Video drivers are not installed
I reformatted my daughter's laptop and reinstalled Windows XP Home Edition today. The portable computer is an Inspiron 6400. I have the driver disk and was able to install all the drivers except for the video driver. When I try to install it I got the error message "one or more files required for installation are missing or damaged. The Setup will exit. "I went to Dell to get drivers online and it's the same thing. There is a yellow exclamation point in my manager devices next to "video controller (VGA compatible)".
I searched the web for solutions and see that others have had this same problem, but I have not found someone who does not yet have a solution. My daughter leaves for College this weekend and I need his laptop to work properly! If you can help, I would be very grateful.
Elizabeth
Tags: Dell Laptop
Similar Questions
-
Satellite A300-1MC: network controllers drivers are not installed properly
Hi guys...
My first lol just purchased Toshiba and I can't ge the wireless to work?
Toshiba A300 - 1MC Intel T5800 3gig of ram 20gig hard drive Vista Home wired Internet access works ok, but in Device Manager it says my network controller drivers are not installed properly?I have reset to setting faactory and reinstalled everthing but its still the same.
Ideas a BIG help thanks in advance.
This strange s
Usually, using the operating system recovery disc must be set to the factory setting and everything should be ok.However, I recommend first upgrading the BIOS, then the LAN/WLan card driver.
The card chip Realtek (Realtek 10/100 Base-TX) LAN and WLan card chip is Intel (Intel 802.11 a/g/n WiFi Link 5100AGN)Download the WLan driver from this page Toshiba WLan:
http://APS2.toshiba-tro.de/WLAN/and the LAN driver can be downloaded from the Realtek page, or on site pilot European Toshiba too.
Remove/uninstall the old drivers and then install the new drivers.Good bye
-
SM Bus controller device drivers are not installed (code 28) XP Home Edition
Recently, I installed Norton 360 and ran a diagnostic report which found the device SM Bus controller drivers are not installed (code 28). I tried to re - install from the original disc of XP Home Edition, but he couldn't find it. Where can I download this from and how to install iI? Thank you.
Hello
Thanks for posting your query in Microsoft Community.
According the information you have provided, I understand that you found the error code 28 in Windows XP. I will certainly help you in this matter.
Please follow the link and check it out.
Explanation of error codes generated by Device Manager in Windows XP Professional
http://support.Microsoft.com/kb/310123
Using the windows-related issues feel free to post on the Microsoft Community Forum.
-
Device drivers are not installed
Analyzer performance and Windows 7 resources, said that the device drivers are not installed, but I can't find the specified driver - Win32_PnPEntity.DeviceID="PCI\\VEN_1180&DEV_E230&SUBSYS_9071104D&REV_00\\4&1EAEF792&0&01E1"
How can I download the driver?This seems to be a Ricoh PCIe Memory Stick Host Controller.
Go to your computer manufacturers web site a glance of the drivers for your model.
-
Soundbooth gives an error message when launching say that my video drivers are not compatible
Soundbooth gives an error message when launching say that my video drivers are not compatible
Original title: Adobe soundbooth cs5 video drivers
Hi Mike,.
To update the drivers, then check if it helps. Follow the steps in the link given below. -
Original title: my browser does not correctly code 28
Hello
my browser is malfunctioning Device drivers are not installed code 28.
Details that are in Device Manager
PCi Simple communications controller
Another property
Harware IDS
Value
PCI\VEN_8086 & DEV_29C4 & SUBSYS_50448086 & REV_02
PCI\VEN_8086 & DEV_29C4 & SUBSYS_50448086
PCI\VEN_8086 & DEV_29C4 & CC_078000
PCI\VEN_8086 & DEV_29C4 & CC_0780
Thank you, Kat
Hi Kat,
1. what web browser do you use?
2. are you unable to go online?
3. have you made a recent software or hardware changes to the system?
This error indicates that the drivers for the device are not installed.
The ID of the seller seems to be related to the drivers of Intel.
You may be prompted to provide the path of the driver. Windows may have the driver built-in. If you are prompted for the driver and you don't have it, you can try to download the latest version of the driver from the computer or the device manufacturer's Web site.
You can also try to download the latest version of the computer manufacturer's website Chipset drivers and check if it helps.
Updated a hardware driver that is not working properly
For more information, see the article:
What to do when a device is not installed correctly
Hope the helps of information.
-
HP Dm1 3025DX network controller drivers are not installed after reinstalling windows
Hello
I have a laptop HP Dm1-3025DX Windows 7 home premium 64 GB and after reinstall windows from the network controller and Ethernet controller both say the drivers for the device are not installed. I can't understand how to solve this problem or download either. I don't have access to the internet on this computer so I use another computer for this post, and I'll have to use this computer to download drivers also. Help, please!
Judging people, see if they install.
-
When I try to install the drivers under sound and also imaging devices he returned with access denied and the code 28 error and said that the drivers for this device are not installed.
Hello cal26,
Have you tried to visit the website of your computer manufacturer to see if a driver/software update is available for your computer? Hope this helps you. Let us know anyway. Make it a great day!
"And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)
-
Bluetooth Peripheral device drivers are not installed. (code28)
Good day to you, Sir
I USE THE SONY VAIO VGN - CR 37GN, I HAVE THE DRIVERS FOR BLUETOOTH PROBLEM DEVICES ARE NOTPROPERLY INSTALLED AND CODE IS 28 CAN YOU ME DO CERTAIN THINGS TO SOLVE THE PROBLEMTHANKING YOUEMMANUELGood day to you, Sir
I USE THE SONY VAIO VGN - CR 37GN, I HAVE THE DRIVERS FOR BLUETOOTH PROBLEM DEVICES ARE NOTPROPERLY INSTALLED AND CODE IS 28 CAN YOU ME DO CERTAIN THINGS TO SOLVE THE PROBLEMTHANKING YOUEMMANUELHave you installed the correct drivers?
-
PCI data acquisition and Signal controller and SM Bus controller drivers are not installed
My laptop is Toshiba satellite L305 with Intel Pentium (R) Dual CPU T3200 2 GHz / 2 GHz.
Rescently that he has been upgraded to Windows Vista Ultimate Edition, 32-bit operating system. Since then, my USB device wireless to connect to the internet is not worked. The Device Manager displays a yellow! Select this option for PCI Data Acquisition and Signal controller and the Bus controller. The details for the two area said that pilots are not kept.
How can I get these drivers. I'll appreciate your help, thank you.
Carlos
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
Toshiba support at the above link
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download
Toshiba Driver download at the link above
http://laptopforums.Toshiba.com/
Toshiba laptop Forums at the link above
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Access the site of the manufacturer of your laptop to the link above > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.
See you soon.
Mick Murphy - Microsoft partner
-
Hello
If I do not install device with LabVIEW drivers can I still change any given LabVIEW program created with this version? Or do I need to install device drivers if I'm editing a program that uses these drivers?
Thank you
Dave
What you reinstall? The dll is part of the traditional DAQ driver.
-
CQ60-210US: coprocessor drivers are not installed Code 28 Compaq CQ60-210US
I rebooted just this computer last night and in the properties of the device, I have a coprocessor under other devices, which is not installed correctly with a code 28. I tried to manually install the drivers to search the whole computer.
Try this one...
This package contains the driver that allows the NVIDIA nForce Chipset MCP77MV in the notebook models and operating systems.
File name: sp39535.exe
-
HP Officejet Pro 8600 N911a - printer drivers are not installed. I need PDF on EWS
I have had nothing but issues with trying to keep the installed Officejet. Once I installed it after several attempts as it works very well. But that's the thing. Just got a HP Laptop back for repair due to a hard drive failare. Which means that I now reinstall the printer.
I bought 4 systems over the last three months with running Windows 7 with the CPU Haswell. Each of them came from original PC and the digital storm.
There is no reason I should have as many issues over the past three years with the installation of the printer and keep the drivers installed.
I know that the solution would be to use the built-in Web server and configure a static IP address. However because I have now 5 systems with AC wireless network adapters. I have to use the new XFinity Cisco 3939 2 gateway router.
With on my Linksys. This means that because the firmware they use I can not put a static IP address, that would probably solve most of the questions. It is because of the gateway which need to have Auto value chains not manually the value 1-6 or 11. In the SAP, there is a way to adjust the manual channels as well as the implementation of the static IP address. But I don't know what the consequences would be.
I would really like a complete informative PDF manual on all parameters.
When I try to configure certain protocols everything seems to match the system but when I hit OK I get an invalid error.
Without the ability to go through it with a HP technician a manual would be my first choice.
However, $99 for a a phone call on one $125 for another 8600 or 8610 seems unnecessary. So if you can find a complete manual (not the single line I found online) I would sincerely appreciate it. Please email me with a response of some kind solution. Thank you very much.
Hi, take a look at this HP link about this problem.
-
Pci device drivers are not installed.
Hello
PNP device ID is PCI\VEN_10EC & DEV_5209 & SUBSYS_3673103C & REV_01\4 & 71E4D04 & 0 & 00E4
Can someone help me to download this device driver?
Operating system is windows 7 ultimate 32 bit
Model laptop is HP 431
Thanks in advance
Taarika.
It's the card reader.
REO
-
Original title: Running Win7 on Bootcamp. Error: The game could not create the Direct3d device. Please make sure your video drivers are installed properly.
I try to play Psychonauts out of steam. I am currently running Windows 7 via Bootcamp on my MacBook Pro 13-inch mid-2010. When I try to run the game, I get the message:
The game could not create the Direct3d device. Please make sure your video drivers are installed properly.
I tried to update DirectX, and I tried to download the Nvidia drivers associated with my laptop model. How can I solve this problem?
Thanks again for the help.
I'm not familiar with Apple but I found this:
http://support.Apple.com/downloads/#NVIDIA
Except that it is what I have from NVIDIA:
http://www.nvidia.com/object/notebook_drivers.html
Previously, only the original beta for mobile graphics drivers were available on the NVIDIA site with manufacturers having full control and ownership of the final version.
Maybe you are looking for
-
Unable to play the purchased songs iTunes - original file not found error?
Unable to play the purchased songs iTunes - original file not found error?
-
Portege A600-13D - webcam stopped working
Hello I have a Netbook Toshiba Portege A600-13D old, I am very satisfied with it, but lately the WEBCAM does not work and I have no idea what to do. If I try to activate the camera, I have the answer: The WEB camera could not been initialized Systemc
-
The HDD U940 - 12 c - partition SSD satellite configuration-
Hello. I have a Satellite U940 - 12 c, really niiiiiice netbook but I have some problems with the operating system and the initial Setup. Finally, I got the free Toshiba Recovery DVD (as it was not my fault, but a software one), but now I have a mess
-
squares appear instead of letters to various places in windows.
Squares appear in various places, including the headings of the different programs, rather than letters. By clicking on the element shows a correct operation.
-
My laptop HP three year with Vista & IE 8 will not come out of hibernation. It has been like that for more thanseven hours. The light turned on, even when I pressed the button down. I was afraid to push the button down and hold it for 5 to 10 seconds