whites in the data in the table using the formula node

Similar Questions

• SQL Loader loading data into two Tables using a single CSV file

  Dear all,

  I have a requirement where in I need to load the data into 2 tables using a simple csv file.

  So I wrote the following control file. But it loads only the first table and also there nothing in the debug log file.

  Please suggest how to achieve this.

  Examples of data

  Source_system_code,Record_type,Source_System_Vendor_number,$vendor_name,Vendor_site_code,Address_line1,Address_line2,Address_line3

  Victor, New, Ven001, Vinay, Vin001, abc, def, xyz

  Control file script

  ================

  OPTIONS (errors = 0, skip = 1)
  load data
  replace
  in the table1 table:
  fields ended by ',' optionally surrounded "" "
  (
  Char Source_system_code (1) POSITION "ltrim (rtrim (:Source_system_code)),"
  Record_type tank "ltrim (rtrim (:Record_type)),"
  Source_System_Vendor_number tank "ltrim (rtrim (:Source_System_Vendor_number)),"
  $vendor_name tank "ltrim (rtrim (:Vendor_name)),"
  )
  in the Table2 table
  1 = 1
  fields ended by ',' optionally surrounded "" "
  (
  $vendor_name tank "ltrim (rtrim (:Vendor_name)),"
  Vendor_site_code tank "ltrim (rtrim (:Vendor_site_code)),"
  Address_line1 tank "ltrim (rtrim (:Address_line1)),"
  Address_line2 tank "ltrim (rtrim (:Address_line2)),"
  Address_line3 tank "ltrim (rtrim (:Address_line3)).
  )

  the problem here is loading into a table, only the first. (Table 1)

  Please guide me.

  Thank you

  Kumar

  When you do not provide a starting position for the first field in table2, it starts with the following after a last referenced in table1 field, then it starts with vendor_site_code, instead of $vendor_name.  So what you need to do instead, is specify position (1) to the first field in table2 and use the fields to fill.  In addition, he dislikes when 1 = 1, and he didn't need anyway.  See the example including the corrected below control file.

  Scott@orcl12c > test.dat TYPE of HOST

  Source_system_code, Record_type, Source_System_Vendor_number, $vendor_name, Vendor_site_code, Address_line1, Address_line2, Address_line3

  Victor, New, Ven001, Vinay, Vin001, abc, def, xyz

  Scott@orcl12c > test.ctl TYPE of HOST

  OPTIONS (errors = 0, skip = 1)

  load data

  replace

  in the table1 table:

  fields ended by ',' optionally surrounded "" "

  (

  Char Source_system_code (1) POSITION "ltrim (rtrim (:Source_system_code)),"

  Record_type tank "ltrim (rtrim (:Record_type)),"

  Source_System_Vendor_number tank "ltrim (rtrim (:Source_System_Vendor_number)),"

  $vendor_name tank "ltrim (rtrim (:Vendor_name)).

  )

  in the Table2 table

  fields ended by ',' optionally surrounded "" "

  (

  source_system_code FILL (1) POSITION.

  record_type FILLING,

  source_system_vendor_number FILLING,

  $vendor_name tank "ltrim (rtrim (:Vendor_name)),"

  Vendor_site_code tank "ltrim (rtrim (:Vendor_site_code)),"

  Address_line1 tank "ltrim (rtrim (:Address_line1)),"

  Address_line2 tank "ltrim (rtrim (:Address_line2)),"

  Address_line3 tank "ltrim (rtrim (:Address_line3)).

  )

  Scott@orcl12c > CREATE TABLE table1:

  2 (Source_system_code VARCHAR2 (13),)

  3 Record_type VARCHAR2 (11),

  4 Source_System_Vendor_number VARCHAR2 (27),

  5 $vendor_name VARCHAR2 (11))

  6.

  Table created.

  Scott@orcl12c > CREATE TABLE table2

  2 ($vendor_name VARCHAR2 (11),)

  3 Vendor_site_code VARCHAR2 (16).

  4 Address_line1 VARCHAR2 (13),

  5 Address_line2 VARCHAR2 (13),

  Address_line3 6 VARCHAR2 (13))

  7.

  Table created.

  Scott@orcl12c > HOST SQLLDR scott/tiger CONTROL = test.ctl DATA = test.dat LOG = test.log

  SQL * Loader: release 12.1.0.1.0 - Production on Thu Mar 26 01:43:30 2015

  Copyright (c) 1982, 2013, Oracle and/or its affiliates.  All rights reserved.

  Path used: classics

  Commit the point reached - the number of logical records 1

  TABLE1 table:

  1 row loaded successfully.

  Table TABLE2:

  1 row loaded successfully.

  Check the log file:

  test.log

  For more information on the charge.

  Scott@orcl12c > SELECT * FROM table1

  2.

  RECORD_TYPE SOURCE_SYSTEM_VENDOR_NUMBER $VENDOR_NAME SOURCE_SYSTEM

  ------------- ----------- --------------------------- -----------

  Victor Ven001 new Vinay

  1 selected line.

  Scott@orcl12c > SELECT * FROM table2

  2.

  $VENDOR_NAME VENDOR_SITE_CODE ADDRESS_LINE1 ADDRESS_LINE2 ADDRESS_LINE3

  ----------- ---------------- ------------- ------------- -------------

  Vinay Vin001 abc def xyz

  1 selected line.

  Scott@orcl12c >

• using the formula node array index

  Hello

  I'm new to labview...

  I am creating a vi that takes a number n and out the primes from 0 to n (i.e. including 1).

  My approach to do, he uses a formula node, but I can't understand how the table index or for each number first output.

  It seems that my indexing algorithm works very well, but I'm just pushing it into the array as an element.

  It'll will be great if someone could take a look at my vi and give me a hint on how to index properly.

  Thank you

  AA

  your output should be a table and index first use [index]

  also you have to declare the index and Prime]

  

• Initialization of an array to match another size of array using the formula node.

  I want to get a few different pictures of the same length and constants in the formula node and output a table corresponding to their length after some minor calculations. Another post, I discovered that I can simply initialize the table as such:

  float pp [100];

  The problem is that I find myself with a much bigger picture than what I need. I want to do is something like:

  float [n] pp.;

  where n represents the entry of an array size in the form node or is something like:

  n = sizeOfDim(td0,0);    Here I use a table 1 d

  None of these methods seem to work. How do I initialize my picture 'pp' such that it matches the length of array 1 d of "td0?

  The more likely your initialization externally.  Create an entry named pp and wire td0 inside as well.  Now create an output with the pp even name and it will contain an array of the desired length.  Of course, this assumes that you want to edit all items in pp.  Otherwise, just use initialize the array to create a new table and feed in the length of td0, and whatever default value you want (ie. 0 or NaN).  The blank values will keep this value after the node of the formula.

• calculation using the formula node needs two clicks

  Hello

  I want to use this piece of code for a larger program. My goal is to take 10 values and calculate two values using a formula. I used the formula node as the calculation functions digital ordinary would be too heavy. If I click on save, it saves two values to a file.

  The problem that I am facing is that when I start the program, it works very well for the first time. The second time however, if I change the values, and then click on save, it still displays the previous values, or some altered values. I have to click on save twice to get the correct values. I don't understand the reason why this happens. Can anyone help?

  File attachment: Capture screen and VI.

  P.S. If the solution can help with the problem, I'm ready to change any part, but please, not irrelevant to suggestions on how to * improve my code *, because I've worked hard to make it work with another major project.

  I don't completely understand the description of your problem.  But I see two problems.

  1. the "Save" button actually belongs to the event that handles the record button.  And the case of the event should really be Jean-Claude Value Change of mouse down?

  2. your STOP at the bad mechanical action.  Since it happened so this just released, it is only true while you're pressing it.  It stops the upper loop, but can't stop low loop because your loop will also be waiting to save button to press.  Stop will always be false because you cannot press two buttons at the same time.

  Try to make your action to stop button to be changed when released.  You must return the button to false programmatically born of two loops.  In fact, it would be better to have a case of events for the stop button to stop the lower loop.

  I don't understand what you're trying to do in the upper loop.  You read a file as soon as possible, and it seems to be the same file that you create in the lower loop.  Why?

• How to publish data from a table using the form

  Oracle forms6i
  
  Hai All
  
  I have download the data to the table of forms...
  
  My table T1 columns are in, out, intrinsically, introut, empname, empno
  
  
  and another table T2 consist of three columns is empno, date, time
  
  In table T2 time fields consist of symbol I, o... I mean IN, O OUT
  
  My Question is when an employee consist of 3 I - the three IN the time
  
  
  0815 I, 1200 I, 1415 I and OUT 3 times O 1245, 1445 O, O 1715 and empno is 001
  
  If there is no record for empno 001 then insert first 0815 I in table T1 in column IN time then
  
  to update 1200 intrinsically and 1245 update to Introut and 1415 up-to-date addin and 1445 to update addout
  
  
  Finally in 1715 to outtime
  
  If it is possible to do without Hardcoding the moment Pls tell with some good example
  
  
  Thanks in advance
  
  Srikkanth.M

  There now things are clear... whenever I have free I'll post the code u how to do this...

  for now, a few tips can help u

  -create the table to store operations travel so then u can't fix your code

  -Create the cursor on the T1 line through all the records.

  -Control what empno and action i.e. the current cursor (I or O) exists on the same date in T2 or not

  -otherwise exists insert a new record check also the SHIFT is coming in time IF is between MAJ 0815 and 1645 and action is 'I' then insert record and column values accordingly

  s ' there is, then update the record of the place where empno = cur.empno and attendance_date = mydate;

  It may be useful

  Baig,
  [My Oracle Blog | http://baigsorcl.blogspot.com/]

• Sorting table 2D using the formula node

  Hello

  • What l am trying to do is kind of numbers in groups.
  • A group consists of the numbers that are equal, or step upwards or downwards by a single value. Each group must be assigned to a column. E.g. O column of the table of entry test would consist of 5, 4 and 3, but not the 9 and 10. These values belong to column 1. However if the adjacent cell in the column was not empty then 9 and 10 would stay in column 0
  1. To better understand the programming formula node went to 1 d. I found that each cell is not treated individually with my code.
  • The final table of the orange entry test is that the data type l want to sort a 2D picture that ends up the same size chart.
  • In the code l provided my goal to compare each cell of each column line to determine if a cell is equal for example a = b, a + 1 = b or a-1 = b If Yes, then these values are in the right column. If this is not the case, a sort must be made to put a value in the right column it is.

  This is my first shot with node formula and l must admit others examples l found a bit confusing how a result has been obtained. I prefer to do any programming in labview instead of going to another program for results l am after. I tried to picture of programming just for this problem and found to grow big and very complicated then stopped l. For me the road to node formula should be simpler and more compact. My last resort is to use Excel but l still hope to do all the programming in Labview l you end up with a more dynamic program.

  Concerning

  Michael

  Hello

  You are brilliant... bloody!

  I just couldn't she would repeatedly using tables, l have been on it for weeks. I never thought about how you solved this problem.

  I hate excel and text. I am graphically spirit therefore l such as labview.

  I had a solution in Excel yesterday, but your solution is much better than what l came with

  I'm very grateful

  Thank you

  Michael

• Change the way the date is displayed by using a formula

  I have a standard date field in the format: dd/mm/yyyy
  
  What I want to do is to use a formula to display "dd", is there an easy way to do this?
  
  Thank you.

  You can use DAYOFMONTH (>) function

• How can I increment the index of a table in a formula node?

  Hello

  I need assistance with the node of the formula. I need a table, which increments each iteration of the code in the node of the formula. I need to save the amplitudes.

  I thought I could do it with i ++; I is the variable for my index.

  Martin

  Hi Martin,

  Why don't you use the node formula for it?

  Mike

• Redirect data to another table using before insert trigger.

  Dear all,
  How can I redirect the data to another table in a before Insert trigger? My database is Oracle10g.
  I have a table EMP (EMP_ID, LAST_NAME, SALARY).
  I have another EMP_COPY table with the same structure. I also have a before Insert trigger on the EMP table.
  Based on a condition that I have to redirect the data in table EMP_COPY. Let's say the condition is EMP_ID = 100.
  I fire an insert on EMP table for example INSERT IN EMP(EMP_ID,LAST_NAME,SALARY) VALUES(100,'Dev',500).
  On the inside of the front Insert trigger on the EMP table, I have the code
  IF EMP_ID = 100 THEN
  INSERT INTO EMP_COPY (EMP_ID, LAST_NAME, SALARY)
  VALUES(:NEW.) EMP_ID,: NEW. LAST_NAME,: NEW. SALARY);
  COMMIT;
  ON THE OTHER
  NULL;
  END IF;
  But the problem here is that data goes to EMP table of origin also although I don't want. He should do an Insert into EMP table only if EMP_ID! = 100.
  
  One way has been to raise a user-defined exception inside the If statement and not handle it so that the original insert on table EMP fails but INSERT comes in the EMP_COPY table. But in this solution since the inside the trigger unhandled exception, it propagates to the calling environment. And I can't stand outside relaxation as the calling environment is a form of Oracle Apps standard that cannot be customized.
  
  Any kind of help will be highly appreciated that I am fighting for more than two weeks.
  
  Thanks in advance
  Dev

  Remove the autonomous transaction pragma... and then try again.

• Outputs not used in the formula node

  Hello

  To clean up my code and avoid repeated calculations, I want to use intermediate variables in my code formula node. To create those variables, the only way I know is to create an output variable of the node, which of course eventually unused. Y at - it no problem/inneficiency created by doing this?

  Thank you

  Define a variable inside the node form. Use the syntax of C

  Mike...

• Pass the array to the formula node Eval (any chance to avoid this?)

  Hello

  I have not installed on my PC of MATLAB.

  I need to be able to say from the entry Panel custom formula "y = sin(Fm*2*pi*t[i]) + 2 * sin(3*Fm*2*pi*t[i]) + 3 * sin(4*Fm*2*pi*t[i])..."

  This form may contain a variable of harmonics (sine or cosine functions), but strict number of input parameters: Fm, t [i].

  FM - is a frequency.

  [i] t - is a time (ramp model) which is a table

  Can I pass array as a parameter of t [i] entry in formula node? How to do what other parameters, which are constants?

  Is there another method how to implement this - using the variable functions count?

  You are still far too complicated and it's still not scalable for a variable number of terms. You must be able to get out of math based text and think in terms of real LabVIEW.

  Here's a quick example using the terms in your first post (I show only a picture, because I have more LabVIEW 7.1).

  Modify if needed.

  

  NOTE:

  If you have more than a couple of terms generally, I tenacious feel that it would be simpler to configure a table complex stick (with the desired amplitude and frequency positions) and do an inverse FFT on this.

• Look to the top of table or a formula node?

  Hi all

  I'm doing a measurement of the temperature at the moment, and I use Labview to receive data from meaured a microcontroller. However, the measured data are tension, so I want to convert temperature. To do this, I have two ways, the first is to insert a node form, while the other one is to build a lookup table. But I don't know which is better in terms of speed.

  If you make a table of choice, I would have about 70000 data, which makes this very large table. I don't know if that's okay?  If the insertion of a formula, the relationship between the voltage and the temperature is very non-linear, I fear, it will also take a long time to calculate. While one is better? Please give me some advice or instructions. Thank you in advance.

  Moreover, to do a look up table, I tried to use the scale and mapping.vi. I wanted to define a table interpolated to do the job, but I don't know how to insert my lookup table in the subvi. Could someone tell me?

  
  

• How dynamically load data in target tables using as source files

  Hello
  
  My script needs a single interface to load data from 5 different files in five paintings of target using a single interface. All target tables have the same structure. It is possible to point to files variable source using ODI. But the same approach does not work with database tables. I get errors trying to make my table as dynamic target/source.
  
  Can anyone suggest anything. The last option would write a dynamic PL/SQL block in the KM. Other friends of suggestions?
  
  Kind regards
  Jay

  and not exists)
  Select 'X '.
  h. #PLAYGROUND. "v_tab_name"T ".

  have you provided the name of the resource with the quotes, if so please remove it and try.

  If you have provided the name of the variable, a v_tab_name and do not provide quotes. Can you please change the name of the variable to the capital, namely V_TAB_NAME and use the same in the data store too and please try again.

• TreeView: Line white between the two nodes are not appear

  Hi all

  I added a treeview control in my dialog plugin for InDesign CS3 and CS4.

  In CS4, it works fine but in CS3, I get a strange question.

  Question: A blank line between two nodes may not appear. See the image below

  I am referring to the white line which we can see in the InDesign paragraph style palette / all indesign sample as the Board treeview as shown below

  I tried this problem but has not found a solution

  Please help me solve this problem.

  Kind regards

  Alam

  I had a similar problem, but in the end, I couldn't figure how to remove the white lines.

  I have given up trying to remove the white and just changed the color of the treeview and everything that was drawn on the top in white.

  It was the only way I managed to hide lines.