Sharing files between Windows and SAN VMFS

Similar Questions

• Sharing catalogs between Windows and OSX LR4

  I recently started using Lightroom 4 and was disappointed that I was unable to share my catalog between Windows and OSX as I could with LR2 and 3. The structure of the files has changed somehow? I mainly use a Windows computer at home, but when I travel, I have a MacBook Pro with the Mac of the LR4 version. All of my photos and catalogs are stored on a USB 3.0 external HARD drive. Although load catalog on a Mac shows all of my folders as question marks. It seems that Windows reads the disc as an indicator of the letter, ex. D:\ and OSX it reads as a volume. Used to before that this was not a problem. Does anyone know in a different way, I can get this to work specifically with this program. I already know that I can just download Boot Camp on my mac and run it like this.

  I think I found the answer to my own question. The catalogs that I have problems with were created with beta versions LR4. I just created a catalog using LR4 4.3 and loaded on the Win and perfectly good OSX. Hope this helps if anyone wants to try this out.

• Sharing files between Windows 7 and Windows XP suddenly stops working

  I have a set up working groups between Windows 7 and Windows XP computers.  I don't usually have a problem of file sharing, but suddenly XP computers do not connect to the server from Windows 7.  It will work for a while and then stops.  In order to solve this problem, I have to restart the server from Windows 7.  However, this problem occurs more and more and I would have preferred to find a permanent solution.  I checked all the normal solutions (IE firewall, no passwords, etc.), but I still have this problem.  I'm sure that all my settings are correct, as I am able to connect most of the time, but I know that there must be a solution out there to fix it permanently.

  I read a post that I'm not sure is related to my question:

  This problem may occur if the IRPStackSize registry entry on the server is set too low. I was unable to connect to the XP PC from any other PC on the network. Set ip 15 and problems went
  

  If that is related, please let me know.

  What is a patch that I need to download for XP computers?

  Any help would be grateful.  Thank you!

  I suspect that the limit is 5 concurrent connections for Windows 7 Home Premium, but I still need to find a reference book Microsoft.
  _________________________
  ID #0227. If this answer was helpful, you can vote by clicking on the green triangle. If it solves the problem, click 'propose as answer. Thank you.

• Sharing files between Windows Vista and Windows 7

  Have a PC running Windows Vista wired that you can share files on the remote laptop running Windows 7, but the laptop cannot see the main Vista PC.  So he can't share files or printers.  The laptop has no problem to access internet.

  Configure any firewall program to allow access by other computers on the local network.  Note that some antivirus programs include firewall features.

  For installation tips, see sharing files and printers with different versions of Windows and networking of computers running different Windows versions . Boulder computer Maven
  Most Microsoft Valuable Professional

• VMDK file between windows and ESXi with VMFS on iSCSI copy

  Hi all!  I searched here and that you find that no good answer but then I hope that someone can help you.

  We have a group of 3 servers ESXi running off a single iSCSI target and often need to copy VM from the VMFS file system.

  To help the conversion tool is incredibly slow, it's on.  WinSCP and FastSCP work at about 5 MB and 3 MB/sec.  FTP is the best option so far, but it is only 8 MB/sec.  When we have to copy around a virtual machine that takes a lot of time of 20 GB.  In addition, when we make 15 copies of a VM is incredibly long.

  I hoped to be able to directly connect to the iSCSI target and mount the system files somehow, but can't seem to find a way to do it.  Defect is there any method better or faster?  Perhaps a better FTP server than the option of proftpd?

  We hoped a local copy with either USB or eSATA method, but doesn't seem to work.  USB is not detected even and I can not get a non-VMFS file system to mount via eSATA.

  If it works better we can set up a linux machine to mount iSCSI target if copies of file can work this way.

  Thanks for the tips!

  NFS?

• Problem with the sharing printers between WIndows & and Windows Xp

  I have a laser printer HP 1150 connected by USB on my computer Windows 7 (Home Premium 64-bit). I want to share with another pc with Xp Pro (SP3), but can not find a suitable printer driver. I read the thread on the sharing of printers and led most of the steps.

  My problem is that, although I can see the printer of the xp machine, it requires a driver. I had already installed the drivers from HP and the printer works fine by direct USB connection on the XP machine, but it appears that I need a driver installed on the W7 machine as well - and I can't seem to find one that works.

  Any ideas what to do?

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=238318&lang=en&cc=au&prodTypeId=18972&prodSeriesId=238316&TaskID=135

  Check HP drivers at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads

  Windows 7 Networking Forum at the link above.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• I'm trying to implement the sharing of files between WinVista and windows 8

  When I atemp to sign I get a notice of password on my computer windows laptop 8. Every password I use does not work.

  Hello

  Thanks for posting your question in the Microsoft Community

  According the description preceding, you aren't able to make sharing files between Windows vista at Windows 8. I'll be happy to help you on this question.

  What sign in are you referring?

  I suggest you to see the following links on passwords:

  What to do if you forget your Windows password
  http://Windows.Microsoft.com/en-us/Windows-8/forgot-Windows-password

  The information is not sufficient to answer your question. Answer us with more information by answering the above questions.

• How to share files between Windows XP and Windows 7 without password?

  Hey guys, I want to share files between windows 7 and windows XP. I don't want to put the password on my Windows 7 or Windows XP account. I am going on my Windows XP perfectly shared files from Windows 7, but I am not able to go on my files of windows 7, the cause of my XP he asks user name and password. I enter the user name and it does not accept it if I make a password for my windows 7 and enter as the user name... I don't know what to do guys any help?

  Windows 7 only WILL NOT allow you to share files without a password, it's all just a common sense safety requirement.  It of a very bad practice to run your Windows installations with a null value, a password, give your facility a valid password.

  The simplest around your problem is to create an account with the same names and passwords on each machine and so typed the password when the connection is too a problem allow AutoLogon on the machines.

  John

• I need to share files between windows xp and Windows 7

  I am unable to share files between Windows XP Home Edition and Windows 7 Ultimate edition

  I have a wireless router and my two computers are connected on it.

  Please give me detailed guidelines on how to share files between them.

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response. MS - MVP - Elephant Boy computers - don't panic!

• How to share files between Windows 7, Windows 8, Windows 8.1 program technical preview 10 Quad-starting Windows

  Tips for sharing files between multiple versions of windows program without having to reinstall the programs? Any responses appreciated.

  There is no way to share programs/apps between OS when multi boot, IE; you can not install MS Office on W10TP and expect to use on other operating systems, you can share the data in the program, each operating system will require that individual programs / applications are installed on each operating system.

• JavaScript - the difference between ' window ' and 'document.'?

  Hello

  I'm a Javascript newbie which ended just by the first screen of Captivate (CP9) (HTML5) using Javascript.

  A slide with several text entry areas (TEBs) and a Submit button, which performs a function to validate the TEBs (thank you David for have started me).

  I call the function in the script of the Submit button window and have Javascript code in the Index file.

  In the Javascript code, I used the ' windows ' and 'document '. (don't know if I've used them correctly but the works of Javascript)

  I don't really know the difference between them.

  In Javascript, I know that window is loaded in the browser first, then the document is loaded in the window.

  It's like the window is your browser window and the document is the HTML page inside.

  Also, you can use each of them to access specific properties - and window has a context.

  Some examples of my javascript:

  • window.cpAPIInterface.setVariableValue ("q1_fback", "");         -erase a message of feedback (text of legend with variable) associated with BER
  • document.getElementById("Text_Entry_Box1_inputField").style.border = 'solid red medium. "  -modification of the border of an object invalid BER (red)

  My question is:

  1. What is the difference between ' window ' and "document." in a context of Captivate?

  I will post you more questions to find out how:

  1 use loops to knock down my code

  2 reuse the same function in other slides

  Concerning

  Donal.

  Your assumptions are correct.

  the cpAPIInterface is in the window.

  The Text_Entry_Box1_inputField is in the document, not the window, but you can use:

  window.document.getElementById("Text_Entry_Box1_inputField").style.border = 'solid red medium. "

  Scope of variables depends on how and when they are declared, and it is generally best to limit their scope and not use them globally in the window object. All seem to be available in the cPs variables window.

• Do not click on in the VM and can not move files between hosts and virtual

  Do not click on in the VM and can not move files between hosts and virtual

  Home - Windows XP x 64 Edition

  Virtual - Windows 2003 Web Edition

  -vmware.log

  ...

  sept 23 14:10:17.875: mks | Setting size 40 pile of thread to 1048576.
  sept 23 14:10:17.875: mks | Adjusting size of 41 of the stack of the thread to 1048576.
  sept 23 14:10:17.890: mks | USBGW: Writing referee op: 13 len:36
  sept 23 14:10:21.718: vcpu-0 | Unified TOOLS loop capacity requested by 'box to tools-MDN; now sending via the TECO
  sept 23 14:10:21.718: vcpu-0 | GuestRpc: Channel 7, toolbox-MDN app reviews.
  sept 23 14:10:21.718: vmx | DnDRegisterRpc: Rpc of DND already set to 1
  sept 23 14:10:21.718: vmx | CopyPasteRegisterRpc: already the value 1
  sept 23 14:10:21.890: vcpu-0 | VMXVmdb_LoadRawConfig: Loading of raw configuration
  sept 23 14:10:22.000: vmx | DnDRegisterRpc: Rpc of DND already set to 1
  sept 23 14:10:22.000: vmx | CopyPasteRegisterRpc: already the value 1
  sept 23 14:10:23.750: mks | USBGW: Writing referee op: 13 len:36
  sept 23 14:10:30.703: mks | Setting size 40 pile of thread to 1048576.
  sept 23 14:10:30.718: mks | Adjusting size of 41 of the stack of the thread to 1048576.

  ...

  Any ideas?

  Thank you

  If your license key allows, update your VMware Workstation version 7.1.4

  Otherwise, at least upgrade your VMware Workstation to version 7.0.1

  In the menu bar, help-> Check for Updates on the Web.

• I want to restore switch between windows and display the desktop icon

  a few days before these two icons was actually on the task bar and now I have deleted how restore it back
  (switch between windows and display the desktop icon)

  Hello

  Copy the new:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  To your user account to:

  C:\Users\launch of \AppData\Roaming\Microsoft\Internet Explorer\Quick

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Sharing files between the Sierra of MacOS and Windows 10

  I'm using a Mac that runs by the Sierra of the OS and a Windows 10 pc. I want to share my files between for theses on my WiFi network. But I don't know how to set up. Can someone please help me to move forward? Thanks in advance.

  Greetings md firdaus,

  Thank you for using communities of Apple Support. It seems you want to share files from your Mac on a Windows computer.
  I recommend you to read this article, it may be able to help to implement the sharing between two computers.
  

  macOS Sierra: set up a Mac to share files with Windows users

  Take care.

• Sharing data between Windows Vista and Windows 7

  As Windows Vista cannot join the homegroup, which is a feature of Windows 7, how the files, folders or drives are shared between Windows Vista and Windows 7?

  Hello

  Set you up a network between Vista and Windows 7:

  "Networking of computers running different versions of Windows.

  http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-7

  "Learn how share files and printers on a network with computers running.
  Windows XP, Windows Vista and Windows 7. ... This article also covers the
  necessary parameters to set up file and printer sharing on your network. »

  See you soon.