VMDK file between windows and ESXi with VMFS on iSCSI copy

Similar Questions

• Sharing files between Windows and SAN VMFS

  Hello

  I just started the implementation of VMware and have no previous experience with it, so it's been fun.

  I have VMware ESX4 and vSphere works 2 host cluster, ha and FC connections to a San.

  Host1

  Host2

  are both connected to a LUN (vmfs) where I p2v of 600 GB has 2 comments for the test servers.

  Everything works fine, but I want to know now, how do I get the ISO files I have on our area (windows), and I want to bring on the 600 GB LUNS in their own directory so I can load then OS new machines to the host.

  (1) how can I do this?

  1.1) can I take vCenter machine we have and which connect to the LUN (Windows Server 2008)?

  1.2) can the vCenter Server running Windows read the VMFS? or is that something should be added to the machine.

  Thank you

  Hey,.

  If you click right a data store, you will see 2 icons allowing you to download files and download files.

  You can if you wish, use a tool to make the copy as winscp or Fastscp

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

  ~ y

• How to share files between Windows XP and Windows 7 without password?

  Hey guys, I want to share files between windows 7 and windows XP. I don't want to put the password on my Windows 7 or Windows XP account. I am going on my Windows XP perfectly shared files from Windows 7, but I am not able to go on my files of windows 7, the cause of my XP he asks user name and password. I enter the user name and it does not accept it if I make a password for my windows 7 and enter as the user name... I don't know what to do guys any help?

  Windows 7 only WILL NOT allow you to share files without a password, it's all just a common sense safety requirement.  It of a very bad practice to run your Windows installations with a null value, a password, give your facility a valid password.

  The simplest around your problem is to create an account with the same names and passwords on each machine and so typed the password when the connection is too a problem allow AutoLogon on the machines.

  John

• I need to share files between windows xp and Windows 7

  I am unable to share files between Windows XP Home Edition and Windows 7 Ultimate edition

  I have a wireless router and my two computers are connected on it.

  Please give me detailed guidelines on how to share files between them.

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response. MS - MVP - Elephant Boy computers - don't panic!

• I'm trying to implement the sharing of files between WinVista and windows 8

  When I atemp to sign I get a notice of password on my computer windows laptop 8. Every password I use does not work.

  Hello

  Thanks for posting your question in the Microsoft Community

  According the description preceding, you aren't able to make sharing files between Windows vista at Windows 8. I'll be happy to help you on this question.

  What sign in are you referring?

  I suggest you to see the following links on passwords:

  What to do if you forget your Windows password
  http://Windows.Microsoft.com/en-us/Windows-8/forgot-Windows-password

  The information is not sufficient to answer your question. Answer us with more information by answering the above questions.

• JavaScript - the difference between ' window ' and 'document.'?

  Hello

  I'm a Javascript newbie which ended just by the first screen of Captivate (CP9) (HTML5) using Javascript.

  A slide with several text entry areas (TEBs) and a Submit button, which performs a function to validate the TEBs (thank you David for have started me).

  I call the function in the script of the Submit button window and have Javascript code in the Index file.

  In the Javascript code, I used the ' windows ' and 'document '. (don't know if I've used them correctly but the works of Javascript)

  I don't really know the difference between them.

  In Javascript, I know that window is loaded in the browser first, then the document is loaded in the window.

  It's like the window is your browser window and the document is the HTML page inside.

  Also, you can use each of them to access specific properties - and window has a context.

  Some examples of my javascript:

  • window.cpAPIInterface.setVariableValue ("q1_fback", "");         -erase a message of feedback (text of legend with variable) associated with BER
  • document.getElementById("Text_Entry_Box1_inputField").style.border = 'solid red medium. "  -modification of the border of an object invalid BER (red)

  My question is:

  1. What is the difference between ' window ' and "document." in a context of Captivate?

  I will post you more questions to find out how:

  1 use loops to knock down my code

  2 reuse the same function in other slides

  Concerning

  Donal.

  Your assumptions are correct.

  the cpAPIInterface is in the window.

  The Text_Entry_Box1_inputField is in the document, not the window, but you can use:

  window.document.getElementById("Text_Entry_Box1_inputField").style.border = 'solid red medium. "

  Scope of variables depends on how and when they are declared, and it is generally best to limit their scope and not use them globally in the window object. All seem to be available in the cPs variables window.

• Sharing catalogs between Windows and OSX LR4

  I recently started using Lightroom 4 and was disappointed that I was unable to share my catalog between Windows and OSX as I could with LR2 and 3. The structure of the files has changed somehow? I mainly use a Windows computer at home, but when I travel, I have a MacBook Pro with the Mac of the LR4 version. All of my photos and catalogs are stored on a USB 3.0 external HARD drive. Although load catalog on a Mac shows all of my folders as question marks. It seems that Windows reads the disc as an indicator of the letter, ex. D:\ and OSX it reads as a volume. Used to before that this was not a problem. Does anyone know in a different way, I can get this to work specifically with this program. I already know that I can just download Boot Camp on my mac and run it like this.

  I think I found the answer to my own question. The catalogs that I have problems with were created with beta versions LR4. I just created a catalog using LR4 4.3 and loaded on the Win and perfectly good OSX. Hope this helps if anyone wants to try this out.

• Do not click on in the VM and can not move files between hosts and virtual

  Do not click on in the VM and can not move files between hosts and virtual

  Home - Windows XP x 64 Edition

  Virtual - Windows 2003 Web Edition

  -vmware.log

  ...

  sept 23 14:10:17.875: mks | Setting size 40 pile of thread to 1048576.
  sept 23 14:10:17.875: mks | Adjusting size of 41 of the stack of the thread to 1048576.
  sept 23 14:10:17.890: mks | USBGW: Writing referee op: 13 len:36
  sept 23 14:10:21.718: vcpu-0 | Unified TOOLS loop capacity requested by 'box to tools-MDN; now sending via the TECO
  sept 23 14:10:21.718: vcpu-0 | GuestRpc: Channel 7, toolbox-MDN app reviews.
  sept 23 14:10:21.718: vmx | DnDRegisterRpc: Rpc of DND already set to 1
  sept 23 14:10:21.718: vmx | CopyPasteRegisterRpc: already the value 1
  sept 23 14:10:21.890: vcpu-0 | VMXVmdb_LoadRawConfig: Loading of raw configuration
  sept 23 14:10:22.000: vmx | DnDRegisterRpc: Rpc of DND already set to 1
  sept 23 14:10:22.000: vmx | CopyPasteRegisterRpc: already the value 1
  sept 23 14:10:23.750: mks | USBGW: Writing referee op: 13 len:36
  sept 23 14:10:30.703: mks | Setting size 40 pile of thread to 1048576.
  sept 23 14:10:30.718: mks | Adjusting size of 41 of the stack of the thread to 1048576.

  ...

  Any ideas?

  Thank you

  If your license key allows, update your VMware Workstation version 7.1.4

  Otherwise, at least upgrade your VMware Workstation to version 7.0.1

  In the menu bar, help-> Check for Updates on the Web.

• is there a difference between 38 and 42mm with their pixel density?

  is there a difference between 38 and 42mm with their pixel density? the 38mm and 42mm watches have same interns?

  You can see the technical details of the Apple Watch here. Apple - Support - technical specifications

• I want to restore switch between windows and display the desktop icon

  a few days before these two icons was actually on the task bar and now I have deleted how restore it back
  (switch between windows and display the desktop icon)

  Hello

  Copy the new:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  To your user account to:

  C:\Users\launch of \AppData\Roaming\Microsoft\Internet Explorer\Quick

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Differences between ESX and ESXi

  Hai,

  As I am new to VI environment I doubt that where features ESX and ESXi are different, it may be stupid but can help me a lot.

  Hello

  Please check the link to the differences between ESX and ESXi below.

  http://www.VMware.com/products/vSphere/ESXi-and-ESX/compare.html

  Please note ESX is present in version 3.x, 4.x. starting vsphere 5.0, we have only ESXi.

  ESXi doesnot have a service console and has the smallest footprint of 70 MB and so is safer and more reliable, because it has a smaller surface set.

  Please allow points if you find the article useful.

  Thank you

  Aakash Jacob

• store of data sharing between ESX and ESXi?

  Hello everyone

  This is something I have not yet tried, but is it possible to share the same store of data between ESX and ESXi (version 4)?

  /MH

  Without a doubt.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• How can I share files between Windows 7 Pro and a Mac with os x?

  I have Windows 7 Professional and my colleague had a Mac with os x installed. We are physically in the same room, sharing a wifi connection. How to share files between two computers? That each of them should do on his computer?

  If you display links, please check beforehand that the procedure for the mac is here. I found in the internet or other of the procedures for older systems Win or network only between Win 7 PCs.
  

  MOSH

  Of course, you can do it easily. In fact, the implementation of sharing on Win7 last month was almost as easy as it is on OS X.  ;-) I find that the snow leopard has the same bugginess of show Windows machines only randomly in the sharing of the Finder section, as it did in Leopard, however. I usually connect to Windows machines by opening a window of Finder and using go > connect to server > smb://Windows-computer-name instead. In the Win7 box, I have the network to the desktop icon (you can get this to customize > change icon).

  On OS X, make sure you have checked in the file sharing system preferences > sharing. Click the Options button, and then select "share files and folders using SMB." Add the shared directories as you wish.

  You must create accounts/passwords user on the Mac and Windows 7. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop in Win7 (a particular user account) for convenience, you can do this.

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  You can find options to logon automatically for OS X in system preferences > accounts.

  On Win7, go to control panel > all items in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You do not want to use Homegroup.

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  Configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, Configuration File and Printer Sharing ON will take care of that for these machines, and if you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  OS X Firewall is done in System Preferences > Security. Click the lock to make changes, and then click the Advanced button to ensure that SMB sharing is allowed. If you set up in the share pod, it will be.

  On Win7, create shares as desired. I usually just share the Public, users desktop folder and all hard drives of additional data in the system. MS - MVP - Elephant Boy computers - don't panic!

• Cannot share media files between Windows Media Player 11 and my Samsung Galaxy Tab, error: connection to server lost

  Original title: Media sharing between Samsung Galaxy Tab and Windows Media Player 11

  Why my Windows Media Player 11 share media with my Samsung Galaxy Tab?  As soon as it connects and I try to play a movie, I get an error message no connection or connection to server lost.  What can I do to share multimedia files on my Galaxy Tab without getting this message?

  Hi SylviaSkeeter,

  (1) if it works well before?

  (2) remember to make changes?

  (3) how you try to sync or share media?

  (4) what is you receive the exact error message?

  You can use the software provided by Samsung to sync media, or you can use Windows Media Player.

  Method 1: Disable the security software and verify afterwards; Follow the steps mentioned in the link below

  Disable the antivirus software

  If you use a non-Microsoft security software, you can check the documentation provided with the program to achieve this.

  Important: Re activate security software once everything is done.

  Method 2: See the steps mentioned in the link below that relates to a similar question

  The problems of synchronization

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-sync-problems

  For more information, please visit the links below

  Set-up-a-device-to-sync-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  You cannot share media between Windows Media Player 11 and DMR such as Xbox 360

  http://support.Microsoft.com/kb/925708

• Sharing files between Windows Vista and Windows 7

  Have a PC running Windows Vista wired that you can share files on the remote laptop running Windows 7, but the laptop cannot see the main Vista PC.  So he can't share files or printers.  The laptop has no problem to access internet.

  Configure any firewall program to allow access by other computers on the local network.  Note that some antivirus programs include firewall features.

  For installation tips, see sharing files and printers with different versions of Windows and networking of computers running different Windows versions . Boulder computer Maven
  Most Microsoft Valuable Professional