Vista 32-bit home asking for activation.

Similar Questions

• I have the software for the wheel to feed Force Microsoft SideWinder, but I can't install in windows vista 32 bit home edition

  I have a real problem, try to get the sidewinder software to install to my wheel feed Force Microsoft, it sends a message indicating that it has problems of compatibility with the program and stops the installation

  the name of the program is SWGameEn.exe he used to work in XP Pro why used it work in Vista 32-bit Home

  Hi Mike I finally found a program that works with the Sidewinder wheel and Vista, it is only a small program, but it allows you to program all buttons on any controller.

  I'll post a link here little time if you want me too, that way another person might benefit from also

  http://www.deinmeister.de/JCT.htm

  It's all in German I think lol, but it's pretty easy to get out. Just run the program with your gamepad or steering wheel plugged in and press a button and watch the program, if button 1 is pressed then follow him up to the line upward with an empty square (left) and then click on the empty box (you will be asked for a key on the keyboard) press the key that you want to work with the key #1.

  Then to activate the button make sure you click area is pressed next to the inline box keys with line #1-si someone can not understand my instructions, they can send me an email and I'll send them back with pictures that explain it better

  Click on my name

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• Vista 64 Bit Home Premium does not start when a disc is in the optical drive

  I tried to understand this for a long time, but I thought I might as well ask for help.  I use Vista 64 - bit Home Edition Premium and the problem I have is that I cannot restart my machine if a disc is in the optical drive. Specifically, if I have a DVD or Bluray disc in the optical drive (IE a BD - ROM drive). When I restart my computer and a disk is present, the startup process is going past the initial windows screen, but that's how far it goes. My desktop (I don't have a password to connect). Initially, I thought it was a matter of priority to boot but the boot process starts from the hard drive but stops at half way through. Then, I went into the BIOS and removed the optical drive completely from the boot priority list.  But there is no change in behavior. The process stops with the only thing visible on the splash screen is a black screen and the hard drive light flashes and goes out from time to time.  I use this computer as my Home Theater PC and sometimes I have to restart my machine when a movie DVD or a Bluray movie is in the optical drive. I would appreciate any response that can help me solve this problem...

  Thanks in advance...

  There may be something wrong with the files on your hard disk.  We will try to update to see if it helps:

  Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps (I believe you need a disc for Installation of Vista to do that, even if some Installtion OEM disc might work, but probably not all the recovery discs).

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  If this does not work, or if you do not have the disk, try EasyBCD http://neosmart.net/dl.php?id=1 and see if that works and does everything well.  Make sure what you are doing or you could mess up your boot files and you'd be in a lot of trouble.

  I don't know if the problem is even caused by startup files (but it is possible if it is not the BIOS), but you'd better check and if the procedures are followed to the letter as stated there is no harm in trying.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista 64-bit Home Premium Backup and Restore

  -What is the backup program included with Vista 64-bit Home Prem supposed to create backup files in WinZip?

  Hi VanHylant,

  A backup file is a copy of a file that is stored in a separate location from the original.

  The backup file will have a .bkf file name extension. So let us try to uninstall Winzip and see if the problem is resolved.

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  Methods of backup of your files.

  http://Windows.Microsoft.com/en-us/Windows-Vista/methods-for-backing-up-your-files

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Vista 32 bit Home Premium upgrade to Windows 7

  I have been using Windows Vista, 32-bit, Home Premium with success.  Recently, it has been suggested to me that I had to upgrade to Windows 7.  I want to keep, at least, I currently have the same capabilities.  I have a few questions.

  1. because I don't want to back up or modify files or programs, is it wise to upgrade to Windows 7, 32 bit, Home Premium?

  2. in the case, which version do you recommend?

  3. should I download it from Microsoft or do I have to download it also?

  4. If not should I buy in a store?  Could you recommend one?

  5 is it complicated to install?  Do you know a good site that could help me to install it?

  6. Finally you would give a price range that I have to pay?

  I know this has been long, but it seems to be a complex issue.

  Thank you very much for your time and your support.

  Sincerely,

  Jim Nolan

  E-mail address is removed from the privacy *.

  I have been using Windows Vista, 32-bit, Home Premium with success.  Recently, it has been suggested to me that I had to upgrade to Windows 7.  I want to keep, at least, I currently have the same capabilities.  I have a few questions.

  1. because I don't want to back up or modify files or programs, is it wise to upgrade to Windows 7, 32 bit, Home Premium?

  Yes.

  2. in the case, which version do you recommend?

  N/A

  3. should I download it from Microsoft or do I have to download it also?

  The only legal Windows 7 download available is now Microsoft, as Microsoft has stopped DigitalRiver Windows 7 ISO downloads.

  http://www.Microsoft.com/en-us/software-recovery

  But Microsoft only provides these downloads for Windows 7 keys to selling product at retail.

  Microsoft sells more than Windows 7.

  Try Amazon.com., etc.

  4. If not should I buy in a store?  Could you recommend one?

  As above.

  5 is it complicated to install?  Do you know a good site that could help me to install it?

  http://Windows.Microsoft.com/en-AU/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7#T1=tab01

  6. Finally you would give a price range that I have to pay?

  Windows 7 has become very expensive due to its rarity.

  I know this has been long, but it seems to be a complex issue.

  Thank you very much for your time and your support.

  Sincerely,

  Jim Nolan

  E-mail address is removed from the privacy *.

  There is no free upgrade to Windows 7 and not Microsoft Download, unless you have a the retail license /key of product already and I wanted to reinstall...

  http://www.Microsoft.com/en-us/software-recovery

  There was a special offer for this a couple of years back; but this offer has expired for a long time.

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.

• Why do I get ServicePack 4 updated when I only have vista 32-bit home

  Why do I get sevice pack 4 updates for download when I only have vista 32-bit home. I don't understand why. If someone could help, I would be very grateful. Thank you.

  Hi Patricia,

  Usually if there is a problem with the Sql server server there may be damage to the .netframework. Try to run this tool: http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx , and then try again to update the system again.

• Installation of Matlab R2010a stuck at 99% on Vista 32 bit Home Premium SP2

  Original title: installation of Matlab R2010a on Vista 32 bit Home Premium SP2

  Hello

  I have problem when l try to install Matlab R2010a on Vista 32 bit. When l start installation exe move some files and that to stop him... have wire in Procceses (Task meanger) who use the 51% CPU but nothing happen... If l start installation CPU goes to 99% and die. :) So, something that happens in background, but l don't know what and why...

  stats of SIS => CPU: Intel Core 2 duo 2.1 GHz RAM: 3 GB

  THX in advance

  Hi Ttlvscmos,

  1. you receive messages or error codes?

  You can try the installation of Matlab using administrator privileges.

  a. right-click on the installation files and select run as administrator to install the program.

  You can also consult the following link:

  Why I can't install the connector of Mobile of MATLAB on Windows 7 or Windows Vista?

  http://www.MathWorks.com/support/solutions/en/data/1-D63Y7Q/index.html?product=ml&solution=1-D63Y7Q

  You can also get in touch with MATLAB for further assistance:

  http://www.MathWorks.com/company/aboutus/contact_us/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista 64-bit Home Premium operating systems disks

  I bought my laptop with Windows Vista 64-bit Home Premium installed on it.  I've since upgraded to Windows 7.  Unfortunately, there are a few programs that will not work under Windows 7 little matter what I do.

  So, I would try to run a virtual Windows Vista system.  The problem is that I can't find my disk with the operating system of Windows Vista 64-bit Home Premium on it.

  Download the Windows Vista 64-bit Home Premium operating system so that I can burn a disc for a back-up or I can order a drive with the OS on it?

  Thank you!

  You can not upgrade to Windows 7, and then use the Vista OS you used as part of the upgrade to install another (even virtual).

  There is no Vista free download legal available.

  And Microsoft provide no DVD for computers of the brand OEM (Dell, HP, etc).

  Borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Should I to update to Windows 7 or 8 on my Inspiron 530 w/Vista 32-bit Home

  I have an Inspiron 530 w 4 MB of Ram and an Intel Quad Core 2 Q6600 2.4 GHz w/Windows Vista 32-bit Home.  Should what Windows OS I upgrade to 7 or 8.

  I run the upgrade wizard for Windows 8 and received a red x on "network connections Intel (r) 12.4.38.0.  Don't know what that means.  The Windows 7 upgrade assistant came back fine.

  Hi Snowgolf,

  The Red Cross means that you cannot use Windows 8 in your pc. You can have problems with an upgrade. You'd be better off buying a full installation of Windows 7.

• Hey I bought iphone 5, 4 years ago. Resetly I update yesterday suddelly asked for activation ID, so I put but did not work. Before I had to change an e-mail and I put in a new. Now demand for old e-mail and what is incorrect.

  Hey I bought iphone 5, 4 years ago. Resetly I update yesterday suddelly asked for activation ID, so I put but did not work. Before I had to change an e-mail and I put in a new. Now demand for old e-mail and what is incorrect. What should I do? I have new Id and worked, but not with my phone.

  I live in Slovakia and I bought this iphone in Florida USA

  Thank you, Maria Nagy

  Any ideas?

• Equium P200 1IR running Vista 32-bit Home - no WiFi

  I have a Toshiba Equium P200 1IR running Vista 32-bit Home with a wifi problem. The wifi adapter is an Atheros AR5007EG.

  The problem I get is endangered wifi networks and laptop connects to networks I use normally.

  I tried to reinstall the connections and passwords. I know that routers are functioning as my wifi phone can connect to routers, but the laptop will not.

  I removed the battery and reset the BIOS, I removed the adapter from the list of Device Manager and reinstalled, I updated the driver and restarted the laptop.
  I can see some time the wifi router and sometimes I can't. If I can see my router named it will connect to it.

  Sometimes, he will not recognize the router but when I use the Toshiba wifi doctor and run the radar feature, you can see the router but it does not show in the network and sharing Center, although I can see on the radar option.

  Any help would be greatly appreciated.

  Hello

  You update the BIOS?
  Please do if the laptop uses the old BIOS.

  In addition, you must update driver WLan
  You said you did, but I don't know if you used the latest version of m

  Here you can download the latest Wlan drivers.
  http://APS2.toshiba-tro.de/WLAN/

• Adobe CS 6 Design and Web Premium asking for activation whenever I reboot computer (win7 x 64)

  Hello

  Adobe CS 6 Design and Web Premium asking for activation whenever I reboot computer (win7 x 64). Same thing happens on another machine (the same model computer you) with Adobe Acrobat Pro (CC 2015). To make it even more interesting license Acrobat Pro is brand new and have never been used before.

  How can I solve this problem?

  Sincerely,

  Christopher

  Run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

  or

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I have a license for Design CS6 and Suite Web and applications downloaded, but they do not load or ask for activation. [was: question]

  I have a license for Design CS6 and Suite Web and applications downloaded, but they do not load or ask for activation. What should I do?

  It's a Mac and finally got to window that let me enter the license key and it works. I thank you for your response and departure to help!

• CS6 and Premiere Elements continues to ask for activation

  Hello

  I am a system engineer in a school. We have a license to Site K12 for CS6 and we bought about 30 versions of single license of elements of Prime Minister through authorized dealers. I have deployed CS6 a few years ago on our old PC by installing the software on a single computer and cloning then the pc 30 times with CloneZilla. That has worked well.

  A year later, I repeated the procedure on the other 25 computers. No problem.

  Last summer, I did the same thing to replace 30 PCs that I had cloned the first time. Since then, I have to activate CS6, again and again once, which indicates a trial version. Also the other classrooms with 25 pc's started asking for activation after 2 years without worries.

  In October I installed Premiere Elements on each individual computer one by one. And that went well for a few months but then all of a sudden PE began to request activation. My colleagues make me crazy with their remarks and their concerns.

  So far, I have tried to activate CS6 by creating a file for serialization with the adobe application manager. When I run the file and restart the program I'm invited is no longer for activation... for a while.

  There is no way of knowing what device invites you at the moment. It is random. Sometimes it's just a camera, then all of a sudden there are 3-4.

  Help, please

  Maarten

  Hi Martin,

  Adobe Premiere elements 12 (single license) requires connection /activation if you installed individually, however, you can remove the sign window using Adobe provisioning toolkit

  If you have to PRE 12 Adobe volume licenses. Please visit the link below to find the workflow.

  First items 11 and earlier versions to deploy. Windows

  Thank you

  Ashish