VLAN community private with several internal subnets.

Similar Questions

• ASA EzVPN with several remote subnets

  Hello world

  I'll have the challenge of EasyVPN installation based on ASA 5520, and ASA 5505 (with the ASA5505 as the vpnclient) with several networks behind the ASA 5505.

  Access by the network directly connected on the 5505 to the central site works very well.

  But the second network segment (which is behind a router on the directly connected network) cannot connect to the central site.

  I guess I need to specify that some sort of acl's to be able to do that.

  BTW we do not use tunneling split, because all traffic moves through the tunnel (no local internet access).

  The layout looks like this

  (--LAN--)-5520---5505-(--LAN1--)-ROUTER-(--LAN2--)-(WAN)-

  LAN1 and LAN connection works great through the EZVPN Tunnel.

  LAN2 connection to the LAN does not work through the Tunnel of EZVPN.

  Here is the configuration used so far (outside the normal SHEEP, groups of objects and stuff ISAKMP crypto):

  Client:

  vpnclient Server 10.x.x.x

  extension-mode network mode vpnclient

  EzVPN vpngroup vpnclient password *.

  vpnclient username user1 password *.

  vpnclient enable

  Crypto ipsec df - bit clear-df outdoors

  Server:

  internal EzVPN group strategy

  Group Policy attributes EzVPN

  allow to NEM

  allow password-storage

  tunnel-group EzVPN type ipsec-ra

  General characteristics of tunnel-group EzVPN

  Group Policy - by default-EzVPN

  IPSec-attributes tunnel-group EzVPN

  pre-shared key *.

  user user1 password *.

  I hope you can help

  Best regards

  Jarle

  Unfortunately, it is not supported on the platform of the SAA. With EasyVPN on the SAA, only the connected networks can be advertised. To accomplish what you want to do, you need to configure a static IPSec tunnel and announce local networks via ACL interesting traffic. You can also use an IOS device that does not have the capabilities of "multiple subnet" with EasyVPN.

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_easy_vpn_rem.html#wp1098057

• SA520W VPN from Site to Site with several VLANs

  Hello

  I have a customer here with several VLANS in their places who wants to set up a VPN from Site to site between 2 devices SA520W. Unfortunately I can not find a way to set it up. In the VPN policy, I can choose between everything (which is not what I want, I want only traffict between subnets the routed via VPN), IP address unique, a beach (in a subnet) and a subnet itself - but only one. I don't find a way to configure several subnets in the selection of local traffic and remotely. Adding another IKE policy between the 2 sites does not either (which is good normally).

  Any ideas? Anything I'm doing wrong?

  Thank you for your help.

  Best regards

  Thomas

  I know that if you have an ASA or a router, you can define as VLANS to pass through the tunnel.

  Do not have access to a SA520W to test...

  A recommendation might be to post the question on the SMB community where they answered questions related to this product, just to check what other people did.

  Federico.

• Several internal classes with an extended public class

  Hello

  
  

  I found a strange behavior, I wonder if someone can explain.

  
  

  If I have a class that extends another, for example,

  package {
       import flash.display.Sprite;
       public class MySprite extends Sprite{
            public function MySprite():void{}
       }
  }

  and extend this class, if several internal classes are defined:

  package {     
       public class MainClass extends MySprite {          
            public function MainClass():void{}          
       }
  }
  class HelperA{
       function HelperA():void{}
  }
  class HelperB{
       function HelperB():void{}
  }
  

  I get the following error:

  
  

  VerifyError: Error #1014: Class test.windows::MySprite could not be found.
  
  ReferenceError: Error #1065: Variable MainClass is not defined.

  Note that this happens only (AFAIK) when the package public class extends another class, and several internal classes are defined.
  Inner classes even need not to be instantiated or referenced to generate the error (the rudimentary code above will mistake).
  If only a single class domestic is defined, it works very well (no error).  Even if the class is instantiated.
  If someone could shed some light on this, I would be grateful it.

  You are right.

  I used cs3 and had no problems.  When I opened Untitled - 2.fla and tested in cs4, I received the same error messages like you.

  It is a bug in cs4.

• Problem with RV0042 - mask subnet/router/gateway?

  Hi guys.

  I have a DSL here in Holland. To use my RV042 VPN function, I need the router to get the IP of the DSL modem. No problem, I bought a modem that can define transparant and with dhcp-parody the modem Gets the public ip address (say 85.223.12.34).

  The thing is, I can't access the internet, or in fact any IP that isn't in the first segment of the external IP address. So I can reach 85.123.34.56, but not 86.123.34.56. So I plugged the modem to a computer, set the transparent modem and the computer got the public IP address. And you know, I have a perfect connection, and everything works. Looking at my ip information, download the provider 255.0.0.0 subnet. Im not a Networking Wizard, but it seems to me that the problem lies here. But why is my stand-alone pc able to connect quite normal, but when I connect my linksys RV042 and internal diagnostic test (ping) of the router or a computer behind the router, obtaining an ip address, I don't get anything.

  When I ping manually, I also get the message "network is not available. Ping to an IP on the same subnet (for example, 85.111.111.111) goes perfect.

  I'm obviously missing something here. My colleuge said it could be and router/gateway (currently bridge) or a NAT problem-associated device.

  Please point me in the right direction.

  Intellectual property of addidional information:

  External ip address: 85.223.12.34

  External subnet mask: 255.0.0.0

  External gateway: 217.149.196.82

  External DNS: 217.149.196.6

  Internal IP address: 172.16.0.254

  Internal subnet: 255.255.0.0

  New firmware etc.

  Thank you guys!

  What static routes you add exactly on your RV? It's funny, it works now.

  WIndows seems to accept a gateway address that is not on a connected interface.

  The first line is the rule of default gateway:
  0.0.0.0 0.0.0.0 217.149.196.82 85.223.66.38

  The second line just tells you that 85.0.0.0/255.0.0.0 is connected to the ethernet adapter that has the IP 85.223.66.38.
  85.0.0.0 255.0.0.0 85.223.66.38 85.223.66.38

  Technically, the first route should now work. There is still no route for 217.149.196.82 in the routing tables. The only route that matches the destination IP 217.149.196.82 is the first route.

  But I guess that, in your case, that default gateway with 217.149.196.82 is actually connected to the network on the side of the VP, i.e. your ISP WAN runs two IP subnets on the same network. Since this first route runs on Windows, I guess that WIndows simply tries to find the MAC address of the 217.149.196.82 on the WAN using ARP interface (i.e., it assumes that the device with 217.149.196.82 is directly connected to the WAN Ethernet) and if something is used as default gateway. Is not really consistent with the ideal IP routing, but still works...

• DMVPN (NAT?) solution with rais as subnets

  Hi all

  I have a large number of remote networks that are prevalent all over the world. Currently, they are all individual island with no connectivity to anywhere else.

  What I would do is connect all back to Headquarters on the internet so I can access it remotely. The internet service that I receive from all the sites will be different and unknown for example some directly on the internet, some behind NAT.

  So I think that the solution to this is DMVPN.

  But my problem is that all of the remote locations have the same internal subnet. So, how can I make sure that they are all connected and remote devices are all available at the same time?

  I wonder if I can configure NAT on the router may talk so that each device has a static nat with the Natted IP is unique. I labbed this place GNS3 and it seems to work. However the problem is that there are hundreds of devices on each site, which means a large number of NAT entries.

  I was wondering is it possible to make a fair full 1:1 Nat specifies a network to network. For example, something like 192.168.20.0/24 NAT to 10.0.1.0/24, so try to access the 192.168.20.5 in fact, it connects to 10.0.1.5

  Has anyone never has something like this work?

  Y at - it a good solution?

  Thank you, Simon

  It is possible, but (assuming they already use NAT for Internet access) you'll need to define things very carefully to avoid interference with what they have.

  Do a complete translation of subnet is easy and is a good word:

  IP nat inside source static 10.0.0.0 network 192.168.0.0/24

  The problem is that this will replace all existing for this subnet NAT, condition and the existing NAT configuration.

  Can you provide an example of how the current NAT is set up for one of these sites?

• Registration with several devices in hearing issue

  Hello-

  I'm working on Windows 10 on hearing, so I don't have the ability to record with several devices at the same time, given that I am limited to Windows provides the option of Ms. I know that I need to install a different driver while I have the ASIO option in the drop down hearing. What more reliable ASIO that I can install for free and do not give me a virus while I am able to record my external USB sometimes and the internal stereo mix of my computer?

  Thank you!
  

  The only way to achieve what you are asking is to find, download and install the free ASIO4All. http://www.asio4all.com

  However, if this will allow you to use the "internal stereo mix' of your computer I'm not sure.

• Book of 10 with several files frame crashing when I change the numbering at the level of the book.

  I built a picture book (image 10) with several files from a variety of books. The files have inlays of text and references to breast and between chapters. When I go to set the numbering at the level of the book - as soon as I click on the Numbering dialog box Set - Framework breaks down and I get an internal error 10024, 6382424, 6369627, 6383085. I have attached a screenshot.

  I take the files on the book and added back in. These files worked fine in the original books, that I copied them from. I can't get the book to number correctly. Help, please.

  Hi, Estelle,.

  Don't know if this is relevant to what you are feeling, but...

  I've encountered similar problems of numbering with several of my books.

  What fixed it finally for me, is that I discovered that some files were overrides of paragraph style (not necessarily related to positions or section heads.

  Once I removed all replacements of these files, numbering issues have been resolved.

  While I use the plugin Tools section , you can scan your files for the substitutions with built-in FM find/replace.

  Kind regards

  Amitai Sela

  Philips Healthcare

• Two guests with a different subnet on the same bridge vmnet0

  Hi all, I have a server in a data center.  The data center has awarded me two different

  Beaches of IP addresses with two separate subnets.  The first beach with the subnet to 255.255.255.248

  compatible with my 3 people systems hosts that use bridged networking on vmnet0.

  4th OS uses 255.255.255.0 and bridge over vmnet0, however

  I can not get on the net, can't even ping the gateway.

  Then the bridge vmnet0 manage two different subnets?

  Thank you

  Matt

  Yes, network bridge can have several subnets.  Bridged using, your virtual machine works like any other physical machine on the network.  So just as if two physical machines on the same physical LAN had different submet, they would not be able to communicate directly with each other, so also with your virtual machine having a different subnet.  With two subnets, you should probably two gateways.  If you cannot change the 4th VM subnet to match others, you would need a router between the two subnets.  (Again, same as if they were physical machines.)

• Shortcut for the new window with several tabs

  Is it possible to have a shortcut on the desktop to launch a new window with several tabs? For example - home page is set to "www.google.com", but the shortcut opens new window with tabs "www.cnn.com" and "www.youtube.com".

  Then far,.../firefox.exe-nouveau-fenetre followed by the two URL in quotes will open two new windows. Entry - new-window "www.cnn.com" - new-tab 'www.youtube.com' will open two new windows if no instance of firefox is open, but if another window is already open, youtube will add a tab to the already open window, rather than the new window with cnn.com

  In reply to myself... withdrawal-order new window (and-new-tab), now it works.

  Looks like I'm too complicated it.

  shortened final was "C:\Program Files (x 86) \Mozilla ' 'url1'"url2.

• M40X: using digital telephone line with modem internal

  the M40 X manual says use digital telephone line with the internal modem, in zimbabwe, all lines are digital until to now do for telephone line

  [Edited by: admin August 10 05 21:19]

  Hallo nasir

  You are right. Connect the modem to a digital telephone line. As far as I know, the tension is much higher by digital line and it can damage the equipment.

  In my opinion the best solution for you is an external digital modem.

  Good bye

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• Background with several pictures

  How can I create a wallpaper for my iPad, iPhone, MacBook Air with multiple photos?

  (El Capitan, iOS 9.2.1 Photos)

  To create a collage of photos, you can create a photo book project and select a template page with several photos. Fill it with photos of your choice and print the page in PDF format.

  The themes of the book are different according to the terms of the photos and the number of photos per page.

  It's the theme travel plans:

  

  If you have installed iWork apps try Keynote to create a slide with many photos, arranged freely.

• WiFi HP ENVY 4500 with several Access Points - same SSIS Configuration

  Hello

  We just got a HP ENVY 4500.  I have a main homenetwork with a wifi Modem/Router and an old router acting as an Access Point to the floor to extend coverage.

  Both have the same SSID and password and are set to different channels.

  My HP ENVY 4500 fails to connect when the Access Point is lit.

  It will connect with it.

  Once connected, I can turn on the PA and all is well.

  The two router an AP using WPA-PSK/WPA2-PSK encriptación

  The router (that it connects to) should have a better sgnal when both are on, so I do not understand why they need the AP to be turned off to connect.

  Any thoughts people?

  Eserim

  I think he has always had problems with several access points.  Try this, what ever AP is closest to the printer, set it to channel 1.  Then try channel 11.  Try now.

• Carpet * a DVD-Ram UJ - 841S comes with several error messages

  My laptop is relatively new, I've been burning some video files in DVD - RW and all of a sudden my DVD drive has stopped working. It came with several error messages format "failed due to damage media", "format failed due to general failure" and "the inserted disc is READ only".

  I also can't rip music discs.

  Can you see ODD listed in Device Manager, and if so what is the exact status it?

  Sorry, but we discus on ODD, but nobody knows what model of laptop you have and what is the history of this problem. Is replaced the drive? Why are you sure that you are using compatible with your laptop ODD.

  Please more information!