Vista does not not in front of the Welcome screen
Hello, I installed Norton 4.0 and it ran yesterday on my PC, and this morning when I came to start it, it won't load up Vista past the Welcome screen. The screen is a blue baby solid. I could go in safe boot mode, but my programs do not run here. Need help please.
To perform a system restore, please see the following article:
Tags: Windows
Similar Questions
-
Windows Vista does not. on emachine 64bits. the Welcome screen does not
No problem yesterday, ongoing enforcement don't slow this morning, decided to restart. and the Welcome screen would not fill. the system repair when it launched, but still nothing...
No problem yesterday, ongoing enforcement don't slow this morning, decided to restart. and the Welcome screen would not fill. the system repair when it launched, but still nothing...
Hey Sparky9404
You can try a system restore and a layout of a disc repair service
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable
Contact the computer manufacturer and ask them to send vista recovery discs
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
Walter, the time zone traveller
-
Windows Vista does not start, turns to a blue screen error 2203
original title: Windows Vista does not start, turns to a blue screen HELP PLEASE!
Help, please! So I'm panicking here, just yesterday, I tried to download the update to Itunes, and it did not work. So I followed the instructions and uninstalled the program first, but one of the applications does not uninstall correctly. I thought I could just substitute with the update and replace. The error code was 2203.
So I thought it was right after the download all itunes thing, and when I came back to check on the download, the screen turned to this black thing with words on this subject. I decided to force closing down by pressing the power button. Now everytime I turn on the computer, it leads to the screen saying 'windows is loading files', then this blue screen with a very large arrow (the mouse). I tried pressing the F11 key and stuff, but I have no idea what to do. PLEASE REPLY AS SOON AS POSSIBLE, REALLY NEED A COMPUTER!
"I tried to do the second option, because the first really helped."
Something works, or it doesn't work regarding: "really helped."
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I'm sorry, but I don't understand where the procedure of ISO part 2 stops.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You may be interested in this:
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
See you soon.
Mick Murphy - Microsoft partner
-
By pressing the home button does not take me to the home screen of iOS 9.3.3
I have recenly updated upgraded to iOS 9.3.3 and I noticed that pressing the home button does not take me to the home screen. The only way to get there is by using the creature of multitasking. (double pressing the home button) Also, some applications seem to freeze if turn my phone off and then turn it back on, or when I access it via the multitasking function. Can someone please help?
Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.
If a force restart does not help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:
-
After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password. The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '
(the system is running pre - SP1)
Hello
Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135
Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.
-
Updates do not install, Sections of Vista does not and cannot start the Audio Service
I try to install the updates on windows update but important as the service package 2 do not work, they start then stop and say failed code "WindowsUpdate_80070643"
boxes keep popping up saying some files are damaged or not installed properly and that I should reinstall as a file call... system32\AVRT.dll. Windows Media is not no longer works.
My Audio service is not running, I'm not sure that there is a problem in microsoft windows but the button to switch on the audio does not, and a box pops up saying it does not yet have another pop up says that everything works.
any help? Please
Hello
a. updates have you tried to install?
(b) button to switch on the audio of your computer are you using?
c. what exactly happens when you try to run any audio/video file?You can try the steps outlined in the article below and check if this help.
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643For audio problem you are trying to run the troubleshooter which may help. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.
1. open the troubleshooting of Audio playback by clicking the Start button, then Control Panel.
2. in the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on the audio playback problems. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-TroubleshooterYou can also try to update check you and sound card driver if it works. The article below will help you do.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyAlso, check if the following services are set to automatic.
a. Windows Audio
b. Windows Audio Endpoint BuilderHere's how:
1. click the Start button, type services.msc and press ENTER.
2. go to any services mentioned above at the same time, right-click on it and select Properties
3. click on the tab general, select automatic for startup type. Also click the Start button, if it is not started.
4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.After return to that exact error messages we can help you better.
Let us know if it works.
Kind regards
Umesh P - Microsoft Support -
Auto-Sleep does not work then in the lock screen
As the title says, I set automatic standby after 30 minutes of idle time of the computer, but it only works when I'm on the desktop, if I'm not connected (lock screen), auto sleep does not work, how can I solve this problem?
Hello
A power plan is a collection of hardware and system settings (such as the display, sleep, etc.) who manages the way your PC uses power. Lock screen the console after the deadline option must be added to the advanced power settings.
Change power management and check.
Power plans: frequently asked questions.
http://Windows.Microsoft.com/en-in/Windows/power-plans-FAQ#1TC=Windows-8
-
File not found error in the Welcome screen
Help please!
I have the exact problem described below, but do not have a folder with the same name as the volume created on the volume. Please can anyone help - I have tried everything. This problem happened when I upgraded to Fireworks CC!"At the launch of Dreamweaver on your Macintosh if your home screen does not load and you see an error"File not found", please check if you have a folder with the same name as your volume created on the volume. For more information about this event through the pdf document attached. Other dreamweaver dialog/panels that will be empty because of this problem are Jquery color chart, Adobe Edge Webfonts tab in the dialog manage fonts, dialog error W3c information, dialogue externalize Javascript and svn revert dialog. After having made changes indicated in the attached document, please check all the dialogues/panels affected to confirm that everything is working as expected. »
Thank you
This problem has been resolved by renaming current Martin of the Volume of work. The reason to get the "file not found" error in the case of Martin is because there is a folder inside the current workload that has the same name as the Volume itself (the name of the "system" folder. Please refer to the screenshot above).
@cabolivar, can you please check if you have any folder in your root folder which has the same name as the name of current workload? If it's confusing, please post a screenshot as Martin. Try out us and solve it for you.
Thank you
DBC
-
create dvd Windows Vista does not burn, saying that the disk is not writable
WINDOWS DVD MAKER on VISTA. Don't burn the disk. Teling guard me drive is not a writable disc, but I know that it IS writable. I dropped the slides, yet will not burn. I gave up the video, still will not burn. I gave up the audio, still will not burn. I tried to burn with a single (audio, video or slides) and still no combustion. Can anyone help?
Disable all filters may be worth a try... see the following article:
How to burn DVDs with Windows DVD Maker
http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
(scroll down for...) What to do in case of problems)Maybe you have a problem with the hardware with the optical drive itself.
Are you able to burn DVDs using other software?
The following free DVD creation software can be worth a try:
(FWIW) It's always a good idea to create a system
Restore point before installing software or updates)DVD Flick
http://www.videohelp.com/tools/DVD_Flick
(the download is: "dvdflick_setup_1.3.0.7.exe")
(Download from (direct link) is the fastest).Save the file to your desktop or a folder on your
hard drive and install from there.Be sure to read the Guide:
http://www.dvdflick.NET/Guide.phpTutorials:
Tutorial DVD Flick
http://beginwithsoftware.com/videoguides/DVD-flick-Guide.htmlBurn any Format video DVD PC
http://www.freevideoworkshop.com/dvdflicktutorial.htmAVI to DVD with DVD Flick Guide
http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.htmlTo create a video DVD base that should play in most
free-standing DVD players... try the following...First... read the DVD Flick Guide to familiarize
with the program.Open DVD Flick and insert a blank DVD in your drive.
If the window of Autorun from your computer... just close it.
Click the project settings button and check... Video /.
Target format... residents United States... Choose... NTSC /.
Accept.The title button left click Add and navigate to your
Video clips and select the ones you want on the DVD.You can have by selecting one and then use
the up and down buttons.Left click on the button create DVD / OK / Yes / Yes.
Please wait while the DVD is created.
When the text "Completed successfully" is displayed you
DVD Flick can close. Now you can eject your DVD
and play in your DVD player.At some point you might want to buy more
software advanced as Sony, Cyberlink, Nero, Roxio,
Ulead, etc... but at least it is a start.Good luck.
-
New HP 8620-Pro does not appear "front to the rear/back to front" option
I just installed an OfficeJet 8620. Preferences is not showing an option to change the printing order rear etc.. I talked to HP tech support, and I have uninstalled and reinstalled the software - not good. I restarted my computer. ?????
Hello
Thank you for reporting the issue. I feel very sorry to say, the function of print command is not available for Officejet 8620 because it uses the last simplified driver.
The solution is to use the old driver as driver 8600 return.
Follow step below and choose the 8600 driver when prompted.
Hope it helps to access the order of printing functionality in 8620
-
Hey guys,.
I have a HP HP Elite desktop pc. 570 T.
After upgrading the bios of 7.11 to 7.15 because of start-up time notable even if I use a ssd for the file system, I'm stuck at startup. I tried reseting bios using the jumper, but it isn't working and I removed everything except a 4 GB ddr3 and the problem still persists.
Help, pleaseUpdate:
I removed the CMOS battery and re-installed and everything works well -
I just restored back to factory settings and it was working fine until I loaded Windows live messenger, Microsoft Security Essentials and Sony Picture Utility. After that he stopped begin again, so it can be used only in safe mode. I downloaded all the drivers and updates available on the dell site. Any suggestions welcome please!
If you did a restore to the factory settings and you still have problems, there may be another problem that caused the problem in the 1st place.
Uninstall programs > reload one at a time > find the problem.
And look to see if a trial anti-virus came with the Dell recovery process.
You must have AN antivirus installed; otherwise it may CRASH.For Startup Repair Help, make a record of Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Unable to start before the Welcome screen - error Code: 0 x 00000050
original title: can not go beyond the Welcome screen, or the safe mode works - Vista
About 2 days ago I received the 'blue screen of death '. I tried to connect to the main user account, but the screen would not go further than the Welcome screen. I then tried to open a session through safe mode, but that no longer works. After a few tries to connect to my user account, I tried to log in through the guest account, which has worked. The guest account has worked as it should, I was also able to use the internet. After that I tried to connect it to my main account again, but it still does not work. If anyone can help me with this, ID really appreciate it!
Here's what I got on the blue screen of death:
STOP: 0 X 00000050 (0XC084A5F1, 0X00000000, 0X00000000, 0X826C1498)
Data collection for the crashdump...
initialization of the disk for the crashdump...
Dump start for the physical memory to disk: 100
Total physical memory dump.
If this does not resolve the problem: Please reinstall your copy of windows vista completely
Depending on the symptoms, it is very likely that this problem is caused by a conflict with third-party drivers or services. If you have a back up of all your data, please reinstall the operating system. A new installation of Windows Vista is always an effective way to solve such a problem. After formatting the hard drive and reinstall Windows Vista, we will obtain a new installation of Windows Vista. It is more stable than the current system.
I look forward to your reply
If this post can help solve your problem, please click the 'Mark as answer"or if you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Satellite A200 - Vista does not and only the mouse works
I have problem with Windows Vista SP1 on A200 (PSAE6E).
After the recovery of the DVD attached to computer system Vista laptop and running other programs sometimes not respond. Hard drive also stop working. One job of the mouse and the cursor moves on the screen, nothing else. ALT + CTRL + delete not work too only solution is hard power off by pressing and hold the switch.
Before recovering the system everything works fine. I noticed this Vista product key does not match that of the sticker. I have not changed key and no one else do not have access to my laptop, hard drive that is encrypted by TruceCryp.
There is no viruses or Trojans in the system (verified by Avira free antivirus and HijackThis), all updates are installed, only one material error with I noticed his first bad block on the hard disk.Hello!
Have you tried an external keyboard on the laptop? Maybe the internal keyboard is not working properly and so you can not use CTRL + ALT + DELETE.
The laptop is not completely freeze because you can move the cursor.
In addition, what programs have you installed on your laptop? Maybe these software applications cause this problem.Furthermore, you reinstall Vista using the Toshiba Recovery disk or the disk of Microsoft? Because you have questions about the product key on the underside of the laptop and this key belongs to the preinstalled version of Vista. It's an OEM key and you can't use it with a disc of Microsoft.
> only material error with I noticed his first bad block on the hard disk.
I think you should swap the HARD drive as soon as possible. Back up your data immediately.
And this is perhaps the reason for the problem... Who knows? :|Good bye
-
Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s
Hello
I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.
Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.
Hello
The CD/DVD drive needs no special drivers!
Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)Simply said, the Vista should recognize the drive without any problems.
A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?
There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
It of necessary to update the registry entry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}1. click on the start menu.
2. If it is a Vista machine in the search box type regedit without quotes.
3. look for the registry key mentioned above.
4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
5. restart Windows.
6 let me know if it works.
Maybe you are looking for
-
Why did FF open image in a new tab with focus and black background?
Whenever I used to open image in a new tab, it would always appear in the upper left corner, with a white background. Since my upgrade to 11.0, it is now focused on the force with a black background, I hate. How can I change this?
-
Can I move files between Vista and XP
Hello My pc has XP and my new laptop Toshiba Vista.In the future I'll have to use work files from my pc to the Toshiba...This will cause problems if I move between the 2 OS? Thank you
-
I have a string of arbitrary length - say, 1AB1C0 - normal format. I would like to have a function that takes this string in and generates the same accurate, but in hexadecimal characters. If the entry will read 1AB1C0 in the normal string format, an
-
Linksys WRT AC1900 Wifi Shut Downs
I have a Linksys WRT AC1900 Dual-Band router and it used to work ok but now wifi works after after a restart or deactivate/reactivate but after a random time, it stops working but it is still connected according to my device. It's really annoying an
-
password check failure fatal system error stopped CNU0112NMQ
Please help me out here the password check failure fatal system error stopped CNU0112NMQ