Vista icons with the new little blue box

Similar Questions

• Cannot move icons with the new ios 10.01 update

  I just updated my iphone 6 Plus and cannot move my icons of the screen in the screen or a screen.  WITHOUT jiggle with my finger on the icon.  Any suggestions?  Thank you

  Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.

• The famous little blue box

  Please do not roll your eyes < G > I tried to fix this on my own, for what seems a very long time. I Googled it and found a few old forums closed on the subject. I have trash the 'com.macromedia.Dreamweaver.plist' of my Library/Preferences folder several times with no results. I opened the browser prefs, and checked/unchecked boxes appropriate. I tried to download a file test.html from at least 4 different Dreamweaver sites, all with the same results in 3 different browsers. The html file and its jpg image file appears in the local site, and not in the remote site... after the download just the test html file is listed in the remote site of DW. For this reason that I think, is a problem of Dreamweaver. Please be kind and patient with this old lady who knows she lives on the cutting edge of technology, but didn't have enough years to consider all the in... just need enough savvy to get and to continue to build Web sites according to the needs of the most simple and effective way.

  iMac OS X version 10.4.11

  2 GHz Power PC G5

  2 GB MEM

  Dreamweaver MX

  Fireworks MX

  Safari 4.1.1

  Firefox 3.6.8

  Opera 10.61

  These are the web pages, that I used for testing:

  < http://carmie44.tripod.com/trees.html >

  < http://Ravencroft.hi.tripod.com/treestest.html >

  < http://yarnexpressonline.com/treesTEST2.html >

  DRM for all help and suggestions, you can give me.

  Thus, the step from the edge and make sure that you have properly set your site. This means that all your local site files exist in one site (or root) folder. If your picture is on the computer, but not on this issue, take it by its small handles and drop it in the folder of your site. You can use the file system of the computer to do this. In fact, I don't know how to function the "sites" or "files" Panel MX offers.

  The usual reason for it is an image that fails to, you guessed it (and have been), that the image was not downloaded.

  Make sure that the link to the CBC in your page file points again to the image, after the removal of the image in the folder of the site. Once you have the image in the folder of your site, try to put himself up to the server. If the page has been changed, which once again, also download.

  According to a definition of the 'old lady' is concerned, a friend of mine (95 at the time) said that 'old' is always defined as halfway between your age and 100.

  So we would never become old self, but all these other people out there.

  Please receive my good mood in the way it is intended... to be useful. If I have an overload of things that are already obvious to you, remember that we just met and I didn't ask you all these questions yet!

  Best

  Beth

• I don't like VISTA. I want to go back to my old XP program. I can't afford to buy them again. This program Vista comes with the new computer I bought

  The store where I gought this computer had these on special purchases and told me that I couldn't keep XP.  I think that VISTA will not many of my programs like print shop ect. It does not open some of my XP disks did.  Always open XP address book usung UM printing shop. Vista doesn't recognize UM.  Sometimes the Explorer and/or the internet will just fade and stop working for me

  Really, I want XP back, is it possible that you can do this?  As I can't afford to go buy an XP program.

  If you want xp you must buy it, if you can find it. And then only if your new PC has Windows XP drivers available from this manufacturer of PC

• How can I get rid of the little blue box on file Vista icons?

  How can I get rid of the little blue box on file icons? Like the shortcut symbol, it is in the lower left corner. It's a solid blue rectangle with 2 white "" superior to "sign, as to point to the right." He appeared on the recently created new files, MS Word and jpg photos. I find a nuisance when you try to view photo icons because it hides part of the image.

  -What is it?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/Vista-icons-with-new-small-blue-box/8a8887a7-7527-4E59-b61e-745091af8cda

• After reloading of FireFox, I lost the little blue box that opens a preview window.

  After reloading of Firefox, I lost the little blue box that opens a preview window.

  When has these previews been published? Was - that when hovered you over a link? If it was you the CoolPreviews add-on?

• the desktop application icons are highlighted in a blue box

  Original title: Desktop

  The desktop application icons are highlighted in a blue box, how do I get rid of the box?

  Hello

  · Will there be any changes made on the computer before the show?

  Try the steps suggested by MVP TaurArian from the link below: http://answers.microsoft.com/en-us/windows/forum/windows_xp-desktop/remove-the-shaded-blue-icon-from-desktop/ff9b7396-35c1-4209-be6b-1da103758e39

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• When Firefox, click on the desktop icon to a new window, all existing windows update first with the new FF window on top; How to keep the other minimized windows?

  Older FF Windows are covered with newer FF with the new FF window on top.
  It wastes time & space monitor.
  It is likely that a simple adjustment somewhere...

  This has happened

  Each time Firefox opened

  Is with version 3.6.6.

  This can be caused by a problem with an extension (Tools > Modules > Extensions)

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• BSOD when trying to install Win7 64 bit with the new motherboard

  Hi all

  I have the following BSOD problem:
  I installed a new motherboard in my system (a MSI P43 C51). Before that, I got a Gigabyte G41MT-S2P. The rest of the configuration is: Q9650, Thermaltake truespirit 90 cooler, 2 x 4 GB DDR3 1333, GTX 470, 750W PSU, case name, SATA HDD 500 GB, Windows 7 64 bit.

  Well, the problem started when I tried to boot into windows with the new motherboard: I got BSOD 1 second after windows starts loading. I thought... new motherboard, install new windows, so I tried to install windows 7 64 bit DVD and USB stick, I get the STOP: 0x0000000A error during installation. I changed the HARD drive, thinking that it could be a bad sector problem, but no, the other hard drive behaved exactly the same thing. I got BSOD at 40% extraction, extraction of 90% and for the moment "Complete the installation..." ». I also tried to install with the stick of memory only one, spent between ports, everything. The material I have works, as I played on my PC every day in the last month and received no. BSOD, also had a small overclock the CPU and the GPU (100 MHz on the processor, that the old motherboard supported more than 343 fsb and about 100 MHz on the GPU). It was stable, no errors, no nothing.

  My thoughts are only, after asking some knowledge that work in computer support, it could be a problem of version of the BIOS (BIOS is 2005..) and the fact that my Win 7 installation kit is without Service Pack 1 (a colleague told me that he had this problem for the PC more than once and after trying to install SP1 It went smoothly and without errors)

  I just got a new "blank" DVD of Win 7 64 bit with SP1. What I'll try today is to Flash the bios with the latest version and install the OS on a HARD drive new, sealed. He could not be my system components, because they are compatible and they worked 1 day before with no problems! I have literally NO IDEA what could be the problem. Today, I'll try the installation of the new DVD and with the new version of the BIOS. If this does not work, I have no idea what I can do... It is a sucky situation.

  If you have any suggestions, please, don't keep it to yourself :-D

  Thank you!
  Alex

  Hello

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ==============================================

  References to Vista also apply to Windows 7.

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  At the end of this message, I'll post a bluescreen generic and in the next convenience store
  How do to update the drivers and BIOS but also to check memory message.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ==================================================================

  General troubleshooting BlueScreen to use with the methods above.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• Cannot control portable iTunes with the new remote application

  Hi all

  Hey I just got the new remote application and it seems to have the ability to control your applets. The former used for you to control iTunes on your laptop remotely.  Is it possible to do this with the new application?

  Thank you

  Pete

  I have three Remote apps made by Apple on my iPhone, to control iTunes has a blue icon on a white background with a white play button. Keynote remote has a picture of a desk, and the Apple TV remote is grey and black with the logo of Apple TV. You want the first.

  TT2

• Libretto U100 - Bluetooth to connect with the new Samsung mobile

  Just bought 2 new machines: GSM Libretto U100, Samsung E720 Bluetooth equipped both. Uploaded everything first the last battery BT (3.2) using the wizard, my phone has been detected correctly and the first time that he asked a key access code, which i left blank. The second time I tried to connect, he asked no more code. The following screens will appear:
  1. the search for BT - Samsung E720 device detected!
  2. now connect to your BT device
  3. the local device connects to the remote service, please wait...
  And now, you can wait for hours because the program has stopped responding.
  My mobile has been configured for detectable and BT has been activated.
  I read the manual of the phone, but these are the only parameters of BT. The other way around, when I leave my phone to a BT device research, he found nothing.

  Thank you very much for making my two toys to talk to eachother!
  Ben.

  Hi Ben

  It's not easy to tell what the problem is but as far as I know, you must set the password for pairing.
  I recommend you to remove the mobile phone the Bluetooth Manager and re - install the mobile phone settings.
  Try to set the password for pairing. In addition, see the following steps:

  1. check if the laptop antenna switch is on.
  2. press the + - key combination to activate the Bluetooth antenna.
  If your laptop is integrated WLAN and Bluetooth.
  3 start the Bluetooth of the TOSHIBA-> folder settings program Bluetooth to turn on the Bluetooth module. Bluetooth works if you see a blue antenna with a bright blue border of the bar on your screen. Also a blue antenna icon with the name Bluetooth information interchange will appear on the desktop.
  4. check that your Bluetooth hardware is properly installed.

  Good bye

• How to change the SSID name of the computer to be Compatible with the new name SSID router

  Need to change the default name of the SSID router and then reconfigure adapters wireless in each PC to be compatible with the new router SSID.  A PC has Windows XP Home Edition Version 2002 Service Pack 3 and the other Vista Home Premium.  What are the steps to change the SSID on each PC?  Your response will help complete a home network wireless system.  Thanks in advance.

  Hello

  Your computers use the SSID of your router - sound essentially its name.

  Check this box:
   
  Setting up a wireless router with Vista
  http://www.ehow.com/how-does_4899098_setting-up-wireless-router-Vista.html

  If necessary:

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  Setting up a wireless router with Vista
  http://www.ehow.com/how-does_4899098_setting-up-wireless-router-Vista.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• printer scan works only with the new windows 7

  upgrade windows xp to windows 7 with the new HP Omni 220PC. Have a printer HP C309g-m. To scan from the printer to the computer xp, I had to use the HP Solution Center. The printer works very well with the new windows 7 program and new computer. I install wireless. No problems with it. Today when I went to scan a document with the HP Solution Center (I thought I had to use as before), this message came.

  "HP Solution Center cannot work because your device installation is not complete. Please connect the usb cable, or rerun the installation for a network installation cd. If it does not complete the installation, or you do not have the cd, access the HP help files by clicking on the start menu. "Everything I did. My installation CD said I had a version of the latest update on the installation CD, it was of no use. I went to the HP site and find a download for the drivers updated etc. I downloaded and installed. (although I don't know whether or not it was a duplicate of the drivers of devices on windows 7 for this.) I checked Add/Remove programs to make sure that the printer and the hp solultion Center have been added to the programs. they are listed. I can always scan with

  the hp Solution Center. Should I not this program to scan with this new pc? How can I scan from my printer now? I even tried to click scan on the printer, then scan to computer. the message I got was 'Try from scan of compurer. Refer to the documentation for more details ".  To be sure, I'm all mixed up now. All I want is for my scan printer to work with my new pc.  Everything works well except that scan thing, may help me understand what to do?:  Thank you

  all fixed. has crossed my computer to start then click HP click HP and open list. Went to my printer-clicked on my printer and clicked on the icon list to see if it worked correctly. This is a problem with the drivers and a box popped up with directions on where and how to download and install the devices for windows 7.
  Done this and tested it and everything works fine now. (Ihad already tried the HP site for support and downloaded and installed the fix suggested for the problem, but it did not work). in any case, its fixed and I hope that if someone has a problem, this information will help you.

• Install old HDD to the pc with the new HARD drive and operating system different?

  Hi, I recently ripped my old laptop that no longer works, after buying a newer laptop 4 years ago. The new laptop has Windows 7 Ultimate 64 bit installed while the old machine had Windows Vista installed. I want to put the old HDD in my new machine to extract some files that I want to keep and possibly use this particular drive as a disc of extra storage without having to turn it into a portable device. Would that work or would I meet problems with him? It would be just a plug & play this sort of thing (as the old HDD already has an operating system installed) or the old drive (vista) would cause the new drive (win7) fails at startup?

  And sorry if this has already been covered. I searched through the questions asked previously and has not really found a similar job.

  You can use your old drive, but you should check that the "Boot order" is the most recent Player listed before the old drive. If need be exit and save your BIOS boot becomes.

  Next

  After you have started since the new drive, you may need to take ownership of the files you need to copy.

  To take ownership of a file or folder

  1. open Windows Explorer and locate the file or folder you want to take charge.
  2. right click on the file or folder, click Properties, and then click the Security tab.
  3. click on advanced and then click the owner tab.
  4. click on edit and then do one of the following:
  To change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.

  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  5. (optional) to change the owner of all subcontainers / folders and objects in the tree view, select the Replace owner of subcontainers and objects check box.

  Then use 'Disk management' to delete all existing partitions and reformat the old drive.

  J W Stuart: http://www.pagestart.com