Broken USB port does not recognize mouse or iPod.

Similar Questions

• After Windows Vista update, the usb port does not recognize the external hard drive

  My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro M70 - USB port does not recognize the device

  My Satellite Pro M70 has three USB slots, one on the left and two (vertically one above the other) at the back of the laptop.

  The top slot to USB in the back started giving problems. Sometimes, my computer can't see all that I plugged in there. But if I unplug anything - usually the printer or the mouse - the computer will usually see it then.

  What is the problem? Can do nothing about it?

  My operating system is XP. and my laptop is 4.33 year.

  Thank you.

  Hi Mannix,

  Have you already updated the chipset drivers?

  I read in the forum about these questions and normally helps to reinstall the chipset driver. :)

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• MacBook Pro 13 "Retina Display Usb Port does not... !!

  MacBook Pro 13 "Retina Display right usb port does not... I tried to plug in and out still it doesn't then I rebooted my macbook and again inserted the USB, it worked... !! Why this problem is caused? today is the 5th day since I bought my macbook... !! Also last night so he was working in final cut pro that freezes... the keys of my keyboard and trackpad it works do not totally got hung up... and then I pressed my power button after the restart, it was ok... Parachuting also does not work between my iphone and a macbook... say Bluetooth not connected to my phone eventhough after pairing... suggestions and advice? Help me please I am confused and worried... !! It's just the 5th day... !!

  Reset the SMC > reset the management system (SCM) controller on your Mac - Apple Support

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Satellite Pro L10 - USB port will not recognize devices

  Hello

  I got a L10 for 18 months. Under the guarantee, I got a replacement motherboard mounted. Everything has been ok so far. A USB port will not recognize devices, a port is ok, but randomly turns off a device attached to it and comes up with the message "USB device not recognized". The third port is ok all the time.

  Any solutions or suggestions?

  Post edited by: caddy

  I guess there is not enough power on the USB ports and external devices may not work correctly. It is not easy to say why this happens, but there may be a problem of welding.

  I recommend you contact the service again as soon as possible.

• El Capitan USB port does not worked well under Yosemite.

  Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
  Has worked perfectly under Yosemite unfortunately too long to go back.

  The USB port does not work with other USB devices?

  I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.

  http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1

• USB key into the USB port does not appear in 'my computer '.

  Original title:-drive Flash USB port does not appear

  I have laptop Dell A 4 years and cannot use USB ports. My data flash drive lights flash but nothing shows up in 'MY Computer'

  It turns out that there is a problem connecting to the motherboard... so it ' s not worth repair. However, I believe that I can connect to the Internet by the yellow cable supplied with the router. There is also a card I can buy known as PCMIA card that will give me 2 additional USB ports. It's cheap enough to give it a try.
  Once more a big thank you to all those who have offered their advice on this matter. I'm amazed that so many people are willing to give of their time to help a novice

  Terry

• Pavilion S5-1204: USB Ports does not: Windows 7 HP Pavilion Slimline

  Hi all

  Yesterday all of a sudden the USB ports are not read.  I have cameras and use a data transfer cable or a card reader to transfer to the office.  Now they do not read.  Tried the front and back of the usb ports.   However, the optical mouse that uses a usb device works.   I don't understand how the mouse works and the purse strings of data transfer and the readers aren't.

  Win 7 64 bit

  HP Pavilion Slimline desktop computer

  Help!

  Update: I did troubleshoot a HP check and update driver.  The screen messages

  USB root hub: this device does not work correctly.

  The current tab:

  Generic USB Hub (6)

  1 port available

  Power required: 0mA

  Solved.

  I've narrowed the problem to the camera. Very strange. The camera will take pictures and display them on the screen. But something is happening internally where the image will not transmit or transfer it via a usb device.

  I have another device with a transfer device and it works. So it seems I have to buy a new digital camera. BTW, it is a Nikon S2800 - not recommended.

• HP 15-r002se: USB port does not

  I have a problem with my laptop [HP 15-r002se] all three 3 usb ports do not work, or even detect that something is plugged, I tried techniques to conquer the problem by the system of formatting and reinstalling windows 8 32-bit where I found myself without success, because I can't able to get compatible drivers of troubleshooting. Then I go to the usb ports even on windows 7 64 bit does not. and finally, format and install windows 10 64-bit, I downloaded the drivers from hp website, but unfortunately when I run the downloaded software sometimes nothing appears either to the pop-up a message on the error or continuation and sometimes it shows this kind of error after it finished extracting

  

  Finally with the help of pilots pack that I managed to install all required drivers but finally arrived with NO SUCCESS, yet neither the operation of the usb port. Here is the screenshot of my device manager.

  

  Please, I seriously need your help to solve this problem, because I am a student, I can afford to buy another laptop earlier

  Hi @Mustapha_Musa,

  I read your message and please try the following steps. A brilliant work has been done by trying these steps. Kudos to you on this point. It's a problem of clear material with the device. The USB ports are defective, the motherboard should be replaced. you will need to contact HP telephone support on this subject for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  The workaround, for now, is the following: If you have a USB port on the device that works, then you could buy a USB port extender and connect it to the port good work.

  Then you connect other devices to the USB port extender. This way multiple devices may still be connected to the computer.

  Just to say thank youPlease click the ' Thumbs Up 'button to appreciate my efforts. If it helps, Please mark this "accepted Solution".

  Thank you and have a great week ahead.

• Photosmart C4280 All In One: USB Port does not work

  When I try to scan, I get a message saying that the USB port is not installed. It is installed, but I bought a new USB port and still get the same message.

  Hi @MrsQ3,

  Thanks for getting back to me with this information.

  Have you already tried to install the software and drivers from hp.com printer? If you do not try to download the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and drivers available for Windows 10.

  If you have already installed the printer software, try downloading and does not perform the HP print and Scan Doctor. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know how it goes.

  Thank you.

• the printer port does not recognize hasp key

  I recently bought a Dell rebuilt to replace a running xp sp3 which had overheating problems with windows xp sp3.  I am running a previous software (7.5V2 friendly technology FlexiSign Pro) program that requires a hasp on a parallel port key.  I never had problems with the old computer recognizing the hasp key, but when I try to use this software on the new computer does not recognize the HASP.  I think what may be due to the fact that my new computer printer port is configured as instead of the lpt port ecp.  Is it possible that this could be my problem and I can change the port of older style? Any guidance is appreciated.

  Thank you

  Greg

  If the problem really is whether the parallel port in ECP mode, you can switch to EPP mode in the BIOS.  Restart the computer and keep a close eye at the beginning of the boot sequence for the message that tells you what key to press to enter the BIOS (change system settings or similar).  Restart again and press the key when the message is displayed.  You will have only a few seconds.

• HP Pavilion G6-2231TX: usb ports does not completely

  My usb ports are not working properly.whenever I insert each drive was not recognized by the system

  Hi friends,

  Please check with any other pen drive, if still does not work

  then follow the step

  step 1:

  Make the default bios

  step - 2

  update the driver below.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59647.exe