View s/n does not start in SQL Developer 4.0.2

Similar Questions

• ESCR does not work in SQL Developer Version 1.1.3 build 27,69

  Hi all
  
  I'm using Oracle SQL Developer Version 1.1.3 Build 27,69
  

  Select count (*) ABC

  count (*)
  100
  
  using desc / describe table name gives error
  

  abc desc

  ERROR:
  ---------------------------------------------
  ERROR: object that there is no such thing as abc
  
  1 selected lines
  
  I am able to run select on the table but not describe desc. I tried suffixing with the schema name, still the same error persists.
  
  Please provide a workaround solution
  
  TNX

  Well 1.1.3 is old enough.

  The best thing to do IMHO is updated to the latest version, this will also allow a load of new features and fixes.

  http://www.Oracle.com/technetwork/developer-tools/SQL-Developer/downloads/index.html

• Does not start under Oracle Developer Suite 10 g YES

  Hallo! I am a newbie in Oracle 10g. I try to install Oracle Developer Suite 10 g for Windows XP in an old PC with the basic specifications following
  Processor Pentium 4 2 GHz
  512 MB OF RAM
  HARD DRIVE 40 GB
  
  I tried to run setup.exe, a dialog box appears as below
  From Oracle Universal Installer...
  Checking Installer requirements...
  Checking the operating system version: must be 5.0, 5.1 or 5.2. 5.1 membership
  Past
  Monitor: must be configured to display at least 256 colors. Real
  Passed 4294967296
  Check the swap space: must be greater than 1535 MB. Real 1536 MB passed
  Check the Temp space: must be greater than 150 MB. Real 8569 MB passed
  
  Met the requirements of the installation program.
  Preparations for the launch of Oracle Universal Installer from C:\DOCUME~1\4joey1\LOCALS~1
  \Temp\OraInstall2010-11-07_11-23-40AM. Please wait...
  
  The setup.exe crash dialog box appears indicating that setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
  
  I managed the Developer Suite 10 g in a higher - end laptop. From the dialog box above, I assumed that met all the requirements of the installation program. So why can't the YES will be launched?
  
  Please help me.
  
  Thank you.

  Hello

  Can be 512 MB of RAM is small, try to increase your RAM

  Another issue can cause this problem, do not put the developer suite in a long journey (i.e.------...-...-..-), try the source directory to the root of your drive.

  Concerning
  Mostafa Abolaynain

• the inventory of VMware service does not start, the wrong function, bad sql server port

  I've migrated vcenter SQL database to a new server after this KB

  https://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 7960893

  but now most of the vcenter services does not start cause of according to the inventory service.  I see service log of inventory which is the problem, it tries to connect to SQL Server by default, 1433 port, but my SQL server instance is listening on a different fixed port, I don't want to change.  Where can I configure the inventory service we another port of SQL Server?  According to a KB related to the above, it is possible to do

  https://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2033516

  but unfortunately I have vcenter 6 and the instructions above do not seem to apply, I can't even find ssocli, the mentioned folder structure does not exist on my installation

  
  Thank you.

  I solved this.  Despite what has been reported in the newspaper the issue was not the port.  The new database is a named instance, the connection string for vcdb.properties, he entered as the server name = hostname\instancename in fact, it is necessary to use two slashes return hostname\\instancename :-/

• Developer SQL does not start on Mac OS x Lion

  Hello
  
  hoping someone can help me with this one, I've been running 3 SQL Developer on the macbook no problem for about a year, I have recently updated to Mac OS x Lion and now when I try to start SQL Developer, he is not running.
  
  I downloaded and installed the latest version of java, as noted on the download page of SQL Developer.
  
  When I start the SQL Developer and view the activity monitor the 'bash' process starts to use 100% of the CPU very quickly and Developer SQL can't yet to the start screen.
  
  Can someone point me in the right direction in terms of diagnosing this problem? Is there a log file I can see again or how to start the SQL Developer with specific arguments?
  
  Kind regards
  Stu

  Developer SQL works for me on my Macbook the Lion. Corresponding host Java looks like:

  /System/library/Java/JavaVirtualMachines/1.6.0.JDK/contents/home

  Here's how my conf file is set up:

  AddVMOption - Dcom.apple.mrj.application.apple.menu.about.name = "SQL_Developer"
  AddVMOption - Dcom.apple.mrj.application.growbox.intrudes = false
  AddVMOption - Dcom.apple.macos.smallTabs = true
  AddVMOption - Dapple.laf.useScreenMenuBar = true
  True SetSkipJ2SDKCheck
  SetJavaHome /System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home
  AddVMOption - Xbootclasspath/p:... /... /RDBMS/jlib/ojdi.jar

  (/ Applications/SQLDeveloper.app/Contents/Resources/sqldeveloper/sqldeveloper/bin/sqldeveloper-Darwin.conf)

  Good luck!

  -Andrew Wolfe

• 4.0.2.15.21 - x 64 SQL Developer does not start.  Only ends about 20% at startup.

  Hello

  I've seen a number of discussions on this issue but did not answer that worked for me.

  I use the latest version of SQL Developer 4.0.2.15.21 - x 64 on Win7 x 64.

  It is unziped to c:\oracle\sqldeveloper. (I don't have a d: drive install on).

  It fails to start, is 20% then stops.

  I still have an old 4.0.0 version which works, but would like to make use of the latter.

  All the answers about why it's a failure and how to fix it?

  Thank you!

  Owen.

  Nuke SQL Developer Directory for this version in your directory of Application data for the user of your operating system - should be under roaming profiles and start the SQL Developer.

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)

• The app on the market does not start, the page is white with some Blue Cross top left.

  The market does not start even on the internet.

  Hey Karin!

  I'm sorry you had to go through the frustration that you presented this nuisance. I am very pleased to hear that these steps solved your problem. =)

  Enjoy new applications you find on the market of Firefox. Here are a few suggestions that I find very useful, to help you get started:

  • Documents Viewer
  • Notes, you can synchronize with Evernote
  • PDF Viewer
  • File Manager
  • ConnectA2 to be able to chat with users of WhatsApp
  • Telegram, Open Source, cross-platform and safe customer chat
  • Dial.Radio, because all the world could use a little music on their lives

  Have a wonderful day and please feel free to post new threads in the SUMO forums, if you have other questions about your Firefox OS device.

  Thank you

  -Ralph

• Satellite A200-08JC - software of the camera Chicony does not start

  I installed the correct drivers for my 08JC satellite A200 XP, but when I click the button start to run the software, it shows something loading for a few seconds, then stops. The camera does not illuminate and the display software that shows the view of the camera does not start: nothing happens.

  I searched around on Google for a solution, but other users having similar problems to the least get an error message to help. I have nothing like that.

  Does anyone have ideas that could help?

  And what dodey now?
  Driver installation doesn t help, you don't want to test the functionality of device with the settings you would expect now?
  A magical solution or what?

  Description of your model name is somewhat strange and A200-08JC is not known to me but overall Satellite A200 notebooks are WXP supported.
  Can you please post the model name for laptop again?

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• Re: Smoker L30-10 X PSL33E does not start after upgrading RAM

  Hello

  I have a problem with my laptop.
  It has 1024 MB of RAM (2 x 512), but it wasn't enough, so I decided to update to 2048 MB (2 x 1024).

  I bought two modules and my computer does not start after changing them.
  It was only a screen black (same BIOS has not started). I tried another combination of installation of memory modules RAM.
  2 x 1024 - did not work
  1 x 1024 - did not work
  1 x 1024 + 1 x 512 - working but not properly.

  BIOS find that I only 896 MB (1024-128 for the video card)
  I said OK. Let's see what will show windows. He was also 896 MB.
  I launched CPU - Z and it shows that the total size of memory is 1536 MB (medium detect both modules).
  I found that CPU - Z detect 1 module 1 024 MB and 512 MB secondary, but the BIOS detect only 1024 MB 1536. How is that possible?

  I have fought, is that my BIOS is old, then I update the toshiba Web site form most recent version, but the problem persists.
  Please someboy help me and tell what to do.

  PS. the Modules are new and work correctly.
  They have been tested.

  Hello

  Have you used two identical RAM modules?

  What kind of modules did you use?

  In my view, that the problem is related to the new, inserted modules.
  There must be something wrong with the modules or modules are not completely compatible if the laptop can not boot after installation.

  According to a few pages of the book handles the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM modules.

  Did you use these modules?

• Pavilion dv6: computer HP pavilion laptop does not start and I do not see the screen because it's broken

  I have the HP pavilion computer laptop windows 7 and I broke the screen about a year, I can't see the start menus. I have been using an external monitor and it has always worked well, but now I can't see how to fix my computer to boot.  I did a hard boot but nothing happened, and with a broken screen, I can't see any of my options on how to fix it.  It does not start.  Looks like it is, but because I don't see the menu F8 or Boot, I can't call themselves that the screen can be done.  Help, please.

  Hello @SPKaler,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the issue with the laptop won't start does not and wanted to help you!  I understand that the screen is damaged and you are using the external monitor to view the screen.  However, now that the laptop does not start, you can see is more of the external screen to see what is happening.

  From my understanding, you should not be able to see an image on the external monitor, until you start the operating system.  You can try to perform a system restore by using this document:

  HP computers - performing a recovery of system HP (Windows 7)

  You may be able to follow along, long enough until the image is displayed on the external monitor.  Otherwise, you can contact HP support by phone, for additional options.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Compaq 56z-200: does not start

  In my view, an overheating problem.   He always ran hot, even when it is new and clean.   Wife and children insisted on holding their towers to use and also blocked vents a problem.       Symptoms: 1) the final a few times it would start the a/c with an error message (battery failure) (this only refers to the main battery only or the BIOS battery?)     (2) after 10 or 15 minutes of use a gray screen blocking.   Let it cool would allow it to restart.     -How distinguish the problem I did one last backup with starting on a USB key.    During other troubleshooting with impulse of air to cool the screen turned gray and I was to turn it off, the screen quickly started to turn red from bottom to top, and then it turns off.  -Since then, it does not start, even using the USB key.   It lights up, the fan seems to work and it gives an indication it is powered (a/c), but none of the keys work, and the caps lock light flashes 1 x per second continuously.   QUESTION: I've already replaced the computer.     Is a throw away the old, or something simple and inexpensive could record for games or surfing the net safely?    Y at - it parts worth saving, HDD, RAM etc?    My computer, a Comqaq 2000 seems looks the same, except for the name.

  Hi @Jimsquest,

  If you've done every step of the document and still have questions, please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Wireless zero configuration does not start automatically. I need to run it whenever I restart the computer

  Wireless zero configuration does not start automatically.i have to start whenever I restart the computer. I have a laptop dell inspiron

  Moved from feedback

  Original title: WiFi

  Hello

  1. what version of Windows is installed on the computer?

  2. is it works much earlier?

  3 have there been recent changes made on the computer before the show?

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel.

  If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools.

  If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic.

  This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the Wireless Auto Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt.

  To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

  For more information, see the link.

  Wireless Zero Configuration Reference

  Please post back with the results and we will be happy to help you further.

• Error - Connection Internet Service does not start when try to start Windows Security Center.

  Original title: Windows security center usually run in windows XP.

  When I open the control panel and click on security, Windows Security Center indicates that it is not executed and wont run then when I try to turn it on I say error message does not start internet connection service. Also, my computer has been slowing way down lately and it takes forever to do even the simplest taskes. I just uninstall norton because my subscription ran out and then I installed MSE and malwarebytes MSE runs even slower, so I got rid of him.

  -Edit
  I also tried to use FixIt, but he said that there was an error during installation.

  Thank you. I had security work center. That's how I did it.

  I wen to your link and found that I needed to go to start-my network places - view the network (in the sidebar) connections - click Properties (click on) Local Area Connection 2 - click on the Advanced tab - click settings (skip this step if who does not appear)

  now, here, he said that there is an error and that I needed to start a process. I think it was 'Windows management instrumentation' but whatever it is, click Activate and change the startup type to automatic, and then click Start. then try to then you should do the same thing with

  • Application Layer Gateway Service
  • Network connections
  • Knowledge of the network (NLA) locations
  • Plug-and-Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Remote procedure call (RPC)
  • Telephony

  Then Security Center. When you press OK in the properties, you should see a small lock appears on the network connections icon. now Security Center should work.

  useful articles:
  http://support.Microsoft.com/kb/919291
  http://support.Microsoft.com/kb/827328
  http://TechNet.Microsoft.com/en-us/library/bb457029.aspx