Vista taking do not password; How I get to window password?
I entered my password and the computer says 'Welcome' slider spin-30 seconds and then he struck me out and asked a different password.
How can I reset my password? I don't have the disk. I'd rather not spend $34.99 with software.
My recovery disk will have this reset password on this subject information?
Thank you
Mike
Hello
The recovery disk normally reinstalls the operating system configuration, as new, the way it was when you bought it.
There is no way to reset password to keep your current installation will using this method.
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
And this is the Information from Microsoft on the problems of passwords;
You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.
If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.
- Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
- Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
- Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
- Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.
Malware can also cause problems with passwords:
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
See you soon.
Tags: Windows
Similar Questions
-
It took me almost an hour to get to this point. I am technologically challenged. I have an old version of Firefox. The instructions immediately embark on the 'Firefox window' but says nothing about how to access this window. Where this window? Maybe I should just download Opera?
"Firefox" means Firefox, this is the window that appears when Firefox is opened.
You must follow the directions to update to the latest version Firefox update to Firefox 33.0.2 (read to the bottom of the page to see the screenshots). This will take you to the most recent version of Firefox, and then we can help you with other problems you're having with Firefox.
If you are a beginner in Firefox, try to start with Firefox – an overview of the main features of the reading
-
I went to view/toolbars and disabled my toolbars. Now I can not understand how to get back them. Have no 'view' to click on.
In Firefox 3.6 and later Windows, you can hide the menu bar on "view > toolbars" or via the contextual right click menu on a toolbar.
Press F10 or press and hold the Alt key to bring up the menu bar temporarily.
Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select to show or hide toolbars (click on an entry to switch from the State).See also what happened to the file, edit and view menus? and http://kb.mozillazine.org/Toolbar_customization
-
I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? What this mean and how can I solve this problem? I have also a certificate has expired and do NOT know how to get a certificate of update. ? Please Help, I have NOT been able to get help from any of these Issuea. Very frustrated. Please contact me by txt on my iPhone 352-257-9403 if possible. Thank you for your support
iOS 9.2.1
certificate is daily horoscope
wwhat the devil is and why it has expired?
-
AC charger does not. How to get a replacement?
I unplugged my charger yesterday, and since then, even after plugging in the charger, my laptop still works on battery backup.
I tried to change the power point too, but did not work. Now the problem is that I can't send my HP Centre machine, given that I don't have enough battery power remains to make a backup.
I just need a new charger for my laptop, but do not know how to get the spare parts of HP.
Can I get the new charger replacement if I take the laptop and the charger to the service center and have checked at this time, rather than return the laptop for repair? In addition, then I did the weekend, cuz going to the service center in week is not possible for me?
Oh one last question. How long does take to get an accessory replaced from HP service center?
Hello
Simply call the support technique hp on 1800-474-6836 and if you laptop is under warranty then the AC adapter can be delivered only if there is no led lit on the port of the adapter on the laptop ac...
BRAVO HIT IF IT WORKS... !!!
-
There is a reduced price for Windows 7 if I recently bought a computer with Windows Vista? If there is how I get it?
You are in the Windows Update Forum.
How does the Windows 7 upgrade Option?
The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010. Manufacturers can choose to offer the option for a shorter period on their PC.
http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx
Above Microsoft link has info for the Options to upgrade Windows 7 from participating computer manufacturers.
Read the info here to see if you qualify.
http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx
FAQ about the upgrade is at the link above.
http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx
Windows 7 Upgrade Advisor.
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
Railways upgrade to Windows 7 at the link above.
For any other question of Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 forum for questions on windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.
I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.
===============================================
You can resize a picture in WLPG but if you want to change the .dpi you
need a different application.Information about resizing...
Right-click on one or more selected inches... Choose... "Resize" in the menu.
Choose a format, access a folder to save in the left click the ' resize and
Save "button. (I suggest that you save the photos resized in a new folder
to prevent the replacement (replacement) the originals)Take a look at the following link:
Resizing Photos in Windows Live Photo Gallery
http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspxIn addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
and go... Image / information. Enter the resolution you want in the resolution
fields and on the left, click change. Then go to... File / save as... and save
your photo altered with a new name.IrfanView
http://www.software.com/IrfanView
(Download plugins too)
http://www.software.com/IrfanView-pluginJohn Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
I am runing vista and do not know how to use the fax machine
I am runing vista and do not know how to use the fax machine
Here's how to set up Windows Fax and Scan: http://windows.microsoft.com/en-us/windows-vista/Set-up-your-computer-to-send-and-receive-faxes. Navigate the reference links on the right for more information on how to send faxes and other information. If you do this on every page you just, you can see all the articles on how to fax and scan and configure the system and solve problems, and many other subjects that may be necessary, useful or informative. After that, you must be an expert on this subject.
Here is a quick and easy way to send a fax in Vista: http://www.ehow.com/how_2029566_send-fax-vista.html.
Unfortunately, the foregoing is available in Business, Enterprise, and Ultimate - not Basic or Home Premium. In the latter, you need a 3rd party program. If this is the case, here are some options:
With the compliments of Bob F. http://www.vistax64.com/vista-print-fax-scan/127986-how-do-i-download-windows-fax-scan.html:
Not available in Vista Home Premium Basic FAX. It is available in complete edition,
Extreme and business.You might want to consider Snappy Fax at a low cost:
http://www.snappysoftware.com/or the free version of BVRP:
http://www.usr.com/BVRP/bvrp.aspor a full BVRP Classic Phone Tools 9: $29.90
http://www.shop.Avanquest.com/USA/PR...S_CPT_homepageLook screen kinda gross but the product Snappy fax
actually, is quite rich in features and works very well. BVRP also works very well,
screen looks a bit better. Other that that, there are minor differences
performance between the two.I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How to get the window slider in javafx
How to get the window Slider in javafx when the button is clicked window slider should open with sliding effect and when we clock the button close the cursor window it should be close with effect sliding... plss send the link in this regard or if possible then plss send code. Thank you inadvance
Look at the examples following, and if they aren't what you are looking for, please post back with a more elaborate description of your problems and a NBS of what you have tried so far (even if this does not work as you wish).
Experiences with Java: sliding in JavaFX (It & #8217; s all about cutting)
Example of a JavaFX component that slides in and out on command.
-
How to get the windows username in jsx
Hello
I have a script JSX in "My Documents\Adobe Scripts" do script computer confidence. I have another text file, I need to read of JSX. Since the location depends on the user, I need to find the windows user name. If anyone knows how to get the windows of jsx username please answer.
Thank you very much.
Concerning
NIMA.
Hey,.
You can get the username like this:
var myUsername = $.getenv('username');
You can also get the My Documents folder like this:
var myDocFolder = Folder.myDocuments;
Hope that helps.
--
Marijan (tomaxxi)
-
How to get the source to windows vista Home premium recovery is not from the recovery partition and gives me an error message
Hello
Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Less error have a playstation 3 and windows vista. I have a combination of problems aggravated by not being not very Internet / computer savvy. The issue is around file sharing and lower my firewall. I don't know how to get my playstation 3 appears on my network and I don't know how to enable file sharing. at one point, the RAD icon appeared and without changing anything, he disappeared. I can follow the simple instructions but my absence I have a playstation 3 and windows vista. I have a combination of problems aggravated by not being not very Internet / computer savvy. The issue is around file sharing and lower my firewall. I don't know how to get my playstation 3 appears on my network and I don't know how to enable file sharing. at one point, the RAD icon appeared and without changing anything, he disappeared. I can follow simple instructions, but my lack of expertise is really crippling my ability to do for himself. I tried to lower my firewall (not sure if I did) but I need to be walked up to the baby step by baby stepof expertise is really crippling my ability to do for himself. I tried to lower my firewall (not sure if I did) but I need to be crossed self-study baby baby
- Recent changes to your computer
- What you have already tried to solve the problem
Google comes up with these:
http://www.ehow.com/how_5074747_network-PlayStation-computer.html
http://www.ehow.com/how_2216306_add-PlayStation-3-LAN.html
http://www.Google.com/search?q=network+a+PlayStation+and+a+home+computer&start=10&hl=en&SA=N&RLS=com.Microsoft: en - us & prmd = ivns & to source = univ & to TBS = vid:1 & to tbo = u & ei = PrtKTanFLMmCgAfjscnVDw & to oi = video_result_group & to ct = title & to resnum = 10 & ved = 0CGoQqwQwCTgK
http://www.absolute-PlayStation.com/PlayStation-Network/expert-PlayStation-3-hardware-accessory-help-PlayStation3-PS3-console/10631-PlayStation-3-wireless-connection-setup.html Brian Tillman [MVP-Outlook]
--------------------------------
https://MVP.support.Microsoft.com/profile/Brian.Tillman
If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer. -
How to get a windows Vista Home Premium 32-bit installation disc?
My computer is an emachine T5086. It has Windows Vista Home Premium and when loading drivers they stop loading at "windows32 drivers/crcdisk sys. I don't know what that means.
Then, the computer restarts and asks me to install my windows installation disc for repairs. F8 on reboot is not available as an option. I don't have a repair option I turn on the computer and hold down the F8 key manually. I don't have a windows disk or recovery disk and I can't to where I can find a restore either point.
How to make a windows Vista Home Premium 32-bit installation disk? I have my product key. Or where can I get one?
Hello
There are different methods to reinstall Vista.
There is no Windows Vista downloads available from Microsoft.
You can contact the manufacturer of your computer, eMachines and ask them to send you a set of recovery disks.
They should do this for a small fee.
http://www.eMachines.com/EC/en/us/content/home
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Vista Internet Security 2012 Trojan-how to get rid of him.
Someone at - he had this stupid thing? How to get rid of him. Ive tried system files, but it has already damaged a file. I tried Windows defender, he got something on my side admin, but could not see it on my user.
It seems that MS would get after the bastards who do these things.
Hello
read below for information on what it is and how to remove it
It changes its name, but it's the same Malware program
Win 7 Antispyware 2012, 2012 Antivirus Vistaand XP Security 2012 are all names for the same fake anti-spyware. This family of thieves is promoted in two ways. The first is to use antivirus scanners online fake state that your computer is infected and then prompt you to download a file that will install the infection. The other method are pirated web sites that attempt to exploit vulnerabilities in programs that you run on your computer to install the infection without your knowledge or permission. No matter how it is installed, as soon as it runs on your computer it will install as a variety of names in different programs and graphical interfaces depending on the version of Windows that is running. Whatever the name, however, they all end the same program with just a different skin to this topic. This rogue is going to program different names, one of which I have listed below based on the version of Windows that is installed on:
Windows XP rogue nameName of Rogue Windows VistaWindows 7 Rogue nameXP Antispyware 2012 Vista Antispyware 2012 Win 7 Antispyware 2012 XP Antivirus 2012 Vista Antivirus 2012 Win 7 Antivirus 2012 XP Security 2012 Vista Security 2012 Win 7 Security 2012 XP Home Security 2012 Vista Home Security 2012 Win 7 Home Security 2012 XP Internet Security 2012 Vista Internet Security 2012 Win 7 Internet Security 2012 Follow the EXACT below removal instructions
http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2012
-
(In the AutoPlay dialog box that appears when you turn on the DV camera, click importing video.)
It's # 2 on how to import the video but when I pluged my camcorder (Sony trv608) in my emachine (I have windows Vista Home Basic), nothing is happening... How to get my video on my computer and my video cam?... I also got told by sony I needed to cap analog, so I have I need to download something on internet even thought I have Director on my windows? IM so confused?Hi harleykristi,
Welcome to the Microsoft answers site!
Looks like the video camera (Sony trv608) is not compatible with windows vista, see the Sony link below:
http://eSupport.Sony.com/us/Perl/SWU-download.pl?upd_id=1452&MDL=CCDTRV608
() Vista drivers are not available)
You try to install the software that came with the device in windows XP service pack 2 compatibility mode. See the link below:
Run the program compatibility Wizard
1. open the program compatibility Wizard the by clicking the Start button, clicking Control Panel, click programs, and then clicking on use an older program with this version of Windows.
2. follow the directions in the wizard.
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
For more information, see the link below:
http://eSupport.Sony.com/us/Perl/model-home.pl?MDL=CCDTRV608&loc=3
You the best solution would be to check with Sony to learn more.
http://eSupport.Sony.com/us/Perl/contact-land.pl?MDL=CCDTRV608
Hope this information is helpful
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I installed freeware who hijacked my search. He removed all the default search engines and left only bing which was then my default. I managed to get off the list of bing and google added so I can search. It is not my preferred search tool. I can't f
-
Satellite A200 freezes / restarts randomly on startup
Hello I have Toshiba Satellite A200, Windows Vista Home Premium SP2 6.0.6002.Intel (r) Core (TM) 2 Duo CPU T5450 at 1.66 GHzVideo ATI Mobility Radeon HD 2400 version = 8.380.0.0Audio version of Realtek High Definition Audio = 6.0.1.5406Network Marvel
-
Qosmio F20-149: how to start the eSATA disk OS?
How can I boot my OS from an eSATA drive connected via a PCMCIA-SATA Adapter? Post edited by: MrG
-
Some updates do not install it.
Do not install it: Update for Internet Explorer 8 Compatibility View List for Windows XP (KB2362765)Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2416472)Se
-
Valid product key entry on says no sticker
Product key I've entered my product key I found under my laptop, but when I entered the product key to Dungeon, saying that the key is invalid can someone advise me on how get the entered product key so I can start using microsoft