VIENNA Data Protection license advanced for DR site

Similar Questions

• password data are listed for a site, but are not used for the connection

  After updating Firefox (for 36.0.1), listed saved passwords were not being inserted to connections site. After you delete all data saved password, there is no prompt to save the entered password data. I then deleted to recycle bin signons.sqlite, logins.json and signons3.txt, you exit Firefox and hard rebooted my desktop Windows 7 Pro 64-bit computer. Still no prompt to save password entered data. Remember passwords for websites has been checked in all of this, with several attempts to uncheck, OKing, close and restart Firefox, box, OKing, restart Firefox, you log in to a site.

  Another problem is the result of the last update. I can't get my homepage to show the startup of Firefox. The box on the general tab in the Options and the home page is entered. I tried to place the home page two ways: either by manually typing the url in the Options and the other by accessing the url and drag the tab to the Home icon and say yes to make this my home page.

  Ideas for resolution of these issues would be appreciated.

  Update:
  Just got the notice of upgrade to version 37.0.2. Installed upgrading and now no problems! Hope this will help others.

  There are several reasons for something like that. But if the browser
  is now working properly, just keep an eye out for the problem to come back.

• I need a culture customized for my site, I work with a minority language, and I need to have calendar dates in this language. Is this possible with a widget in Muse?

  I wonder if there is no way to do a culture customized for my site hosted with BC's domain? I work with a minority language, and I need to have calendar dates in this language.

  Is this possible with a widget in Muse? -to change my language in this particular calendar, t.i.: may is in my language, and Monday is my language

  This stuff is usually coded in the underlying JavaScript widget, derived from locale hard your computer or browser / language setting or gleaned from the respective server configuration information, so most likely, it can not be done, if not already covered by one of these methods. Hacking jQuery would of course always possible, but the other options are beyond your control, anyway.

  Mylenium

• Advanced vSphere Data Protection restore client connection fails

  Dear all,

  I have a problem with the Data Protection restore vSphere Client. Including the option advanced. If I use the option of database connection I can get to my saved VM and I can also restore a single file if I want to. If I want to use the advanced option (I don't want to install flash player on each server, thank you vmware!). Whenever I try to log in with my domain account and the account root POS I get the message "failed to connect vCenter username or incorrect password.

  I tried both with my domain account (which incidentally is a valid account, I can connect to POS with the vmware client). I know that the root account is good and the password as I can also connect to POS via the menu of the server vcenter5. I am also able to enter the configuration of POS with the root account. I've stopped and started services POS with the root account.

  I am at a loss. Someone has an idea?

  Credentials change requires a restart of the device and I saw the PW in a config file, so I think it's hardcoded.

  If you have changed, may be the cause of your problem.

• Configure the listener for the data protection

  Hello world
  
  I'm currently caveat of data (physical standby database) for my database. But I have problem to configure the listening port on both servers. Can someone give me some examples?
  
  Oracle: 10g R2
  Operating systems: Windows
  Database primary ken10g
  backup database: ken10gbk
  
  Here are the contents of my files current listener on both servers:
  
  Primary server:
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  (ADDRESS = (PROTOCOL = TCP) (HOST =)(PORT = 1521) Primary_server)
  )
  )
  
  Backup server:
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = standby_server) (PORT = 1521))
  )
  )
  
  Thanks in advance.
  
  Ken

  This should always work on Oracle 10.

  ---------------------------

  Main example

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/network/admin/listener.ora
  # Generated by Oracle configuration tools.

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = host) (PORT = 1521))
  )
  )

  SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PRIMARY)
  (ORACLE_HOME=/u01/app/oracle/product/11.2.0)
  (GLOBAL_DBNAME = PRIMARY_DGMGRL. Host)))

  ADR_BASE_LISTENER = / u01/app/oracle

  Example of Eve

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/network/admin/listener.ora
  # Generated by Oracle configuration tools.

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = host) (PORT = 1521))
  )
  )

  SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = STANDBY)
  (ORACLE_HOME = u01/app/oracle/product/11.2.0)
  (GLOBAL_DBNAME = STANDBY_DGMGRL. Host)))

  ADR_BASE_LISTENER = / u01/app/oracle

• I am facing some problems with the installation of data protection. Please see below for details

  We use the data protection in our project.  The research that I have done in protecting data, I realized that the FDM adds the data in protected intersections to load the file that is created by FDM via the import process. The problem is that there are actions given in HFM and I get an error that says: "error: load the file cannot contain action data according to user option." I'm pretty sure that some user option (it would be great if you have an idea where I can find this user option) prevents data already present of shares to be loaded via FDM. Have faced this kind of error before? Is there a work around on this?

  Thank you

  Rohit

  Hello

  The user option which is the origin of the problem is 'File Contains Data property'. You must make sure that this load option is enabled when you start loading in FDM process if the dataset that you present must contain data of shares.

  Kind regards

  Simon

• Firefox 13.0.1, Flash 11.3.300.262, no video for some sites

  Once firefox and flash set to upgrade to the latest versions, I found that I have no video for some sites in flash. YouTube works great but aren't sites like metacafe.com .

  I tried to roll back to firefox 13.0.0. I tried aso back flash 11.2 and 10.3 without result. I also tried to disable protected mode for flash, still no video. I did a complete reinstall of firefox (including deleting my profile data) and flash, but it still doesn't work.

  The only time where I get video is when I restart firefox in safe mode. However, when I reboot in normal mode with all the addons disabled I get no video. I have not install realplayer.

  Anyone got any ideas as to what I could try that I have not already?

  Try to "disable hardware acceleration" in the Flash Player.

  • http://helpx.Adobe.com/Flash-Player/KB/video-playback-issues.html

  See also:

  • https://support.Mozilla.org/KB/keep-Flash-up-to-date-and-troubleshoot-problems

  Blink the window "display settings":

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/help01.html

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

• License Manager for applications built in LabVIEW

  What I have is a licensing system to add to applications built in LabVIEW that works more or less like a volume, or as FlexLM license server, where a customer is allowed to so many instances/seats of a program.  Most of what I found looking around my own has been for licenses Add-ons for LabVIEW, which is not what I'm looking for (it's what makes third-party attribution license and activation tool box, for example).  I want it to work like saying the CAD program to work - we have X licenses to run SolidWorks, so when someone starts the program, it fist check with the license server to see if a license is available.  If so, the application opens, and then withdraw the license when the app is left.

  I found Protection PLUS 5 of SoftwareKey SDK.  It looks pretty good.  I like that they have a licensed server product that manages the whole "set up a license server" for me.  I think that some (or a lot) of work, this could be useful.

  The problem I have with the product is that it's a terrible LabVIEW library.  It is not to add to the palette of features anywhere.  Not one of the screws included have a description.  They don't follow things to standard LabVIEW style, like the error code from the lower left and the lower right (actually go in and out of the top middle).  They have an online site that lists what each command and how it works, but it's a pain to work looking back from a webpage to LabVIEW.  The only example they included is a little obtuse.

  So I guess I have two questions.  The first is, has anyone used 5 over Protection, and what did you think of him?  The second is, is there an another add-on which recommend you people?

  Oh, just remembered, but I don't know if it has this feature - http://sine.ni.com/nips/cds/view/p/lang/en/nid/211731

• Problems installing System Center Data Protection Manager 2010 in Server 2008 r2 DataCenter

  I try to install DPM 2010 and I installed all 4 of the installation of packages and they are all in the same folder according to the installation instructions on Microsoft Technet for DPM site 2010 and I clicked on the 1st package install and it unpacks the original installation package and it brings up the install window install data protection manager and clicked on install and I get the following error on the redistributable Visual C++ - Redistributable package Installation of Visual C++ has no... Run vcredist_x64.exe \redist\vcredist\ to install vcredist and re-run Setup.

  Whenever I tried to install the vcredist_x64.exe which was provided with the download I get the error that it cannot install, tht, there was an unexpected error.

  I downloaded the redistributable Microsoft and tried to install it, but the 2010 version is already installed and I could not install the version of 2008 on the 2010 version. I tried to download Visual C++ 2008 redistributable sp1 and installed correctly but when I come back and you try to install the System Center DPM 2010 setup.exe it always tries to go to the folder with the not redistributable sp1 provided with the download and it freezes in half way through even though the correct redist "is installed for server 2008 r2 x 64.

  Anyone got any suggestions? I've been searching and trying to figure out for hours and I don't see anything in the KB for DPM 2010 or technet.

  Hi osiguy,

  Since the problem is related to the Data Protection Manager, I suggest that you post your question in the following forum.

  Forum for Data Protection Manager

• Unable to access Internet Explorer after installing the Service Pack 3. Get the error of "Data Protection".

  Service Pack 3 problems

  Recently downloaded service pack 3 and cannot get into Internet Explorer 8 as 'Data Protection' will not allow.  Anyone know how to fix this?

  Hi Courtney,

  ·         Are you referring to Data Execution Prevention (DEP)?

  If so, check if turn off DEP support. To do this, follow these steps.

  a. click Start, click run, type sysdm.cpland then click OK.

  b. on the tab Advanced , under performance, click settings.

  c. on the Data Execution Prevention tab, use one of the following procedures:

  ·         Select the check box next to the program that you want to turn off DEP for and then click OK.

  ·         If the program is not in the list, click Add. Navigate to the folder Program Files , search for the executable file of the program (it will have the .exe extension) and then click Open.

  For more information on DEP, see the following article.

  A detailed description of the feature Data Execution Prevention (DEP) in Windows XP Service Pack 2, Microsoft Windows XP Tablet PC Edition 2005, and Windows Server 2003

• License model for BB10 apps in AppWorld

  On the BB dev site, I found the following:

  Applications running on the BlackBerry 10 operating system is the use of a static licensing model, regardless of the choice made in the licensing model in the supplier portal.

  This means that we don't need to bother about the licensing model for BB10 apps and let the App World which must manage the licesning Blackberry world mechanism?

  Fix. In BB 10 it is not possible for a user to save the app package and copy it to another device. Therefore, there is no chance of your app executable escaped a user and then on any other side loading on their device. It is protected in this way and the dynamics of license is not really necessary...

  But if you want extra protection, you can always do it within your application, but you have to manage your own licensing model in this case.

  Shadid

• Should what license I for 25 SSL VPN peers

  Hi all

  I want to implement cluster active / standby with a pair of ASAs 5550 and I have a licensing question. Here's the "sh - key retail activation" leave two output devices...

  ASA1:

  SH - activation in detail key:

  Serial number: XXXXX

  No temporary key assets.

  Activation key running: XXXXX XXXXX XXXXX XXXXX XXXXX

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 250

  Internal hosts: unlimited

  Failover: Active/active

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 2

  GTP/GPRS: disabled

  SSL VPN peers: 2

  Total of the VPN peers: 5000

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect Cisco VPN phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes an ASA 5550 VPN Premium license.

  Flash activation key is the SAME as the key running.

  ASA2:

  SH - activation in detail key:

  Serial number: XXXXX

  No temporary key assets.

  Activation key running: XXXXX XXXXX XXXXX XXXXX XXXXX

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 250

  Internal hosts: unlimited

  Failover: Active/active

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 2

  GTP/GPRS: disabled

  VPN SSL counterparts: 25

  Total of the VPN peers: 5000

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect Cisco VPN phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes an ASA 5550 VPN Premium license.

  Flash activation key is the SAME as the key running.

  --------------------------------------------------------------

  It seems so obvious that I have to upgrade the first ASA to support 25 SSL VPN peers in order to create the cluster HA, right?

  Now, I want to know do I need the license "ASA5505-SSL25-K9" or something else.

  Thank you very much in advance for any help!

  Ah OK I see - right then: upgading pole will allow the license to share.

  Re the version target, I would recommend going directly to 8.4 (4.1). I have it deployed on several sites without problem.

• RV016 for 20 site to site VPN

  Best regards

  Currently I have a RV016 and a router RV110W to try to connect to one of our branches (retail of clothing) with the central site, we managed to install and VPN works very well, but we have more than 19 stores throughout the country.

  In stores, we can have 2 to 8 computers such as point of sale, one of them acting as server to our system, this server is required to connect to the main server in the central office.

  My question is: we have received some tips from people who say that these facilities are too small to connect to our 20 stores, anyone know if this is true? These RV series are suitable for this amount of connection of branches?

  Thanks in advance for any help!

  Hello

  The ASA5506 is a very good security device and give you a lot more security.   The RV016 isn't a security feature, but it has a firewall.  Less flexible, less features.

  You need the ASA5506-x w / power of fire and more security license.  With the license of security Plus the 5506 do support that 10 IPsec VPN tunnels.  With the license, it supports 50.

  The broadband VPN (speed), however, is substantially the same between the ASA and the RV016.  ASA get 100 Mbps VPN and the RV016 get 97 Mbit/s throughput.  very similar.

  The neck of the bottle is actually with the RV110w on the remote site.  There only get 5 Mbps VPN throughput.  You should consider the RV130W with 50 Mbps VPN throughput.

  Kind regards

• Download of understanding 'Download VMware vSphere Data Protection 6.0 - Open Source'

  Can someone explain to my what download "VMware vSphere Data Protection 6.0 - Open Source" actually offers?

  His text is 'Open Source Code for VMware vSphere Data Protection 6.0' and the OpenSource_VDP_6.0.0.zip ZIP file contains files like commons-validator - 1.4.0 - sources.jar (Apache Commons Validator).

  I guess that it may just be a reference of what free software was used for the construction of POS, but what is the practical use for this download all custmers?

  Thanks for me, illuminating Tom

  I guess that it may just be a reference of what free software was used for the construction of POS, but what is the practical use for this download all custmers?

  VMware, as virtually every software development company, incorporates certain open existing in their own proprietary source code. More open source licenses like the popular GNU General Public License (GPL) legally require you must publish the source code modified with your distribution of binary software (often under the same license).

  There is not really much of a practical use for end users, but it may be useful for other developers and software 3rd party development.

• VMWare storage Data Protection questions

  Hello
  I try to deploy a vmware data protection device.
  When I start the wizard I can create new storage max 2 TiB.
  In the next step, I can click on 'save with device' or I can choose a store of data with max 3 HD is a 1024 bit.
  What is the difference?

  Can I use VMWare holder RFP of a Standard license?

  Thank you
  Dennis

  Hi Dennis,

  Answers to your questions:

  In the next step, I can click on 'save with device' or I can choose a store of data with max 3 HD is a 1024 bit.

  What is the difference?

  With "Store with the device" check box selected. Wizard will deploy discs in the same data store that was chosen for your POS device... If you want to store the discs also uncheck "Save...". "and chose a different stores of data available to the POS device.

  Can I use VMWare holder RFP of a Standard license?

  Yes its included license more critical and more...