Video is not working and cannot share the screen

Similar Questions

• Windows Control Panel has stopped working and cannot read the CD

  Original title: windows control panel has stopped working

  When I went to install my Rosetta Stone program it showed Windows has stopped working and then installed the program and when I put the cd in my computer saids windows control panel has stopped working and cannot read the cd

  Hello

  You say "Control Panel has stopped working" or "Windows Explorer has stopped working"?

  Follow the steps mentioned in the article below and check if that helps:

  Start the computer in a clean boot state

  Start your computer in a clean boot state, and check if your computer is able to read the CD. Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Seagate installs but I can not find and cannot open the unit to see my files

  whenever I installed my seagate freeagent go drive.. initio default controller is the one that pops up saying ready for use, but I can not find and cannot open the unit to see my files, I can see it as (which I think it's maybe) in devices, printers as 'Initro Default Controller.

  The disc may need a drive letter must be attributed. Please try the following link to assign a drive letter to the drive.

  http://Windows.Microsoft.com/en-in/Windows7/change-add-or-remove-a-drive-letter

• Does anyone know any reason why my photoshop 3D CC does not work. Cannot highlight the functions, as are gray. I Lion 10.7.5 but all other functions seem to work. ?

  Does anyone know any reason why my photoshop 3D CC does not work. Cannot highlight the functions, as are gray. I Lion 10.7.5 but all other functions seem to work. ?

  upgrade your operating system, Photoshop system requirements

• Windows Installer does not work, and niether do the Windows updates.

  OK, so I recently installed Advanced System Care for a purchase price of 12.28.  After the installation he did in fact speed up my computer but now I cannot make the updates for windows update and I access windows install.  I went through the solutions on "windows setup will not work", and nothing works.  Help, please.

  Alissa.

  Hey alissa,.

  Disable Advanced System Care and see if the update works. If this works, contact the software provider for help on how to make it work with updates.

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem. Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Camera does not work after you reduce the screen brightness

  Hello

  I have an application that uses the camera in QML. It works fine, but if the screen fades while my application is open the camera no longer until I restart the application.

  Here is the page of qml any camera:

  import bb.cascades 1.0
  import bb.cascades.multimedia 1.0
  
  /**
   * Most of this code was copied from:
   * https://developer.blackberry.com/cascades/documentation/design/camera/taking_a_photo_with_the_front_...
   */
  
  Page {
      property string pictureLocation: ""
      function closeCamera() {
          createReportNavigationPane.cameraClosed(pictureLocation)
          pictureLocation = "";
          saveID.enabled = false;
          sheetCamera.close();
      }
      titleBar: TitleBar {
          acceptAction: ActionItem {
              title: qsTr("Save")
              id: saveID
              enabled: false
              //title: "Save"
              onTriggered: {
                  closeCamera();
              }
          }
  
          // The 'Cancel' action
          dismissAction: ActionItem {
              title: "Cancel"
              onTriggered: {
                  pictureLocation = "";
                  closeCamera();
              }
          }
      }
      onCreationCompleted: {
          // Check to see if any cameras are currently accessible.
          if (camera.allCamerasAccessible) {
              // Open the rear camera.
              camera.open(CameraUnit.Rear);
              camera.isOpen = true
          }
      }
      Container {
          layout: DockLayout {
          }
  
          // The Camera object.
          Camera {
              id: camera
              preferredWidth: 768
              preferredHeight: 1280
              objectName: "camera"
              property bool photoBeingTaken
              property bool isOpen: false
              onTouch: {
                  if (event.isDown()) {
                      if (photoBeingTaken == false) {
  
                          // Take a photo, and automatically
                          // save it to the file system.
                          camera.capturePhoto();
                      }
                  }
              }
  
              // The following are examples of slots that can
              // be used with the Camera object to handle
              // the various signals that are emitted.
              onCameraOpened: {
                  // Once the camera is open, start the viewfinder.
                  camera.startViewfinder();
              }
              onCameraOpenFailed: {
                  console.debug("Camera cannot open");
              }
              onViewfinderStarted: {
                  console.debug("Viewfinder has been started");
                  photoBeingTaken = false;
              }
              onViewfinderStartFailed: {
                  console.debug("Viewfinder could not be started");
              }
              onPhotoCaptureFailed: {
                  console.debug("Photo could not be taken");
                  photoBeingTaken = false;
              }
              onPhotoSaveFailed: {
                  console.debug("Photo could not be saved");
                  photoBeingTaken = false;
              }
              onPhotoSaved: {
                  saveID.enabled = true;
                  photoBeingTaken = true;
                  console.debug("Photo has been successfully saved");
                  photoBeingTaken = false;
                  console.log(fileName);
                  pictureLocation = fileName;
                  var imageName = pictureLocation.substring(pictureLocation.lastIndexOf("/") + 1);
                  var imagePath = "/accounts/1000/shared/camera/" + imageName;
                  cameraPreview.imageSource = app.getCameraPreview(imageName, imagePath);
              }
          }
          Container {
              layout: StackLayout {
              }
              leftPadding: 10.0
              topPadding: 10.0
              Container {
                  preferredHeight: 200
                  preferredWidth: 200
                  horizontalAlignment: HorizontalAlignment.Left
                  Container {
                      verticalAlignment: VerticalAlignment.Center
                      ImageView {
                          id: cameraPreview
                          verticalAlignment: VerticalAlignment.Fill
                          horizontalAlignment: HorizontalAlignment.Fill
                          scalingMethod: ScalingMethod.Fill
                      }
                  }
              }
          }
      }
  }
  

  Thank you

  Gerry

  so, there is a signal of cameraResourceReleased which you can listen to that will tell you that the camera has been arrested.

  After that, you can restart the viewfinder after your application is in the foreground.

  We have a corner case that we are still working on what centers around the case when the screen starts to close (causing the camera to stop), but the user he wakes up before the browser tells your application in the background.  In this case, you may not receive a leading event.  You can probably work around this case by launching a timer and check, after a second or two, if the application has been deleted original or not... If it is still in the foreground, then you could try restart the viewfinder

  See you soon,.

  Sean

• What should I do if the wireless radio does not work and cannot connect to the wireless router?

  What should I do if, during the installation of my c309a Photosmart Premium printer all in one, which I am trying to install a wireless connection, I get an error message that the wireless radio is not working?

  Solved by turning the radio off and then on new wireless.

• I can find driver for my dvd writer dose not work Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) _ dvd writer ad - 7530 has ata thanks

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• I've set up a master password and for some reason its not recognize and cannot enter the e-mail and job site. I tried to delete it, but can not. Help

  I tried to take out additional coverage on the internet with a master password. Unfortunately what I typed to the origin is not excluded or recognized. This causes me a major problem due to one of the sites I use for work being blocked, as well as my original e-mail. How can I solve this problem? I tried to turn it off, but it requires the correct password and it does not work. Don't know what happened or if I typed a wrong typo. Can you help me on your end?

  PAM

  Firefox master password feature protects your saved passwords. However, even if you are unable to access your saved passwords, you should be able to connect to the site manually (by typing your user name and password). Is that somehow have blocked as well?

  If you have forgotten your master password, you can delete and create a new. However, I think that will also erase all your saved connections and you will save them again. More information on this: reset your master password if you forget.

  If the problem is not with the Firefox built-in password manager but another (add-on, the external program), then steps would be different, but they depend on what you use.

• My 8 Firefox Menu button does not work and neither does the right click in the window of firefox

  It seems that all drop-down buttons in the browser, including the bookmarks dropdown in the toolbar and the main menu button (firefox), no longer work. This happened after that I upgraded to firefox 8. I tried uninstalling and reinstalling several times all also the removal of the preferences user and all that but that does not work. But everything seems to work properly in safe mode. So I disabled all my addons in the normal mode, but cela still does not resolve the problem. My right click does not anywhere in the browser window either. And also, although the menus are not displayed, it seems that they are still there because if I click in the area that a the function button active, that's how I was able to disable addons.

  Safe mode disables extensions in Firefox 4 and later versions, and disables hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

• Satellite A300 - Wi - Fi does not work and cannot connect to networks

  I've had my laptop for 3 months. The wi fi and internet worked but I tried to use the cable home for the internet lan and wifi at the University, but it does not connect.
  I'm sure that I have not dropped the lap top. I took the laptop to check at a friends for wifi and without success.

  It's maybe something broken inside? Because I tried to connect to the network via a cable, but it does not find when it is supposed to.

  Please help :)

  > Wi fi and internet worked but I tried to use the cable home for the internet lan and wifi at the University, but it does not connect.
  > Because I tried to connect to the network via a cable, but it does not find when it is supposed to.
  Stand by. You only have this problem of connectivity with WIFI (wireless) or with LAN (cable) too?

• internal microphone does not work and cannot use a voice recording or Skype or any program that needs a mic

  Original title: his record game

  My internal microphone does not have all said that it is perfect, but I can't use Skype, a voice recording or any program that requires a microphone, so it seems that if my computer doesn´t have a microphone and I should have a digital array microphone. I have a hp pavilion dv7 beats edition

  Hello

  (1) what version of the Windows operating system is installed on your computer?

  (2) do you remember making the last changes made to the computer before this problem?

  You can try the following methods and check if it helps.
  Note: The following troubleshooting methods apply for the Windows 7 operating system.

  Method 1: Run of recording Audio troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  (a) click the Start button, type "MMSYS.» CPL"(sans les guillemets) in the area start search, and then press ENTER."

  (b) on the read tab, click on the speaker, is currently being used and click the Properties button.

  (c) switch to the tab Advanced ; Uncheck the option "allow applications to take exclusive instrument control."

  (d) if the enhancements tab is available, click it. Check "disable all sound effects'.»»

  (e) in the settings section, select none.

  (f) click apply , and then click OK.

  Method 3: Set the default Microphone
  Exercise the functions mentioned below to adjust the Microphone as default:
  a. go to Start and click on Control Panel .
  b. click on her, then a new window will open.
  (c) in the new window click on the recording tab. Right-click in the window and click Show Disabled devices.
  d. now check if the Microphone is listed there. Right-click on it and choose Activate.
  e. Select Microphone and click "set as default"

  Method 4: Update sound card drivers
  Try to update the latest drivers for your sound card and check if the problem persists.

  Please see this article for more information on the update of drivers. http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly

  For additional help, you can consult the following articles:

  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

   

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   

• Error code: n8156-6013, Netflix will not run and cannot remove the file mspr.hds saying he was in use.

  Original title: n8156-6013

  After the installation of new card motherboard and CPU - Netflix will not work. Got code error n8156-6013 - tried to delete the file mspr.hds - MS wouldn't let me delete the file - says it is in use. Windows Media Center is not running. What is the problem?

  Hello

  a. click Start, type services.msc in start search and press enter.

  b. Services, search for Windows Media Player Network Sharing Service, Windows Media Center Receiver Service, and Windows Media CenterScheduler Service.

  c. double click services and click the stop button, change to disabled startup type.

  d. restart the computer and see if you can remove the mspr.hds file.

  Once the problem is solved, back to services and start the services.

• Cannot use the set option in WMP, error: Media is not available and cannot access the server.

  Original title: W7 error play "Media is not available.

  On W7 Ultimate, I'm having a problem in the use of "play to" media action to my Sony TV. The tv is visible as a device and it is the same for the laptop to the TV. On laptop I get the error: "themedia is not available." Similarly, when I try to access the laptop to TV, I get error "can not access the server. any solution?

  What exact model Sony TV? You may need to install additional software
  See the content if you want to browse the content on the computer from the computer
  the TV. as to play to, see
  http://blogs.msdn.com/b/E7/archive/2009/05/12/media-streaming-with-Windows-7.aspx
  for beginners.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• computer does not work properly on startup, the screen is blank

  have any programs that run at startup, just a black (white)

  have any programs that run at startup, just a black (blank) screen and a cursor. also no taskbar

  A question = a Thread in a Forum to avoid confusion.

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/24e46b8e-E111-407E-898c-b0d288850964

  Answer in another Thread:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner