Visual Basic 6 IDE - Windows Common Controls 6.0 does not work after March 31, 2013
I apologize if this isn't the appropriate section of this post, but I couldn't find a better.
I'm under Visual Basic 6.0 sp6 IDE on both 64-bit Windows 7 systems. They worked wonderfully until last Monday.
Now, I have a problem only on ONE of them: I can't use the Windows Common Controls 6.0 in VB6 IDE.
Existing projects are unable to load all references and new projects allow me to add common controls in the components.
This occurs only in the VB6 IDE, executables compiled work very well.
The error I get when I try to add common controls in the IDE is a generic "file not found".
If I run the IDE with Windows XP compatibility mod or administrator privileges, the error becomes 'unregistered object library'
The weird part is that:
(1) a computer has been used Sunday 31 is now unable to use the VB6 IDE Windows common controls.
(2) another computer was off from Friday 29 to 2nd Monday is not at all account of any problem.
It seems related to the MSCOMCTL. OCX or of its dependencies. I tried a few combinations of these steps:
-Reinstall the IDE
-Deregister and reregister the OCX
-With the help of new files from the system of work
-Manually remove all the entries in HKEY_CLASSES_ROOT\TypeLib\ {831FDD16-0C5C-11D2-A9FC-0000F8754DA1}
-Perform a reboot between each steps
None of the above has worked, in any combination.
Now the part "stranger":
If I change the date to March 30, VB6 IDE system once again the common controls. Switching back to today's date, brings back the problem.
During the night between 30 and 31, time spent, my it guessing this and the fact that the computer has been used Sunday 31, is somehow related to the problem.
I was advised in another thread (where a user knows my situation, with 4 systems on 10, with the same symptoms), I ask if this problem could be transmitted to Microsoft, if possible.
Thank you in advance.
Hello
The issue is limited to Visual Basic 6, it would be better suited for the IT audience Pro on MSDN. Please ask your question in the MSDN Support Forum. You can follow the link to your question:
http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads
I hope this helps.
Tags: Windows
Similar Questions
-
Windows Update and System Restore does not work after that the virus
I recently had a virus on my computer, when I finally had removed my windows update does not work, my system restore will restore to any previous point and my computer seems to generally work more slowly. Also groovemonitor seems still exists but is not really available to use, it runs in the process but is not available anywhere else. Any suggestions?
Hi TedDanson,
1. do you get an error message when you try to run the restore system or Windows updates?
I suggest you run a complete antivirus scan using Microsoft Safety Scanner to make sure that there is no virus infection:
I hope this helps.
-
Venue 11 7140 pro micro HDMI does not work after upgrade windows 10
Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.
I have thus display driver problems on 10 to win.
For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.
The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.
I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.
It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.
-
my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?
I downloaded the former driver of windows 7 touchscreen and it worked
-
Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India
My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?
Hello
Method 1.
Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detailI suggest updating all your drivers from the link above and drivers Realtek especially.
Method 2. Set the default Microphone.
Once the drivers installed to check if the microphone is the default value, here's how:
Exercise the functions mentioned below to adjust the Microphone as default:
1. Click Start and click on Control Panel.
2. click on sound, then a new window will open.
3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
4. now check if the Microphone is listed there and right-click on it and choose activate.
5. turn highlighted that Microphone and click "set as default".
For more information see the articles below:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questionsI hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate
My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.
Help please
Hi asalamk,
The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools
You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.
-
HP deskjet 3510 does not work after windows 8.1
My printer HP Deskjet 3510 cannot be detected after windows 8.1. My computer is a HP Pavilion g6. Now, I would never, I clicked to install, I wish they would send me just windows 7. Laughing out loud
@klb75,.
Thanks for posting.
The cardinal rule of when something does not work after update to 8.1 is put it back in place. This applies to the printing software and all other software. Uninstall from the control panel configuration, programs and features. Then, restart the computer.
After that, download and install this software: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-108718-3&cc=ca&dlc=en&lc=en&os=4158&product=5157483&sw_lang=
* Thus, before installing the software, disable all Firewall/antivirus software. This software can create conflicts with the printer software.
If reinstalling it does not help, run print and scan doctor. He could fix it... http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=CA&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/printer_diag/&softwareitem=MP-135113-1
-
My antivirus does not work after uninstalling windows 10 and return to windows 7
I have upgraded to windows 10, but has had a few problems in general, especially with my keyboard, the printer, chromium and the office so I decided to go back to windows 7, but since kapersky does not work on my computer. I have full protection, but it will not work. I tried to restore my computer, but there is nothing before the upgrade to windows 10. I tried to restore to a previous version kapersky, but there aren't any. I can't uninstall it because it says it has been removed, even if it is still in the same place, I can't go back because he said that I have already. I tried running as administrator and in compatibility mode, but still does not work. When I try to run as administrator it says I don't have permission to access the item, but he isn't blocked or something. I don't know what else to do. Any ideas?
You will probably never get Windows 7 running again, until you perform a new installation of Windows 7.
I recommend a factory restore. There is a hidden on your hard drive partition (assuming you have the original OEM hard drive) that has a copy exactly what was on your computer when you first started it.
Tell us the brand and model and we will send you instructions on how to perform this.
First of ALL, download your saved data. Factory restore erases everything.
-
ASUS laptop computer: touch screen does not work after update of windows 10
My touch screen does not work after update of windows 10 in Chrome. How can I fix it?
Hello
Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.
Kind regards.
-
Satellite A300D-15B - Webcam does not work after upgrade to Windows 7
My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck
Hey Buddy,
What does it mean exactly when you say he won t work?
You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.
-
Satellite C50D-A-12 x - touchpad does not work after Windows Update
the touchpad does not work after the windows updare
I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
https://Forum.Toshiba.EU/showthread.php?82878 -
Pavilion dv6 sd card reader does not work after upgrade to windows 8
Hello
My card reader SD HP Pavilion dv6 does not work after windows 8 upgrade (6 months ago). Previously, it was working fine when I was with Win 7 (which is the default OS with this laptop). I don't find the device in Device Manager (under the peripheral system or hard drives). Read the similar section in the HP forum, but it did not help as much as the device is missing in this case. Can anyone help?
Hi SanSam.
Thank you.
Install the driver from Realtek for Windows 8 card reader.
Please post your results.
Best regards
ERICO -
My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
Although of course, the CD-ROM drive worked during the upgrade.
I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
PXE - E6i:Media Test Failure, Check Cable
PXE - MOF: Exit PXE Rom
During the audit of each Properties in Device Manager devices", I learned that they both work correctly. In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
Can someone help me please?
Best regards
JohnBesides what abdelhak says:
The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.
Hope this helps,
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
HP Laserjet 2100 does not work after upgrade Windows 10
HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...
Thank you!
If the printer is connected using a parallel printer cable, please see the link below for the solution.
-
My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10. Is there a fix for this yet?
I thought about it. The upgrade to Windows apparently damaged 10 HP SimplePass software. Once I uninstalled and reloaded the program, everything started working.
Maybe you are looking for
-
Satellite R20: Difference between PSR20E-01Q00NPL & PSR20E-01Q00RAR
Hello, what is the difference between Satellite-R20 model "PSR20E-01Q00NPL" and model "PSR20E-01Q00RAR"? Post edited by: Wade
-
Windstream says interferes with ADSL modem router
I signed up with windstream DSL internet service yesterday. I have a netgear wnr1000 n150 router and a flow stream 4200 dsl modem. Everything was fine until an hour ago. Service was very slow. Then tried to get on Netflix on my tv and it does not loa
-
E440/E540 Fn and the key Ctrl Swap
Can the owners of any E440 and E540 if these laptops have the ability to remap the Fn and Ctrl keys? I understand a BIOS setting provides this function on the previous models of the E series, but did not find any specific information on newer models
-
Original title: Octashape streaming system Hello A dialog box appears on my screen:Octoshape streaming services: could not bind to the local host. Please check your firewall configuration What should I do? And if this does not work between the firewa
-
Vista - Error Code: 800F080D (could not install KB982666)
I have vista sp2 64-bit and when I try to install securityupdate KB982666 but get the errorcode 800F080D. How can I fix?