videos of youtube for the lightbox widget

Similar Questions

• In the lightbox widget, how can I move a legend without moving the location of all legends?

  I use the lightbox widget for my wallet, and I downloaded the files of different layouts and directions. Some captions appear over my graphics. When I try to move the legend below the chart, it moves the location for all my captions. Edit together is not checked. What Miss me?

  Try the widget 'Presentation' under 'Compositions' but Yes - will not work with the lightbox.

• The application youtube for the ps vita is the source of many problems and all sorts of problems for me

  The application youtube for the ps vita is the source of many problems and all sorts of problems for me... the main issue he won't let me write reviews... Please solve this problem as soon as possible... Please.  I can't take more of this nonsense that youtube app gives me... and it's even for the ps vita... It's very annoying that I can't make comments... it just says: when I try cannot do this action or something... It has * ing me off and many others also. :'(

  Hello David,.

  As much as we would like to help you, our colleagues in Playstation is best placed to help out you. Discover their community at http://community.us.playstation.com/ or visit their Web site to support https://support.us.playstation.com/app/contact_options for more information on contacting them.

• How can I add a widget for the dashboard widget in Muse

  How can I add a widget for the dashboard widget in Muse? Please include steps.

  Only of the native widgets Muse go to the widgets Panel. For your own or 3rd party widgets are stored in your library panel. If you save your own just right click the element or widget on your page of muse. In options, select Save in the library.

• How how to videos from youtube for better play and not load all few seconds? The video clip load and only play for two seconds and starts charging again.

  I have a toshiba laptop satellite 655.

  I have a toshiba laptop satellite 655.

  Hello

  If a YouTube video is slow to the buffering, which is a network related issue and not a system issue. See the article on reading problems: http://support.google.com/youtube/bin/answer.py?hl=en&answer=74662

  Kind regards

  Patrick

• How to adjust the size composition for Tablet lightbox widget?

  Hello

  I recently built my first portfolio with muse site and now want to extend it to use Tablet and smartphone.

  I Don t know how to adjust the size of the composition however lightbox widget. I hope I Don t need it built again from scratch? This would mean to settle 23 slides, that I m not very keen on...: O all advice would be very appreciated!

  You can see the version of office here: http://www.movi.bz

  THX, Janne

  Click on the main content window until you see "Container" to the "selection indicator. You should also see resize handles around the container. Just use the handles to resize the container as you would anything else.

  Adobe help Muse | Working with Widgets

• Videos in front of the Lightbox Slideshow

  I have a Lightbox slideshow and videos on the same page.  I fixed the slide show to be at the front and the videos that I sent to the rear.  When I look in Google Chrome and open the Lightbox Slideshow it is fine and appears on top.  When I open it in IE or Firefox, the videos are on top.  How can I fix it?

  http://ogredexx.com/vids---pics.html is the web page.

  I tried to put videos on a master page, because everything on a master page appears on the back and he is always at the top.
  

  Sorry, my bad. Too many places where wmode needs to go in different contexts. The correct syntax should be:

• Using the Lightbox Widget, I can't (next) and buttons (Prev) appears in broswers except IE

  I'm using Lighbox Gallery Widget for my site and when I click the lightbox images, I can't get the (next) and the button (previous) appears in all of the following broswers... (Chrome, Opera, Foxfire), but they appear in Internet Explorer. Also the (close) button appears in each browser, so it's really shake me up. Here is a link to my page where I'm having the problem. Any help is very appreciated, I intend to launch the website in the coming weeks.

  http://www.luckielosers.com/build.php

  Thank you

  There is a problem with the location of the images. Look at the constructor

  The only images that can be found

  lightbox - blank.gif

  lightbox-ico - loading.gif

  lightbox-btn - close .gif

  I found the next key here images/lightbox/lightbox-btn-next.gif which is not what you have in the constructor - Thumbnail Widget Files/images/lightbox/lightbox-btn-next.gif

  OK that above and everything is fine.

  GRAMPS

  PS This is the answer to your MP

• Help! I can't change the search engine for the Firefox widget on my home screen

  OK, so my engine failure to research on FF for Android is Duckduckgo. It is also the only one I have in my list of search engines in FF settings. I also use the search widget FF on my homescreen for quick search. It is and has always been, Duckduckgo. But, all of a sudden after the recent update (I use the FF, 36 beta something), for my search widget on my home screen, switched to Google search engine! I don't know why... I never use it. But this applies only to the search engine for the FF search on my home screen widget, not when I'm looking for something in FF itself. Does anyone else have this problem? Because I can't find a way to change the search engine in the FF widget... Looked everywhere in search widget settings and in FF itself. Thanks for the help of any body!

  I found a way to implement back to DuckDuckGo after a bit of fiddling with the default search engine in the browser.

  I think that the update should have overridden the setting somehow. What you need to do is to any other search engine default, then set DuckDuckGo returned as default. This will also update engine of the widget's default search.

  I hope this helps.

• East of 128 MB of video RAM necessary for the performance of Vista

  I was looking at the Windows Vista box for the minimum run Vista and it says that 1 GB of RAM is required.  But another source indicates that the video card must have minimum video on 128 MB of RAM to run Vista?

  Hello

  It depends on the version of vista:

  "Supported graphics DirectX 9 with WDDM and 128 MB graphics memory (32 MB for the basic home edition)"

  Memory (RAM) RAM and video memory are 2 different things

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  RAM

  http://en.Wikipedia.org/wiki/random-access_memory

  Video memory

  http://en.Wikipedia.org/wiki/Video_memory

• TP, video call Cube for the Cube

  Hello world

  I need some advice,

  I have two side;

  First; CCM 6.1.5 + CTMS (Cisco telepresence Multipoint Switch) + Telepresence Cisco 3845 (c3845-adventerprisek9_ivs - mz.124 - 22.YB8.bin) of 1000 +.

  Second; CTMS + TP + CCM 8.5 1000 + 3945 (3900-universalk9-mz. Spa.150 - 1.M4.bin).

  I tried video call on the cube for the cube. I did some configs but will try tomorrow J.

  I need some answers:

  • 3845 router has not mpov, mpov it mandatory for cube calls?
  • 3845 router is it need license for cube?

  Here's the configs;

  3945 router config-

  voice, send rtp-received

  !

  voip phone service

  allow sip to sip connections

  Fax protocol t38 ls-redundancy hs 0-redundancy help 0 no

  SIP

  binding control source-interface GigabitEthernet0/0.21

  bind media source-interface GigabitEthernet0/0.21

  offer-early forced

  !

  voice class codec 1

  Aacld of preference profile 1 Codec 1

  Profile of h264 codec video 2

  !

  !

  interface GigabitEthernet0/0.21

  encapsulation dot1Q 21

  address IP CUBE3945 I_WANIP

  !

  !

  IP forward-Protocol ND

  !

  IP http server

  no ip http secure server

  !

  !

  !

  !

  aacld profile 1 codec

  fmtp "fmtp:96 profile-level-id = 16; streamtype = 5; mode = AAChbr; config = B98C00; sizeLength = 13; indexLength = 3; indexDeltaLength = 3; constantDuration = 480.

  !

  !

  Codec h264 profile 2

  fmtp "fmtp:112 profile-level-id = 4 d 0028; apors-parametersets = R00AKAmWUgDwBDyA, SGE7jyA =; radio-mode = 1.

  !

  !

  Dial-peer voice 1 voip

  Description to_CCM85

  service logon

  RTP payload type cisco-codec-fax-ind 110

  RTP payload type cisco-codec-aacld 96

  RTP payload type cisco-codec-video-h264 112

  session protocol sipv2

  session target ipv4: CCM85_IP

  incoming called number 10...

  codec voice-class 1

  DTMF-relay rtp - nte

  !

  Dial-peer voice 2 voip

  Description to_CCM615

  service logon

  destination-model 7...

  RTP payload type cisco-codec-fax-ind 110

  RTP payload type cisco-codec-aacld 96

  RTP payload type cisco-codec-video-h264 112

  session protocol sipv2

  session target ipv4: 3845cube_wanIp

  codec voice-class 1

  DTMF-relay rtp - nte

  !

  3845 router config-

  voip phone service

  media stream-autour

  allow sip to sip connections

  SIP

  binding control source-interface GigabitEthernet0/1.21

  bind media source-interface GigabitEthernet0/1.21

  offer-early forced

  !

  !

  !

  voice class codec 1

  Aacld of preference profile 1 Codec 1

  Profile of h264 codec video 2

  !

  !

  !

  interface GigabitEthernet0/1.21

  encapsulation dot1Q 21

  address IP CM6_wanIp

  !

  aacld profile 1 codec

  fmtp "fmtp:96 profile-level-id = 16; streamtype = 5; mode = AAChbr; config = B98C00; sizeLength = 13; indexLength = 3; indexDeltaLength = 3; constantDuration = 480.

  !

  Codec h264 profile 2

  fmtp "fmtp:112 profile-level-id = 4 d 0028; apors-parametersets = R00AKAmWUgDwBDyA, SGE7jyA =; radio-mode = 1.

  !

  !

  !

  Dial-peer voice 1 voip

  Description to_CM8

  service logon

  destination-model 10...

  RTP payload type cisco-codec-fax-ind 110

  RTP payload type cisco-codec-aacld 96

  RTP payload type cisco-codec-video-h264 112

  codec voice-class 1

  session protocol sipv2

  session target ipv4:3945_wanIp

  DTMF-relay rtp - nte

  !

  Dial-peer voice 2 voip

  Description to_CM6

  service logon

  RTP payload type cisco-codec-fax-ind 110

  RTP payload type cisco-codec-aacld 96

  RTP payload type cisco-codec-video-h264 112

  codec voice-class 1

  session protocol sipv2

  session target ipv4:CM6_IP

  incoming called-number 7...

  DTMF-relay rtp - nte

  !

  Best, thank you...

  Barris salvation,

  Try adding the following configuration:

  voip phone service
  RTP ssrc multiplex
  address - hide
  allow sip to sip connections
  SIP
  midcall-signalling passthru
  tcp transport session
  passage of Header error-passthru
  amp content sdp
  rel1xx disable

  Thank you

  Paul

• How to change the mouse setting to stop automatically by selecting a video on youtube when the pointer over video

  whenever I leave the pointer over a video for more than a few seconds without moving, it automatically selects the video and go to the page with the video ready to play

  Click the Start button and click Control Panel.

  Click ease of access Center,

  Then make the mouse easier to use,

  

• No option overlay for the ToolTip widget?

  It seems that there is no way to change order of overlap between different triggers and targets.

  I am trying to create a simple timeline in which I use the widget tool tip to reveal more info on historical figures. Triggers are the names of historical figures, and their areas of target text reveal more information about themselves on the passage of the mouse.

  The background screenshot shows the first person information popup box, but you will notice the problem with overlay - the popup is behind the trigger for the 2nd person. I looked in the layers panel - it allows me to rearrange the layers so that the target area is above the 2nd trigger. Is it possible to fix this?

  I don't want to make invisible triggers with the names and boxes of separate Visual elements (which could fix) - because they work together as buttons with different States.

  Help, please.

  Cobus

  

  In your properties of composition to ensure that "triggers on Top" is NOT checked.

  

• Question for the Menu Widget

  Hi, im currently wondering if its possible to customize the widget menu as follows:

  You see my designed header and words are for other page links. This is my goal. But I can't seem to 'disconnect' menu buttons single place wherever I want, they seem to stay together as seen under the heading. I tried to place only 4 widgets menu manual for my results, but they don't link to the pages when I saw in the browser.

  

  PS please excuse my im bad grammar of Germany

  Hi Bryan,.

  You must use the manual Menu, as you have, to be able to achieve this goal. You can bind the buttons on the menu for the desired pages. Select the menu button, go to the hyperlink at the top manager and bind with the desired page or URL.

  Kind regards

  Aish

• With the help of videos quick time (for the web)

  Hi guys,.
  
  In my project, I use quick time videos in director, which work very well at its publishing and reading in the projector. However when I export for the web, video replay in the web browser. Is there something I'm missing when exporting?
  
  Thank you very much
  
  Rich

  Your QT files are too large. The Member is set to listen to? You can
  monitor percentStreamed (place a #field on the screen and update each)
  frame with member("QT").percentStreamed)