VimApi find a store of data whith FindByDatastorePath failed?
Hello
I'll try to find a store of data on my ESX 3.5 server, there are 3 data warehouses:
\[storage1\]
\[storage2\]
\[storage3\]
I used the following c# code to find storage3,
ManagedObjectReference _DataCenter = SvcConnection.Service.FindByInventoryPath (Indexderecherche, datacenter). ManagedObjectReference _DataStore = SvcConnection.Service.FindByDatastorePath (Indexderecherche, _DataCenter, the data store);
_DataCenter is returned successfully.
[When I fill out whith variable datastore 'storage3' it is a thrown Exception 'path of the invalid data store', so I tried to fill it whith "\[storage3\"] had so far all is fine but the ManagedobjectReference _DataStore is 'null '.
What im doing wrong?
THX, Christian
I enclose you a script that illustrates retrieving the Mor I host datastore information hope this helps.
Tags: VMware
Similar Questions
-
Find the store of data with more free space.
So I'm trying to build a script to configure the virtual machine.
I'll have it retrieve the node to keep newly available vm out based on the cluster, I said to use. I'm just using the Random function to do that then I select a node in the cluster.
Where I have questions, how can I
find the data store less used, based on a particular data store naming scheme.
I want to say is:
Hypathetically, I for example named data warehouses:
store data-prod-01 200 GB free
store data-prod-02 500 GB free
free data-prod-03 10 GB store
free data-qa-01 200 GB store
free data-qa-02 1000 GB store
I want to throw in a piece of code to tell him to watch data warehouses "datastore-prod *" and place the virtual machine on the store of data with the most space. (that's assuming that the vm will agree on the DS and let fresh generals)
I guess I want to know if it is possible?
I would also be concerned about scenario that perhaps the vm should I build just will not match on any of my other data store. I guess I need a logic to check if it is still possible.
This is more than a wish rather than a necessity. I'm thinking if I just read the info, or use a cvs file after running the script. Any recommendations would be greatly appreacted.
Hello, drivera01-
You should be able to do this with a very small amount of code. Download all data warehouses that correspond to the model name, sort free space (in descending order) and select the top one. As:
## get the datastore matching datastore-prod* that has the most freespace$oDatastoreWithMostFree = Get-Datastore datastore-prod* | Sort-Object -Property FreespaceGB -Descending:$true | Select-Object -First 1 ## if the freespace plus a bit of buffer space is greater than the size needed for the new VMif (($oDatastoreWithMostFree.FreespaceGB + 20) -gt $intNewVMDiskSize) {<# do the provisioning to this datastore #>}else {"oh, no -- not enough freespace on datastore '$($oDatastoreWithMostFree.Name)' to provision new VM"}
The second part, where it checks for sufficient freespace on the data store that has the most free, can be updated to behave as you need, but that should be the basis. How does this look?
-
Hello
I am new to vCenter Server, so you can assume that I'm missing something obvious.
I installed vCenter Server 5.5 and one of the two hosts of re-usable ESXi 5.0.0 connected correctly. When I try to connect to the second 5.0.0 ESXi host, I get the error message:
Data store 'datastore1' is in conflict with a store of data that exists in the data center which has the same URL (.), but is supported by different physical storage
I Googled it and found what I think are the best answers that are successful, but they all seem pretty unique in their situation (they have a cluster, I do not have) etc. Some solutions involve disconnecting the store of data and reconstruction of things. I would not make things worse and can live without doubt with the help of vSphere client (and not the web client) until maybe I can start again with a 5.5 installation to a new host once I have back up everything from the host unconnectable. I closed all the VM on the host of the second. I have put in maintenance mode. I've renamed the data store, all to nothing does not.
Thanks in advance
The problem is that a whole army could not be connected to vCenter due to the problem, the solution involving disconnection of the host apply.
Here is how I solved the problem:
1 use the client vSphere client heavy, connect you to the host that cannot not be connected to vCenter Server.
2. click on the host computer, and then click the Configuration tab.
3. click on "storage".
4. find the offending on the right data store.
5. right click on the data store incriminated and click 'remove '.
6. click on 'Add storage' in the top right.
7. follow the steps to find this data not mounted store. I gave him a new name just to be sure, even if it's probably not necessary.
-
Hello
PowerCLI - there cmdlets to browse the store of data for files/directories and their creation?
If Yes, can you please let me know.
I took a glance at the reference of the cmdlet, but can not find...
Kind regardsDreamer
You can use the data store provider.
It is documented in the vSphere PowerCLI Administration Guide that was installed with PowerCLI.
-
Hi all -
I find VMware site but can't find any info about my installation and hope someone can help me with a few questions about the configuration of the data store, or maybe someone has implemented a similar setup in their environment. Any comments would certainly be appreciated
Questions: I have two 5.0 ESXi host and will link to 5300 VNX via iSCSI. Each ESXi will host virtual machines about 6-Windows 2008 R2 File servers each - VMs C: 50 GB on iSCSI SAN disk. Data store single for example 500 GB for all readers of VMs C: create?
In addition to the C: partition, each VM file server will host several partitions greater than 2 TB data, for example a 3 TB S: and T: 2 TB partition I create a store of data for each partition and under the VM iSCSI, select change settings, select Add hard drive, and then navigate to the data store for each VM partition? This means that I will create a data store for each partition of data correct?Thank you
.
almost:
ESXi 5.0 supports LUN/data warehouses with up to 64 TB (without extensions). = RDM in physical compatibility ((pass through)) mode
AND
2 TB less 512 bytes for virtual disks on VMFS datatores. = Of VMDK more RDM in virtual compatibility mode
André
-
Way to know which table APEX stores the data of particular application?
If, for example, I went to the shared-> components Templates-> change the Page template
and I want to know what APEX table stores the data that is displayed on this page in the definition-> header section
is it possible to do?
In this particular case, I would like to ask all requests for one ' < link rel = "stylesheet" ' string
Any guidance would be GREATLY appreciatedYou can find it in every application > utilities > APEX views > APEX_APPLICATION_TEMP_PAGE. You must connect this point of view the point of view of APEX_APPLICATION_PAGES in order to get this info.
Denes Kubicek
-------------------------------------------------------------------
http://deneskubicek.blogspot.com/
http://www.Apress.com/9781430235125
http://Apex.Oracle.com/pls/Apex/f?p=31517:1
http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
------------------------------------------------------------------- -
Space in the store of data not released when a virtual machine is removed
Hey all,.
I have a game fairly simple up - two servers ESXi 2 Terminal servers. I'll have a problem, but with space in the store of data not be released on one of them after that I got a clone to the virtual machine, made my changes and removed the original. I can find no record anywhere, using vSphere (not in the inventory or when I browse the data store), but the HARD drive space using the server is still assigned somewhere.
Any body have tips on where to find or how to fix this if it is indeed a problem?
Any help is greatly appreciated.
Thank you.
How bout refreshing your data store? tab Configuration-> storage-> refresh?
vcbMC - 1.0.6 Beta
Lite vcbMC - 1.0.7
-
2.0 server loses the connection to the store of data on reboot
I will install ESXi on my server in the very near future. I just ordered another NAS (Buffalo Terastation Pro 2 TB II) and prefer to use it for a data store since I can't afford a SAN skinning in LUN for my virtual machines.
I'm running 2.0 on a Windows Server 2003 Server. I have a problem and I was wondering if you had this happen or know how to prevent it from happening.
I copied some of my virtual machines from the current server to a 1 TB NAS (Netgear Ready NAS NV +) which is located on the network. I added the data store to the server pointing to it as a CIFS share. Everything seems to work fine until I restart the server... then it can not find the data store. I tried refreshing the data store, but it does not. I have to actually remove the data store and Add again... If I just try adding another store of data that it knows that it is mapped to the same location and she won't let me. So I remove, add a data store and computers virtual it appear in the server... I thought I could try the drive mapping to the location of the data store but it won't let me just use the drive letter mapping, it requires the name of the folder too... Any thoughts?
Thanx
There is a workaround solution posted here:
http://communities.VMware.com/message/1098864
BTW. I found it by searching the community for "CIFS".
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
Creating a store of data on ESX 3.5
I have a setting wrong until a data store on ESX 3.5. Recently, I got a Dell PowerEdge 2900 (two Intel Xeon Quad Cores with 32 GB of RAM, just in case where this info would be important) and installed ESX Server 3.5 on it. Before installing ESX, I created two virtual disks on the server, one that was used to install ESX and VMs on and another larger virtual disk which should be used as the primary storage for virtual machines, images of .vmem more etc. The largest virtual disk consists of eight SAS 400 GB hard drives in a RAID 5 configuration. ESX is installed and runs on the first virtual disk very well. The problem I have is that when I try to add the virtual disk larger than a store of data in VMware Infrastructure Client it shows 2.54 TB capacity, which is what it should be, but is showing that 555,99 GB available space. This doesn't seem fair to me. This virtual disk has been defined, so it is completely empty. Maximum RAID 5 configuration must use the equivalent of one of the 8 disks for parity data, theoretically giving me ~ 2 TB of usable disk space to use as a data store. Is there something I'm missing here? Any help would be appreciated!
Welcome to the forums - the problem is the size of the largest LUN - maximum ESX and ESXi recognized the LUN size is 2 TB by maximum configuration http://www.vmware.com/pdf/vi3_35/esx_3/r35u2/vi3_35_25_u2_config_max.pdf- so you'll have to sculpt your drive to the top in less than 2 TB LUN.
\If you find this or any other answer useful please consider giving points by checking the correct or helpful answer
-
AT100 - impossible to get my calendar to store the dates of the annual events
Hello.
Cannot get my calendar to store the dates of the annual events birthdays for example.
Option gives (annual 27 July 2012), but would it be fair (27 July each year). No way to remove year so presumably won't wait that 2012 will come along! All the other choices for weekly and monthly do not specify the year.Annual option should I think be the same. Tried to enter next year, but comes with (year July 27, 2013) so it looks that have to enter every year which is a pain. Someone at - it ideas.
It's my first post he hopes in the right place.
Thank you
Hello
Why you n t try another Android app like for example calendar of birthday or anniversary Assistant
-
Camcorder Camileo P100 store the date and time
My recently purchased camcorder camileo P100 store the date and time.
Whenever it starts it must be reset because it refers to the default date.Has anyone else had this problem
It looks like a camera malfunction don t think you can fix it.
I suggest you to get in touch with the dealer and replace the cam -
Hello
I can't find acquisition of ICP data and Signal Processing controller, memory controller PCI bus controller SM for HP EliteBook 840 G3 running Microsoft Windows 7 Enterprise (64-bit).
Any help is greatly appreciated!
Hello:
See if this driver works...
-
I have a set of data
lets say
"3.45, 1.21, 3.67, 1.23, 4.78.
I want to store these data in a table. So, how would I be able to store them in table form and yet be able to view the data?
-
cannot find the folder "program data".
original title: New Data - Program for Windows 7
I just bought a new computer with windows 7. I am trying to install programs, for example, installing a program to C:\program data\Quantum. I go to 'my computer' and can not find the folder "program data". Is it possible that windows is hide it?
SandyHi Sandy
The program data file replaced the all users in previous versions of Windows.
Open Windows Explorer. Click on organize / folders and Search Options / View tab.
Select the option Show hidden files, folders and drives, and then click apply/OK.
Navigate to C:\Users. In this folder, you will see a folder named all users with a shortcut arrow or the layering of padlock. It is a symlink pointing to the ProgramData folder. Right-click on the folder and select properties to see this data.
Your programs are not currently installed just for the ProgramData folder. This folder is used to allow any user (for all users) access to an installed program that allows any user to operate this program.
Many times, when you install a program, you will see an option to install the program for the current user only, or to install for all users.
Another way, you can see it is to click on the Start button, right-click on all programs, and select open all users. This will open Windows Explorer to the
C:\ProgramData\Microsoft\Windows\Start Menu folder.
Let us know if you have any other questions.
Concerning
-
How to store/retrieve 'Date' using persistent data?
Hello everyone - this is my first post on the BlackBerry Support Forums. I'm trying to provide a lot of relevant information as possible, but if I miss anytihng or I did not understand by asking what I want, please let me know.
Background:
I use Eclipse IDE ver 3.5.0 and BlackBerry Java plug-in for Eclipse 1.1. I build my application for BlackBerry JRE 5.0.0.
Question:
I want to save a "Date" field for persistent data so that I can recover and display in the format of Date once again (no chain). Here's a more detailed explanation.
My application has three fields on the main screen. They are
'Name' - AutoTextEditField
"Gender" - ObjectChoiceField
"Date of birth" - DateField
Using persistent data to store the data entered into these fields, as described in the BlackBerry tutorials (http://na.blackberry.com/developers/resources/A13_Storing_Persistent_Data_V2.pdf), I am able to save and retrieve all of these areas, but only in 'Chain' format.
Unfortunately, this won't work for me for the following reason.
I create the Date of birth as follows
"dateOfBirthField = new DateField (" BirthDate: ", System.currentTimeMillis (), DateField.DATE" ");"
This creates an interface evolved for Date of birth, where the user can select and edit fields month, Date and year separately. When the user saves the information entered and wants to retirve it again, I want to display the date recorded in the same format so that the user can change again in exactly the same way as described above. But if I save it as a string, I can't fill in the field "Date" with the "chain" recovered. That is, I can't do something like
dateOfBirthField.setDate (info.getElement (StoreInfo.DOB));
Where "info.getElement (StoreInfo.DOB)" is similar to what is described in the tutorial.
I searched the web for a possible solution, but never found any. All I found to date stored as a string and recovered just to see what was saved, but not for the changes resulting.
Someone please let me know if what I am asking is possible. If Yes, can you please suggest a way to do it?
Thanks in advance.
Or it can store any object extra Long, no need to create garbage in chains.
Long I = new Long (1234556);
long x = i.longValue)
Maybe you are looking for
-
Satellite P200 1EE - this can produce to 1080 p via HDMI?
Hello My first post on this forum. I recently bought this laptop and plugged into my LCD TV at home. However, I can't seem to get 1080 p via HDMI 1080i (my TV is able to accept 1080 p via HDMI). Anyone know if this is possible? (I've updated the late
-
For a DMA FIFO running from the host to the 7976 is a data type that is optimum for PEP?
For transmission to the host 7976, I can pack my data in say U64s or break up in U8s. Y at - it a data type that will give the best rate? Maybe based on the bus (SMU) or the implementation of RIO drivers behind the scenes?
-
AllinOne want 4500: OSX 10.6 and 4500 want to crash HP and Capture of Image
Thanks in advance for the help. Running OS x 10.6.3 Snow Leopard on an iMac 2 GHz Core 2 duo with 2g of memory. I installed the software included for 4500 want disk and configure the wireless connection. The machine will print wireless with no probl
-
Cannot turn off read-only attribute. Only perform the media folders.
Yesterday, I noticed that all my files storage of media, that is to say, photos and music, hear the read-only attribute. When I try to stop, it acts like it is trigger attribute, but it doesn't. There is a lock on these folders icon. I have admini
-
Preloaded Norton Internet Security 2011 crashes Windows 7
My 6620 Pavilion came preloaded with Norton Internet Security 2011 - who works in isolation, but causes of the accidents and crashes when any other software infringes on its ares of operation. It is not always clear what are these competing programs.