Violation of quota

Similar Questions

• Access violation at address 74F735D1 in module "OLEACC.dll". Read of address 00000048

  Original title messages: error

  Can you please help me fix this annoying message. I get several guests for her, and I don't know why.

  Access violation at address 74F735D1 in module "OLEACC.dll". Read of address 00000048

  Hi   Travis815,

  (1) when exactly you get this error message?

  (2) since when are you facing this problem?

  (3) remember you to make changes to the computer?

  Please quote the complete error message you receive.

  Method 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 How can I solve violation of CPD watchdog

  Hi everyone I have this violation of watchdog of dpc error or problem

  I have no anti virus I use windows defender
  Here's my minidump files
  https://SkyDrive.live.com/redir?RESID=4FA3638D1C4E9D1B! 393 & authkey =! APe7M18qfTisH0o
  Thank you

  Of course, it's a driver problem.  Please run the Driver Verifier to find what's wrong to behave

  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  But sometimes it will crash and will not tell you the driver.
  Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems.
  Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  Click Start and type "auditor" (without the quotes) and press enter
  Select 'Create a custom settings (for code developers)' and click 'Next' (or Type "check/standard/all" (without the quotes) If you want to check each of them (this will slow down your computer))

  Choose "Select custom settings from a full list" and click "Next".
  Select the entire document except for "Low resource Simulation" to win 8 do not check concurrency stress test and the verification of the conformity of DDI, click "next".
  Select "Select driver names from a list", then click "next".
  Select all drivers that are NOT provided by Microsoft, and then click "Next".
  On the next page, select "Finish".
  Restart the system and wait as he crashed to blue screen.
  Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  If you are unable to Windows because it crashes too early, try safe mode.
  If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  Further reading
  http://support.Microsoft.com/kb/244617

  Words of driver verifier
  Information check driver driver Windows Vista - Microsoft Search Verifier
  Questions of Verifier within Vista / Windows 7 http://support.microsoft.com..default.aspx?+verifier1&res=20
  Pilot feature pool http://support.microsoft.com/kb/188831

• Quota is UNLIMITED, but encountering ORA-01536: space quota exceeded...

  I need help to know why we have this problem. I try an insert statement and get ORA-01536 on a table to which my user (BLF) has an unlimited quota on default tablespace of the table.
  
  The problem is solved when I give you unlimited quota for the owner of the table (XXPCK), which was previously no quotas of any kind granted to it. Note, that it worked without error for months and now it does not work. This table has a few hundred lines added each month (not a ton of data goes). It's on Oracle 11.2.0.1.
  ********************
  Error encountered below:
  DBNAME > show user
  The USER is "BLF".
  DBNAME > insert into xxpck.xxpck_package_lines (package_line_id, line_num package_id, line_status, created_by, creation_date, last_updated_by, last_update_date, entity_id) values (111,10,873, 'NEW',-1, sysdate-1, sysdate, 37);
  insert into xxpck.xxpck_package_lines
  *+
  ERROR on line 1:
  ORA-01536: space quota exceeded for tablespace "INTFD".
  ********************
  DBNAME > show user
  The USER is 'SYSTEM '.
  DBNAME > select MAX_BYTES, MAX_BLOCKS, nom_tablespace, BYTES, BLOCKS of dba_ts_quotas where USERNAME = "BLF";
  NOM_TABLESPACE BLOCKS MAX_BLOCKS MAX_BYTES BYTES
  ------------------------------ ---------- ---------- ---------- ----------
  INTFD 1536128 - 1 1.2584E10-1
  
  DBNAME > @quotaupdate XXPCK INTFD UNLIMITED
  old 1: change user & 1 quota & 2 3 & on
  new 1: change the quota UNLIMITED on INTFD user XXPCK
  
  Modified user.
  ********************
  Ignore the unique constraint error below, just to note, we meet is no longer the error ORA-01536. Why is this?
  DBNAME > show user
  The USER is "BLF".
  
  DBNAME > insert into xxpck.xxpck_package_lines (package_line_id, line_num package_id, line_status, created_by, creation_date, last_updated_by, last_update_date, entity_id) values (111,10,873, 'NEW',-1, sysdate-1, sysdate, 37);
  insert into xxpck.xxpck_package_lines
  *+
  ERROR on line 1:
  ORA-00001: unique constraint (XXPCK. XXPCK_PACKAGE_LINES_U1) violated
  ********************
  We now have the value quota 0 to XXPCK see if that makes a difference.
  
  DBNAME > @quotaupdate xxpck 0 INTFD
  old 1: change user & 1 quota & 2 3 & on
  new 1: change the xxpck user quota 0 on INTFD
  
  Modified user.
  ********************
  Is, we get the error ORA-01536 even after the owner of the quota (XXPCK) 0 table setting.
  DBNAME > insert into xxpck.xxpck_package_lines (package_line_id, line_num package_id, line_status, created_by, creation_date, last_updated_by, last_update_date, entity_id) values (111,10,873, 'NEW',-1, sysdate-1, sysdate, 37);
  insert into xxpck.xxpck_package_lines
  *+
  ERROR on line 1:
  ORA-00001: unique constraint (XXPCK. XXPCK_PACKAGE_LINES_U1) violated
  
  Published by: Aldrich on January 24, 2012 09:49

  That's because quotas are for the OWNERS of the objects schema, not users operating on these objects.

  Because XXPCK is the owner of the table, it is the user who needs to have a quota on the tablespace that she is.

• Grep, give quotes

  Hi guys,.

  I'm pretty new to Grep stuff, although it seems kind and logical.

  I'm trying to give it the content of the quotes in my paper (am happy for citations to also italic, so no worries to be too smart to try to exclude them)

  The problem comes when I use:

  ".+"

  What makes all the words italic even if they are between two sets of quotation marks, i.e.

  'Quote text' text outside the quote 'Text in the second quote' text outside the quote 'text in third Quote'

  I don't know how to get that, the following do not give the text outside the quotation marks.  I guess that I must seek an odd number of quotations at the beginning of the paragraph and then don't count text between this quote and the next.  Or maybe is there a better way.

  'Quote text' Text outside of the quote 'The text in the second quotation' Text outside of the quote 'Text in third quote'

  Any help would be much appreciated.

  See you soon

  The problem here is that, by default, GREP is GREEDY. When lucky, the operators + and * try to catch as much as they can (still without violating other constraints that you put in the expression, of course).

  In your case

  ".+"

  perfectly matches the entire string, from the beginning to the end... But you can force GREP to use the shortest possible match by adding a single '? ' after the expression of repetition. This should work for you:

  ".+?"

• Flash/PHP/MySQL - send to DB fail using the & quot; : & quot;

  for some reason when you use the character ":" (with quotes) in the input string / / / its sends do not and insertion in the database, but if I do not use ":" it works perfectly fine... At one point, I had a 'Violation' error, but do not know if this is...

  NVM, figured out. Escape() to encode the text in html.

• QUOTA exceeded... even cannot delete

  Hello

  QUOTA exceeded in icloud reminders... tried to make space by deleting completed tasks, but still not the QUOTA EXCEEDED message, so I can not delete the

  See what - iCloud: limits for Contacts, calendars, reminders and bookmarks - Apple Support

• Can I use search or search to locate a comma or in quotes in a text

  I was wanting to use formulas to locate commas etc in text strings. I am new to mac and numbers and I can't find the right way to enter the channel search by searching for commas or quotes. Always get the message in invalid format.

  Is to FIND, like this:

  

  = FIND (",", A2)

  This shows that the comma is the 12th character in the string.

  This assumes that you are using. No, in your region as the decimal separator.

  If you use as the decimal separator so I think that the formula would be:

  = FIND(",";) A2)

  SG

• Remove the exceeded Quota

  I try to erase filled reminders but I get a message saying my 'delete Quota is exceeded' and the application is not running.

  What does that mean?

  Try to connect to your iCloud account, and then sign.

  iCloud: limits for Contacts, calendars, reminders and bookmarks - Apple Support

• Warning quota IMAP but I have cleaned already and its use is very low

  I get a warning of Quota IMAP (101%) on one of my gmail email accounts.
  I read the articles on cleaning and avoid Quota IMAP problems and have done what I can delete and move e-mails.
  But my space usage report shows that I use only 36MB for this account which seems really small.
  (my main Gmail account using 8.8 GB and I do not receive a warning.)

  what I missed or where can I turn?

  Peter

  Gmail will also save all e-mails, both sent and received in 'all mail '.

  Deletion of an e-mail from a folder does not result removes the email in "all mail".

  Basically, all letters, incoming and outgoing are saved in the folder "all messages".
  Labels can be applied to create a visual effect to appear as in other folders, for example: Inbox or one that you create.

  So to delete an e-mail from for example: Inbox simply deletes the "Inbox" label and still leaves the email in "all messages".

  • https://support.Google.com/mail/answer/78755?hl=en

• I have an e-mail returned by the demon with the reason given as "over quota" what does that mean?

  I got an e-mail that is returned by the demon with the reason given as "over quota" that mean?

  Well, most ISPS and web-based e-mail providers have rules in place: some have attachments maximum file sizes, most have maximum rates for the number of recipients/how many emails per day. I had one that had a maximum bandwidth and would not deliver an email until tomorrow if I ended this day.

  So check the terms of your email provider.

• Is it possible I can auto correction of typing quotes to curly (quotes)? I NEVER want the typing quotes. ?

  In Word, I can auto fix typing quotes for the french quotes. Is it possible to do this in Thunderbird?

  I only have a single addon for automatic correction and it does not have punctuation and it doesn't have the ability to recognize a related pair of glyphs.

  I think the answer is 'no '.

  With some hesitation, I would say that if it's so important to you, then compose in Word and pasting it into Thunderbird. But to avoid the unholy mess of code property that would accompany a standard paste of development action in the form, I would say that using 'paste unformatted' and in all likelihood it would eliminate the curlies anyway.

• V 38.3.0 Windows 10... response to the message includes no original quote. The quote is automatically checked in settings.

  When I press on reply or reply to all, the original message is not included. If I select forward, it includes the original message. I tried unchecking and checking the automatically quote composition and addressing and changed the composition of HTML messages to plain. Thanks for your help.

  Sorry, I don't know what is the dash-dash-space sig delimiter.

  http://www.lmgtfy.com/?q=dash-dash-space+SIG+delimiter

• text quoted in the answer page has too long lines

  When I reply to a message, the original message is quoted
  (lines begin with a ' > '), which is very good. The problem is that the lines
  are too long, they do not correspond to the screen.
  I do not understand why: when I type a text, thunderbird
  Properly cut lines - he never goes off the screen.
  And also when I display a text message never goes off the screen.
  In short: I can answer to a message and when I compose my text the original text
  in the quote turns off the screen but then later when I view the email
  (assuming that the email for example was Bcc - ed for me) the text quoted that, before you go

  off the screen can now be seen correctly.
  

  Thanks for your help.

  It does not help if you use Edit > wrap (or use Ctrl + R) when in the compose window?

  If this is useful and could you find disturbing because it happens too often, perhaps the additional format buttons or an another add-on could contribute.

• Can I create a screen saver "favorite quotes" in El Capitan?

  Years ago, I had a PC which allow me to create short (probably 100 characters, not even not at the level of Twitter) quotes as screensaver.  I'd like to be able to do in El Capitan, but don't know how.

  I thought to try to transform the simple text or Word documents in JPEG format and their use in a folder of photos I could choose as a screen saver in El Capitan, but I have no idea how to format a Word document to JPEG format, as opposed to a PDF file.  (1) is there a simple way to create a text-only screen saver (or perhaps to add short text phrases to an existing screensaver program in El Capitan)?  (2) in the case, could someone tell me how to do what I want to do?  Thanks for your suggestions!

  You can create a folder of images of text with Keynote, if you have installed.

  Create a new document, Keynote, then write a single citation per slide.

  Using "file > export" to export slides as image to the folder files:

  

  And the application overview allows to split a PDF document in a single image per page.