.
Home Group is Windows 7.
Here is the Vista Forums.
What operating system do you use?
Vista info below:
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
WUDFRd failed to load of the device
Hello
I did a clean install of Windows 7 64 bit and everything goes fine until I started to add the specific drivers of lenovo t61p. I get the following in the Event Viewer error message:
The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.
After a lot of Googling, I found that the usb device is a fingerprint reader. remove the fingerprint reader drivers removes the error in Event Viewer.
AuthenTec TouchChip fingerprint coprocessor uses the v1.5.0.289 driver. their website States that the error is a problem with Microsoft. See this link:
http://support.AuthenTec.com/Knowledgebase/KBview/tabid/843/ArticleID/443/WUDFRd-failed-to-load-for-the-Device.aspx, or search their Knowledge Base for "WUDFRd failed to load for the device.
I see that the other members of the forum answers have similar problems, but they still have to find a solution. is that someone in Microsoft could provide an update for a fix?
Yes! After two years, I found a solution. I installed a previous version of Lenovo sw fp and it fixes attention on win 7 sp1 2 t60. I've been running for about 3 weeks and warning went on two PCs. then, download and install IN1FGP08WW1.exe. It is fp s-o of Lenovo in UTEK and there the pilot to clear the warning. BUT it's not as safe as the current Lenovo sw fp. Apparently, she was abandoned when authentic bought UTEK because of this. as I understand it, if someone has physical access to your pc they can decifer pw of windows in the registry. This isn't a big problem for me.
-
Hello
I will apply patch bundle and my oracle database 11.2.0.2 and Microsoft Windows x 86 platform. As read the file Readme Oracle recommends to use OPatch utility version 11.2.0.1.3 or later. To check the inventory availability I use the command lsinventory % ORACLE_HOME%/OPatch/opatch.
It ended to give details below.
Citing O 11.2 patch .0.1.1
OPatch could not create/open history for writing file: * my home oracle path***\cfgtoollogs\opatch\opatch_history.txt
**ORACLE_HOME***\cfgtoollogs\opatch\opatch_history.txt (access is denied)
Setup Oracle interim Patch version 11.2.0.1.1
Copyright (c) 2009, Oracle Corporation. All rights reserved.
OPatch could open the log file, the recording is not possible
Home Oracle: *.
Inventory Center: C:\Program Files\Oracle\Inventory
from: n/a
OPatch version: 11.2.0.1.1
YES version: 11.2.0.2.0
YES location: * ORACLE_HOME * \oui
Location of the log file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log
History of patch file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt
Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.
LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 -.
09_16-27 - 49 PM .txt
OPatch failed with error code = 73
Can someone please help me solve this problem?
Do I need to install the last opatch utility?
Hello
This error message " LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 - .
09_16-27 - 49 PM .txt "
indicates that you have a permission problem with your file systems: cfgtoollogs/ORACLE_HOME/opatch
Check the owner of this file system.
Kind regards
-
did a normal turn on the computer. Message came back failed to load the local profile. IO error. When he signed me, all my documents in My Documents had disappeared.
A corrupt profile is fairly easy to recover with minimal losses. Refer to the following procedure:
"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >Corrupt profiles are almost always accompanied by hard drive corruption. After recovery, scan your hard disk for errors using chkdsk with the /f or/r option
"How to perform disk error in Windows XP check"
<>http://support.Microsoft.com/kb/315265 >The disk check procedure can take hours depending on the size of your hard drive and the amount of corruption and cannot be interrupted, then run it when you won't need your computer for awhile.
HTH,
JW -
start the computer to start but stops at "failed to load the core file?
Original title: how to get Windows XP to boot my computer from starting when starts but stops at "failed to load the core file?
When I try to start my computer, it stops at "cannot load the kernel." It will go no further. What is the solution?
Please see: How to perform a Windows XP repair install
-
I want to create an icon on my desktop to load 2 programs. I tried a .bat file, but it only loads the first program.
This helps you in some way?
Microsoft® Security MVP, 2004-2009 -
the user profile Service service has no logon failed to load the user profile
I received the following message when I try and log in my account to have:
The user profile Service service has no logon failed to load the user profile
What are my options?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
"Whenever I tried to sign up with my password to connect, do the following: the user profile service service failed connection, failed to load the user profile" when I click OK, it disconnects... Help, please
Go to Safe Mode and do a system restore. See the link below:
The user profile Service has not logon. User profile cannot be loaded
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/995955f8-d9d4-4148-840D-c896c3be78b8Follow the links on the post.
-
Failed to load the user profile on my laptop. Help
I can't connect my laptop as his watch the above message, it is 2 years and a half old and isa an inspiron 1525, helps, I know I need to re boot, but as I am not too good with the system and was looking to find out where to download a disc and make sure that I get the right one can someone help me. in my library now wiyh a ubs if I need.
Next time please post the error message in its entirety... verbatim.
What is the real error message?...
Failed to load the user profile and the user profile service does not log
If Yes, read on...
You haveanother admin account , you can connect?
If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.If you don't have another admin account, go into safe mode.
Here's how to get safe mode:
Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.In the window of logon in safe mode...
1 can connect to your account administrator in safe mode?
If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.2. If you can't log into your own account, you see another admin next to your account in the logon screen?
If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and newdo a first system restore, if not help, run the Microsoft tutorial support listed below.If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
How to restore the system:
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlTutorial from Microsoft support :
http://support.Microsoft.com/kb/947215
There are several methods, go through one by one.
Method 3 has a "fix it for me" applicationFor the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
Maybe you are looking for
-
I put an update on only a few minutes ago and got this when I restarted the browser:
Thank you for downloading Firefox, but this version is obsolete. Unfortunately, your operating system is not compatible with the most recent, Firefox more, but we encourage you to download the latest version which is compatible to the place. I have F
-
Portege R600: SIM inserted but error: "device not found".
Hello Portege R600 under XP.Put a SIM card in the slot, but I get the error above: Wireless Manager Toshiba "device not found". Cannot find the configuration options or anything like that in the manual.Can someone point me in the direction of literat
-
Satellite C850 - remove the functionality of the FN keys
Hello I have a laptop C850 who has defined as default for some operations, function keys like brightness, sound, enable and disable the touchpad with the * F1 *-* F12 * keys accessible together with the * key to FN. I can understand why this has been
-
2000 laptop 365DX: need to restore but have a restore partition point or recovery.
Hi guys. I have a laptop HP 2000-365DX with Windows 7 Home Premium. Its so crowded and I need to restore back to original settings. I had installed Ubuntu (partitioned) all the time and has been very stupid, because I deleted my partition recovery
-
Hi all. So I have not used my connect drive in about a month and today I tried to stream a video and was greated with a beautiful giant red banner at the top that says that «wireless stick is in MB USB...» "I guess this should disappear, but it doesn