VMkernel advanced - option effective vs next restart value

Similar Questions

• Updates to Windows during the stoppage has not taken effect and the same updates (16 of them) keep coming back in the next restart.

  Original title: Windows updates has not taken effect.

  My Windows updates during the shutdown did not effect. The same updates (16 of them) keep coming back in the next restart.

  I tried fixed it 50461 mentioned in one post, but the problem persists.

  Any help to appreciate.

  Hi Lee CC,.

  1 windows operating system you are using?

  2. you receive an error code or error messages?

  3. Why have you tried the Fixit 50461? Have you received a 646 error?

  This problem can occur if updates failed to install.

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  You can also read the following article and check if it helps.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Best method of automation by adding a value in the comments advanced options

  I need to add a value in the advanced options in all my virtual machines, which means I have to turn them off, change the configuration and turn on again them.

  I was wondering what is the best method if automate this since I did not intend to do it manually (if this is a bit special virtual machine).

  The environment is vSphere with vCenter 4.1 4.1 and VMs are Windows Server and Linux SLES.

  Somebody had to do something similar?

  Hello, caddo-

  A way to add a setting to a virtual machine is to use a VirtualMachineConfigSpec and the ReconfigVM() of a VirtualMachine object method.  So, for the advanced option that you mentioned, you can use something like:

  ## the name of the VM to reconfig$strMyVMName = "someVM0"$vmMyVM = Get-VM $strMyVMName
  
  ## create a new ConfigSpec to configure the VM$spec = New-Object VMware.Vim.VirtualMachineConfigSpec -Property @{    extraConfig = New-Object VMware.Vim.OptionValue -Property @{        Key = "monitor_control.disable_mmu_largepages"        Value = "TRUE"    } ## end new-object OptionValue} ## end new-object ConfigSpec
  
  ## reconfig the VM with the given ConfigSpec$vmMyVM.ExtensionData.ReconfigVM($spec)
  
  ## update the VM's View data$vmMyVM.ExtensionData.UpdateViewData("Config.ExtraConfig")
  
  ## check the advanced option setting (ExtraConfig item)$vmMyVM.ExtensionData.Config.ExtraConfig | ?{$_.Key -eq "monitor_control.disable_mmu_largepages"}
  

  This establishes the additional configuration for a virtual machine.  You can adjust easily to many/all virtual machines (date you probably pass by using the ReconfigVM_Task() method, which runs asynchronously).  Enjoy.

• When I turn on my windows XP computer, I still get to the Windows Advanced options menu. that pressure?

  WINDOWS XP my computer came during a break current, but when I turned it back on it keeps going to the windows advanced option menu? Safe mode button is not do anything or start windows normally. Don't know what to do?

  You can select "Disable automatic restart in the event of system failure" and the next time that the system restarts, you should get the "Blue Screen of Death" (BSOD).  This will include a stop code and other diagnostic information that can help people help you here.

  (text below in italics with the permission of L elder)

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text, unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  However, more than likely your system files has been corrupted by the power failure.  Use your genuine Windows XP installation CD to start the Recovery Console:
  (see http://pcsupport.about.com/od/fixtheproblem/ss/rconsole.htm)

  1. Put the CD into the computer and restart
  2. When the message "press any key to boot from the CD" press a key (if you don't see this message, you will need to enter your BIOS and set the boot order to boot from CD first) (if you don't know how to set up your BIOS, see http://pcsupport.about.com/od/fixtheproblem/ss/bootorderchange.htm)
  3. Once the files load from the CD, press R to enter the Recovery Console
  4. You can get about choosing an installation; the usual answer is C:\Windows
  5. If you have set a password for the 'Administrator' account, enter it now; the default is blank (no password)

  At the command prompt (C:\Windows >) type the following and press enter

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  If you don't actually have a real Windows XP installation CD, you got nothing to worry about.  Follow the instructions of the elder s below:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).
  

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.
  

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Unfortunately, I'll be away from my computer for the next 2 or 3 days... then if the above does not help, and that no one else jumps, have patience.
  

• Airport Utility iOS advanced options disappear

  This morning, I noticed that my AU on iOS has none of the advanced options. The option restart also disappeared. There are two changes that have taken place:

  1) instituted by domain controller of origin with AD, DNS, and DHCP. Always had advanced options immediately after and was able to restart remotely HQ Airport Extreme.

  (2) upgraded to iOS 9.2. Did not consider new utility until AFTER the update.

  Basically everything I have now is the following:

  Base station > name and password

  Network > wifi ssid and password

  network invited

  Internet connection > ip and dns settings

  all other parameters have completely disappeared on ipad and iphone. Note that are present on mac os x (10.11.2) and have not changed. All others this experience or comments?

  The answer came. It's a bit delayed by protesting, but apparently if you provide a domain, DHCP and DNS internal controller, these options are not available. As soon as I stop the server, default DNS settings my ISP and open the DHCP range, everything is back. Pain during the execution of some servers, but at least I know now.

• UNMOUNTABLE_BOOT_VOLUME error - I get this on a "blue screen" page, and the only other page that I see is the display advanced options. None of the items I selected in this list nothing do for me.

  I can't get past the blue screen on my PC.  I tried to reinstall the system, but all I get is blue screen as described above with the "unmountable_boot_volume" error or the display advanced options when I restart my pc and press F8 immediately.  I tried each of the options on the screen advanced options, nothing happens.  Can anyone help?  Thank you!

  Hi Debbie,.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?

  See the Microsoft article and try the steps mentioned, check if it helps.

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

  http://support.Microsoft.com/kb/297185

• Options-> Advanced Options-> question of PTC

  Hi guys.

  I certify on the TCP parameters.

  You know that BB has options for TCP (Settings / Options-> Advanced Options-> TCP: "APN", "APN username" and "Password for APN").

  Can I connect via HttpConnection without any configuration (without suffix: ";) APN = wap.cingular; tunnelauthusername = user; tunnelauthpassword = password'), when the user set above parameters such as "APN is wap.cingular", "[email protected] username" and "password for APN = cingular1?

  In other words, if the user set Options / settings-> Advanced Options-> TCP, I must determine '; APN = wap.cingular; tunnelauthusername = user; tunnelauthpassword = password '.

  Is this good?

  If the user has not indicated the Options / settings-> Advanced Options-> TCP, I need set up: «;» APN = wap.cingular; tunnelauthusername = user; tunnelauthpassword = password '.

  Is this good?

  Thank you.

  Your interpretation is correct.  The TCP (not PTC) options are used only if there is no value specified in the connection URL.

  Not that different carriers may have different requirements, for example, I understand Verizon don't require any setting at all for deviceside = true for work.

• Unable to set vpxd.das.electionWaitTimeSec parameter configuartion advanced in the sphere ha advanced options.

  Hi all

  I need this help as soon as possible because I am struck because of this. I am using vcenter server 5.1 and that you want to set vpxd.das.electionWaitTimeSec = 240, given that ha configuration on hosts when added to the cluster has failed due to timeout I wanted to put this value. but when I try to put am getting error ' a specified parameter was not correct.bad HA keys:config.vpxd.das.electionWaitTimeSec:bad the option of advanced value. "

  I tried all the vmware docs but no use.

  Thank you

  SP

  It is not a HA advanced option but an advanced option of vCenter. You can set these to a vCenter level as follows:

  • In the vSphere Client: click on 'Administration' and "vCenter Server Settings", click "Advanced settings".
  • In the Web Client: click on 'vCenter', "vCenter Servers", select the appropriate Server vCenter server and click the 'Manage' tab, click on 'Settings' and 'advanced settings '.

  I will publish an article in a few minutes to explain it,

• Try to change DRS Advanced Options

  I am writing a quick Powershell script to change the following Advanced DRS option:

  MinPoweredOnCpuCapacity

  Basically, the idea is to set high for the hours of work and he works down during off-peak hours.

  I got so far and I'm really close to printing:

  to connect-viserver

  $view = (get-View (Get-Cluster Cluster1). ID)

  I can see the option that I already put here:

  $view. Configuration.DrsConfig.Option

  DynamicType DynamicProperty key value

  ---                                             -

  ---

  -

  ---

  -

  ---

  MinPoweredOnCpuCapacity 90000

  Here is how I tried ot set:

  $opt = new-Object VMWAre.vim.OptionValue

  $opt. Key = "MinPoweredOnCpuCapacity".

  $opt = 1 value.

  $spec = new-Object VMware.VIm.ClusterConfigSpecEx

  $spec. DrsConfig = New-Object Vmware.vim.ClusterDrsConfigInfo

  $spec. DrsConfig.option = $opt

  $view. ReconfigureComputeResource ($spec, $true)

  This last command will fail with the following message is displayed:

  Exception by calling 'ReconfigureComputeResource' with '2' or the arguments: "it was not correct to specified parameters.

  "DRS advanced option: MinPoweredOnCpuCapacity.

  On line: 1 char: 33

  + $view. ReconfigureComputeResource < < < < ($spec, $true)

  + CategoryInfo: NotSpecified: ( [], MethodInvocationException)

  + FullyQualifiedErrorId: DotNetMethodException

  Any ideas on how to do this?

  Thank you!

  Contrary to what shows the reference for the software development kit, the value property must be a string.

  It will work

  $opt = New-Object VMWAre.vim.OptionValue
  $opt.Key = "MinPoweredOnCpuCapacity"
  $opt.Value = [string]1
  $spec = New-Object VMware.VIm.ClusterConfigSpecEx
  $spec.DrsConfig = New-Object Vmware.vim.ClusterDrsConfigInfo
  $spec.DrsConfig.option = $opt
  $view.ReconfigureComputeResource($spec, $true)
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Create an advanced lightning effect and then export it to the transparent PNG sequence

  Hello

  I am new to AE, so please be gentle

  I need to generate a lightning effect, then export the images to several PNG images.

  I figured out how to make lightning and export the png transparent, but I can't get rid of the background lightning Uni (which is black in my case).

  Do you have any advice?

  When you apply the lightning effect advanced to a solid, the default values of composition effect the effect on transparency.  You must have other layers in your computer, or you have changed the default setting.

  Turn off the visibility of the other layers, or change to Composite the effect on the frame and you should have transparency.  If you do not, you're hurting your PNG sequence by including only not the Alpha channel.

• HP ENVY 4500 all-in-one: ENVY 4500 advance Options

  How to add or remove in the menu the paper size set in the Advanced Options screen?

  Hello

  You cannot delete but you can add custom formats. This can change when you change your computer, change OS, re - install the driver. Printer driver keep his list by default only.

  Kind regards.

• In the Advanced Options Menu that I used to have a last good known Configuration to select who is gone?

  A while back I had to have my hard drive formatted and windows re-installed.  Advanced options, used to have a selection for the last good known Configuration. This selection is no longer there, but the other options as the safe mode and Boot normally.  This was a result of the hard drive being formatted? I'm more worried if this indicates a problem with the hard drive?

  I've since upgraded to Windows XP, which has the system restore, so I don't know if the last known Configuration Option is necessary.

  Let me be frank.

  This system is an old Windows 2000 upgraded to XP and it is low on RAM (384 MB) and low processor speed ~ 977 Mhz.

  If you are thinking about replacing/upgrading, it would be a wise investment.

  I know how to get emotionally attached to an older system, but one day you just I have to bite the bullet and get something more modern.

  You may he likes not at first and can hate him, but with some time and when you get your new system composed with your exact settings you like, you'll start to it.

  I've got 6 systems here who have bitten the teeth and never before seen power in months, but I can donate or use parts for someone who's biggest thrill in the world and what brings him smile in their face is playing Solitaire on a computer (or a visit to a dog... it's what I do sometimes).

  If you have problems with XP, I can help you with this better than I can, but your system specs are barely minimum for a good system in XP.  You could probably make it work, but it often curse you that you operate.

  That's just my opinion by observation.

• -L' stop six options that are next to the lock button in the task in the task bar disappear from my computer.

  -The six closure options that are next to the lock button in the taskbar disappear from the my computer. When I click on the arrow next to the lock button, my only computer log screen and lock up instead of six normally closed options i.e (change user, locking, lock, re - start, suspend and logoff.)
  -The first step, I took is to check for assistance and support in my system, and I could not find a guide on how to restore six back closure options.
  -There is not any notification of any errors.
  -My product/name of Microsoft's Windows vista Home Basic edition. Model: Compaq presario CQ60 Notebook PC
  All I want is no details to restore my missing shutdown options. Or if you can restore it for me online.

  Hello

  • What were the changes made before the problem occurred?

  You can view these methods:

  Method 1:

  I suggest you to start your computer in safe mode with network and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try the SFC scan on the computer in mode noraml.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:

  Run a full scan with your antivirus software and removal of malware/spyware.

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  Malware:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-to-get-rid-of-malware/ba80504b-61f1-4D71-960f-b561798b7b42

  Method 4:

  You could also try to perform a system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• F8 key does not have the advanced option!

  CS_SystemLabel

  XPS 15 (9530, end of 2013)

  CS_OperatingSystem

  Windows 8

  I want to do a factory reset and return to the first configuration of my Dell XPS, but when I click F8, it won't go to advanced options, as it normally should, I clicked several times on the F8 key before and after and and each time, but it never shows the advanced options should be , can help you on this? Thank you

  yorlink

  I managed as well to recover my product key OEM Windows 8.1 :)

  Now, I've left two questions:

  (1) why the F8 key does not work as it should!

  (2) where the recovery partition? I mean I say I format the C: / drive, I'll still be able to save the factory OS or this partition is located in another hidden partition?

  In fact my XPS is still under warranty, but when I contacted DELL support they told me by email that they are not able to call me because the PC was purchased from the United Kingdom and that I am not located in the United Kingdom they call me not, turn on! and after that, I asked just for the answers to my questions, but they still didn't have answer,

  Just don't call it premium support because it is not

  1. the UEFI BIOS and SecureBoot so that the change in the way Windows 8.1 boots. So that the 8.1 Windows start faster than Windows 7, there is almost no time for the user to type F8. This method to access boot options is obsolete as Windows 8.1 simply boots to fast.

  To get started, hold the SHIFT key while rebooting. Please see here for more details:

  https://www.YouTube.com/watch?v=fqqgk2fOtGU&index=5&list=PL1RkaknDn7v88-b9HVWAauoWSHDQhoe4w

  2. the recovery partition resides on the same hard drive as a partition unlabelled. Check out this guide here, when I was testing Dell Backup and Recovery on a clean install using the version 1.7.1.2:

  https://www.YouTube.com/watch?v=xKJjg0VAkIQ&list=PL1RkaknDn7v88-b9HVWAauoWSHDQhoe4w&index=1

  Should not be in this version that the recovery partition has been labeled and this has been fixed in version 1.7.5.64.

• Dell Inspiron 531 - summer pc try to restore factory settings and hit the F8 key after close to a dozen times. I never see the advanced options to choose the factory restore. HELP please...

  tried to restore factory settings and hit the F8 key after close to a dozen times.  I never see the advanced options to choose the factory restore.   HELP please...  I'm following indications out of Dell's web site as well.    UGH

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  If you have problems with the process of recovery of Dell, contact Dell at the link above.

  It's Dell recovery, not Microsoft software/process of.

  See you soon.

  Mick Murphy - Microsoft partner