Video appears with red or green dots

Similar Questions

• Windows Movie Maker no video appears with imported files .avi

  Try to make the clips using videos or different formats with no luck.

  Try to use .avi and .mp4s on the movie maker program. Unfortunately it is only to record the audio of the film and not the films themselves. I don't need the audio, but I need the video to make videos. Help, please.

  Try to use .avi and .mp4s on the movie maker program. Unfortunately it is only to record the audio of the film and not the films themselves. I don't need the audio, but I need the video to make videos. Help, please.

  ===================================
  You might have more luck if you convert video clips
  before you import into Movie Maker wmv format.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Features red and green Qosmio F30-117 - display problems-

  Hello

  I have a qosmio F30-117, and until recently, I was thrilled with everything about it.

  Then, mid session, graphics started to deteriorate, which fixed a reboot.

  Then a few days later, he did it again and this time when I rebooted it came with a display corrupted, a lot of aa in all directions then red and green lines everywhere.

  Managed to get by selecting safe mode with network and got a desktop computer but still with red and green lines everywhere.

  Now its got worse again, when I start the screen of the laptop itself is empty, becomes something because it is not completely black as if it was when its engine turned off, but his Blanck.

  To check I have connected to an external monitor and managed to get again in safe mode with network, but still very bad and always red and green lines everywhere.

  I started to take a ride on the old good www and there are many posters and articles with problems and many mentioning the lines red and green etc...
  so I'm not alone, but no one seems to know exactly what it is.

  Some have mentioned the grateful Toshiba this as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  Thanks in advance

  Hello

  In my opinion, this looks like a problem of graphics card GPU eventually started to malfunction, and in this case to replace the motherboard.

  > Some mentioned Toshiba grateful that as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  It doesn't have to be dull I ve also found this update from Toshiba product support page, but there is nothing listed on the problems of F30
  http://EU.computers.Toshiba-Europe.com/innovation/generic/PRODUCT_UPDATE_SUPPORT

  What to say. Seems only a technician ASP might solve your problem, but replacing motherboard is a costly affair so it s your own decision to want to do

  In any case... good luck...

• Re: Satellite P750 - white dots appear with animations, not everything at stake

  White dots appeared with all the animations but note during the matches and need info on a solution to this.
  I did a factory reset again it's an update on the graphics card drivers and now the computer sometimes overheats and shuts down and also to slow.

  Any help would be appreciated!

  It s a Satellite P750 with gt 540 m graphics card

  > did a update on the graphics card drivers and the computer now sometimes overheats and shuts down and also to slow.

  You must use the page of the Toshiba driver graphics driver because this driver is designed for mobile use. Drivers from other sources are not changed and lead to overheating GPU. This may damage your laptop.

  PS: it would be interesting to know if the white dots are visible on the external monitor and when you noticed these white dots exactly (what animation?)?

• Startup problem: first black-wallpaper appears with the logo, and then the screen goes to the Microsoft screen with green moving bar "Please wait".

  My computer is having problems loading the main office. I start it up, the first black-wallpaper with the logo is displayed, then the screen goes to the Microsoft screen with the green bar of movement. After that, the Windows logo appears and makes the sound. A new screen will appear with a "start-up Fund" and he said: "Please wait...". "This form of lasting about 5 to 8 minutes, then the text disappears, with only the bottom upward. I left it sitting there on the blank screen for about 20 minutes, and still nothing changes. I tried Ctrl + Alt + Delete, and shows nothing. Finally restart manually, but the same problem occurs. The only way that this works is in Mode safe mode with networking (which is currently used). I also tried the system restore, but this does not work because by default it must go through the same problematic steps, as mentioned previously.

  Hi ninja_panda13,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  As you are able to boot mode safe mode with networking, put your computer in a clean boot state in order to verify if any third-party application is causing this problem.
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See KB Microsoft article below for more information on how to solve a problem by performing a clean boot in Windows Vista or in Windows 7:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Since the installation of CD images appear with a green cast. also print with a green cast. Earlier versions of Reader were ok. Concerned images do not have an inherent green cast. How can I fix. Could always revert to a previous version which had no pro

  Since the installation of CD images appear with a green cast. also print with a green cast. Earlier versions of Reader were ok. Concerned images do not have an inherent green cast. How can I fix. Could always revert to a previous version which had no problem?  G.W.

  Hi Q8F7B,

  Please let us know the version of the dowry of DC and operating system installed on your system drive.

  Is - this problem with a PDF in particular?

  Could you please also share the screen shot for the same thing?

  Kind regards

  Meenakshi

• How ca I remove the yellow background (with red vertical lines) all my videos to my preview screen?

  In recent weeks, all of my videos (even those created before) now have a yellow background with red vertical lines when I stop (only when I stop). That, when I export, it creates the vertical issues with colors.

  I finally had someone from the tech group to answer! Here's the answer: the issue you report is a known problem / bug in first 2015 on mac 10.11 with Nvidia graphics cards. I advise you to change the rendering engine for 'Software only' for this problem.

  and it worked! Hooray!

• Photos in the develop module are covered with red dots [was: I am really new to Lr and clueless...]

  I am really new to Lr and clueless... when I take my photos in the area 'Developing', they are covered with red dots like bacteria.  What I am doing wrong?

  In the top right of the screen to the point, you should see a histogram representing the tones of the image. It has a triangle shaped button in each upper corner.

  The left button displays blue Shadow markers for any areas that are at, or very close to, 'black '.

  The right button red poster to highlight markers for all areas that are at, or near, blow 'white '.

  Click these buttons to the markers on the image (toggle).

  (You can view markers temporarily, when turned off, flying over the buttons of the mouse without clicking)...

• PP does not make the preview of video files (videos exp with Xvid MPEG-4)

  Hello everyone, I'm doing a video using files that have been compressed using Xvid MPEG-4 codec. As soon as I use my shortcut to return to to, PP actually plays the video instead of make. The same thing happens no matter what type of rendering option, I try. Also the bars for rendering do not appear at all (red, yellow, green). If I try this with any other type of video it works completely fine, but when I use this codec in particular, no, no, no. So, what could be the problem here? The videos where made from .tga, using VirtualDub to put them together in a video, compressed format with Xvid MPEG-4 with a color depth of 24-bit rgb. Waiting for your answers.

  Thank you very much!

  Specifications of the PC: 1xE5649, 48 GB RAM, GTX 650 Ti, SanDisk Extreme Pro 480, Seagate 1 TB 6400 TR / MIN 32 MB.

  XviD/Divx are output files, not intended to be modified (variations of the codec MPEG4, often used for streaming video on the Internet) so, they mostly edit NOT well (if at all) in any same version of Premiere Pro or Premiere Elements, if used within an AVI container... Even the STAFF tell you! http://forums.Adobe.com/thread/1441404?TSTART=0

• The cursor to select the search engine is missing and replaced by a white 'More' in a green dot.

  Ok. I saw messages that explain what the 'green point '. That's all fine and dandy. The exception - I WON'T!

  When this pretty green dot is there, I can't right-click on the selected text and choose where I want to get him. The default search now only Google.

  So my question is; How can I get rid of this shit? I have NO use for it. I don't want to. I don't need. I want GONE! I want the old cursor backward! (To add insult to injury, the cursor no longer appears even when the 'point' is not there.)

  I'm using Firefox under win7 SP1 43.0.1

  Thanks in advance for your help,

  Yosen

  The green dot with several white means that the site offers a search engine that you can add to Firefox.

  • http://www.gHacks.NET/2015/12/16/how-to-restore-classic-search-in-Firefox-43/
  • http://www.gHacks.NET/2015/09/22/Mozilla-to-improve-Firefoxs-search-interface-in-Firefox-43/

• Windows Movie Maker, after the problem - red and green

  When I change my movie with Windows Movie Maker preview is fine, but after the publication of the project, the film is red and green. What can I do to fix this?

  I solved this problem. But I think it was because of the video quality of my webcam. Director of Windows try to enhance the video at the time of publication. So that's my new problem. Can I update my webcam as well?

• The "green dot" lens flare in the iPhone 7 / iPhone 7 more

  I wrote on 'green point' lens flare issues I have with my iPhone 6 Plus. See Green dots in the iPhone 6 more photos - it's something that can be fixed? photos, for example.

  I was hoping that this problem has been resolved with the new iPhones, two years later. But as I see in this review of the iPhone 7 - http://www.techconnect.com/article/3122614/iphone-ipad/iphone-7-review.html?utm _ source = Sailthru & utm_medium = email & utm_cam... - if you look at the car first two photos, the author shows 'green point' stray light is present in the iPhone and iPhone 6s 7 photos.

  So I'm disappointed to see that this problem has not disappeared.

  Does anyone know if this is also the same with the iPhone 7 Plus, which has two glasses?

  Just wondering if any iPhone 7 more users have been able to test this.

  Before the upgrade, I would like to know if the "green point" lens flare problem that exists with the iPhone 6, iPhone 6 Plus, iPhone 6s, 6s iPhone more and apparently also with the iPhone 7 also happens with the iPhone 7 more.

  It has a system of different lenses, so I'm curious to know if this problem persists or not.

• Have a grey bar at the bottom of the screen with red print that I can't remove.

  Since a recent update a gray bar with red print appears at the bottom of my home page every night and I can't get out. It does not appear to be a problem with any function, but I would like to know what it is and how to close it.

  Hi, this is a bug with adblock more in the latest nightly. Please see if they already have an update is available to fix this known or well to keep the disabled extension for now...

• Why my addresses 'To' appear in red?

  Most of the time, whenever I have manually enter my recipient in the field 'To', the characters appear in red. Thunderbird trying to tell me something about my recipient? If Yes, what? The names are / is in my address book.

  In general, red font indicates simply that the e-mail address is not in an address book.
  However, recently there is a bug report on reproducible red font when entering email address manually in on the field.

  The good thing is that it's just a Visual nuisance. It does not affect the address of e-mail or effect nothing to do with sending emails. So don't be worried.

  However, if you have people in the address book there is a simple way of selection using the Sidebar "Contacts".
  In a new message of Scripture.
  Select the "Contacts Sidebar"
  "View" > "select"Contacts Sidebar"toggle the view using the f9 key or."
  Select the address book
  Select contacts
  Click on the button 'TO Addto' or other options.

  Note that you can also drag and drop a name of the sidebar of Contacts in a field to.
  You can select/highlight more than one contact by pressing the ' Ctrl' key while using the mouse to select, and then click one of the buttons "Addto to."

  See the image to help him.

• Red/yellow/green points

  Is it possible to expand the red/yellow/green points top left? Have a client who is visually impaired. The arrow cursor to expand, but it's hard to navigate on the points - they seem pretty tiny when the user is 94. Thank you!

  Hi awwhite975,

  I understand that you want to resize the closing , minimize the , or maximize a window of buttons across all applications on Mac. your client I can give some suggestions to help out you.

  First of all, I would look to see if they use a Mac to Retina display. If they are, you should see something like the image below when you go to the System Preferences > monitors.

  

  As you can see, you will have the possibility to enlarge the text, in addition to these buttons. Take a look at the first article below who speaks with a Retina display.

  With the help of a Retina display
  https://support.Apple.com/en-us/HT202471

  Now, if they do not use a Mac of the retina, then you can simply change the resolution on a different scale. It just won't look too strong, but will accomplish what you're looking for. It is located in the same place, System Preferences > displays and you will see an option for chipped. It would be more a matter of selecting the resolution that suites your client.

  OS X Yosemite: set the resolution of your screen
  https://support.Apple.com/kb/PH19043

  The last thing you can do is allow zoom to your customer. This can create a small window which will zoom around the cursor, so they can click on one of the buttons. Take a look at the following article to go on these types of accessibility on a Mac.

  OS X Mavericks: use accessibility features
  https://support.Apple.com/kb/PH14322

  Have a great day!