Video Copilot 3D and error messages from distortion of the heat element

Similar Questions

• Satellite Pro U200 - error messages from storage during the shut down

  I use Office XP, Office 2003, Adobe Acrobat 7.0, internet explore, copernic search machine and some other programs. The Task Manager said after a complete reinstall (recovery CD Toshiba) with about 60 process.

  Now, I got to 71. I've updated the LAN driver, use a norton security system, all inclusive Windows XP update
  and however - only 2 days after complete reinstallation I am facing once again error messages, which indicates that a process could not put storage.

  Hotline or an engineer on the Toshiba site could help me on the issues. Hardware (RAM, hard disk) will have been controlled and that okay.. In addition to the error messages when stop I also got the phenomeonon this laptop is not stopped completely and was for hours (blue screen indicating that the computer stops) until I turned off with the key for 5 seconds.

  What could be? I had a few other laptops before and I ran identical programming on them - and I have never had these error messages.
  I checked the task Mgr before stopping and no process was running - however this error messages that a program cannot be put in storage rises.

  Hello

  For me it of clear. You have installed so many applications, and some of the background process may be completed when the laptop stops.

  For me its amazing how many applications are running in the background.
  You write something about 71! I also installed many applications, but on my background portable 40 processes are currently running and for me it a very high value.

  I think that you should check you msconfig (type msconfig in the run window) option and check the background processes that are not important. Turn off also automatically load it at initialization of the laptop.

  Unfortunately, but there is no other solution.

• Error message when you install the first elements 10 on my PC

  I bought the Pack Adobe Photoshop Elements 10 and Adobe Premiere Elements 10... and when trying to install, have successfully installed Adobe Photoshop Elements 10, but get an error message when you try to install the first Elements 10.  The Error Message reads as follows:

  This installation package is not supported by this processor type.  Contact your product vendor.

  Now that?  I don't know what to do from here.

  Could you please someone get back to me?  Thank you

  Hello

  Disc 1 contains the installer for 32-bit Windows.

  Disc 2 contains the installer for Windows 7 64-bit.

  Disc 3 contains the installer for mac OS.

  Disc 4 is the content of the disc for Windows Adobe Premiere Elements.

  Disc 5 is the content of the disc Adobe Premiere Elements for Mac OS.

  You can install from Disc1, 2 or 3 depending on the operating system running on your computer.

  Thank you

• Impossible to install World of Warcraft and the error message "Windows cannot access the specified device, path or file. May not permissions to access you the item.

  Original title: Need help ASAP please

  Hi all

  I am currently running windows 7 and recently I met a problem that has been giving me the error code: 0 x 80070043 and the Error Message: Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item'. When you try to run a Setup.exe for world of warcraft. But the thing is I am the administrator of the computer and have not had this problem in the neck, it is their all settings or something I can do to fix this? any help would be greatly appreicated thanks and God Bless.

  Hello Jay,
  Thanks for posting your question in the Microsoft Community forum.
  The description of the problem, I see that you are unable to install World of Warcraft and error message "Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item".»

  This problem may occur if you do not have permissions for the file or the location of the file, if the file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer or your antivirus software may block the file.

  Don't worry; Let's try a few steps that will help you solve the problem.

  Method 1:
  I suggest you run the fix it and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244
  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Cannot print and get an error message from the printer saying to close the scanner cover

  Original title: I can't seem to print on my Epson Workforce 845.

  I can't print from my computer running Windows 7 Home. I get an error message from the printer telling me to close the scanner cover. I can print without problem of my computer running Windows 7 Enterprise.

  Hello

  (1) is your computer connected to a network?

  (2) did you of recent changes to the computer before the show?

  (3) what is the exact error message?

  You can run the troubleshooter printer on the computer that faces the question and check if it solves.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also consult the following articles and check if it helps to solve the problem.

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Install a printer: http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  For any further assistance, I'd contact Epson printer manufacture support.

  Here is the link: http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=184583&infoType=overview

• "I tried to load a Turbo Tax 2011 program and and the error message came up to the top -" D; "-is not a valid win32 application".

  "I tried to load a Turbo Tax 2011 program and and the error message came up to the top -" D; "-is not a valid win32 application".  In D, I got the TurboTax 2011 loading program. Can you help me fix this problem? E-mail address is removed from the privacy *.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_install/win-32-file-missingwindows-xp/ee455a05-8e32-4353-9ab6-656f2cbd222d

  Pete,

  If you right-click "My computer" and select 'Properties', under the general tab, you should see your version of Windows XP... That said your current pack service is?

• error messages from 631/651 with mobile broadband Sierra

  Constantly disconnecting Sierra without my help and give me 631 and 651 error messages. Did not initially so I wonder if the automatic updates caused it. Sprint said there is a Microsoft problem but I installed all the updates and nothing's worked.

  Hello

  1. What is the full error message that appears on the computer?
  2. What is the model number of the device?

  Method 1:
  The steps in the link and check it out, try:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  You can also try to update the network adapter drivers and check:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  You can download the driver\software from the manufacturer's Web site. See the link for help:
  http://www.sierrawireless.com/en/support/downloads.aspx

  Method 3:
  I also suggest you to turn off the antivirus and check if it helps
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• I connected my computer to the tv using an s-video cable, but I get a tv error message that says that the entrance with no signal.

  original title: pictures playing on tv

  I connected my computer to the tv using an s-video cable, but I get a tv error message that says that the entrance with no signal. I know that I have selected the right input of the TV. Is there something that I need to set up the laptop to send the signal to the s-video connector?

  Perhaps the following links will propose a few ideas:

  How to connect your PC to your TV
  http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set How to connect my computer to a TV
  http://hookpctotv.com/ PC to TV cables and adapters
  http://www.SVIDEO.com/PC2TV.html

• error message from Windows media player C00D0FEA

  What is the error message from windows media player C00D0FEA and how to fix it?

  Hi blaque007,

  (1) when exactly you get this error message?

  (2) since when are you facing this problem?

  Please quote the complete error message you receive.

  C00D0FEA: this error may have been triggered by an error in another program or a component of Windows.

  See the link below

  C00D0FEA

  Method 1: You can check the link below that relates to a similar question

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/1bb18155-1614-4ad6-9e78-90bcd08deb0a

  You can see the link below for more information:

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Have set up my own domain and linked to my portfolio but I get an error message when I type the URL, y at - it somewhere I need to "publish" the site?

  Have set up my own domain and linked to my portfolio but I get an error message when I type the URL, y at - it somewhere I need to "publish" the site?

  To all those who have suffered from this problem of background, there is a "Publish" button down green...

• When I start my computer, I get and Error Message (InfoCenter.exe - Application error)

  When I start my computer, I get and Error Message (InfoCenter.exe - Application error) that someone knows what this means and why I make it?

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same error occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  I suggest you try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Check if that helps.

• having video display problems - C000D11DA error message - how to fix

  having video display problems - C000D11DA error message - how to fix

  Hello RobertHollman,

  -You try to play the media file online or the file that is saved on your computer?

  -What version of Media Player do you use?

  This problem occurs if the management of digital rights (DRM) system is damaged on your computer.

  Follow the steps listed in the article below to solve the problem:

  Error message when you use Windows Media Player 10 to play multimedia files online: "C00D11DA - Windows Media Player cannot play, synchronize, or burn a protected file because an error occurred when checking the license."

  Thank you!

• When I insert a CD of the application, I get the error message - 'windows cannot access the specified device, path or file. You may not have access to the item. I tried pretty much everything including a new CDROM and loading on safe mode.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Mefrombigd,

  1. it happens with all types of CD?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  4. you receive the error message when you insert the CD into the CD drive?

  Method 1

  Check if you can access the contents of the CD using Windows Explorer application.

  (a) click the start menu, and then double-click computer.

  (b) make a right click on the CD drive, click Open.

  (c) check if you can access it.

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When turning on my computer always error message "drive: c / on the Neurofibrillaire degeneration and is currupted.__How can I solve this problem?

  When turning on my computer always error message "drive: c / on the Neurofibrillaire degeneration and is currupted.
  suggest how to check the disc I have to press a key before 6 second, try that, but nothing is coming.

  How can I solve this problem?

  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  See if help above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 - error message from the address conflict IP appears periodically. Error message "another computer on the network has the same IP address as this computer.

  Error message "another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log"

  Does anyone have a simple way (for a dummy) to solve this. If I disconnect my wireless router and laptop and turn the two again this sorts the problem temporarily, but it does not provide a definitive solution.  I use a new laptop and my old one has been scrapped, so I do not know whence this 'conflict '.  My old laptop had Windows XP operating system and my new Windows 7.  I hope that someone can provide a solution to this annoying problem.

  Hi Figgerty,

  have you tried these steps?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/IP-conflict-error-another-computer-on-this-network/4eed87e2-45FD-4FF7-ae29-9a9fb664a8cc

  B Eddie