View 4 Post synchronization script exact sequence?

Similar Questions

• Script VBS to post-synchronization QuickPrep failed

  We have the post-synchronization script VBS script but the Agent could not run. Here is the log:

  Ready for NEWS - running the script PostSync: "C:\Windows\System32\cscript.exe C:\script\psview.vbs' with timeout: 120000

  Comments FATAL - RunScript: cannot run the script: 00DB2088, error = 2

  FATAL Ready - cannot run PostSyncScript: "C:\Windows\System32\cscript.exe C:\script\psview.vbs"Unable to create processes for the scriptError 2 (0x2): the specified file is not found. "

  The error "Specified file cannot be found" means "file not found".

  The script is present on the image of the mother and the path is correct. There is no problem to run the script when you are logged on the machine with the same exact line: "C:\Windows\System32\cscript.exe C:\script\psview.vbs.

  We follow the VMware KB 1026999 and there is no indication that the VBS is not supported. The workaroud is to call a. BAT script as looping script. It. BAT calls the VBS script and works. Here what this KB says:

  If you use a scripting language that needs an interpreter to run the script, the script path must start with the binary interpreter. For example, C:\windows\system32\cscript.exe c:\script\myvb.vbs.

  Someone at - it clues to this topic? Thank you

  Finally, we found the resolution. It is not well indicate in Administration but guide in "customization" section in the settings of the pool, there are two fields:

  The file name of script-online put C:\windows\system32\cscript.exe

  The script parameters => put the ie C:\script\psview.vbs script file name

  See attached file.

  

• Columns with the INTEGER type in the Dungeon of synchronization that appear in the synchronization script

  I change all the PK and FK which are numbers and number (12) in the field "primary key".
  This changes the ENTIRE data type. Which is what I want to do.
  
  When I run the synchronization generates on:
  ALTER TABLE EDW. SUBSCRIPTION_TYPE
  CHANGE (INTEGER ADDRESS_TYPE_SKID)
  ;
  
  Which is fine, I then run the script. When I Re run the synchronization script, the update continues to display in the script. Even if the column has been updated.
  If I change to a number then it works!
  
  Is this a known bug or just me being stupid?

  Hello

  Is this a known bug

  Bug or feature, not so easy to classify. You can see the solution here, field and Types
  I logged a bug for better handling of such cases.

  Philippe

• After effects CC problems encoding (tilted the view and doubled the by-Side sequence)

  Although starting at the Adobe Creative Cloud space, there is some awareness of the main functions of the system, as well as a few additional details. However, a problem occurred on the encoding and export project Adobe after effects (AE) to Adobe Media Encoder (SOUL) such as the 2D plane (or rather the version preview in AE is flat and not transformed) becomes 3D so that the sequence becomes tilted and lined with a line between clips of same in preview rendering within the SOUL. The system currently used is a MacBook Air, and the Adobe programs were recently installed from 2016. Such a question has never become eminent or circumstantial to anyone on the forum? If there are other details, please ask by responding to this post. Thank you for your time and effort!

  This is an image depicting the situation previously described:

  

  First check the file in another player software. If this is a real problem, we need to know the exact encoding parameters. Such behavior usually indicates an incompatible CoDec which does not have the custom of handloe correctly resolution settings...

  Mylenium

• Charge of the capacitor, synchronization and dish-sequence struture

  Hello

  First I'll give you some information about my project:

  I'm quite new to Labview, but I have much programmed with C + c++ / C/Assembly. The attached program is a small part of a larger system, but I did a version of it, just to get the hang of it. A capacitor (image) will be charged up to 3, 3V. I'll make two measures 2.5 V and 3.3 V, about 3 tau and 5 charging tau. There are some delays and it is here, I had a few problems.

  

  Sequence:

  • As soon as the signal must be 0V for at least 300 ms.
  • The capacitor must reach at least 2, 5V in 430 ms from the beginning.
  • Then the capacitor must reach 3.3 V within a maximum of 510 ms from the beginning.

  My attached program is built on a flat sequence structure (statemachine is maybe better?). If I change the 'Wait 300 ms' ms ' wait 80 ", the first time-check will pass.» If I use 300 ms, the first check-time is about 600 ms and the latest ms 950 (it should have been ms 430-300 ms = 130 ms and ms 510).

  I don't want you to do something for me, but maybe give me a hint where to look. A statemachine would do better than the flat sequence? Am I on the right track when checking the time, or is the number of cycles that is useless in this case?

  Is the code in the category Ruby Goldberg?

  Additional info: I am LV 2009 and 2010, but only the versions of Basic. Data acquisition in my program can be replaced by a signalgenerator of 2.5 V and 3.3 V just to test.

  I think that the program does its job, but my timing is not on the right track.

  Thanks for any help.

  Kind regards

  Even

  I'd do the "timing" completely on data acquisition, it is much better than the drunks. You can synchronize the OD and HAVE to have a shared sample clock and a shared start trigger. When you start the task of the AO, the task of I is also running well (you can also do the opposite).

  In the end, you just need to analyze the data of the task to HAVE it. The sampling rate you calculated that are the data points in the table that correspond to your time limits then the array index and check if the voltage is higher than your limit.

  In addition, you have the complete characteristic curve.

  Felix

• Post print Script

  I just installed the HP officeJet 7500 A device, which is supposed to be a compatible printer Post Script.  I use it with Corel Draw Graphics Suite X 3 Version.  Corel does not recognize the printer as being a Post Script printer when I try to print a file.

  What is the solution?  Is there a post script driver I'm supposed to download or something?  Help... I did research on printers and try to get this problem solved for at least a week now.

  Oh... and when I download a driver... where shall I put it so the printer will find and recognize?

  Alannuts wrote: is there a post script driver I'm supposed to download or something?

  Hello

  The following link is maybe the one you are looking for:

  http://www.Adobe.com/support/downloads/product.jsp?product=pdrv&platform=win

  Kind regards

• Need to run the Calc Script in sequence in MAXL

  Hello

  I need a idea how to run calc in sequence through Maxl scripts. My requirement is to run calc script loads after the end of the last. I try to make the method below, but some how its not working. I'd appreciate any help.

  Thank you

  login password admin on ServerName.

  spool to 'K:\test\MXLTest.log ';

  / * Calculate * /.

  run the calculation App.db.Test;

  function SIERREUR 'error ';

  run the calculation App.db.Test2;

  set the label 'error ';

  spool off;

  disconnection;

  "exit";

  Seems iferror works only with the batch/shell script. I was trying to run EAS.

• Problem with the CentOS post-installation Script

  Good afternoon

  I use VMware Studio 2.6 to create a couple of CentOS 6.2 VMs.  A virtual machine is perfect, the other does not work it's "Script of post-installation of Application."  I find it a little strange because if I just copy the script from Studio in the virtual machine, it works fine.  But not when I'm deployign the OVF.  What?

  The two CentOS systems are virtually the same.  the only difference is in the FULL domain name and host name lines where I grep for different properties of the FVO.

  Someone has ideas how to debug this?  Thanks in advance.  I've included the script to post below.

  #! / bin/bash
  ###################
  # post.sh sets up a new system with the required configuration
  #
  # post.sh v1.0 - [email protected]
  #
  ###################
  # Variables - from the user entered in the OVF properties
  #
  FQDN = "/ opt/vmware/share/vami/vami_ovf_process - p |" grep new_hostname | "cut-d" "'-f4"
  Hostname = "/ opt/vmware/share/vami/vami_ovf_process - p |" grep new_hostname | cut-d ""'-f4 | cut d. "" - f1 "
  DOMAINNAME = "${FQDN #*.} '"
  IP_ADDR = "/ opt/vmware/share/vami/vami_ovf_process - p |" grep vami.ip0 | "cut-d" "'-f4"
  
  
  # Set SELINUX to disabled
  SED 's/SELINUX=.*/SELINUX=disabled/' / etc/selinux/config-i
  echo 0 >/selinux/apply
  
  
  # Set the host name
  sed-i "s/HOSTNAME=.*/HOSTNAME=$HOSTNAME/" sysconfig
  sed-i "s/DOMAINNAME=.*/DOMAINNAME=$DOMAINNAME/" sysconfig
  echo '$IP_ADDR $FQDN $HOSTNAME' > > / etc/hosts
  hostname $HOSTNAME
  service network restart

  Hmm. This does not resemble a script of post-installation for me at all. This script is run at the end of the installation, but the VM has not been deployed yet, so the properties of the FVO are likely not useful (they are only put in place at the time of the deployment, for the * user * unit and you do this during the compilation, like the * author * the device.) The network parameters that exist in the envionment of the author are almost certainly not this as an end user * deployment * unit is lilkely to use; their domain, dns, and network addresses certainly not will be yours). Also, you don't mention how this script "failed", that might help narrow down the cause. Look at the debug log and the postinstall.log and see if you can find the real cause of the error. But in all cases, property OVF stuff you make here is not part of the postinstall script. Instead, it looks more like something that belongs in a script firstboot, although VAMI already does most of what you do with networking.

• post indesign script

  Hello forumers.

  today I printed a document, and when I went to the House of printing, the printer told me that my pdf file was huge, so he recommended the next time I have to save my document as a PostScript, and then use Distiller to adobe that reduces file size

  for the machines to print faster.is this correct? and if yes, how can I implement this post script?

  Thank you.

  At Adobe, we are more strongly and respectfully disagree with the advice given to you by your printer. PDF creation via direct export to PDF is highly preferable to the creation of PDF through distillation of PostScript. There are certain circumstances where in fact you pouvez you end up with a smaller PDF file through distillation of the PostScript, but it is also true that these PDF files are generally of lower quality, the lack of support for dynamic transparency, color management and the ability to easily search and/or file editing of PDF in Acrobat.

  -Dov

• Post-Clone script error

  Hello
  I am facing clone after error on aix 5.3 OS 11i when I run the script clone post about db, he error.share any solution is much appreciated
  $ perl adcfgclone.pl dbTier
  Enter the password [APPS] APPS:
  
  
  First create a new context for the cloned system file.
  The program will ask you for information on the new system:
  
  RC-50004: an error occurred in CloneContext:
  null
  Check the log file CloneContext_01210431.log for more details.
  ERROR: creation of context not completed successfully.
  Please check for errors in the /tmp/adcfgclone.err file
  
  Thank you
  MAAN
  
  Published by: user1116442 on January 20, 2011 03:40

  Please see the two docs referenced above.

  Thank you
  Hussein

• Calc scripts in sequence

  Hi all
  
  We have requirment to run calc scripts in the order they are dependent. If we merge all the scripts in a script then due to dependence, the calculations do not or not giving not correct result.
  
  Is there a way to make the calculation scripts are setup in order in the script of a calculation and a single Script provides details for the two Script and so on. We do not want to use business rules because of the given assignment of security which will be very tedious work.
  
  Thank you and best regards,
  Konrad.

  Sequences and business rules would be the correct procedure to use with planning.

  But I don't see how running separate calc script is going to be different that implemented a calc script, which does not any sense.

  If you want to run calc scripts in order then you could batch usage maxl.

  I do not know what information you want to pass between calc script but you can use substitution variables, as that be used in a script.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Image on both monitors synchronization script

  So I have two monitors and several dual screen wallpapers I want to be able to scroll. I have an Applescript script that I got from these forums that someone wrote for this purpose, but I get an error that I can't solve everything. The idea is that the script searches a folder, grabs a random image in this folder file name and seeks the same file name in a second file (a single folder is for the left screen and the other is for the right monitor). It is presents the office as well as the file in the folder 'RIGHT', and then he put the second office with the same file name in the folder "LEFT". This is the script:

  Repeat

  say application 'Finder '.

  game of this_folder to ' Mac Pro: data users: me: photos: desktop computers: _12South:LEFT:

  put raddbdir to the of some file in folder this_folder name

  the value Left_Image to {"" data: Mac Pro users: me: photos: desktop computers: _12South:LEFT: "& raddbdir &" ' "}

  the value Right_Image to {"" data: Mac Pro users: me: photos: desktop computers: _12South:RIGHT: "& raddbdir &" ' "}

  the value image of the desktop to Right_Image as alias

  say application "System events".

  the value theDesktops to a reference in each Office

  set photo of point 2 of the theDesktops in a file Left_Image

  end say

  end say

  delay of 900

  end Repeat

  The paths are 100% correct, so I'm not concerned about it. I get the script error is:

  Events system was an error: can't do integer {"Mac Pro Data: Users: me: Pictures:Desktops:_12South:LEFT:8.jpeg '}.

  And he highlighted this line in the script:

  set photo of point 2 of the theDesktops in a file Left_Image

  It is striking not properly file names. It correctly sets even the image of the main office. "It looks like it runs into trouble when he tries to set the second monitor (left)). Any ideas?

  I think you should just put it as an alias on the end of the line image of the second monitor.

  (I don't know why you have braces around the assignment of image variables.  You're not dealing with lists, you do not have need of them.)

• Mini 210-1080NR: down loaded Windows 10. view now showing BACK script and will not change. Mini 210-1080NR

  Try load W-10. Process appear to be normal. The display is now BACK showing script and will not change and cannot close the laptop down or off. Not a user made and do not want to complicate the issue.

  WAWood;

  The laptop has completed W - 10 download and installation seems to work as announced.

  The problem with the 1st attempt will be captured in Gremlins.

  Thank you for your quick response.

  Ben

• Sansa View does not synchronize with the computer after the first connection

  Hey guys,.

  I just bought a refurbished Sansa View which has the latest firmware on it. I logged on to the computer and selected "view in the folder. I downloaded some stuff and disconnected.

  Now, whenever I try to connect it again, the computer or the Sansa Connect. The Sansa start loading, but the 'Sync' screen does not appear on it. The computer shows nothing and the device does not appear in Device Manager or my computer as it did the first time. If I look through the USB devices in Device Manager I see a device using the power, but that's all.

  I tried the "MSC Mode" setting in the Sansa View settings, but it is not always connect. Don't hold.<" while="">

  I use Windows XP, SP3.

  Any help would be really appreciated,

  Thank you

  Nevermind, apparently, you need to do to reset once changed the settings in MSC mode on the player. It works fine now!

• How to add the script sequence to the column in the business component * I have this script for sequence * (CREATE SEQUENCE COL1 START WITH 1 INCREMENT OF 1 NOCACHE NOCYCLE ;)

  Hello

  Take a look at the link below, it gives different ways to use the sequence.

  Using the sequence of database in ADF - Souza Waslley Blog

  https://tompeez.WordPress.com/2011/09/02/using-Groovy-expression-to-set-a-primary-key-with-a-sequence-number/

  http://hasamali.blogspot.com.au/2011/04/ADF-BC-various-way-of-setting-sequence.html

  See you soon

  AJ