Viao Duo 11 pointer running because of the upper left corner

I have a Viao Duo 11 hybrid PC since early November 2012. I had not noticed this before, but recently I noticed that the mouse pointer is if run in the upper left corner so often that doesn't let me do my job properly. Initially, about 2 months ago I noticed this but ignored because the problem was not that bad. But now I can't use something works on this computer. It took me 2 hours to write this message because of this problem of mouse. Help me because my computer expesive becomes useless. I googled and found a lot of this questions but no solutions.

I came across the following solution of driver update in the forum of deshminder tablepcreview.

http://www.n-trig.com/files/Sony_Win8.zip

It worked for me. Thanks again to Deshminder.

Tags: Sony Computers

Similar Questions

  • a (small) empty window appeared in the upper left corner of the screen. Running Windows 7. It disappears if I reboot. No idea what it is and what I would do to this topic?

    The white goes away if I reboot.  Using Windows 7.

    Hi Blee3,

    It resembles a small empty window appeared in the upper left corner of the screen. I'll help you with this problem.

    1. have you made changes on the computer recently?

    2. what security software is installed on the computer?

     

    Method 1.

    Start the computer in safe mode and check if that helps.

    Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

    If the problem does not occur in safe mode, then proceed to clean boot state.

    A clean boot to test if any element of service or third party application startup is causing this issue.

    How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

    Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

     

    Method 2.

    You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

     

    Method 3.

    I would like to create a new user account and check if the problem still persists.

    Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

    If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

    Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    I hope this helps.

  • Air iPad 2 has a tiny point blue in the upper left corner

    Just noticed the other day, the ipad has a tiny blue dot in the upper left corner. My warranty is in a few days if there is a question of needs is repair I would take care of it. What is c?

    I don't know what that might be.  If your warranty is about to expire, make an appointment at your nearest Apple Store Genius Bar.

  • I run XP Home Edition and the mouse keeps freezing in the upper left corner of han

    Mouse freezes in the top left corner on xp family, he does not move for several seconds, then starts to work again until I've got moves to the upper left corner.

    Is it a driver problem or regestry?

    Thank you

    Hello Lyndon R.,.

    Thank you for your message.  At first glance, this seems to be a mouse that may need cleaning or goes wrong.  Can you afford to try a different mouse to see if it carries with the same behavior?  Please let us know so that we can help you get this problem is resolved.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • After FlashPlayer 11.04, a site with videos, like YOUTUBE opens a separate process and videos appear in the upper left corner and cannot be moved.

    After update to a version after FlashPlayer 11.02 when you open a window with flash videos on, next to the Firefox process in the taskbar appears a new process with the Flash Player icon and the video window is placed in the upper left corner and cannot be moved. If there is more a video on this page when you click on that Flash Player icon, you can see a list of all the videos.

    Using Flash Player 11.02 this problem does not occur and I used this solution for quite awhile, but now, if I use this version, I get a black window with an error message on security reasons, but if I click on it it plays without any problems. Although in a few Web sites that require Flash, he says he needs at least version 10, but I 11.02 but does not recognize it and ask to be upgraded.

    It's very weird because that doesn't happen in my laptop, I have a desktop computer with the exact same windows and version Firefx and this happens. I already tried uninstalling Firefox completely and even remove all plugins and extensions, and the problem persists.

    Uninstall Flash player also solves this, but then I wonder to upgrade the Flash player. This problem occurs in Chrome or IExplorer 10:

    http://Tinypic.com/view.php?pic=15pn2ab & s = 4

    http://Tinypic.com/view.php?pic=24v2u4l & s = 4

    Recent crashes of some multimedia content (this includes the Youtube videos, some flash games and other applications), in collaboration with Firefox are most likely caused by a recent update of Flash 11.3 and/or Real Player browser plugin to malfunction.

    To resolve this problem, follow the steps in these articles in the Knowledge Base:

    Flash Plugin - maintain and troubleshoot

    Adobe Flash plugin has crashed - avoid that it happen

    11.3 Flash does not load video in Firefox

    We'll find other information on more technical issues under these links:

    http://forums.Adobe.com/thread/1018071?TSTART=0

    http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

    Please tell us if it helped!

  • Why did I downloaded Firefox 4.0, but I do not have the firefox orange box in the upper left corner of the screen. My screen still looks like the old version of firefox. My screen does not resemble that of the video. nothing like that

    My Firefox 4.0 does not resemble something like the videos you show on the new Firefox features. My screen looks completely different from yours. It doesn't have the orange box in the upper left corner of the screen. My screen still looks like the old version. I have the logo on the top of my screen with ask a Question, a vertical line helps Firefox - Mozilla Firefox.
    Under this heading, I have File, Edit, View, history, Favorites, tools, and help. Below this line is a tab Ask a Question Firefox Help and has +. The screen of my husband looks identical to the orange box of Firefox in the upper left corner of the screen. I wish that my screen look identical to those shown in your videos. I have a version of Firefox 4.0 my husband has the Firefox 4.0 and the beta version. How to add the beta version? I have Windows Vista running systems. Help, please. Thank you

    To get the new interface, you need to hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

    If you need to access the menus, you can press Alt or F10 to display temporarily.

  • My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

    My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

    have you tried to change the batteries in the mouse?

  • TX2-1020us digitizer cursor gets stuck 1cmx1cm of the upper left corner

    I have a tx2-1020us

    Sometimes, the stylus cursor takes over and gets stuck about 1cmx1cm from the upper left corner of the screen if the screen is 90 degrees or to move away it from the keyboard when you use it as a laptop. If less than 90 degrees, when this happens, it's somewhat usable but the slider still jumps at the skylight at random.

    I've known as a locking of the keyboard once but removing the power and the battery it is resolved.

    To troubleshoot, I ran the HP and N-trig utilities and they found no problem so even the question that happens. I downloaded the latest drivers from this site and install, I searched on Google and Asus seems to have a similar problem but I don't know if this applies. Sometimes, when I reboot it goes far, other times it is not. Deactivation of the first N-Trig driver stop the question but then of course, do not work the key features.

    I installed the software (for most, MS Office, Corel PSP and NeatWorks) and installed a scanner NeatWorks and GPS MS on it since I bought it last Friday (not connected when it is the case).

    Has anyone else seen this, they are of a resolution, I would stay before 15 days runs out?

    Problem solved!

    Turns, I have a desk lamp fluorescent light about 15 cm from the laptop.

    When the lamp is on and the laptop is plugged in, it does the cursor thing erased. Unplug the laptop or move the lamp 25cm and everything works perfectly. Go figure.

  • I have black spots on the upper left corner on my Pro 100

    My printer started to leave a black stain on the upper left corner of anything beyond 5 x 7.  I changed the black cartridge, cleanied foam more run all maintenance tools.  Thank you

    I feel pretty stupid, but I thought about it. Somehow the paper box, I was working on the upper left corner of all leaves somehow got bent slightly upwards so when the document deleted from the bottom plate that the corner would come just enough print head dragged against the paper. Thanks a lot for your help.

  • Windows media player comes on full screen, but the dvd movie is in the upper left corner 1/8 the size of the player and no sound.

    Original title: Windows Media Player

    I can't run a dvd on my computer. When I insert the dvd, a window pop up and ask 'run with Windows media player '. When I select this option, the player turns on full screen, but the dvd movie is in the upper left corner 1/8 the size of the player and no sound.

    Help, please

    Thank you Tim

    Hi Tim,.

    Have you downloaded or purchased Codecs for the DVD player?

  • I lost my list of favorites, called in the upper left corner of my screen

    I lost my list of favorites, called in the upper left corner of my screen.  You don't know where it went?!

    Hello

    What do you mean by Lost, are you not able to display the list? Press Ctrl and me (two keys) key on your keyboard, and then you can click on the green arrow (pointing to the left).

    I hope this helps.

  • C3180 prints 2345 x in the upper left corner of the blank pages whenever I print

    Whenever I have nothing print from my Mac Book Pro (running Mavericks 10.9), my C3180 spit a page with 2345 x printed in the upper left corner of a blank page otherwise.  Lost my paper and my ink.

    Someone at - it suggestions?

    Hey all,.

    We have released update that resolves this problem of extra page.  You will find this under your support page of SW products as an update.   Here is the link to the update on the C3180 page for example.  If you do not have a C3180, please go to www.hp.com/go/support, click on support and drivers, enter your product and look under your operating system for the update.  It's a quick download and installation.    Thanks again for your patience.

  • Need help! Does not start. Only get '_' in the upper left corner.

    Hi, have the following computer:

    HP-Pavilion model: KZ849AV-ABA s3500Z

    Running: win 8.1 (32B) 2G ram

    Have not had any problems I know, so far.

    Run norton regularly, no problem.

    Stop the machine to get out.  Returned, tuned back on and now will not start.

    It lights up, passes in front of the screen for "F9" "F11", etc.

    Then crashes on startup with a single "_" in the upper left corner.

    No beeps or error messages.

    Have you tried several attempts to diff power off, unplug, etc..  Same results.

    Have tried to interrupt the boot to make "diags", see the boot menu.  Everything seems fine, from what I can tell.

    Don't know what else to do.

    As mentioned, saw no problem before that to my knowledge.

    It helps the tight connections and no keyboard activity.

    Possible victory 8.1 automatic update when the last stop arrived.

    Recovery disks, I did several months ago when I upgraded to OS to win 8.1

    But I don't want to go down that path and reload everything.

    Any ideas how to check the boot sectors, chkdsk, etc.. ???

    Thanks in advance,

    Hi guys, thanks for all your comments.

    I managed to understand.

    I used the 'flash' player who made victory - 8.1 you create during the installation of win - 8.1 fresh.

    It's like a recovery disk.

    I started off of him and was able to use Diagnostics out of it to check the hard drive.

    He said it was to fix hard drive errors, then restarted.  Got the same new cursor. Then run this process again.

    Got mesg diff on the correction of hard disk errors, please wait.

    It restarted again and is came fine.

    Several reboots confirm the problem disappeared.

    I think that probably the hard drive boot sector becomes corrupted.

    I'll keep and eye to it and document, we had this problem with the machine.

    Will chose to replace the hard drive or buy a new machine.  Which ever option the woman wants to take (his machine).

    Thanks for your comments.

    PS You forgot to mention that I disassembled the machine and cleaned carefully.  Back together and restart with the same problem.  Then I did the above stuff.

  • I have a white box that appears in the upper left corner of my screen that I don't know what caused it to appear

    Original title: white spot on screen

    I have a white box that appears in the upper left corner of my screen that I don't know what caused it to appear, my scans came back clean and all system also removes ok, nobody knows what it is or what the cause and better yet how get rid of? I am running windows 7 home.

    Thanks for the info and help! It turned out to be a malicious program that I have my computer in the start of the part of my computer, once I found and removed, the issue and a few other hick-ups disappeared.

  • The Position of the upper left corner of any shape layer

    Hi guys,.

    So for the last two days, I worked on a script that would allow me to centre X number of layers in the middle of the container model, as if the selected layers were just one layer. So my approach to achieve this goal is first to know the positions of the four corners of each layer. My code so far works perfectly with AVLayers and TextLayers, but it does not always with ShapeLayers. Here's the formula I use to calculate the position of the upper left corner of the shape layers:

    x = position [x] - [x] anchorPoint - (layerWidth / 2)

    y = position [y] - [y] anchorPoint - (layerHeight / 2)

    So the formula assumes that the anchor point is in the middle of the shape layer if the anchor point is [0, 0], and which seems incorrect.

    Untitled2.png

    And it's Layer Properties.

    Untitled.png

    So the question is, what is the way to calculate the position of the upper left corner of ANY shape layer?

    Thank you very much!

    It should work as long the layer was not filmed:

    var C = app.project.activeItem;

    var L is C.layer ("shape Layer 1");.

    var r = L.sourceRectAtTime (C.time, false);

    var s = L.property("Scale").value;

    var p = L.property("Position").value;

    var a = L.property("Anchor_Point").value;

    var ul = [p [0] + (r.left - a [0]) * s [0] / 100, p [1] + (r.top - a [1]) * s [1] / 100];

    Dan

Maybe you are looking for

  • network printing

    Hello someone,. Well well... my daughter uses a computer that is "networked" to mine.  When she has something to print, she 'emails' it me and I check his work (essays, whatever) for spelling and so on and print the document she needs for her classes

  • Cannot install silverlights 5

    Original title: Reinstall silverlights 5 I removed silverlights 5 to reinstall the microsoft security essentials and now I can't reinstall silverlights 5 because that my computer thinks it's still there. What to do or how can I reinstall silverlights

  • Built in webcam does not work in windows movie maker

    I just bought an Acer Aspire 4730Z with windows vista and other pre-installed programs. I was looking to take the video to a blog with the cam integrated as I had done in the past on my desk but WMM said that there is no camera. The camera is obvious

  • Error at startup 'Windows could not connect to the Group Policy Client service. "

    http://NS8.upanh.com/B5.S35.D4/b4eeb57376a9063490ccb13a5c59e84d_51157438.error.PNG It's the ball that appeared recently on my desktop whenever I log in Windows 7 Ultimate x 64. Someone knows how to fix this? Please help me as soon as possible :(

  • Construction of error with the sqlite3 library

    A project is built without any problem until I have add the sqlite3 library with which I get the following compilation error: /bbndk-2.0.0/target/QNX6/armle-v7/usr/lib/libsqlite3.so: reference to "decompress" undefinedCC: /mnt/Projects/PlayBook/bbndk