Vista does not start, go straight to the Startup Repair / can not solve the problem

Similar Questions

• Vista won't start and the startup repair can't find any problems

  Have a Dell Inspiron under Vista 64 bit, which does not start. I have inserted the re installation DVD and ran the Startup Repair which could not detect a problem.

  Diagnosis and repair are the following

  ----------------------

  Managed last start: 2010-10-23 21:12:44 (GMT)

  Number of repair attempts: 1

  Details of the session

  -------------------------------

  System disk = \Device\Harddisk0

  Windows directory = C:\Windows

  AutoChk run = 0

  Number of root causes = 1

  Test performed

  ------------------------------

  Name: Search for updates

  Result: Completed successfully. Error code = 0 x 0

  Take time = 0ms

  The test is performed:

  ------------------------------------

  Test the disc name: System

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  Name: Troubleshooting disk

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 218ms

  The test is performed:

  ------------------------------------

  Name: Metadata for the drive Test

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 62ms

  The test is performed:

  ------------------------------------

  Names OS test target

  Result:

  Completed successfully. Error code = 0 x 0

  Taking time = 188ms

  The test is performed:

  ------------------------------------

  Name: Checking content Volume

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 140ms

  The test is performed:

  ------------------------------------

  Name: Diagnostic Boot manager

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 78ms

  The test is performed:

  ------------------------------------

  Name: Diagnostic log for the system startup

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 16ms

  The test is performed:

  ------------------------------------

  Name: event log diagnosis

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 530ms

  The test is performed:

  ------------------------------------

  Rated: Internal audit of State

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  The test is performed:

  ------------------------------------

  Name: Start-up condition Test

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  Root cause found:

  -----------------------------

  State of the start indicates that the OS booted successfully

  But the laptop still wont start I tried to run chkdsk/r from the command line and was unable to do as he says Windows cannot run disk checking on this volume, because it is write protected. I don't know what to do now anyone no matter what ideas thanks in advance.

  Seems odd. Startup Repair should have solved the problem.

  Have you tried new reboot running?

  Give it a shot...

  Any chance that you have a "backup computer?

  Try to do a full restore of the PC.

  See how it goes...

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.

• Defender of Windows (windows vista) encounter error: 0x800106ba every time I allow. How can I solve this problem? Thank you. __

  I tried windows defender (windows vista OS) activation that was turned off but there is no respondl. Instead, I get an error 0x800106ba. I hope someone can help me with this problem. Thank you.

  Hi larz_ltd,

  1. did you of recent changes on the computer?
  2. do you have security software installed on the computer?

  Method 1

  Check if the Windows defender service is running on the computer.

  1. click on Start, type services in the start search box, and then click Services in the programs list.
  2. If you are prompted for an administrator password or a confirmation, type your password or click continue.
  3. double-click on the Windows Defender service and then in the box type of Startup , click Automatic.
  4. click on OK.
  5. make sure that the service is set to Automatic and started.

  Method 2

  See the Microsoft article below as well as try step 4 and check if it works.
  Error message when you run Windows Defender: «Error 0x800106ba»
  http://support.Microsoft.com/kb/931849

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Run the utility Chkdsk does not solve my problem. What should I do next?

  I'm running an Excel 2007 worksheet by using the extensions both on a zip drive .xls and .xlsx.  I tried to open the two files on my PC at work, using Windows XP SP2.  I received the error message that "Excel cannot open the file because the file format or file extension is not valid.  Check that the file has not been damaged and that the file extension matches the format of the file. "I ran the utility twice using the following process: desktop > click the drive where the file > properties > tools > check now > will search for and attempt recovery of bad sectors.  When the disk check process is completed, a dialog box appears that reads "check disk is over."  No exit code was given at the end of each race.

  What should I do now?  BTW, I ran the Recovery Toolbox for Excel.  Read message "the file or directory is corrupted and unreadable.  Please run the Chkdsk utility."

  Thank you

  Nathalie

  Yogi,

  You should always start your own thread, even if you think that your problem is exactly 'the same' as the issue raised by the original question.  After all, if you have had exactly the same problem, you should be able to use exactly the same solution and should not be asked.

  The data retrieved by chkdsk may or may not be usable.  The simplest data - for example, a plain text file - the more likely a file retrieved will be usable by the appropriate application.  More complex data - such as files created by Excel, Word and Powerpoint - may lack the essential elements of the formatting of the data that can make the unopenable file.

  That said, you need to rename a data file retrieved with the extension (3 or 4 characters after the dot) appropriate for the application you want to use with the file.  For example, if you see a file named Dec12Letter.chk, and you know that it is a Word file, rename it to Dec12Letter.doc.

  For Excel files, use .xls and Powerpoint, use. ppt.

  If you are using Office 2007 or 2010, use 4 letter extensions: docx, xlsx, pptx instead.

  You can also consult: http://www.ericphelps.com/uncheck/ or other utilities of this research: http://lmgtfy.com/?q=recovering+files+from+chk+files

• I submitted a problem (the No. URL window) and in the response email, I clicked on the link that says "no, this does not solve my problem" but when I tried to put the actions that I took (which were unsuccessful) I get error "Must choose the subject line"

  I did the "Restore Default Toolbar" without success. I've updated my Java without success. I uninstalled HP Gizmo web printing which the Add box it says incompatible with Firefox 3.6.6 - and I still have no back arrow or window URL. I guess I'll have to go to the Chrome browser because I refuse to use MS Explorer. I enjoyed Firefox while IT WORKED, but if there is no window to the URL, it is useless.

  This has happened

  Each time Firefox opened

  today

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729;. InfoPath.2; .NET CLR 1.1.4322; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

  The URL/address bar and previous/next buttons are both on the Navigation toolbar; See below.

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
  Turn on/off the menu bar is a new feature in version 3.6.
  (~ ~ Red: Linux and OSX see ~ ~: what happened to the file, edit and view menus? )
  Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M
  Windows method 2 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar.
  The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).
  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).
  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars
  How to customize the toolbar

• TB is broken 'check for new messages', never find them. I followed the instructions in "re-indexing", he has been re-indexed, who does not solve this problem, any ideas?

  Same as above, I've changed my email, because I can't get it w / TB now

  Start Windows in safe mode with network and see if Thunderbird works ok then.

• Can I uninstall Firefox if I don't like it or it does not solve the problem of ware ad that I have with IE 8.0?

  I have not yet installed Firefox 3.6. Can I uninstall it if it does not solve my problem of security (to be balanced of the ebay login page to a page of nonsense asking me to name, map of credit etc.) on IE 8.0.

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0 .NET CLR 1.0.3705 .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

  Jim, Yes, Firefox can be uninstalled just like any other Windows application can be uninstalled.

  See Uninstall Firefox on your computer.

• Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

  original title: Halo 2 for windows vista

  Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

  Hello

  Plase make sure you have the latest version of the GFWL Client installed:

  http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx

• Windows Vista does not start upward, with success since the closure complete

  Hello world

  I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.

  I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".

  So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.

  Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.

  Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.

  If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.

  Thanks in advance!

  Hello

  4-5 hours to do a startup repair is too long.

  Often you get better results if you a using a DVD of Microsoft Vista startup repair.

  Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Vista does not start after I disabled the service DCOMLauncher

  Hi all.   I really hope that someone can help me with this, because I can't use my computer at all, and I have to use a notebook different to write this post.

  The problem: Windows Vista does not start with the normal settings or Mode without failure.   To be more precise, after Vista starts, he has only a black screen and a limited mouse functionality.

  The background & problem: I use Windows Vista Home Premium SP 2.   I have disabled the DCOMLauncher Service using the program Autoruns from Sysinternal.

  What I tried: I tried to start Vista in Mode safe with no result.

  Thanks to all those who are trying to help me.

  When you choose Safe Mode choose last known good startup.

  As long as your subsequent boots are deemed unsuccessful, which is perhaps not the case, this will start the configuration before using Autoruns.

  Safe Mode command prompt works?

• Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

  I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

  I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

  I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

  Vista does not start at all, not in either safe mode.

  I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

  I'm at a loss and helps woukld be appreciated.

  Hi James,

  Ø are you using the correct version of the Vista disc to run Startup Repair?

  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

  A. Insert the Windows Vista installation disc.

  B. restart your computer.

  C. Si you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  D. choose your language settings, and then click Next.

  E. click on repair your computer.

  F. Select the operating system you want to repair, and then click Next.

  G. in the menu system, SelectMemory diagnostic tool Recovery Options.

  Once scanning is complete, check to see if the problem is resolved.

  Access the link below to learn more about Windows recovery options in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

  You can also contact Dell support and check if you need to replace any hardware.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista does not recognize my dvd ram drive, or a drive__Windows hard usb cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Error message when you open Device Manager and clicking on the dvd player. Drive does not appear in the window 'computer '. Max_devices downloaded, but it couldn't fix the problem.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Vista does not start - only Safe Mode

  Hello

  Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

  Press F8 all turn the laptop.
  Choose the first option: by computer repair and try to repair the operating system automatically.

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• my vista does not start! Help!

  Vista does not start on my computer compaq laptop. After a vista update automatic :(

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• How to display a thumbnail view of pictures? My vista does not list the thumbnails in the dropdown display menu.

  How to display a thumbnail view of pictures?  When I open the folder what I see is a generic panoramic picture rather than individual images.  My vista does not list the thumbnails in the dropdown display menu.  Before updating the Windows I used to be able to see thumbnails of my photos views when I opened the files with images inside.

  Here's a possibility... go to... Start ORB / Control Panel.
  Folder options / tab / files and folders / uncheck
  "Always show icons, never thumbnails" / apply / OK.