Satellite A300 - Wi - Fi does not work and cannot connect to networks

Similar Questions

• What should I do if the wireless radio does not work and cannot connect to the wireless router?

  What should I do if, during the installation of my c309a Photosmart Premium printer all in one, which I am trying to install a wireless connection, I get an error message that the wireless radio is not working?

  Solved by turning the radio off and then on new wireless.

• Satellite A300-233 webcam does not work and there is no driver available

  Hello

  I have a laptop Toshiba A300-233 and due to a problem of virus had to format my computer.
  I got most of the drivers, but I am not able to find the drivers for the camera anywhere.
  I have 32 bit Windows Vista OS.

  Please help because I can not use my camera. I tried other pilots, but they don't work either.

  We hope to hear from you soon.

  Thank you.

  Hi mate

  The A300-233 belongs to the PSAGCE series.
  The drivers for this series are on the European driver Toshiba page.
  http://EU.computers.Toshiba-Europe.com

  I found the driver for the webcam for Vista 32 bit it driver Webcam Chicony v 1.7.193.0508

• Satellite 200-170-keyboard does not work and the keyboard stops working

  My U200-170 2.5 years, I have the following problem:

  When after the start of the key is opperated the keyboard does not work and the keyboard no longer works (works until the button is pressed) connect a keyboard and a usb mouse. does not work because that device unknown. After Internet received external usb driver work ok. someone at - it an idea to solve this problem.

  Thank you

  AJAN

  Sounds like keyboard problem.
  The operating system uses the pilot to clean keyboard and generally it s not necessary to reinstall the special keyboard driver.
  But one thing is really strange; the yellow exclamation mark in Device Manager

  Eventually it s only a problem of software in such a case, a system restore can be useful...

  Have you checked if the keyboard works in the BIOS?
  Do this!

  If the keyboard does not work in the BIOS, then you will need to replace the internal keyboard with the new.

• Satellite A300-1NO - webcam does not work, but the LED lights

  Hello!

  I have a laptop Satellite A300-1NO, with Win 7 installed. My problem is that my webcam does not work always, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc... but sometimes I see a white or a black screen with a 'loading circle' in there. Blue is the LED light, I can see it in Device Manager too, but there is no picture, just 'loading '. I tried to uninstall the driver and then reinstall it, I installed the new "camera Assistant for Toshiba", without success.

  Is there any solution for this?

  > Is there any solution for this?
  I put t think there is solution for this. If I understand you right there is a problem with software pre-installed. It is not easy to say why this is happening.

  I have Satellite A300 too and use it with Win7 32 bit. Webcam works fine all the time.

  One more thing: have you noticed this problem in the first moments after installing Win7 or later?
  Have you installed something that may be the reason for this?

• Satellite A210-171: CD does not work and the WEIRD 19 error code

  Hello

  I tried to run a cd that came with my sony walkman but the cd does not work
  I went to Device Manager and noticed that there is a yellow triangle of information to the: TSSTcorp CDDVDW TS - L632H ATA Device

  It has a messege when I try to update the driver
  (Windows cannot start this hardware device because its information for configuration (in the registry) is incomplete or damaged (Code 19))

  Any suggestions please?
  Is there a free driver scan and repair maybe tool?

  Thanks in advance

  Post edited by: sounds

  Hello

  The solution is very simple;
  First of all, remove the drive from Device Manager CD/DVD.
  Then start the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that reboot the device, wait that the OS has acknowledged again the STRANGE and finally test.

• Satellite A300-V01 - webcam does not work with msn

  Hi all

  I was wondering if there was someone out there who could help me...

  I recently bought an A300/V01 and try to use the web camm for it, but whenever I open it on his own (not with msn or any other program), it freezes and will not work, and when I try to send my web cam on msn it tells me that there is no connected webcam.
  I'm pretty computer illiterate so iv tried to fix it myself but sadly failed.

  so, if there is someone out there who knows how to fix it would be great if you could help...

  Thanks xoxo

  Go to the Toshiba website and to update the camera/Webcam driver.

  Also try closing/leave the camera software help.

  You should also install Vista Service Pack 1 (SP1), if it is not installed.

  And to ensure that upgrade to the latest version of MSN Messenger.

• Satellite L650 - DVD player does not work and not visible in my computer

  Hello

  recently, I noticed that my dvd on my toshiba drive does not work.
  This isn't even apper in the 'My Computer' folder.
  And when I put a cd or dvd in the drive, it does nothing... Here is the screen of "My computer":

  http://img267.imageshack.us/img267/8458/31854306.jpg

  He had previously worked, but I don't use dvd for a long time player and when I tried yesterday it did not work...

  Hello

  You need to remove the upper and lower registry filters.
  But before doing so, please remove the CD/DVD drive in Device Manager.

  Then start the registry (regedit) and then remove the filters above and below this key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the laptop

  I think this should help you

  Good luck

• Satellite A300 - 1 2 does not work with 3 GB or 4 GB of memory

  Does not work with 3 GB or 4 GB of memory, only 2 GB!
  And if I plug a memory in bank1 2 GB module (bank0 is empty) - it's doesn't work too!

  He arrived with 3 laptops. (Sorry, my English is not good :))

  Have you thought about a fact that the phone doesn't support 3 GB or 4 GB of RAM?
  Isn't it?
  Maybe you should check the manual of the first user that is preinstalled on your laptop.

  I think you would find information very important.

  Equipped laptops Intel Mobile GL960 chipset is supported by the maximum memory capacity of 2 GB.
  As I m not wrong not your laptop was equipped with chipset Intel Mobile GL960 the case must therefore be clear now. or not?

  Also is important to know that you will need to use always first bank/slot memory (bank0) If you use a DEAD memory module!

  Good bye

  I think that you can assign 10 points ;)

• Satellite A300-1BZ - microphone does not work - need driver

  My microphone does not work & I can't find what kind it is to locate the pilot, can assits anybosy please?

  Hello

  The internal MIC is part of the webcam.
  Next to the sound driver, you will need to install the Chicony webcam software.

  You could test the microphone using the webcam software there is an option that allows you to record the audio stream

• Satellite A300 graphics card does not work

  Does not my graphics ati mobility radeon hd 3470, only the blue colour works on it and the display of the laptop is not working too, I need to plug a monitor so that I can work with it? Can I replace it? If so where can I buy a graphics card for?

  Hi paulik123,.

  If you also have a problem with an external monitor, there seems to be a problem with the internal graphics card
  Did you notice the same problem when you get into the BIOS?

  As Akuma writes you can contact a service provider authorized in your country. Guys are able to replace graphic card/motherboard for you.
  The list of aspic, you can find here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

• Satellite A300 FN + F5 does not work properly

  Hello
  I have a Satellite A300, PSAGCA-09U01N.

  I would like to connect a coard S-video from my laptop on my TV, and when I press FN + F5, I don't get the icons appear along the top of my screen _anymore_.
  I always get the plug S-video works, but going from normal setting (just laptop screen) by other modes ('laptop screen + TV' etc) is very slow. Can someone please.

  Hello

  Hmm... If the icons don't appear if you press a FN key you must reinstall Toshiba value added package if you use Vista or Windows 7. You can download it on the Toshiba driver download page:
  http://EU.computers.Toshiba-Europe.com

  Value added package controls the FN and enlightenment for example keys in order to check this!

• Satellite A300 - Chicony webcam does not work after upgrade to windows 7

  I'm frustrated so I came here to see if anyone knows a way to help solve this problem.

  I have a Toshiba Satellite A300, which came with Windows Vista 64 - bit pre-installed. After about a year or two to have the laptop, I decided to upgrade to Windows 7 64 bit. In the process, I believe that the driver of my webcam (Chicony usb 2.0 camera) has been eliminated.

  When I go into the Device Manager in the Control Panel, the webcam is not listed; nor is "imaging devices."

  I tried to download the driver manually, but I get an error message "Webcam open fail." Restart the computer or the camera. »

  My computer has registered my webcam as 'unknown device '.

  If anyone knows how to solve this problem, please, I beg you, let me know.

  > My computer has registered my webcam as 'unknown device '.
  > I tried to download the driver manually, but I get an error message "Webcam open fail." Restart the computer or the camera. »

  This means that the the webcam driver is not installed correctly.
  Visit the page of European driver of Toshiba and install the software/driver webcam just for this model of laptop.

  If the installation fails, restart the laptop and the tent.
  This should solve the problem.

• On Satellite A300-1MX webcam does not work properly

  After my windows Vista system crashed 16 December 2011, I had made recovery.
  After that, I have not found any driver for the webcam on the computer laptop everything. On the Toshiba support page, I finally found the 1.7 version, but this does not at all!

  He always appears: driver Webcam open fails, restart the computer or the camera. Since it's built in camera I tried with the restart of the computer, but which did not help at all. So I tried with the option to repair the driver with Install Shield Wizard. The program has done something, but without success.

  So I uninstalled and reinstalled and it did not help at all!

  Someone has an idea?

  Hello

  Found an article in the knowledge base of Toshiba which describes this error and provides a solution to this problem.
  + Why displays the error message: "Webcam driver open fail. Restart the computer or the camera. » ? +
  + http://aps2.toshiba-tro.de/kb0/OPT84026F0000R01.htm+

  But its related to Portege M600 and Satellite U300 only.
  However, you should also try to perform a BIOS update. After that, set the BIOS to default settings and save the changes. Then try to reinstall the software of webcam once more.

  You should also check the Device Manager. Here in Device Manager that the webcam should be recognized as a USB device, if this isn't the case, then it means that the webcam was not recognized by the OS and that means there could be a hardware problem

  As far as I know, the webcam is connected to the USB controller on the motherboard. If the cable connection is lost, then the webcam is not recognized in Device Manager; or as a USB device or an unknown device.

• Satellite A300-1MC - recovery does not work

  I have a Satellite A300-1MC. It does not start in windows is right there with the Welcome screen. PC diagnosis indicates that the hard drive is faulty. I replaced the hard drive with a MK3276GSX Toshiba MK3252GSX - both are 320 GB.

  When I insert the recovery disc I get the following message when disk 2 is running "insert the next recovery means that contains the D:\08008XSP6 file. STORMWATER MANAGEMENT.

  Any ideas where I'm going from here? »

  Hello

  Are you sure that you Recovery disk was created correctly?
  This recovery disk function properly in the past?

  You label the discs properly?

  It seems that there is a problem with the recovery disk.