VMotion: A large private VLAN or several small VLAN for each cluster?

Similar Questions

• Cisco ISE 1.3 - Mab authentication with a vlan for each foor

  Hello

  A client wants to implement authentication MAB with a vlan for each floor. I found a solution of Loïc

  I have set up the following:

  -the profile of different authentication with a vlan different.

  -Add the endpoint (printer etc) endpoint identity.

  -create endpoint group identity that end point of recall.

  -create a rule to authorizzation reminding all work and element... in the end.

  Do you know if there is a faster way where another way to solve the problem?

  Thank you all

  Well, mab in some environments, could be replaced by profiling and for rules, rather af with a rule authz for each floor, you can name your VLAN in your eponymous switches to "Printers", in the world, then you would only need an authz rule, where you use the name of the vlan instead of identification number, so no matter where this printer , it will end in the vlan 'Printer', whatever it is in this specific switch.

• I am trying to use the mega services esign signature feature; I need to send a document where several people sign for each document.

  Within the services of e-sign, I need to use mega sign where each document is signed by several receivers. When manually send the document, I was able to send an email form 'one' twice so when it is signed once, it will send the form even for the additional signature.

  Hello Ji-Sung,

  MegaSign function is available in the account of enterprise-level and this is reference material:

  https://helpx.Adobe.com/document-cloud/help/sending-megasign-using-CSV-file.html

  Let me know if you need more information.

  -Usman

• You want to edit a large file containing 100 minutes of audio digital into several smaller files in Windows Media Player.

  Original title: make a Simple Audio editing.

  I have a large file containing 100 minutes of audio digital I need to split into several smaller files.  The biggest file is on my desk. How do I do this on Windows Media Player?

  I have and older Version of WMP.   Can I download a more RECENT version of Windows Media Player or keep the one which currently?  Thank you!

  Booboothefool

  Hello

  ·         What type of audio file?

  ·         What version of Windows Media Player you have installed?

  You can use your favorite search engine to find a program that can modify the file.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  In addition, follow this link to add files in Windows Media Player.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/library#section_1

  Hope the helps of information.

  Please post back and we do know.

• Remove the performance of a large table or several small tables.

  I have a table with 30 million lines, that is used in a statistic application developed in home treatment.
  
  In the process, there is an application that will scan old records and then remove them from the database.
  
  I'm looking for a way to improve it, and I am currently faced with alternatives:
  
  Option #1
  Separate the old records into several smaller tables, and then run several copies of the application, a single instance of the application by the smaller table.
  
  Option #2
  Use additional criteria to when choosing the rows of the table (which would be indexed on), an execution mulltiple of copies of the application based on the criteria.
  
  From a logistical point of view, I'd prefer Option #2, my only concern with him is what's performance comparrison between:
  
  50 processes Delete form 50 small individual tables with 100,000 rows in each
  vs
  50 to a table with more than 30 million lines removal process
  
  Anyone has any experience on a preview?
  
  We use an instance of Oracle 9i, no partitioning.
  
  Unfortunately I don't have a lot of control in the application or make major changes to Oracle.

  940507 wrote:
  It redundant seams, one of the reasons why I prefer Option 2, using additional criteria...

  I just need to make sure that when 20 process attempts to remove it from the same table with 30 + million lines, the contetion on the updating of the table, index... will not introduce a point of suffocation.

  This can vary widely based on the distribution of data and model of data access. Oracle accesses data in blocks, so if someone updates an another line of the block while you delete, you could get a transaction wait. For playback from your deletion, Oracle is good, not blocking, but compromise can be a lot of waiting. If your data in the table such as two of your processes to remove from the same block, you could come back here crying on the performance and have people laugh design.

  Rather than the mud things with more java spawning process, you may need to perform these deletions by a single stored procedure with very specific criteria. Then, rather that dealing with the issues of contention, you serialize everything to go as soon as possible and reduce to a minimum the block copy and cancel demand to keep multiuser. Oracle is biased in favor of adding data instead of delete, add will always be potentially more fast-able.

  Think about this: http://jonathanlewis.wordpress.com/2011/04/19/more-cr/

• The publication of large files in several small?

  Hello everyone.

  I have a project, almost 16 MB. It; quite large s and users must wait a while to get the tutorial.

  I tried this. I divided the porject in various projects such as 1. menu, 2. Description, 3. practice. and then I link the menu projeect description, convenient and so on. So it works very well! I think it is a good solution to stop the annoyance of students. Now, there's a small problem on this... THE TABLE OF CONTENTS. For each project, there is a table of contents.

  So, how can I do to get the same table of contents in all projects? or better yet, how can do to publish the entire project, but as streaming, I mean instead of loading the 16 MB that I want it to load deppending on the slide with the student. Is this possible?

  1 million thanks!

  Ben

  Hello

  There are a lot of variables involved here, such as Captivate version as well as the way in which you present to the table of contents.

  If you are using Captivate 3, perhaps explore the MenuBuilder application.

  If you are using Captivate 4 or 5, you might consider using the application of the aggregator.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• What are the causes my screen to instantly display several small pages?

  What are the causes my screen to instantly display several small pages?

  Your username appears to be rather ironic.

  Given the richness of the information you provided, I guess, whatever the version of Pages that you use, you've opened the model selector.

  Peter

• How to cut the big text in several small files of text file?

  Hi all

  I got a big text file.  Notepad could not open it.  I want to cut it into several small files-texts so that I can open and check it out.  I use "set the file position" and 'set the size of the file', but it still gives me the part of the start file.  I would like to, say, four small files, in the first quarter, the sencond quarter, in the third quarter and in the fourth quarter to each file.

  How? Seems very simple question. I miss...

  Many thanks for any help.

  Anne

  Hi Anne,.

  Just read the blocks of the file in a loop...

  

• Issue of private VLAN

  Hello

  I want to configure private VLANs on cisco switch science I write this command (host of the private vlan switchport mode) on the interface automatically interface to go down, please help me

  I'm not sure that the 3560 supports VLAN private dashboard, but it supports the ports protected with "protected" switchport mode

  Here is the guide on this feature.

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst3560/software/release/12-2_52_se/configuration/guide/3560scg/swtrafc.html#wp1175133

• Switches 2950 with private - vlan

  Hello experts!

  Do you know if switches 2950 private vlan suport? I have updated to IOS and try to configure PVLAN, but this model of switch is not the interface mode command "switchport private - vlan".

  Best regards

  Rodrigo has.

  2950 supports onboard PVLAN don't, which differs from the private VLAN.

  The following link has the support matrix for pvlan on all Cisco switches.

  http://www.Cisco.com/en/us/products/hw/switches/ps708/products_tech_note09186a0080094830.shtml

• Configuration of VLAN for vMotion (ESXi 5.1 update 3)

  Hello

  We use a cluster of ESXi 5.1 updated 3 guests with Enterprise Edition.

  Finally, our network is being upgraded and VLAN will be created for vMotion.  Currently, we use the local network for the management and vMotion (I know that's not good).

  Network administrator asks me to provide information concerning the requirement of the VLAN for vMotion.

  Is there any Document KB I can refer to mentioning that the administrator must put in place in the physical switch and I need to change in each vSwitch for vMotion on all ESXi hosts?

  Thank you

  Belong to your network administrator if it can link your vmotion IP to the same vlan that he will provide den it's possible.

  Otherwise, you will have to go to the configuration of your network administrator. so it can provide you the IP for the ports of vmotion.

• How can I place several smaller images of varying size on one page for printing without losing the original size.  Board contact option to resize my pictures

  Does anyone know how to place several small pictures on a single page, so I can print them out as a rather print over and over again.  I want to maintain the original size of the images that vary somewhat.  I tried to use the option of the Board-contact, but he seems to want to resize my images which unfortunately is of no use to me.  I tried to cut and paste on a new page, but I don't think that it is now the original size.

  Alternative applications sometimes can provide quick and easy results.

  It might be interesting to download the demo version of Photoline: it includes a simple Board-contact option that allows for images to be included without loss of resolution, i.e. the original is left intact and the proportions remain unchanged. Since Photoline also supports documents several pages, all the thumbnails are collected into rows and columns, the user can control and the end result can be exported as PDF.

  -Download the trial of pl32.com

  -Open Photoline, then open the browser (CTRL/CMD (B)

  -Navigate to your folder with the images you want to combine for printing.

  -right mouse click in the thumbnail view, and then select "Create image Catalog.

  -Select the page by Page size

  -under 'Size' define the number of rows and columns (there are here a translation error: "Spalten (COL) / rows (lines)".)

  -Uncheck "scale photos physically." This ensures that the original images are intact and incorporated in full resolution.

  And then click OK.

  Some of the other testing devices until you get a satisfactory result. Then export it to PDF.

• Small budget for lovers lenses

  Dear friends

  I have a 600 D with the 18-135 kit lens.

  Recently I suggested a 50 mm 1.8 in this forum. Many thanks for the tip. Love this lens.

  I want to develop my lens kit without rushing in big pass right now.

  Asked to recommend 2 lens more that can be really useful for amateur photography.

  I have noted the following

  1. Although the 50 mm 1.8 is good, I struggle to us at events like weddings etc where closer physically is not always possible.

  2. my 18-135 kit lens is good. But with zoom, opening cannot be wide open. Background become difficult with that.

  3. for outdoor shooting, the kit lens is not good enough, because the zoom is too small.

  4 Please also recommend for all other occasions as an amateur photographer might need specific lenses and I couldn't have always figured out.

  5. the most important - to restrict myself maximally 2 additions only to my bag.

  6 - low budget the best. A great recommendation, for example. was the 50 mm 1.8. Works great and at extreme low prices.

  Main estimates between $ 150 to $ 300 for each lens.

  However, can increase budget if you feel any lens is essential and must be added to a bag of fans.

  7. I don't have any what particular prefence for canon and open to all watch brands

  Hope my request is clear and precise.

  Thanks in advance for the help

  Rgds

  Suman

  Large aperture lenses are expensive & in a zoom more expensive still, so I don't think there's a way to fit this budget before you buy a Tamron 28-75 f2.8 opportunity. For more watch the Canon 70-300 IS and the Tamron 70-300 VC, new or used.

• Can't access ESXi host after VLAN for MGMT has been implemented?

  Hello

  We run ESXi 5.1 and recently to get our network

  Network administrator has received only 5 VLAN for MGMT vSwitch.  Since then, we are not able to ping on the ESXi host, or access in vCenter.

  He received different VLAN for vMotion and vSwitch and VM.

  Just would like to ask your advice what changes I need to do?

  Hello

  That doesn't sound right. You have 3 different vSwitches with 2 ports on each, so you can not the team together on the side of the switch.

  This would have been right if you had a vDS with 6 uplinks and various exchanges by the feature that you do not.

  You have need of the network is to set up 3 different teams one by vSwitch and to start with that you have the management must be in the access mode so that you can retrieve with your ESX box connectivity.

  Also the vMotion didn't need to be mode trunk you'll only of vMotion. Data (VM) must be master.

• Why must id VLAN unique for each external network?

  Sometimes we have several public networks with the same VLAN, but in this case, we could not add them as external network to vCloud Director, he complains that the VLAN ID has been used, then assign a VLAN ID for each public network. Could someone explain to me why a unique id of VLAN is needed here?

  Thank you!

  If they are the same vLAN on the same Switch, they are actually exactly the same from the point of view of the vCloud Director.

  The alternative is to see if the superposition of external networks allows it works (Admin > General).