VMare 5.5

Similar Questions

• Can I use VMare Workstation 7 instead of Windows 8.1

  I am required to have Windows 8.1 Pro or enterprise on my laptop for a review that I prepare, and my laptop running Windows 7. I won't buy another laptop which runs on Windows Pro 8.1 soon. I am afraid problems related to starting secure if I bought the 8.1 Windows and installed on Windows 7. A friend told me to download the VMware Workstation instead of buy the Win 8.1. Will this work?

  Please, what can I do?

  Hello

  For the purposes of evaluation that you do not need to buy Windows or VMware Workstation, you can get the trial versions of the software instead, and in this particular case, yes you can do.

  Note, however, that the evaluation software is limited in time.

  Try Windows 8.1 company | TechNet Evaluation Center

  and

  Try VMware Workstation, run Linux and Windows in a Virtual Machine. United States

  If you want to continue using the software after the end of the evaluation period, you must purchase a license.

  Success with your review.

  --

  Wil

• How to program the report of health vmare cheques...

  Dear team,

  I just want to know how to automate 'health chck report.ps1 '. automate execution of the 'report.ps1 health check' and send email report.

  concerning

  Mr. VMware

  MrVmware9423 wrote:

  Once as I plan the same via a windows scheduled task then it will run the same on the scheduled time. is it rite?

  Yes you can set it up in scheduled windows tasks to execute all X days at X hours.

  CAI I have the same via vcenter server program then it will work?

  No, the vCenter Server has no option to run Powershell scripts in its scheduled tasks. If your vCenter runs on a windows server, you can of course configure the task in windows Task Scheduler.

  Concerning

• Cyber Patriots practice question!

  I joined this competition and it is to harden the computer and make sure that there is no way to be used by another host etc. And I'm running a dirty picture on a VMare and I have a problem with XP and I was wondering if I can get some tips on how to turn on the firewall directly (with full access) I can't start the service from the services section in administrative tools.

  Hello

  1. are you referring to Windows Firewall?

  2. do you get an error message? If Yes, what is the full and exact error message?

  If you are referring to Windows Firewall, I suggest you for the link and check if that helps:

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

  If the problem is not resolved, please respond with more details and we will be happy to help you.

  Thank you.

• Best practices of supervision between vFoglight BMC EWC versus VMware

  IF someone has a good practice of monitoring collection they use for their VMware environment? There are more than 50 rules to select using the cartridge or a VMARE agent.

  I was wondering if someone has combined with a tracking profile that does not have so many alerts, theybecome white noise. Them is a BMC here footprint and being invited to assess

  the ability for the BMC COFFEE optimization tool. It seems some metrics collection tools and also well track overlap. I was wondering if anyone has used this tool to be in conjunction with vfoglight, or by itself.

  The general way I tend to look at alerts is first turn.  Then turn on only the bits that make sense.  In general, I want to know about the problems of VM, CPU/memory/running out of disk space (like the growth rate compared to fixed thresholds); The ESX host fall / maintenance mode/dead, running out of space data warehouses; Clusters running space and that's it.  Ultimately, this is about ten rules.  Even in this case I'm going to tailer them slightly by the environment, but it is difficult to find a perfect mix that works OOTB for each.  Usually, I'll spend an hour or two to install and then twist after a month or two of tweaking their.

  At the end of the day, a lot of rules will not apply to everyone, but it is better do to turn vs you have to start from scratch IMO.

  Thomas

• Unable to connect to Debugger

  Hello

  the title is very clear I think... My Flashbuilder cannot successfully connect to the debugger. It's very strange because I've done everything in the office today... Here, everything works like a charm...

  Any ideas? Read a lot on google for this problem, but nothing seems to help. May not be a difficult thing?

  greetings.

  Hey,.

  the solution:

  Add vmware player (!) to the Windows Firewall... :-)

  VmAre (depending on the software) was still in the list, but the player was not... Boring, but maybe it will help someone else.

  Welcome.

• UCS General questions

  Hello

  I have a few questions about UCS. Do not hesitate to reply to all the of them, thank you!

  1. What are the main benefits of using FCoE vs FC to UCS?
  2. can someone point me to performance data of FCoE vs FC in the UCS?
  3. What is the difference between the fixed modules and expansion on made them other than being able to replace the plug-ins? A difference that I noticed is that when you select "Configure the Ports unified" on the FI, it says that all FI will have to reboot if you use fixed ports, but the port expansion module can restart independently. There are other differences between the fixed modules and expansion?
  4. What is the best practice for creating organizations? The limit is usually the data center? What are the benefits for the combination of several data centers (which could be in the same geographic area) into a single entity?
  5. most people configure UCS of 'root', or they always configuring everything in specific OUs they create?
  6. This setup of most of the organizations mentioned here video separates VSAN for each fabric (A & B)
  a. How are the fiber channel pass setup to accommodate the VSAN on made them?
  7. is there an advantage to having separate VSANS / VLAN ID between fabric A and B? A few examples I see use the same ID of the VSAN on both fabrics, while others are not
  8. in this diagram (link), there are 4 connections from the FIs to the San. Each FI is wired to each storage processor. In this configuration, how it the SAN be configured - ALUA?
  9 (for ESXi hosts) what are the advantages/disadvantages of creating a model vNIC for each tissue, compared to one model for each vmnic vNIC?
  10. under what circumstances should you not check "Activate the failover" for models vNIC for esxi hosts?

  11. What is the best practice for the connection of FEX-to - IOM to the title of the material > policies > policies > chassis/FEX discovered political? Many companies set it up as a Port channel or not?

  (1) complex is the best I can say.  For us, we decided to stay with native CF that we already have the buildout FCC native. Our network group is for us to move to FCoE (we use N5K for our data center fabric switches).  But for our SAN group, we all all comfortable with native CF right now and didn't want to convolute our UCS deployment at a crossing FCoE.

  2) UCS FCoE, comes from the back of the interconnection.  There is no difference in performance. Once FC lands to interconnection, interconnection opens the package and converts it to the headers of FCoE, laying on a VLAN you configure (must be a VLAN unique, it will leave you not overlap with production VLAN defined in UCS already) and sends it to the VIC. The VIC then opens the package FCoE and hands to the BONE as if it were native fiber channel.  The difference in performance between the two is negligible.

  (3) the fixed module is controlled a.  When you change the unified ports any interconnection charges.  When you load a plug-in only the plug-in restarts if you change its setting unified ports.  Another thing to note when buying a plug-in you get you license additional ports that can be used everywhere where (it doesn't have a plug-in port license).  Other than that, the performance and the functionality is the same as fixed.

  (4) create us organizations for each type of OS because different groups managing different OS'. For example, we have an org for VMare, one for Linux, for windows, and then a special one oracle for our DBAs. We then assign permissions via AD to local so the groups have access to their servers with a minimum of effort on our part.

  (5) while root except if necessary below (haven't run this yet)

  (6) as a "best practice", you should always have two separate fabrics. UCS must put the FCoE VLAN fabrics.  To avoid confusion, it is best to put each fabric in its own VSAN. For example, we run our SAN fabric production in VSAN around 10 and FCoE VLAN 3210.  SAN fabric B is to VSAN 11, FCoE VLAN 3211.
  (6A) the prospect of a MDS/Nexus that you put in place a "f-port trunk." Newspapers of the UCS in the fabric as a nport with NPIV (ucs connects and then tells the fiber switch "also, these additional WWPN are also on this port, I just connected to, send their data to me").  You put the f-port channel you create on the mds/nexus device in the VSAN you want (in my example, 10 for A VSAN and VSAN 11b). Also to note: you cross never interconnection fabrics up to your SAN infrastructure. InterConnect will have a port channel to A SAN fabric and
  Interconnect B to B SAN fabric.  Consider the interconnections as HBA on a normal server.  You do not mix the tissues A and B.  That's how you get redundancy SAN.

  (7) see above.  I strongly recommend that create you separate VSANS for each fabric.  This will ensure that nothing ever gets through.

  (8) If you connect directly FIs them processors SAN you must activate the switch for on the UCS fabric mode.  You won't be able to connect the UCS for all fiber switches once do you it, and all the zoning must be done in UCSM. It does not work (we do in our test environment), be aware that it fits well beyond an area.  You would provide the same as before your San.  Activate ALUA.  The first port on each SP would go to FI - A and the second port on each SP would go to the FI - B.  Then the appropriate area in UCSM.

  (9) our ESXi hosts get a minimum of six models of vNIC.  We create an A, B mgmt, A vmotion, vmotion mgmt B, features and data B.  As you can guess, pin us each model to a cloth and do not switch.  This gives us a ton of flexibility within ESXi.  Furthermore, I believe that it is the 'best practice' is not to use the failover fabric for VMware. (If you chose, you will get alarms in vmware indicating that there is no redundancy nic.  There is an advanced disable setting.  Do not have casual, you would need to google that.). I recommend you to make a template for each tissue and keeping them up-to-date as a pair.

  (10) I wouldn't use fabric failover for everything related to VMware, VMware does a great job of redundancy management.  Let it do its work.  We only use the fabric failover for windows and Linux host running the SCU.

  (11) Yes set up as a port channel.  Before you connect the chassis as you can not no interruption of service do this later.  When a frame is automatically recognized, port channels or groups of pine are configured behind the scenes.  You cannot change these directly. Therefore, if you switch to port channels later, the only way to 'rebuild' is to re - emphasize the chassis, which will be the frame and everything in it in offline mode.  Bad day.  If you do not port channels, use the vETH blade interfaces get pinned to an uplink (following the defined process of cisco, google for UCS once again pinning get more information).  The channels of port pine servers to the interface port-channel instead of the uplink interface which makes it much more stable and resistant to link failure.  Pinning, if memory is, if a link to a server is pinned breaks down, the interface of the server is down.  It is not "repin" the link.  Thus, for example, if you do not use channel ports and a server gets pinned to uplink 1/1, and it breaks down, the server will see this interface out of service.  With a port channel, as long as a link in the chain is in place, the server will be displayed.

  I hope this helps. I typed this from my ipad - do not hesitate to respond and I'll try to clarify.

• installation suite 11.1.2.4 EMP

  Hello

  Can you get it someone please let me know if the following is possible in vmare on windows 2012 r2?

  Server 1 - essbase (intense memory demand) (32 GB - 8cores - 1 gb)

  Server 2 - essbase (application of intense memory) (32 GB-8cores-1 gb)

  Server 3 - essbase/planning (32 GB-8cores-1 gb)

  Statement Server4 foundation/epma/financial (32 GB-8cores-1 gb)

  Server5-relationship database (sql server)

  I have to install different instances essbase server on each server I have essbase on?

  Thank you

  Probably you've already watched the install documents: Oracle Enterprise Performance Management System Documentation

  Standard deployment guide lists the Server configuration required, and according to the guidelines of the that you have proposed is undoubtedly '' possible. ''

  Whether optimal or appropriate for your applications / load is a little more complicated!  This is an area where I would recommend really get some time to consultation of a specialist of the infrastructure.  Without wanting to be rude, I would make these decisions based on the advice of people on the internet who do not know the details of your request.

  Yes, they would be installed in different instances Essbase.  Are you planning on the use of clusters, or completely independent bodies?  The options for clustering are described in Deployment Options Guide.

  I know several environments where Essbase in particular has more memory than 32 GB, but again, I know not your applications, concurrency etc.

• SNMP with IDRAC questions

  I have Vmare ESXI installed on my Dell server. I tried to installed the package VIb, who succeeded and the dell printer troubleshooting tool can check the SNMP through my Vmware management IP.

  However, I want to use the IDRAC and I set up the string of community using the IDRAC interface but dell troubleshooting tools, but I get the error message

  The SNMP read request failed for the Get community name - test.

  I will be happy if someone can help me on this.

  NB. I read on the forum that there are two options to configure SNMP to IDRAC. I can only find one. If someone can point me in the right direction, that will be great

  Hello

  Have you done the following on the console of the iDRAC to set the name of the community and enabled the SNMP Agent? (For the detailed procedure, see http://en.community.dell.com/techcenter/extras/m/white_papers/20281547.aspx )

  a. connect to the console integrated Dell Remote Access Controller 7.

  b. navigate to iDRAC settings > network > Services.

  c. go to the section of The SNMP Agent .

  d. Select the check box to enable the SNMP Agent.

  e. Enter the SNMP community name.

  f. scroll to the bottom of the page if necessary and click apply.

  Let us know if it helps.

  Thank you

  Vijay

• Gwetting a list of all virtual machines and used space

  
  I apologize for my very basic question.

  I need to make a file (better if an Excel file) with a list of all virtual machines in a simple 5.x vSphere infrastructure including 2 VMare ESXi 5.x servers and the disk space used (allocated, used) of each virtual computer.

  The easiest way seems to list the virtual machines from the vSphere client and export the list as a .xls file.

  It seems simple, but when I look at the file I see a lot of missing VMs or a large number of missing values for several virtual machines (just the Runts).

  Is this a problem with my vSphere client?

  I tried to create a PowerCli script using the "Get - VM|" Select-object Name"command, but my limited skills will let me extract the value of the used space.»

  Can someone please provide a sample of PowerCli I can just copy and use?

  Is there another way to get the information I need?

  Concerning

  Marius

  .

  Not knowing that if you have configured a cluster or just stand-alone hosts, here is one simple line...

  Get-VMHost-name | get - vm | select name, usedspaceGB

  From there, you can make formatting, get total usage etc.

• BAT file automatically launch several virtual machines

  I try to use the automatic VMware.exe software from starting my VMs (three) when restarting my Windows desktop computer.

  I have created a. BAT file creating three lines of code in the startup of the host folder.

  Each line is similar to:

  "C:\Program Files (x86\vmware\vmare workstation\VMWare.exe"-x "c:\users\admin\Documents\Virtual Machines\vm1\vm1.vmx".

  Each line calls the next VM to start.

  My problem is that the batch file runs the first line (i.e. - start the first virtual machine) but will not progress to the second and third lines (so from the second and third VM)

  Each line of code works perfectly if entered manually and individually in the command RUN in the host.

  What I'm missing here?
  
  

  Hi WoodZ and jmtella

  A big THANK you.  The vmRun command was the answer.

  The attached file renamed as StartVM.bat works for me...

  I welcome your critical comment

  See you soon,.

  Michael

• Upgrade to vcenter server 5.1 without interrupting display connections

  Dear Experts,

  We need to upgrade the server vcenter to 5.1. VMware Server connection view won't

  The ESX servers become 5.1 as well

  Work with

  -vmare vcenter server 5.0

  -connection to the server view vmare 5.0 (no linked clone, automated pool)

  -ESXi 5.0

  Plan:

  -In place move vcenter server 5.0 to vcenter server 5.1

  Question:

  -Could we perform the upgrade from vcenter without interrupting the view vmare machines?

  -Is that I have to restart the server view connection manager

  -During the upgrade, will be the loose connection to their machines?

  -During the upgrade, the user will be able to authenticate, start their machines?

  Thank you for your support

  Wines

  [email protected]

  Dear Experts,

  -Could we perform the upgrade from vcenter without interrupting the view vmare machines?

  -Is that I have to restart the server view connection manager

  -During the upgrade, will be the loose connection to their machines?

  -During the upgrade, the user will be able to authenticate, start their machines?

  Thank you for your support

  Wines

  1: Yes

  2: no

  3: no

  4: depends on what policies of power you are using.  Since vCenter is going to be offline you won't be able to start and stop machines.  The best thing is to change your feeding strategy for always under tension and ensure that all machines are available during the interview of vCenter.

• Syslog Collector 5.1 configuration change

  Hello

  Could someone tell me how I can check my Syslog collector configuration? (not on Vcenter)

  I want to change the size of the log file and add more rotation.

  I edited the file vmware - syslog.xml in C:\programdata\vmare\...

  I restarted the service.

  But how can I chek my Esxi 5.1 if the correct setting is used?

  I already checked the configuration advancerd, Syslog, but it's always the old settings...

  Last question, I use Syslog with Esxi 4.1 5.1?

  Thank you!

  This KB is to configure syslog on ESXi 4.x: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1016621

  ESXi 4.x syslogging is different from a 5.1, options may vary...

  Basically, as long as the syslogs arrive in your folders set to your syslog server then your server is set up correctly, as you have already found the xml file that you can modify records it y...

  That's all.

• VMware has stopped working.

  Hello

  I installed VMware 8.0.1. And later go back. I ran it sometimes but reccently I saw a problem. When I select backtrack then it just show me

  
  

  Cannot open '\\.\Global\vmx86' kernel device: the system cannot find the specified file. Did reboot you after installing VMware Workstation?

  Could not initialize the surveillance apparatus.

  And when I close the dialoge box, then another box of watch:

  Cannot find a valid peers to connect to.

  I searched in google for it. But do not gofind any solution.

  I run VMware as administaror. I reinstall again. But does not work.

  I usinng windows 7. And the latest version of vmare Backtrack.

  Any suggestion please.

  This means that your workstation is not installed correctly.
  Uninstall - reboot - reboot - reinstall

• Update from the update 2 to day 4

  Hello

  I have 3 servers ESX Server in a cluster and Vcenter 4.

  The ESX hosts run Update 2.

  I want to improve the ESX and Vcenter for update 4.

  This is the process:

  Each host to update update 4 - using the cd

  update to update vcenter 4

  Thanks in advance.

  Amel says:

  see upgrade scenarios for example in the upgrade guide and choose one that fits.

  http://www.VMware.com/PDF/vSphere4/r40_u1/vsp_40_u1_upgrade_guide.PDF

  Here's the simplified sequence of an upgrade to vSphere.

  1. turn on the vCenter server.

  2. upgrade to host.

  3. switch to virtual machine hardware level.

  4. upgrade VMware tools.

  step by step wrong-

  is the right

  1. turn on the vCenter server.

  2. upgrade to host.

  3 strengthen VMare tools

  4. switch to virtual hardware level

  BUT

  upgrade of update 2 to 4 have no changes in virtual material, only the VMware tools