Virtual Firesight Management Center (Sourcefire_3D_Device_Virtual64_VMware - 5.3.0 - 571) inaccessible via the web page

Similar Questions

• The traffic load between the power of Cisco ASA and FireSight Management Center fire

  Hi all

  I have a stupid question to ask.

  Can I know what is the traffic load and the e/s flow between firepower Cisco ASA and FireSight Management Center?

  Currently working on a project, client require such information to adapt to their network. Tried to find in the document from Cisco, but no luck.

  Maybe you all have no idea to provide.

  It varies depending on the number of events reported from the module to the CSP. No event = only health controls and policy changes are exchanged. 10,000 events per second = much more traffic.

  Generally it is not a heavy load, however.

• Access to the Web Page on the local computer virtual

  Hi all

  I hope you can help.

  I have an image of Suse Linux that I run in VMware player that hosts a web page.

  The IP address of the physical machine is 192.168.0.8. The IP address of the VM image network port is 192.168.0.100

  When I'm on my local network of the I can access the web page dedicated to the 192.168.0.100 with no problems.

  However, when I visit a client and I don't have a network, I have run the local virtual machine on the machine but cannot access the web page.

  I have install the virtual machine network as bridged so that it works on my local network.

  Why can I not itself this when I do not have LAN connectivity?

  What I need to change when I'm at a client site and I don't have access to the network and not a LAN access so that I can access the web pages hosted in the virtual machine?

  The whole point of this is that I run the virtual machine when I'm at a client site so that I can demo of the software, but if I can't access the software, I can't demo it?

  Any ideas on that?

  Thanks in advance for your help.

  Dave.

  Use NAT on the NIC of the virtual machine, and then use the IP address that is assigned to the virtual computer by the server DHCP VMnet8.

• Virtual Storage Manager - can't change instant planning time interval with vSphere Web Client

  Hello

  I try to activate Virtual Storage Manager schedules-model for a data store using vSphere Web Client. Everything works fine, but I can't change the time interval of planning of the snapshot. He remains at 12:00 midnight to 12:00 midnight. I can't change it manually or by dragging the bar.

  I tried with IE9, IE11, newer Chrome browsers. And with Flash versions 15 and 13-. Same mistake.

  I've added the URL of Sites you trust with weaker security settings - no help.

  Y at - it a bug or something else I can try?

  I just talked to Dell support on my problem and this is apparently a known issue with local Europe\UK.  The similarity of our problems might be useful - workaround for me was to settle the Locale\Regional from my PC, where I'm doing it in the United States.  Not the time zone or other settings, to control panel, then "Region and language", then on the first tab, 'Format' box should be set to "English (United States).  Close browsers, start again and it worked for me.

  Might be worth a try if you're not already in US format. (mine was in the United Kingdom).

• Is it possible to personalize the web pages of Lab Manager?

  I have a PoC Lab Manager 3.0.1 and something that would be very helpful is to customize the preview (preferably in the world) page to change topics in the Documentation section and Support that would be more relevant to my client - there is a good Sharepoint environment and adding a few best practices/guides (along with local support manuals copies) and changing the 'Support' link for the internal incident logging system. I would like to also delete or at least change the color of, "Please activate SupportLink to allow these statistics" since the text in red is usually not all right, and in this Lab Environment Manager will not send anything VMware.

  Is it possible, or are all the structures of web page hard-coded and locked? I searched the server for specific texts ("get help" 'videos' etc.) with no luck, so I assume the worst.

  Thanks in advance

  Sorry, this is not supported at this time.  I'll file a feature request for you.

• Impossible to center the Web page in the browser window!

  Hello! I have searched and tried almost everything to Center my Web page in the browser window, but it does not work!

  This is the page: www.claudechalhoub.com. I want that page is centered regardless of the size of browser window!

  I have included the following code in my html code:

  < style type = "text/css" >

  {body
  text-align: center; / * For the IE6.
  margin: 0;
  padding: 0;
  min-width: 770px;
  background-image: url(pictures/lastimage.jpg);
  background-repeat: no-repeat;
  background-color: #000;
  do-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
  color: #FFF;
  make-style: normal;
  }
  {#wrapper}
  Width: 770px;
  Auto margin: 0;
  text-align: left;
  }
  ...
  < / style >

  And then I realized:

  < body >

  < div id = 'wrapper' >
  < div id = "ap_text" > "the beauty of the music of Claude Chalhoub, is that it is not 'new' at all. This sounds familiar, even if you have never listened to music Arabic (or classical music) at all. As if it had always been there. It is as natural as breathing. "And it's this great art is all about - what makes the difficult seem easy." < / div >

  ...

  < / div > <! - close the tag div wrapper - >

  < / body >

  I don't know what the problem of not working!

  Any guidance?

  Your background image for the "body" tag contains the image that you used in it also. It's a bad habit. Just use a background image wide 5px and use it in your body background tag. Repeat with horizontally to fill your screen.

  Put your photo in a DIV inside the 'wrapper' div position it accordingly.

  In addition, you used an "absolute" on all items positioning on your website. Their position relative to the tag parent for best results.

• How to center the web page in indesign cs5

  Hello world

  I'm new to this forum and I hope I will get help, because I need

  I made a web page in indesign cs5, export to SWF and generated HTML.

  My swf file looks good, but my html file is not centered, web page is positioned

  in the upper left and I want it to be in the Center.

  How can I put it there?

  Thnx a lot!

  Hresta

  You must apply the margins of the car left and right in the div that contains the site. Given that I'd never use ID for a website that I don't know what kind of HTML/CSS gets exported with the SWF file.

  Bob

• Adding to my last question... To keep a background image in the center of the Web page when the browser is shrun

  How do do that?  What is the CSS that makes this work?

  Centers of the background, even when the browser window is smaller or the screen resolution is less, but the content remains stationary in the center of the page: www.signatureweddingsbyjenna.ca

  Hello Jules

  I think that Nancy replied to your question in the other thread.

  I have the site you give as an example, this is the CSS that applies to this image:

  {body

  background - image: URL("page_images/background.jpg");

  bottom-top position: center;

  background-repeat: repeat no.;

  }
  Then of course, it is applied as the context in which theelement, it is placed in the Center and on it and it does not repeat itself.  It is what keeps the central image on the page.  Also helps is that the page is a centered layout.  In the example page that you gave, they have this:
  #page, closure-blocks # {}

  margin-left: auto;

  margin-right: auto;

  Width: 1000px;

  }

  Set the width is important and defining the left/right margin as it means that the browser will allocate the rest of the available space at each margin evently between the two, or put content in the middle.  The only other thing you do is to set the content of the site to the center using
  text-align: center
  It is exlpained herefully.  The only other thing the site has done is put a bit of image information in another element to make it appear that the background image loops in the content.
  Martin

• Why the add-on Manager creates a new tab whenever I go to the home page?

  When I run Firefox my homepage tab appears with a tab of the Add-ons Manager and a plus sign for the new tab. Whenever I go on a website and then back to my homepage comes ANOTHER tab Add-ons Manager. This apparently will last forever. I got 20 tabs Manager modules showing. The only way to eliminate them is to stop Firefox and restart. Then it starts again. What is the cause?

  I use the latest version of Firefox and 8.1 of Windows on a Dell Inspiron with 8 GB of memory and a hard drive of 1 t.

  Help, please.

  You can have the Addons tab set as one of your landing pages.

  Try to set your homepage again.

• Why the Web page after only the third Center of the screen and not the whole width?

  Using firefox on a vaio z 13.0.1. All the websites I try to access to appear narrow, occupying only the third Center of the screen. Not such a problem with IE.

  Thanks to everyone for the suggestion. Firefox solution for what is essentially a Reso and problem of Zoom is unnecessarily complicated. I switch to Chrome.

• Center Spry based Image slide show on the Web page in Dreamweaver Cs6?

  Hi, I'm working on a website for a client in Dreamweaver CS6: northstarconservancy.org. How to Center a Spry based Image slideshow on the pages? I tried a few options and nothing has been effective, anyone? Thank you, Amanda

  This change in your code...

  for this...

  Then in your css, add this...

  {#slider}

  Width: 500px;

  margin: auto;

  }

• How to make the .swf movie Center on the web page?

  Hello

  I have a question, I created my site and I have the settings of publication to the file swf and html-files and when I open the HTML for my site is on the left. But I want my website to be at the center of the screen, what can someone tell my how to the center of the flash file?

  Thank you.

  Centering is done in html/CSS code to the page.  See if the li k below helps, otherwise just Google 'Flashing Centre in page' and you should find something to help.

  http://www.YouTube.com/watch?v=koRzpSizoFo

• How to stop the web page of the Center eprint opening automatically when ever I open the hp printer assistant

  I just bought an HP deskjet printer 3525 and after setting up, whenever I open assistant printer scan etc, the e-print web page will automatically open in my browser. I don't use print e & it becomes extremely irritating. I'm about to return to that retailer because of this situation, small but very annoying printer

  Oh Yes... I had the same problem but I forgot to mention... my bad

  the solution is...

  1. Copy the url.json file to another location (Office, perhaps)
  2. Then, change the copied file and save
  3. then copy this file and replace the original one in your file assistant hp
  4. Open the hp printer assistant

  I guess access to modify the refused for security of windows 7

  to stop people or programs make changes to files, particularly in the C drive.

  Remember to keep a backup of the file in case something goes wrong...

• Project Captivate Center vertically on the web page

  If anyone knows how to change the HTML code to make a sensitive 8 published Captivate project vertical displays centered on a web page, I would be very happy if you would help.

  Hi Jay

  I hope it is not too late to be of any use to you. I just entered Captivate 8 some time ago and found this annoying problem myself. I'm pretty shocked, there isn't a setting for this in the publication options. I posted another question on the forums about this myself. After fiddling around with the code, however, I did come up with something that works. Changing the code is in a different place depending on whether you are doing a project admissible or inadmissible. This is what is...

  
  

  The General steps (for each type of project)...

  1. Publish the project
  2. Open the "index.html" file in a text editor or code
  3. Replace a small css inline (code below)
  4. Save the index.html file

  Code to replace (to a sensitive project):

  Upward between theTags, there is a ton of content barfed in the function "cpInit()". Find this piece of code within this function:

  id='project_container' style='left:0px; top:0px; width:100%; height:100%; position:absolute; overflow:hidden;'

  Change the properties of this style:

  id='project_container' style='position:relative; top:50%; transform:translateY(-50%); overflow:hidden;'

  Code to replace (for a 'white' project does not answer):

  Always to the top between thetags in the function "cpInit()". Find this piece of code within this function:

  id='main_container' style='top:0px;position:absolute;'

  Change the properties of this style:

  id='main_container' style='position:relative; top:50%; transform:translateY(-50%);'

  I did have the chance to test a fully built project to see if something becomes wobbly at one point because of the position of the absolute by report - div but I don't see something bad happening so far. The table of contents still slides normally and all that jazz. I hope this helps!

• Firesight Management Virtual Center in ESXi version 6

  Hi all

  Is it possible to install any version of virtual appliance Firesight Management Center of vmware ESXi 6?.

  Thanks and greetings

  I have not tried it personally - it may be possible to install.

  However ESXi 6.x is not a supported platform yet. Even with the power of fire (new name for FireSIGHT) recently published Management Center 6.0, the supported versions of ESXi are 5.1 and 5.5.

  The source of this information is the Release Notes:

  http://www.Cisco.com/c/en/us/support/Security/Defense-Center/products-re...