Video embedded do not return to the first image when navigating between pages

Similar Questions

• The action of the button Back/will not return to the first page open on a tab

  From a few weeks ago (I believe that when 3.6.16 is released), I lost the ability to return to the first Web site loaded on any tab by using the previous button or right click-> menu back.

  I upgraded to Firefox 4 and I still see the same question.

  This happens if the new tab is created from a link on another tab of an item in my toolbar bookmarks, or if I have on a button open new tab, then the initial Web page in the address bar or in my bookmarks toolbar.

  When I navigate to the second site in this tab via a link, manual entry or a bookmark, the previous button is active.

  If I navigate to other pages and a right click on the back button, the first page I have loaded is not listed in the history.

  It is possible to my modules or something is causing this issue? I can't think of any possible configuration setting that would entail.

  If not, should I submit a report in Bugzilla? I couldn't find a corresponding bug report, but it seems that it would have been stated several times if someone else saw this question.

  Edited to stop scrolling - Maurane

  With the back button does not, problems are caused by the McAfee Site Advisor, if you uninstall or disable this extension, the back button should work again.

• Adobe Edge (with video) + Sizmek does not load on the first attempt in Firefox

  We tried to get a series of Adobe Edge HTML5 with video to work with Sizmek and Firefox and have had no luck.  We did a series of works autour and nothing seems to work.

  But if we do a sequence of basic Adobe Edge it works fine, but as soon as that video is attached it crashes and does not do anything (on initial load).

  We found this banner of Adobe Edge with video works with all browsers except Firefox unique.

  So far, we tried the following solution.

  What has not worked

  • Move the code of compositionReady edge of Sizmek at the head of the document.
  • Mix video load order in the file edge.js
  • Reduces the size of the video thinking it could be a weight of file problem.

  What worked

  • Deleted the video in the Edge file and have basic animation and it works very well.
  • Removed the Sizmek EB codes and it is loaded with videos, but is of no use to us because it does not respect the framework of ad Sizmek platform.
  • Re-build the banner using only the model Sizmek with greensock and works perfectly.

  Have contacted us the support of Sizmek and crossed a few developers and they said that the issue is in the ship's library and the compositionReady event is not dispatched to the first loading of Firefox.

  They have also done a few tests and think it might be a big problem with Adobe Edge and asked that contact us Adobe to find a solution.

  Can someone please point us in the right direction or other solutions of workaround to get the edge work "reliable . ” with Sizmek and Firefox?

  We know that we can build with just all the code, but our digital designers are not coders and need a solution to animation of timeline as opposed to a text editor. (With "Edge animate the logical progression of Adobe Flash for them")

  
  

  Thanks in advance!
  

  My current configuration of the system: MacPro (end 2013)

  Operating system: OSX Yosemite 10.10.4

  Animated adobe Edge Version: Adobe Edge CC 2015

  Version of Firefox: 38.0.1

  
  

  Here is a preview link:

  http://platform.mediamind.com/Eyeblaster.Preview.Web/default.aspx?previewID=9tJlNivoKiW3dH KTuk0LbbCgEiv2EIykKfVwKNgMDykKfuZrA44UDg % 3D % 3D & AdID = 31080610 & lang = en - us

  
  

  Link of the Adobe Edge sample file:

  Dropbox - 970 x 250-video - standard.zip

  .. .on investigated further. including an ogv version seem to fix this problem for some reason any (FF should play mp4s without problem).

  The VGO must be first in the order of the source. I think that this must be done manually in code.

• Want to just clear the values in the command prompt when moving between pages

  Hello
  
  I wanted to know if its possible.
  
  I want to erase the prompt value when moving a page to another page in the dashboard is
  should show the way it was when displaying arriving first to the page. Is this possible?
  The problem is that I have a guest of the region as well as a few other guests of column in page 1
  Still in page2, I have even invited to the region and another message from page2 column.
  I think that since the same tablename.colname when I select the APAC region is mentioned guest in page1
  in page 2 also APAC is selected by default
  
  I want to avoid this?
  
  I use obiee 11g
  
  Thank you

  Jin

  have you checked the scope of your prompt? Make a prompt page and it should solve your problem.

• * Flash animation loop but going back to the first image {want to hold on to the last image}

  I came across this article in loop animations = http://www.quip.net/blog/2006/flash/how-to-loop-three-times

  I am a novice with flash and just try to connect to some place ads and make it work for the first time.

  Everything worked for me in the article... the only thing I wanted to do, but you have not found that the answer to how do to stop the animation on the last frame after a loop is completed, instead of automatically return to the first image is?

  What is the most easy/most effective way for this?

  The shutdown script does not work... still goes back to the first image.

  For all my flash ads, imported FLV video... so I don't know if this is a feature for flv / video that auto-rewinds to first frame...

  Thank you very much, really appreciate any idea on it.

  The sooner you can take a minute to return best

  you add your video in the timeline.

  Add a stop() in the correct location works for me: create a new layer, insert a keyframe in this layer to the last video image and add a stop() in Control Panel actions.

• How do I loop back to the first image of the last frame?

  Hello

  I am currently working on the framework for a product Viewer.

  I have:

  a clip called "viewer_mc", which contains the images taken from different angles of the product. The actionscript code generates a script on the last frame of which returns to frame 1.

  a button instance called "autoplay_btn", which plays in the music video of whatever the current image is and stops on image 1.

  a left and right button are used to move the clip from the film frame, to give the appearance that the product is running.

  I managed to make him:

  having the clip play through both, return to section 1 and stop.

  have functions return button when held down, move the image in the clip using nextFrame and prevFrame commands. Right-click successfully continues a loop round the frame 1 and continues operation to give the impression of rotation.

  The last problem I do experience becomes the left button to act accordingly, ranging from the first frame to the last and continues to operate.

  Here are my actionscript so far:

  import flash.events.MouseEvent;

  var lastFrame:Number = viewer_mc.totalFrames;

  var thisFrame:Number = viewer_mc.currentFrame;

  var backFrame:Number = viewer_mc.currentFrame - 1;

  1. This is the part that gets to play through once before returning to the first image. I think that maybe the problem which I am facing is because of the part "viewer_mc.addFrameScript (lastFrame-1, initially)", that is even if I am now the left button, returning to this script and therefor have bounced back immediately to the first frame. However, there is no flickering on the screen that you would expect if that were the case

  Note: as this is a viewer of generic product that I can use as a template I use lastFrame etc. as opposed to the entry of the value in

  function initially () {}

  viewer_mc.gotoAndStop (1);

  }

  viewer_mc.addFrameScript (lastFrame-1, initially);

  2. it is the functionality for the autoplay_btn that will play through a rotation / return the Viewer to the initial view (front) of the product (fig. 1).

  autoplay_btn.addEventListener (MouseEvent.MOUSE_DOWN, autoplay);

  function autoplay (ev:MouseEvent): void {}

  var startFrame:Number = viewer_mc.currentFrame;

  viewer_mc.gotoAndPlay (startFrame);

  };

  3. it is the right key functionality, which once held, moves the clip to the next section via the function "rotateRight" based on the order "nextFrame. It loops back rounded up to the first image due to the 'viewer_mc.addFrameScript (lastFrame-1, initially)"script generated on the last frame of the clip you want.

  right_btn.addEventListener (MouseEvent.MOUSE_DOWN, rightDown);

  function rightDown(e:Event) {}

  stage.addEventListener (MouseEvent.MOUSE_UP, stoprightDown); Wait for the mouse upward on the stage, in the case where the finger/mouse moved out of the button accidentally when they release.

  addEventListener (Event.ENTER_FRAME, rotateRight); While the mouse is down, run the function check once each image according to the frame rate of project

  }

  function stoprightDown(e:Event):void {}

  removeEventListener (Event.ENTER_FRAME, rotateRight);  stop the execution of the function check each image now that the mouse is in place

  stage.removeEventListener (MouseEvent.MOUSE_UP, stoprightDown); remove the mouse listener to the top

  }

  function rotateRight(e:Event):void {}

  viewer_mc.nextFrame ();

  }

  4. This is the feature of the left button, which once held, moves the clip on the framework of prev function «rotateRight' based on the «prevFrame» order And that's where the rub, because while it works to get the movieclip to frame 1, it loops round to the last image and continue to operate, as you want.

  left_btn.addEventListener (MouseEvent.MOUSE_DOWN, leftDown);

  function leftDown(e:Event) {}

  stage.addEventListener (MouseEvent.MOUSE_UP, stopleftDown); Wait for the mouse upward on the stage, in the case where the finger/mouse moved out of the button accidentally when they release.

  addEventListener (Event.ENTER_FRAME, rotateLeft); While the mouse is down, run the function check once each image according to the frame rate of project

  }

  function stopleftDown(e:Event):void {}

  removeEventListener (Event.ENTER_FRAME, rotateLeft);  stop the execution of the function check each image now that the mouse is in place

  stage.removeEventListener (MouseEvent.MOUSE_UP, stopleftDown); remove the mouse listener to the top

  }

  I guess that's probably my logic for this part that's really let me down - I can make a similar function in actionscript 2, but am trying to learn actionscript 3 just to evolve with the times in some way and a little hard. Again, this is only a few days!

  function rotateLeft(e:Event):void {}

  {if(thisFrame==1)}

  gotoAndStop(viewer_mc.totalFrames-1);

  } else {}

  viewer_mc.prevFrame ();

  }

  }

  Any help you can give me would be welcome. For an example of the effect I'm trying to achieve with the auto play button etc. I recommend:

  http://www.fender.com/basses/precision-bass/American-standard-precision-bass

  Here is a link to the file that I made using your code with the change, I have indicated to play the opposite.  See if it works as expected.  If so, try to see what is different in your.  If not, tell me what to do, it does not reach.

  http://www.nedwebs.com/Flash/AS3_loop_play.fla

• Value of return in LOV not used on the first page visit

  I have a report at the Apex 3.2 based on a search of the P20_APP selection list field with an LOV.
  
  The first time I visit this page return the value of the LOV is empty, but I don't see the display value. I can also see it in debug mode:
  
  «0.03: binding: ": P20_APP"= "P20_APP" value = "»
  0.03:... Session state: Save "P20_APP" - registration of same value:
  
  
  If I change the value in the list once, the return value is set, e.g.:
  
  0.07: binding: ": P20_APP"= "P20_APP" value = "0" '.
  0.07:... Session state: Save "P20_APP" - registration of same value: "0".
  
  
  So, how to get the return value the first time that I come to the page? My report is executed immediately with the first value from the LOV when you access the page. Since there is no value, the output is incorrect.
  
  Thank you.
  
  Published by: Ino Laurensse on July 28, 2009 16:02

  Hello

  You can set a default value in the attributes of the element. Simply click on the element in the application builder page and scroll down until you see by default. You can specify it in a number of ways, defined by a menu drop-down.

  See you soon

  Ben
  http://www.munkyben.WordPress.com
  Don't forget to mark the answers useful or correct ;)

• Built in Flash Video and will NOT display in the hosted environment

  Built in Flash Video and will NOT display in the hosted environment. The files generated: work on the development computer. I posted the same files in the hosted environment and flash are not displayed. I first thought it was Vista 64 IE 7 so I switched to IE7 XP and the same results. Yet, it is strange that the falsh works locally. I'm sure it's something simple I'm missing. Any help would be appreciated. Thank you.
  
  Stan

  What files download you?

• Prospective Golf Sports simulation mode full-screen on one monitor, but when it runs the mouse would not return to the other monitor.

  original title: two monitors, mouse stuck
  I'm under Simulation of Golf Sports prospective mode full-screen on one monitor, but when it runs the mouse will not return to the other monitor. It seems that the mouse is not bound by the program, but I want to be able to use another application on the other monitor. Any suggestions?

  Hello

   
  What operating system is installed on the computer?
   
  Method 1: You can press the Windows key on the keyboard that appears in the start window and your mouse will automatically gets shifted to the main monitor.
   
  Method 2:
  (a) click Start, type change the mouse settings.
  (b) go to the pointer Options tab of
  (c) uncheck Display pointer trails
  (d) click apply and OK.
   
  Method 3: See if he has all the parameters of the Simulation of Golf to release the mouse button.
   
  If the methods above do not help, you can contact the Golf Simulation for additional help.
   

• do not focus on the first field?

  I have a vertical field Manager (MA). At the bottom of MY, there is a horizontal field Manager (MB) that contains three fields of image. MY contains also some other areas beyond Mo. When the cursor moves to the MB from the top, the first image field always gets the focus.  I would like to focus on a different image inside MB field, according to field above MB wore before the development moving in MB.

  What would be a good way to do it?

  Thank you.

  One of the ways would be to substitute onFocus on the MB:

  protected void onFocus(int direction) {
    // put the code determining which field to focus here...
    final Field fieldToFocus = <...>;
  
    // ...then use it - notice the invokeLater, it's important!
    UiApplication.getUiApplication().invokeLater(new Runnable() {
      public void run() {
        fieldToFocus.setFocus();
      }
    });
  }
  

  Implement your own logic in determinimg that the field of focus first.

  There is a possibility that the focus obviously will be from the first field in your choice, but even if it does, the change will be fast. More likely, the visual indication will go straight to the field chosen by you. And if you add a NullField these three images before and after, there will not be any Visual "break" at all.

• Why when I put another image instead of the first image in tabletFirstTemplate logoImagePath it does not show in the browser.

  Mr President.

  If I want to change the image that I put first in the logoImagePath in tableFirstTemplate then this second image does not appear in the browser.

  But when I put the previous image that I put on the first time, this first image appear in the browser as usual.

  But any other image if I want to put in place the first image does not appear in the browser.

  It looks like bellows

  

  No reason for this behavior of the logoImagePath.

  Concerning

  Remove the deployment folder, restart the weblogic Jdeveloper/Integrated Server and try again.

  Refer

  Java ADF Webcenter UCM Weblogic SOA: ADF: clean your drs, SDM using Script file

  See you soon

  AJ

• Discover with function as datasource returns only the first line.

  Hello

  I created the following function to get the status of all the rules for the instances of SQL Server.

  The data type of the function output has been configured as 'List of SQLInstanceRuleStatuss', where SQLInstanceRuleStatuss is the custom type, I created in the same module.

  When I tested the function, it returns all instances of SQL Server with two other columns.

  But when I try to create a view with the Rows property that is configured to use the feature, it returns only the first line:

  sqlRules = new ArrayList();

  queryStatement = server. QueryService.createStatement ("(DBSS_Instance)");

  queryResult = server. QueryService.executeStatement (queryStatement);

  for (it in queryResult.topologyObjects)

  {

  sqlRule is functionHelper.createDataObject ("westjet_mark_dev:SQLInstanceRuleStatus", "none", "test");.

  sqlRule.instance = it;

  sqlRule.ruleName = 'test rule name';

  sqlRule.status = false;

  sqlRules.add (sqlRule);

  }

  Return sqlRules;

  Did I miss something?

  Thank you

  Mark

  Mark,

  I think I forgot something

  sqlRule=functionHelper.createDataObject("westjet_mark_dev:SQLInstanceRuleStatus","none","test");

  you create the test id

  change your line of

  sqlRule=functionHelper.createDataObject("westjet_mark_dev:SQLInstanceRuleStatus","none",null);

  This should allow the creation of a single object in your loop for

• I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D207 error code

  I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D error code

  update by downloading the files directly and then apply them:

  pre cc updates: http://www.adobe.com/downloads/updates/

  CC updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

  updates CC 2104: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

• Small Bug: Detection of people - O key does not return to the grid view

  Windows 7

  When I tap the O key, I will in face detection module.

  But when I hit the e key O once again, I do not return to the display of the grid.

  To do this, I have to click on this icon to return to the display of the grid.

  

  The grid view is always key G

• I can't download the cloud creativity I have not had passed the first step

  I can't download the cloud creativity I have not had passed the first step

  Its OK I understood the problem