Vista 64 Windows will not update

Similar Questions

• Windows Vista Home Basic will not update, System 5 error, access is denied.

  My windows will not update. Microsoft fixit tool will not install on my machine. When I try to reset the updates manually I get the error System 5, access is denied.

  Hello!

  This link may be useful
  http://support.Microsoft.com/kb/555644
  Thank you
  Makoi

• My windows will not update, I get a 80072ee2 error code?

  My windows will not update, I get a 80072ee2 error code?

  I run Vista, and I know there have been some problems with updates in the past, would be Vista the reason why I'm getting this error?

  See you soon

  Kim

  If Windows Update error 80072ee2 during updates, you may need to add the addresses of websites which Windows Update downloads updates to the exceptions to your firewall or 'green list '.

  To add the Windows Update Web sites to a firewall exceptions list

  • Windows Firewall ships with this version of Windows and should already include these sites in the exceptions list. If you are using another firewall, see Help for the software publisher to see how to add these websites to your firewall exceptions list:

    • >

  If the problem persists after these steps, see this

  http://support.Microsoft.com/?kbid=836941>

  UTC/GMT is 15:13 Wednesday, February 1, 2012

• Windows will not update - "the location where updates WIndows stores the data changed.... »

  original title: windows will not update - please help

  I get the message "where Windows Update stores data has changed and should be repaired" How can I change this so that I can update my computer?

  How to reset the Windows Updates components?

  http://support.Microsoft.com/kb/971058>

  Download and Save the fix it 50202 from the page above.

  Close all the open browsers and programs prior to execution of the fix it.

  Since the downloads fail, when run you the fix it choose its default mode when you run it the first time.

  When he finished, check if download updates now.

  If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 19:07 Monday, December 26, 2011

• Vista Windows will not update

  I have windows vista 32 bit on my Toshiba laptop. I recently reset back to factory settings using a disc of resettlement. Now she will not update. I was check updates leaving work for a few hours and it does not find all that it just keeps check found nothing. There is no error message it is just stuck updates. It says last update installed never and never last audit. It just seems to be stuck looking for updates.

  Try the following: download and install all the missing updates mentioned in the table above to this page:

  http://Wu.krelay.de/en/

  These are difficult to manage for the client to update. Set never 'Find updates' automatic updates and reboot before.

  Best regards, VZ

  Ty so much, it was long to apply, but ultimately it worked!

  I looked for a solution for months. My update of Windows vista displays 153 updates. He was just looking for months until I did this: D

  great work! New Ty

• Windows vista family premium will not update

  Hi, I currently have a problem trying to update windows. I have windows vista Home premium sp2 and today Update icon just says that windows cannot check the updates. If I select "check for updates", the system seems to be verified but nothing happens. I have been round in circles on the shooters of microsoft problems and also tried ms 'fix' and a system restore obsolete MS essentials, which is not updated. I scanned my laptop with essentials and malware bytes without any display problem and there is no error codes displayed when I try to update. I'd appreciate any help, thanks...

  Type of race or cmd, try: services.msc services.msc in msc, scroll down to the windows installer, double click it, the value

  "auto-start" start service, closed, next scroll to the update of windows, do the same thing, closed when thru.

  More edit youre/firewall exceptions, allow the browser youre using internet, change for others, as well as change

  components of Windows, grayed out of medium boxes, the service is not running... Another option, use MBSA

  It checks the operating system for the necessary software updates, get that here.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=7558

  Its probably the best utility microsofts.

• Vista Pack 2 will not update stays at 0

  I have problems with Windows update. WINDOWS VISTA HOME BASIC SERVICE PACK 2.  When I click to download, the download of updates window opens but it stays on 0 and the little green line moves very slowly. Nothing it downloads just rest to 0. I tried these suggestions from the Community Forums http://answers.microsoft.com/en-us/windows/forum/windows_other-update/error-code-80246005/94a9434b-948c-4183-986e-ddf062724ae7?page=2&auth=1

  1.

  "C:\Windows\System32" and then find the folder 'catroot2' and just right click and go to properties and there you will see that the matter is "write-protected" to everything that you need to do is take this clear! When I went there the read only box was not checked, but it was lit in blue. He said read only (applies only to files in folders), I tried to disable the checkbox, but I still couldn't download updates. When I checked back just filled blue box.

  2.

  System and Maintenance > administrative tools > Services > Windows Update > restart.

  I struggled with that. I got a message saying it could not stop in a timely manner. Then, there was no option to restart so I restarted the computer and then restart update was available so I clicked it.

  3.

  Cryptographic Services > restart

  Click on restart

  Still no go

  Thank you for reading this.

  Well, I have solved my problem. I am a person very not techno, but I wear what I did in case it can help others. I had my windows, the value of the manual update. I switched it to auto update and wham, when I hit the button in the Windows Update window, download started! Not sure if it was to be on automatic, or just the switch from one to the other has made the round. Who knows, computers are the ultimate mystery. I went to control panel > Security Center > and passed to the automatic update.

• Windows will not update

  My computer will check for the updates, and then when I go to "install updates and then closed" update screen remains the same since more than 6 hours and not update. It is common, and so I have not been able to update my computer for awhile. Is there a way to make this work?

  Hi taylor_olver1,

  Welcome to the Microsoft community newsgroups.

  I suggest you to visit the following links to the Microsoft Support KB Article:

  How to reset the Windows Update components?

  http://support.microsoft.com/kb/971058 - run Microsoft Fix

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  http://support.Microsoft.com/kb/906602

  If the problem persists, I suggest to download System Update Readiness Tool for Windows 7 from the link below and check the logs and back to the rear to correlate any further on this issue.

  http://support.Microsoft.com/kb/947821

  The system update tool creates a log file that captures any issues that the tool found or fixed. The log file is located in the following location:

  %SystemRoot%\Logs\CBS\CheckSUR.log

  %SystemRoot%\Logs\CBS\CheckSUR.persist.log

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,

  Vijay KKS [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• KB25844146 & KB2620712 are updated for Vista - "isntalled windows is not updated version"

  original title: KB25844146 & KB2620712 are updated for Vista. Fails to install each timed

  Updated repeat myself that kb25844146 & KB2620712 are updates for Vista Home Premium fails to install every time. Bulletin says its for XP. Installation downloaded and tried of puter is back with "windows installed is not version update". Have Vista home Prem SP2/32-bit. Using trend micro security. Help?

  Hello

  1 did you change on your computer?

  2. how you try to install this update?

  Method 1:

  I suggest you to reset the windows update components and check.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  I also suggest you to see link and check.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  I also suggest you perform the clean boot and then try to install the updates and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

• Windows will not update today. When I started to date, it will not show. What's wrong. Updates is no longer for IE 11, windows 7

  Are updates for IE11, windows 7 stopped?  Please let me know.  I am very angry.

  Updates have not stopped.  They will not stop until January 14, 2020.

  Many people find very slow Windows update.  Don't bother not to try the steps suggested above, just let Windows update keep trying without any interference.

• Windows will not update, repair corrupted files, refresh or reset. What I'm doing.

  Heyo. Im running windows 8, with about 2000 (I think) corrupted files that it contains. /sfc scannow does not fix any of them. /DISM / /restorehealth/cleanup-image online doesn't solve all these either. I can't update or repair my laptop due to files is corrupt, and all updates (about 52 GB worth of updates accumulate) do not install. I need to solve this problem, because I want to sell this laptop, it is in perfect condition except for these problems. I tried hundreds of ways to solve this problem, and none of them worked. Even tried installing the trial evaluation copy Windows 8.1 to reset my pc, but not even that would install. IM in need you guys. I'd love any help that I can get and will be willing to give something (other than money) if requested :)

  Laptop comes with windows pre-installed 8. Need update windows 8.1 update, but it does not.

  Thanks in advance.

  Seems to me that your best bet is to contact your computer support and request a set of Recovery Disks.Note that there is usually a small fee for these expenses. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• New Microsoft Windows 7 Pro 64 workload on a Folio HP book - Windows will not update even after running the tool

  I received a book of 13-2000 HP Folio damaged software.  Had to reload Microsoft Windows 7 Pro 64.  Windows is not the updates even after running the Microsoft 'tool' and 'fix it tool.  What is the last manual way to solve this problem.

  What is the last manual way to solve this problem.

  The last manual is to install the latest version of the Windows update client.

  https://support.Microsoft.com/en-us/KB/3161647

  Best regards, VZ

• My windows will not update. It indicates that the service is not running.

  Updated Windows cannot currently check the updates because the service is not running.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• I tried the procedure to treat the error 8007005 - I followed the steps with the subinacl. Download and return to zero from Notepad back - all pasted and copied correctly and always my windows will not update. Please tell me what to do!

  I followed the tips you posted - downloaded as it is stated and it still does not work

  Hi Dhirasantadasa,

  Thanks for posting on the Forum of answers.

  Try the location in the Microsoft Download Center and download and install it from there.

  If failure repeated, trying to get the update in Mode safe mode with network by following these steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  2. click on the Start button, click the arrow next to the button lock and then click restart.

  3. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  4. in the display Advanced Startup Options , use the arrow keys to select Safe Mode with network, press enter

  5 sign in your computer with a user account with administrator rights.

  Posted by Brian

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You had to do a system restore, now my windows will not update

  I had problems with the 10 of Windows Update causing a blue error screen permanently.  I tried to do a "reboot of the PC" to correct the error and it would not be completed even when left for 2 days.  I finally had to restart my computer and press f8 to not get stuck in the Windows Update screen.  With no system and no other available option, it was suggested to me to do a restore of complete factory restore points.

  I did the restore and now I have even more questions.  My windows update does not work, I update of windows troubleshooting, but it does not work and my computer says always "looking for updates" and updates are never downloaded.

  My fan is running continuously since I did the restore to factory, and my CPU usage is 75 to 90%, even if I did not open any programs.  Norton told me that Microsoft is responsible for the high CPU usage, but I don't know what to do about it, because I obviously don't want to disable Microsoft.  I'm not sure how to upgrade my Windows at 10, or if I'm still able to now...  Which sucks since I had to do due to the problems caused by Windows 10 programming initially.

  Another update of the issues, I got zero problem with a feature of my computer before resetting.  Any help you could give me would be greatly appreciated.

  My computer is a HP Pavilion g7-1320dx laptop, and bought in 2011.  Please don't tell me to get a new computer... It's definitely a software problem.

  Windows 7 update problems? First read this.

  :)