Videos captured in different rates can be combined on the same timeline?

Similar Questions

• Can be combined in the same script Get - VM and Get - view?

  Hello

  I am trying to find a way to combine these two Get - VM and Get - view in the same script.

  Script # 1

  Get-Cluster Management | Get - VM | Select Name,@{Name="HardwareVersion; Expression = {$_.} ExtensionData.Config.Version}}

  Script # 2

  Get-Cluster Management | Get - vm | where {$_.powerstate - don't "PoweredOff"} | % {get-view $_.id} | Select Name, @{Name = "ToolsVersion"; {Expression = {$_.config.tools.toolsVersion}}, @{Name = "ToolStatus"; Expression = {$_.} Guest.ToolsVersionStatus}}

  I've always had problems try this out and now, I need to combine them into a single script in figure.

  If you can help me or point me in the right direction would be great.

  Thank you

  Mike

  Curiosity got the best of me so I came with this. You had more correct, but you need to make a custom object so that the properties you are looking for can all be used simultaneously.

  It does not use the pipeline and uses a foreach loop.

  ----------------------------------------------------------------------------------------------

  $vms = get-Cluster Management | Get - VM? {$_.powerstate - don't "PoweredOff"}

  {foreach ($vm to $vms)

  $VMID = get-View ($vm.id)

  New-object psobject-property @ {}

  VM = $vm

  HardwareVersion = $vm. ExtensionData.Config.Version

  ToolsVersion = $VMID.config.tools.toolsVersion

  ToolsStatus = $VMID. Guest.ToolsVersionStatus

  } | Select the virtual machine, ToolsVersion, HardwareVersion, ToolsStatus

  }

  ----------------------------------------------------------------------------------------------

  Or use this option if you like the pipeline with Foreach-Object approach.

  ----------------------------------------------------------------------------------------------

  Get-Cluster Management | Get - VM? {$_.powerstate - don't "PoweredOff"} | % {

  $VMID = get-View ($_.id)

  New-object psobject-property @ {}

  VM = $_

  HardwareVersion = $_. ExtensionData.Config.Version

  ToolsVersion = $VMID.config.tools.toolsVersion

  ToolsStatus = $VMID. Guest.ToolsVersionStatus

  } | Select the virtual machine, ToolsVersion, HardwareVersion, ToolsStatus

  }

  ----------------------------------------------------------------------------------------------

  Both methods are correct that I can see. I tried both and both work well. You can easily piple only out to Export-Csv at the end of the select line. I hope this helps.

  Andrew

  Post edited by: andrewsardinha
  condition of powerstate added to each block operator and foreach-object script to the last script block.

• Photos and video can be combined in the same presentation

  I know this is a noob question. Just bought Elements 8 for the purposes of using video wedding HD to my son yesterday and pictures of amature coupled with music to show the wedding reception this weekend. They were married on a cruise ship. To mix the two, can do that?

  Of course they can! It is part of the fun.

  Remember - for best results (per the FAQ on the right of this forum) resizing your photos do not exceed 1000 x 750 pixels before putting them in a project.

  You can also look into keyframing and create paths (pans & zooms around the photo) something that can make even still pictures seem to be alive and moving.

• I have pictures in 5 different places, some, some not, how can I get to the same place

  I have pictures in 5 different places, some, some not, how can I get to the same place?

  Thanks for your help, but I'll just give up this. I'm not good on computers, can't do anything anyone advise.  / Thank you once again, Luella

  You learn how to do what all young as you are right now, or the other.  * smile *.

  It's not as if the issue is not going away.  Perhaps if you focused on ONE thing first - like find all the photos on your local computer or to save all photos to your account facebook or yahoo in a folder on your desktop - it seems so overwhelming to you.  All little by little.

  What you want to try first?

• Why is it I can't watch a video and listen to a radio station online at the same time?

  Using Windows Media Player, why can't I watch a video and listen to a radio station online at the same time? I have Windows 7 64-bit and 64-bit Windows Media Player, which works very well at any one task at a time. However, I'm missing something (which would not be the first time) or it is lacking in the multitasking features. For example, I have few video clips on my local PC, came a LAN webcam as an attachment in mp4 format. Normally, I can simply click on one of them in the e-mail (for example, Outlook), or after you save it as a file in a folder, and then the Media Player opens and he plays in a small video player window, because I associated with this type of file with Media Player. I also use the Media Player regularly to play music from an online internet radio station. In this case I simply open Media Player, click Media Guide, Internet Radio-click and choose one of the stations. When I do it, Media Player begins playing the music.

  However, the problem occurs when I want to watch one of these videos, while the music is already playing. If I click on one of the video files that I have used to do, the new media player immediately focus, but nothing else happens. The music that plays continues to play, but no video window opens, displaying the video.  Why not? It seems to me, on the one hand, that these two functions are quite disdinct and the small video window does not resemble the other interface on Media Player in which I select the station. In addition, in these videos there is no sound occurring, as if that might have inteferred with the sound of music. So, why I don't see videos of these files while listening to music?

  Hello

  Welcome to the Microsoft community.

  According to the description you want Windows media player to act as a multifunction program.

  I'm sorry to say that Windows media player is designed to play simple music or video at a time.

  Give us your comments for Windows 7:

  http://support.Microsoft.com/common/survey.aspx?scid=sw;en-us;2310&altStyle=MFE&renderOption=OverrideDefault&showPage=1&FR=1&nofrbrand=1

  Please post here if you have problems with Windows in the future.

• Two different language versions of Firefox at the same time?

  I am running Windows 7 Home Premium. I have two accounts, one for me and one for my wife. She uses Firefox (Japanese), and I've been using another browser. But I would like to firstly using Firefox (in English).

  Is it possible to run two different language versions of Firefox on the same computer? I want to be able to run both at the same time... (So if I navigate and she wants to check an auction quickly it can without my duty close my browser).

  Can be done with relative ease?

  Make sure that each of you has their own Firefox profile folder.

  See:

  • http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
  • http://KB.mozillazine.org/Shortcut_to_a_specific_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

  You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• Printing pictures, is possible to print different pictures on one page at the same time?

  When you print pictures, is it possible to print different pictures on one page at the same time? If this is not the case, the photo paper is lost because you can't get your full 4 prints if you do individually. There is a similar question on the change of the position of the image, that might work. However, the answer is not helpful at all.

  The following steps may be worth a try:

  In Windows Live Photo Gallery... Hold your Ctrl key
  and left click / Select the four pix you want to print...

  In your toolbar left click... Print... Print / Next...

  Now you should see the selection of the photo screen
  the photo printing wizard with the 4 pix selected.

  Left click... ... Left click... "Print options".
  and choose the Type of paper and quality parameters.

  Left click... Next... now you should be on the layout
  Screen.   Scroll and select... 3.5 x 5 cut
  prints cropped and rotation to fit.

  The 4 different pix should appear on the print template.

  Click next and your pix should start printing.

• How can I separate two movies on the same timeline?

  I use the first elements 11 but that you him have not used for quite awhile so I forgot much of what I learned. So here's my question: I have two movies on the same timeline. How can I separate them. In other words, how can I move one on the timeline, so it won't confuse my editing on the other? But better yet - how can I make a movie on the timeline completely and change it later as a separate film. I have really four shorts - a minute long. I would like to change separately, with a new file name. I don't know how to do that more.

  Tommyvincent

  I did some research on the issues that you have raised in this thread.

  Comments...

  1.

  After you import a video into the assets of the project, you can right click it, select Rename. This file when you drag the timeline will have the new name.

  But...

  If you import a video into the assets of the project, drag it to the timeline, right-click clip timeline, select Rename from the pop-up, then the calendar file will be renamed but not its thumbnail in the active project. You rename this project asset vignette to match if you want. However, these traces yet files renamed to the original with original filename to its disk hard saving location.

  2.

  All down your Timeline... one way would be to export the clip selectively if she was included in the Group of the clips on the Timeline. Two conditions for

  a. change box, set the gray tabs on the work area bar to expand on the segment to export

  and

  (b) in the field of export, have a check mark next to the option "Action work area Bar only.

  3.

  If you have made a clip in the active project, double clicked to open the preview window, you can cut the clip with the points put in and Set Out and create "subitems" with new names in the active project. These "subitems" would be part of the media of this project which could be moved to the timeline when necessary.

  Please review and determine if all the foregoing is in the right direction for what you want to do.

  Thank you.

  RTA

• How many people can work simultaneously on the same site of cc adobe muse?

  How many people can work simultaneously on the same site of cc adobe muse? I intend to create a national project in South Africa, which the Web site will be ideally worked on nine people in the same office. Each of these people will create pages on the same Web site for customers of one of the nine provinces. So I wonder if it is possible so to do, of course the intention is to purchase a multi-user of Adobe Muse CC nine computers license. Please help if you know the answer of the thw.

  Hello

  Take a look at this topic, it may be useful,

  How many users at different locations can access my site Web of Muse files to be updated?

• Account that a single email can be activated at the same time?

  Hello

  I have two e-mail accounts on the Mail for some time (virginmedia.com and outlook.com). Today, for some reason any Mail keeps asking for the password of the email blank and does not seem to recognize the password (which works fine if I connect on the Virgin account from the internet). Then also the following error message appears "only an e-mail account can be activated at the same time. «The «[email protected] e-mail account activation will disable "... @outlook.com" on this Mas.» How can I solve this?

  Thank you

  10.11.5 OS / iMac (mid-2010)

  You will need at least one of the accounts remove and recreate it in the Internet accounts preferences panel. You can do this without losing all the messages, provided that the account is IMAP or Exchange, and if you store sent messages on the server. Back up all data before making any changes.

• Several networks of power line can exist simultaneously in the same electrical circuit?

  Several networks of power line can exist simultaneously in the same electrical circuit?

  Thank you

  Yes, as long as you change the encryption keys can have simultaneous powerline of the networks.

  If two units with the encryption key "HomeplugAV" does not connect with two other units with the encryption key 'HomeplugAV2', but the two pairs will work independent of each other.

  Hope this helps

• When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  I work for a company that produces and transforms electric parts. We strive to get in remission at nine of the ECU, experiences, Instrument clusters etc. I'm trying to learn how to use LabVIEW to write commands and read the data on the CAN bus. I have downloaded the NI-CAN driver. I am currently 'play' with the same reception Port.VI show in the basic frame of the finder example API folder OR. I am not able to send the number in the data to write the table that it be read by the ncReadNet Mult .vi. When I put the parameter to 'Pending entries reading' the ncGetAttr.vi returns a 0 to indicate that there are no frames to read. As a result, the Mult.vi ncReadNet does not run.

  I don't have any connected equipment, I use the virtual CAN channel CAN256. Is this the reason why I can't get data frames in my queue for the Mult.vi ncReadNet to read?

  When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  CAN carry 256 and 257 are connected to eachother through software.  When you write about 256, you can read the data on 257 and vice versa.  I think the example you mention is a writing and reading on the same port, but what you want is to probably to make a copy of this VI, in order to run two at once, where it opens 256 and the other opens 257.  Then, when you write one that you will see on the other.  I think you might be able to use the test panel CAN too read an and use the example of the other.

• Question of curiosity: several versions of LabWindows CVI can be installed on the same PC?

  I'm curious.  Several versions of LabWindows CVI can be installed on the same PC?

  I'm used to LabVIEW, where Yes, it is possible.  However, with CVI, other than the additional support with newer versions, there may not be a problem to return to an earlier version.  I still wonder.  Several versions can coexist in the same PC?  Or they affect each other?

  Curious...

  R

  You can, BUT only one (the last) version of the CVI runtime will be installed - this behavior began with CVI 6 or more.  Before that date, you have completely installed parallel to several versions of the CVI.

  This can be a problem if you ever find that you have applications depend on a particular version of the RTE.  Theory of NI is that this editor is always backward compatible.

  And you might ask what is simply the RTE - the answer is that it is a set of DLLS and stuff that NEITHER really cares to list for you.

  Menchar

• How to apply different fonts to text (words) in the same field

  Please help, how to apply different fonts to text (words) in the same field. I want to select text and apply the font, size and color on the selected text in the field, this code below, the setFont method changes all the text in a field (message) of a select statement to the police. Help, please

          message = new AutoTextEditField("","",maxNumChars,editableStyle)
          {
              protected void layout(int width, int height)
              {
                  super.layout(width, height);
                  this.setExtent(550, 250);
              }
          };
          message.setBorder(border);
          message.setMargin(xyEdgeForMargin);
          message.setPadding(xyEdgeForPadding);
          message.setFont(_menuFont);
  

  Just write your edit as field

  SerializableAttribute public class RichEditField extends BasicEditFields

  {

  int [] offsets = null;

  Are police [] = null;

  String text = null;

  RichEditField (label As String, String text, int [] offsets, make police [])

  {

  Super (label, text);

  This.Text = Text;

  This.Label = Label;

  Offsets = this.offsets;

  This.font = do;

  Add validation for offsets and text here

  }

  RichEditField (label As String, String text)

  {

  Super (label, text);

  This.Text = Text;

  This.Label = Label;

  This.offsets = {0};

  This.font = {g.getDefaultFont ()};

  Add validation for offsets and text here

  }

  / * Here is a method to add customization of fonts as

  setFont (offset, length);

  setFont (offset);

  public void paint (Graphics g)

  {

  g, Clear ();

  for (int i = 0; i)<>

  {

  calculate it according to x, y using offset

  int length = 0;

  g.setFont (do [i]);

  If (i<>

  length = offset [i + 1] - offset [i];

  on the other

  Length = Text.length () - offset [i];

  g.drawText (text.substring (0, length), x, y);

  Super.Paint (g);

  }

  }

  This method is not compiled may have errors and may have many features according to your needs.

• When downloading to the sd card how can I stop downloading the same pictures?

  When you transfer the pictures from my card how can I stop downloading the same pictures again?

  You can delete old photos to the SD card in the device or the computer.  You can also choose the option to select only the images you want.

  Good luck.