Video files are grey when I try to place...

Similar Questions

• error message saying a .dll file is missing when I try to acess Mngr.vdmdbg task not found.

  I have uninstalled or deleted my Windows XP Pro VDMDBG.dll because I received error messages after

  I am now using the same IDE on this DIY PC like what I used to have XP Pro running. I ran an upgrade or r disc install to resign the drivers and at the same time you run some programs to uninstall some of the OLD drivers of the motherboard and temporary files, but I must have too deep because now, I have only this error message telling me that a .dll file is missing when I try to acess Mngr.vdmdbg task was not found. Reinstalling the application may fix this problem. Where can I go to download or difficulty this annoyance file or program? Thankx again! -Al

  Sounds messy.

  If you see a message like this:

  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called vdmdbg when the name of the file should really be called vdmdbg.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  PS Microsoft support engineers - "try running sfc/scannow and check if it helps" will not replace the missing vdmdbg.dll file because it is not what sfc/scannow does.  If you want to see an experiment to prove that, let me know because I have a ready-made.

• Hello! I get the message "File not found" when I try to access my photos

  Hello! I get the message "File not found" when I try to access my photos in lightroom, and I can't find my photos! I had cleaned up my Mac and deleted by mistake in a different location and now only a gray peak appears in LR, along cable message, file not found. I had saved the raw disk backup files, but it won't let me import into lightroom. (Alright will appear in the import box, but it won't let me even click on it to add. Help!

  In the grid, right-click on an image of 'missing', select 'go to the folder in the library.

  If the folder view does not resemble what you show Finder, right-click on a folder and select 'Show the parent' '; repeat if necessary.

  This will show you where LR thinks that the file was originally.

  You can try to put the images where they were, or place them go elsewhere and 'move' the file in LR.

• Error message: "the version of this file is not compatible with the version of Windows that you are using", when you try to run an old ms - based back program in Win-7 Ultimate 64 bit.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I get this message when you try to run an old MS-DOS - based program in Win-7 Ultimate 64-bit.

  "The version of this file is not compatible with the version of Windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I understand that I am under a 64 bit OS, but is it possible to get this program to run? I was wondering if anyone has tips :)

  Hi Bcopeland,

  Thanks for posting your question in the Microsoft Community.

  Based on the information, you are trying to install and use an old ms - dos program based in Windows-7 Ultimate 64-bit.

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  You can check the compatibility of the program with Windows 7, in the Compatibility Center.

  Compatibility Center

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  a. click right on the program.

  b. click Properties.

  c. click on the tab compatibility.

  d. Select run this program in compatibility mode and select Windows Vista or whatever to use the system, the program was executed successfully.

  Here is an article that gives you more information on this:

  Make older programs in this version of Windows

  If the problem persists, you can get in touch with the software vendor to see for the latest version of the program to use the same system of 64-bit Windows 7.

  Hope the helps of information.

  If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

• Video files (any type) when they are imported, will import the video and audio.

  Premiere Pro (Mac) CC

  3.4 Ghz i7 Quad Core

  750 G SSD

  2 GB NVidia graphics card

  32 MB of Ram

  Any file video, regardless of the codec, import into Premiere pro as an audio file.  I did the things suggested in other forums, such as replacement .mov file extension, I used intermediate codecs, prores422, codec .mov (HDV1080p30) among many others.

  Also, I can't import a video sequence that seems to have an alpha that are associated with channel.  The graphics with alpha channel were made by Adobe AE and work well in Final Cut Pro 10.1

  I need help, FCPX 10.1 is a nightmare and I have a weekly television show that needs to be done as soon as POSSIBLE.  Until now, the switch to first Pro CC disappeared not smoothly.  Any help would be appreciated.

  Thank you for your response.  I could get my hands on Technical Support and we determined that my first Pro CC installation was corrupted.  It's a simple solution to uninstall and reinstall the program.  Now, everything works fine.  To answer your question, when I imported any type of video file (I tried several types of different different video files and codecs) it would be important in audio.  The icon is Audio only, when I put the sequence on the Timeline, I couldn't put anything on the timeline of the video, only Audio was present.

• Some video files are not correctly synchronize when streamed on the wired ethernet connection for blu - ray player. His career 20-30 seconds of video.

  Occurs only on video files more recent as the old files are synced very well. I was told that I had to use the Plex serverbut that doesn't seem to work with home movies that I use here.

  Hi, kBob55555,

  See if solutions proposed in using these links.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Blu-ray-wont-play-movies/a5bf1f3f-33C4-4502-AE2E-42cbd8f9d341

  How to read blu - ray media in Windows 7

  http://www.brighthub.com/computing/Windows-platform/articles/79840.aspx

• The Gigashot A40FE mpg files are slow when played on PC

  I recently bought the A40FE and well recorded video playback on the LCD is perfect, when I copy on my XP PC, or play directly from the hard drive of the A40FE, all plays back to slow, jerky and it wasn't there a 'noise' around the objects being focused on.
  I formatted the drive, reset the camera, but still exactly the same. I tried on two other PCs, and when I navigate to the Gigashot, it blocks in terms of Windows Explorer. Tried to ImageMixer, foolishly, but it seems to get worse :(

  Am I missing something really stupid here?

  Hello

  The film is correctly displayed on the external LCD you but if you play it on your PC then the movie does not play correctly. Is this good?

  I think you should test some different players. Try the small free tool called VLC player.
  It plays most audio and video files and it s free!

  In addition I recommend installing some codec packs.
  I use the K-Lite Mega code pack that contains all the necessary video codecs.

  Install it and check the quality of reading...

• How can I prevent subfolders are deleted when I try to delete the parent folder which I did not have permission to delete?

  There is folder (I have a total control except "delete")

  There are some folders and files in A folder.
  When I try to delete the folder it said "access denied." That's what I wanted.
  But after having done this, when I check inside the notebook has, I saw subfolders and files have been deleted.
  How can I set the permissions to prevent this?
  (I also want to have the permission to delete subfolders or files in folder A when I'm in it. I just want to avoid file one himself from deletion)
  Thanks in advance...

  Hi fenarena,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• What types of video files are supported in Dreamweaver CC?

  I couldn't find an answer to any where in the Forum myself.

  Anyone know what kind of files video I should use when embedding?

  I tried .flv and .avi without success. But .mp4 works beautifully. Is .mp4, the only one that I can use?

  Thank you

  -Matthew

  The question is what video files you can use on the modern web?

  Forget the incorporation.

  MP4 has the broadest support of browsers and modern mobile devices.

  None of the additional plugins or other required software.

  Use the HTML5 tag

  If you use an earlier version, use this code.

  http://techslides.com/demos/sample-videos/small.MP4' type = "video/mp4" >

  If you don't see this, you are using a

  outdated browser that does not support

  the video tag.

  Nancy O.

• Some of my Outlook (hotmail) files are missing when you use Firefox

  When I use Firefox as my browser for my Hotmail e-mail account (Outlook), for the first time this afternoon, some of my personal folders in the left column are missing. But if I use another browser such as Google Chrome or IE9, the files are all there.
  The specific files that are missing are subfolders in the personal file, I created and named trip.
  How can I get them back so that I can continue to use Firefox?

  Therefore, I would appreciate your help.
  Thank you very much in anticipation

  Anthony

  Hi Anthony,.
  If you refresh the files Panel in Firefox or if you search for them, the folders appear actually?

  This occurs after you clear the cache and cookies? Mode or safe mode? Questions to troubleshoot Firefox in Safe Mode

  If you open the developer tools Web console, the folders appear in the html code of the page?

  If the problem persists, please file a bug in the webcompat.com where all the bugs of compatibility were studied.

• Satellite A100: some files are missing when copying DVD on the desktop

  Hello

  Suppose I have 1000 files on a DVD.
  I drag all these files in the desktop, all of a sudden I see this is 920 files.
  If some files are missing.

  What this may be?
  There are no errors. I don't think that something is wrong.
  I initially thought maybe hidden files are counted in the DVD, but not on the desktop?
  Maybe something on the desktop?

  Anyone have any ideas? I tried to put it on 'To see the hidden files' - it's a Toshiba A100.

  I just ran a scan antivirus on this file and it let's say 1500 files analyzed.
  Haha. Antivirus but probably scanned all etc. desktop.ini and Thumbs.db.
  .. And maybe Windows Vista now have those when you want to display the number of files?

• Satellite M70-131: video files are displayed in black

  Dear friend

  I have a problem on my labtop with a graphics card.
  When I display all the video files the graphics card is very bad display this file, I see (video file) black (not clear).
  How can I solve this problem?

  Please help me

  Hello

  This problem occurs only with video files?
  If Yes, then I guess we're all ok with the graphics card and drivers, but you need their pettiness.
  In my opinion, you need to install codecs.

  Check this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12068&MessageID=44047

• Multiple copies of photo are displayed when you try to copy an image

  woring with images in Microsoft.

  Whe work with my files of photos, when I click on one, it will start to copy and sometimes I have 10 or more of the same image.  I can't get rid of all of them.  I have just keepgetting more and more the same images.

  Whe work with my files of photos, when I click on one, it will start to copy and sometimes I have 10 or more of the same image.  I can't get rid of all of them.  I have just keepgetting more and more the same images.

  =================================
  Are named copies: copy of xxxx.jpg?

  This happens usually when you have several choices
  keeping your Ctrl or Shift keys. Accidentally dragging
  the Group and then releasing the mouse button
  is what creates copies.

  It is easier if you have your mouse to single click...
  Then, you can select a file with a mouse and you
  don't have to click.

  Don't you click right/remove unwanted copies?

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• File Association message when you try to run the Windows 7 upgrade

  I'm eager to start the download for Win7 upgrade of Vista. My Download Manager tells me it's done as a .iso file. When I try to start I get a message the file Association that frankly confuses me. What should I do to get the thing running? Thank you, John

  An ISO file is an image of the data on a CD/DVD and just cannot be enforced, it is meant to be extracted and burned to a disc and then is executed.

  However, Microsoft provides a tool to load this file on a USB after the converted into a bootable drive.

  Go to this site to read the guide and download the tool. You will need at least 4 GB USB key, all the data on it will be erased.

• some .ai files are empty when I am asked to "import PDFs."

  I bought a few images for the first time.

  The first worked well, I downloaded them, open in photoshop CC 2015.  A box appears titled 'format Rasterize EPS' and I chose OK and my image was opened.

  However, I bought a few others that when I try to open them after downloading a box pops up that says 'import pdf' (see below) and I can only select: 'page' and certain page options (see below).  No matter what I'm doing here, I get a blank page when I hit OK.

  I can't make a difference in these images, are both * AI extensions, etc.

  If all goes well, Miss me something simple.

  

  Folk thanks... means a lot! ;-)