Video 'share' - more high quality, for importation in ProTools?

Similar Questions

• slug on every page?  screen high quality for an article?

  Hello world!

  I'm working on a slug for CS3 using JavaScript.  I'm placing a piece of art from Illustrator as my art of slug.  I would like to see the slug on every page.  Is it possible to do without facing the slug together for each page?

  Also, is there a way to enable the display of high quality for this item only?

  Thank you!

  -Dave

  The exact syntax depends on whether or not you have pages in front. If this isn't the case, then it should do the job:

  mySlugArtFile = docRef.pages.item (0).appliedMaster.pages.item (0) concerned (' path: System: to: work: file: slug.) AI ', [baseX, baseY]);

  If you have pages in the face, you will need to put art on the two pages of the master.

  Dave

• More high resolution for GeForce 8400 M GS

  I have a HP Pavilion dv6700t CTO Special Edition laptop under Vista.  The laptop screen goes up to 1280 x 800.  What is the highest resolution that the NVIDIA GeForce 8400 m GS will rely on an external monitor?  Is there a HDMI port on the laptop.  Thank you

  Hello

  Specifications:

  Advanced display features

  • Output DVI Dual-link digital flat panel display resolutions up to 2560 x 1600
  • Double integrated RAMDAC 400 MHz for resolutions of analogue display up to and including 2048 x 1536 at 85 Hz
  • Integrated HDTV encoder offers TV-analog (component/Composite/S-video output) up to 1080i/1080 p resolution
  • NVIDIA nView® multi-display technology
  • the 10-bit display processing

  It works through HDMI port, so the average safetest is to use the FHD (1920 x 1080) monitor. Please read more discussion:

  https://forums.GeForce.com/default/topic/770494/GeForce-basics/HP-dv6700-CTO-with-NVIDIA-GeForce-8400m-GS-gt-what-monitor-/

  Kind regards.

• Lines/vector graphics are more high quality / sharp in 2015 of the Illustrator

  Hello

  I used to use CS5 and have now upgraded with a subscription to Adobe CC.

  These lines appear perfectly if I open them on the old computer with CS5, but they "break" here.  Screen attached.

  Anyone know if it's just a matter of display settings?  If so, how can I solve this problem.

  If I send this file to someone with an older version of Adobe CS, it seems to display perfectly for them.

  Notice the lower left and right corners below.  They appear smooth and connected in older versions of CS

  Thank you.

  GPU performance tuning.

  Click the 'Rocket' in the menu, uncheck the box.  Can also be found in the Preferences, 'GPU Settings' menu.

  OR...   Go to view, select 'GPU Preview' to change the CPU or vice versa.

  T

• My STR DN840 cannot hold a stream of high quality network

  My STR DN840 cannot hold a 320mbs network stream. The same router is attached to my TV 4K, and it streams HD content with no dropouts. The receiver is unable to maintain a stream of high quality for more than a few minutes. There is another technology of networking on the receiver?

  Continuously on my XBR65HX900A works fine most of the time. The problem is with streaming audio of high quality on the receiver of 840 DN STR. It is connected to my router via a switch that shares with the TV signal and which is in turn connected to my router via ethernet through current domestic. The speed is 8mps.

• The highest recording quality for Canon Vixia HF R500?

  What is the recording of high quality for Canon Vixia HF R500?

  Is it AVCHD 60 p 28 Mbps or 60 p 35 Mbps MP4?

  The MP4 format high sampling rate means that it is of a higher quality recording or not?

  Greg

  Hi Greg_Jay!

  Thank you for posting.

  The highest quality is MP4 60 p 35 Mbps.  As a general rule, the higher bit, better is the quality.

• Importing video to 2.7 K for a project of 1080; Not good quality

  I'm on FCP 10.1.4.   Mounting on a MBP running OS 10.9.5 15 ".

  I imported a few beautiful images of GoPro 2.7 K 60 fps (59,94 p).   When I play it in the Viewer on the upper right of the screen, it looks great.   Strong, bright color, smooth.

  I created a project of 30 fps (29.97 p) 1080.   I intend to export to this resolution that I find he dribbles well and seems very well on most of the big and small screens.  However...

  If I take a video from the browser and drag it to my project, the quality is seriously degraded.  When I play now the same clip of the project rather than the browser, now it is very soft, the colors are not as nice.  It just looks like another shit GoPro video and not the high quality that looks outside the project.

  I did not export it again, but the experience passed, my export to compressor bring the fidelity of the original.

  I am aware that I am down the video resolution and frame rate, however, I've seen a few videos 1080 and 720 even very crunchy, so I don't know why this happens.  I thought that if I gave the CPF in addition that he needs, he could extract something nice.

  Can I trust that compressor will clean as much as possible?

  Should move on to a project which is 2K or 60 frames per second (to match the max resolution of the image collection that I have.)?

  I don't know some of my images is only 720 p.

  Is there a setting of FCP to have spend more time has translated the video of the native resolution of the resolution of the project?

  Thanks for any help.  This poisoning me for awhile.  Web searches raise obvious answers to this question, so I was hoping someone here could help me.

  Encrassante the Viewer to a higher quality and make the project. Generally, I think, unless you intend to use the extra size to crop, most users edit in the original size and create a master of the size before the revision downward on export.

• Import a high quality video then suddenly decline in quality? [emergency]

  I've done a video no audio in Adobe Captivate, I do a project, while I recorded my audio on my iphone when I imported the video from adobe it lost QUALITY look this photo Imgur , you see on the right (low quality), on the left (high quality)

  What is the size of the image of the clip, and what is the sequence? As in both 1920 x 1080 or what? Also what is the frame rate of the clip and it is constant or variable rate (CFR).  If you are unsure you can download MediaInfo and drop a clip on it. Do a screengrab of the tree of this and post back here using the camera icon.

  Neil

• Loss of quality when importing video to the editor. What should I do?

  I did a HD video with my camera and need to change it, but when I import it into Adobe Premiere elements 13 quality decreases. How to maintain the optimal video quality when importing it?

  Arthurs

  What version of Premiere Elements and on what operating system works - it?

  What is the brand/model/parameters of the camera that records video? What is the file extension that is associated with the file? What is the bit rate of the file that is imported?

  Is the decline in quality import and when you watch the video in the Edit area monitor? Or do you see loss of video quality when you view this Timeline content export? When you view the video in edit box monitor, you're looking at timeline rendered or unreturned content? No coloured line, orange line or a green line on the content of the timeline?

  What you are (manually) or the draft definition (automatic) the project preset to match the properties of the video source? Please tell us what the readings are for the fashion edition of time base, image size and Pixel Aspect Ratio (even if the appearance of the gray fields) under Menu/change settings/general?

  Many more questions on dating on your video/graphics card version of the pilot and others, but let us examine and consider the foregoing and then decide what then.

  For any question or need clarification, please request so that we can customize a response for you.

  Thank you.

  RTA

• ATI radeon xpress 200 - a1350n - AmberineM-GL6E - share more memory video

  Hi guys my question is easy to explain... I guess the title says it all...

  .....

  I have an old PC HP a1350n that came from the factory with a card mother AmberineM-GL6E and ATI Radeon Xpress 200 as integrated video card.

  Well, my problem here.

  Like I said:

  HP Pavilion Media Center a1350n desktop PC

  AmberineM-GL6E< i="" guess="" is="" from="" asus="" i'm="" not="">

  BIOS version: 3.01< i="" remember="" that="" was="" the="" original="" verios="" of="" the="" bios="" before="" i="" upgraded="" to="">

  Video integrate Chip: ATI Radeon Xpress 200< actualy="" is="" at="" 64="" of="" memory="" shared="" with="" 1gb="">

  My problem is that now my PC has 2 GB of installed ram (2x1GB) and always has 64 MB shared memory...

  Before I updated the bios to 3.15 the option in the Bios that allows you to change the size of the memory could be changed, but now after the upgrade is not possible and with grey letters.

  How can I fix?

  http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=bph04502#N296

  It is a link that explains some of what I try to explain...

  Also... I have the same problem with another PC (a1450n), but this came with an nvidia chip...

  ... so no idea what can do? to share more memory for the video chip?

  Or should I get the BIOS? (where can I faund drop to do?)

  Note:

  I forgot to say, that in version 3.01, I could share to 256 MB and which was then my PC have had only 1 GB of RAM (2 x 512) which, in the case of the a1350n with radeon express 200

  But in the case of a1450n, I got 126MB with 512 MB of RAM (2 x 256) even at 3.01 version 3.11 BIOS... but now I can't do that... also the option disappeared o.0? WT@$%# !!!

  Unless you saved the BIOS ROM file before you upgrade maybe isn't you luck. Since you ask about it, you have not.

  The original BIOS is not available on the web portal of support for such an old desktop PC.

  You can, if you are willing to take the risk, go on the forums of mod BIOS to get a utility that can return this function to your option of the BIOS screen.  Forums Mod BIOS should have what you need.

• How to change the resolution of a photo in photoshop for high quality printing?

  I am confused about how to check the actual resolution of an image in Photoshop.

  I understand 72 DPI is set for the web and 300 DPI is normally required for high quality printing but how do you check the dpi in Photoshop. When you go to the size and resolution of the image, it is always in pixels (ppi)? Is it the same thing as the dots per inch?

  For example. If I open a photo in Photoshop and the resolution is 72 dpi can I change this at 300ppi so that's 300 DPI when it goes to print?

  Also is there a way to check the resolution of a picture that has been placed in indesign or illustrator without opening the image in photoshop?

  Thanks in advance

  You should check up to resample it for any nationally - or down.

  If you want to convert to CMYK, you must use the correct profile, the results may not be as expected.

  CMYK profiles are dependent on the device - the press is either calibrated to a known profile (which may be available in Photoshop), or he has a profile, which you would have to get the printer.

  If you want to print an Indesign document, the recommended workflow is to export to PDF and converting CMYK when the pdf file. The CMYK range is smaller than RGB, so unless you're aware of this, you will have a few surprises.

  You cannot print very saturated colors with CMYK and blues often come different looking than RGB.

  If you configure the Color PS with CMYK (workspace) profile settings, you can (work in RGB) press Ctrl + Y and get a glimpse of what will look like colors in CMYK. You can even edit in this mode, tweaking colors, but of course limited by the CMYK range.

  For all this to work and get good results, you must have a calibrated monitor, and it helps it of course to have a good printer, who knows what she's doing. And, if possible, be there during printing. Printing on an offset press is not like printing on your desktop printer - there are much more variable.

• I am not able to change the video quality for you tube. There are only two options 360 and Auto. Please help me.

  Hi I am experiencing strange problem for 15 to 20 days and I am not able to change the video quality for you tube. There are only two options 360 and Auto. Help me please if you can because I have a slow internet connection and I want to play video at 240, as it was before. Thanks in advance for your help.

  Could check you whether YouTube is to serve its HTML5 player or the player based on Flash? If you right click on the drive, short a context menu should appear. If the full Firefox context menu is displayed, press and release the ALT key to erase that. The last line of the menu short usually indicates which player he is.

  I'll assume HTML5 because...

  On Windows 7, Firefox should show a wide range of formats in the HTML5 player. However, if some of the features of media are disabled, preventing video MP4 decoding, then YouTube offers only 360 p (with WebM coding).

  If you have intentionally disabled Media Foundation and/or DirectShow in topic: config, then perhaps you would prefer to use the YouTube Flash Player? There are a few Add-ons that can force YouTube to serve you a Flash drive. Either of them will do, you don't need both:

  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-video-player/
  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-Player/

• My camera iPhone 5s is accessed remotely? Whenever I use my phone torch ends up taking videos. Is it possible for a person to access my camera through the torch. We share the same Apple ID

  My camera iPhone 5s is accessed remotely? Whenever I use my phone torch ends up taking videos. Is it possible for a person to access my camera through the torch. We share the same Apple ID

  N °

  but maybe you tap the camera icon (bottom-right) when you press the icon of the torch (with the other hand maybe?)

• More high def FLAC for Sandisk Clip Zip?

  Hello

  Just ordered a couple of Clip Zips. One will be for Gym/Running etc so will just MP3 dumped on it. But the other one will have a 32 GB sd card installed will put files of resolution more high for 'good' listening for flights, train travel etc.

  My files FLAC current are different bit depth and freq right up to 24 bit 192 kHz.

  What is higher that the device will be reliable supports.

  Thank you

  Zilaaballa wrote:

  Hello

  Just ordered a couple of Clip Zips. One will be for Gym/Running etc so will just MP3 dumped on it. But the other one will have a 32 GB sd card installed will put files of resolution more high for 'good' listening for flights, train travel etc.

  My files FLAC current are different bit depth and freq right up to 24 bit 192 kHz.

  What is higher that the device will be reliable supports.

  Thank you

  16 bit 44.1 kHz

• Import photos look pixelated. How can I get high quality? [was: Jeff Waters]

  I am producing a book and by inserting the digitised photographs.  The problem is that a lot of photos are pixelated as long as I can see them in "normal" mode.  Most, but not all are clear when I go to the 'presentation' view, but some come to ok, then a few seconds later, they become very grainy.   Here are my questions:

  1. all print ok regardless of the view?

  2. What is the best protocol to import?   I'm currently scanning at 1200 dpi, import in Lightroom where I edit, then export as tiff or jpeg with a resolution of 400 pixels per inch.

  How is quality, if you click with the right mouse click on an image and change the display quality.

  If you print, you should not print directly from InDesign, export to PDF and print from Acrobat.

  Important in InDesign is the effective resolution, normally of high quality, it comes to 300ppi, images are used in RGB with color profile, if transparency is included use psd, otherwise use a jpg with quality.