Small budget for lovers lenses

Dear friends

I have a 600 D with the 18-135 kit lens.

Recently I suggested a 50 mm 1.8 in this forum. Many thanks for the tip. Love this lens.

I want to develop my lens kit without rushing in big pass right now.

Asked to recommend 2 lens more that can be really useful for amateur photography.

I have noted the following

1. Although the 50 mm 1.8 is good, I struggle to us at events like weddings etc where closer physically is not always possible.

2. my 18-135 kit lens is good. But with zoom, opening cannot be wide open. Background become difficult with that.

3. for outdoor shooting, the kit lens is not good enough, because the zoom is too small.

4 Please also recommend for all other occasions as an amateur photographer might need specific lenses and I couldn't have always figured out.

5. the most important - to restrict myself maximally 2 additions only to my bag.

6 - low budget the best. A great recommendation, for example. was the 50 mm 1.8. Works great and at extreme low prices.

Main estimates between $ 150 to $ 300 for each lens.

However, can increase budget if you feel any lens is essential and must be added to a bag of fans.

7. I don't have any what particular prefence for canon and open to all watch brands

Hope my request is clear and precise.

Thanks in advance for the help

Rgds

Suman

Large aperture lenses are expensive & in a zoom more expensive still, so I don't think there's a way to fit this budget before you buy a Tamron 28-75 f2.8 opportunity. For more watch the Canon 70-300 IS and the Tamron 70-300 VC, new or used.

Tags: Canon Camera

Similar Questions

  • Need a fix of small budget for a HDMI port on my OPTIPLEX GX 620 2006 do not know what would be a good choice?

    I have a 2006 name Dell OPTIPLEX GX620 (Mini lathe) CPU Intel (r) Pentium (r) 4 CPU 3.00 GHz CPU - 1 base - 2 wire frequency 2992.32 MHz 1 thread (15 * 199,49 MHz) current multiplier: 15 / Min: 14 / Max: 15 Architecture Prescott / N0-Step (90nm) Cpuid / Ext.F.4.3 / F.4 AI Extensions MMX, SSE, SSE2, SSE3, EM64T covers L1D: 16 k / L2: 2048 KB Caches Assoc.L1D : 8 way / L2: 8-way of the firmware Rev 0 x 000005 Vcore Volts Type Retail 1.42 (Original frequency: 3000 MHz)

    Model card mother Dell 0HH807 Socket Socket 775 LGA North Bridge
    Rev of Intel i945P/PL/G/GZ A2 South Bridge Intel 82801 GB (ICH7/R) rev A1 BIOS Dell Inc. A11 (30/11/2006)

    (Vivid RAM) memory, Total size 1536 MB Type Dual Channel (128 bit) DDR2-SDRAM frequency
    266 MHz - report 3:4 Timings 4-4-4-11-15 (TCAS/ACAS-tRC-tRP-tRAS-tCS) Slot #1 Module Samsung 512 MB (DDR2-537) Slot #2 Module MOSEL 256 MB (DDR2-537) Slot #3 Module Samsung 512 MB (DDR2-537) Slot #4 Module MOSEL 256 MB (DDR2-537)
    GPU Type #1 Intel 82852/82855 M/GME graphics card
    GPU #1 brand VRAM 0 x 1028 (0x01AD) Type #1 224 MB of memory GPU Type #2 Intel (r) 82945 G Express Chipset Family #2 brand VRAM GPU 0 x 1028 Type #2 224 MB DirectX 9 .0c (0x01AD).

    Storage capacity (HARD/SSD drive) model #1 HDS728080PLA380 #1 80 GB. Microsoft Windows XP Edition family Windows cerent. Service Pack 3 (Build 2600.

    I recently installed a D-Link Gigabit Desktop PCI Adapter Model No. map: DGE-530 t in one of the slots at the back of the tower with the top slot white which allows me to use the Ethernet port for my unique WiFi ARRIS router. Which increased my download speed in Mbit/s from 28 to 34 to 48-55.

    I would like to connect my computer to my flat screen Sharp HDMI port. I want to use a HTPC using XBMC. I have a Digixstream 2.4 GHz/5.8 GHz Dual Band WiFi DLA for the flat screen. (1) suggestion is to buy a Mini ONE $ 50.00 Rii keyboard real i28. First Mini keyboard, Airmouse, Touchpad of the world, chat Audio all in a Multi - Media Remote Control and Touchpad keyboard Pocket functions for Android TV boxes. (2) I thought that if I install a new card with a HDMI port I could connect the two directly, not sure what would enter the tower and be compatible at this point. Any suggestions to improve this system for low cost would be greatly appreciated. Thank you Will...

    More info on: budget fix hdmi port 2006 optiplex 620 good fit

    The Asus EAH5450 Silent or EAH6450 is the recommended model.

    ASUS Silent HD6450.  Fits all models EXCEPT USFF because USFF has no slots.

    http://www.Newegg.com/product/product.aspx?item=N82E16814121439

    There are drivers for the GX620 and many other models that had the designed for XP Vista Capable Logo Vista.

    Video ASUS Silent Radeon 5450 is usable on all models EXCEPT the USFF GX620 that has no slots.

    cs_setInnerHtml ('video_0752a05c-a671-4016-b435-70eba216c625', ");

    For WIN7 WIN8 or WIN8.1 drivers audio 32 and 64 bit WHQL certified Versions.

    DirectX June 2010 is also highly recommended.

    Download DirectX Redist (June 2010) of official Microsoft ...

    Download the file, extract to a folder, RUN DXSETUP. EXE as administrator.

    The codec has Analog Devices AD198X catalog of Microsoft WHQL drivers.

    Architecture: X 86
    Classification: drivers
    Products supported: Windows 7, Windows 8
    Supported languages: all
    Company: Analog Devices
    Driver manufacturer: Analog Devices, Inc.
    Class driver: Sound
    Driver model: SoundMAX Integrated Digital Audio
    Driver provider: Analog Devices
    Version: 5.12.1.7010
    Version Date: 31/10/2006

    More information:

    Company: Analog Devices
    Driver manufacturer: Analog Devices, Inc.
    Class driver: Sound
    Driver model: SoundMAX Integrated Digital Audio
    Driver provider: Analog Devices
    Version: 5.12.2.7010
    Version Date: 19/10/2006

    Catalog of Microsoft Analog Devices 5.12.1.7010 32 BIT

    catalog.update.microsoft.com/.../ScopedViewRedirect.aspx

    Catalog of Microsoft Analog Devices 5.12.2.7010 64-BIT

    catalog.update.microsoft.com/.../ScopedViewRedirect.aspx

    PCI\VEN_8086 & dev_266e & subsys_01a11028
    PCI\VEN_8086 & dev_24d5 & subsys_01761028
    PCI\VEN_8086 & dev_27de & subsys_01bc1028
    PCI\VEN_8086 & dev_24d5 & subsys_01741028
    PCI\VEN_8086 & dev_24d5 & subsys_01681028
    PCI\VEN_8086 & dev_24d5 & subsys_01561028
    PCI\VEN_8086 & dev_266e & subsys_01791028
    PCI\VEN_8086 & dev_24d5 & subsys_03021028
    PCI\VEN_8086 & dev_24d5 & subsys_019d1028
    PCI\VEN_8086 & dev_27de & subsys_01ad1028
    PCI\VEN_8086 & dev_266e & subsys_01811028
    PCI\VEN_8086 & dev_24d5 & subsys_01621028
    PCI\VEN_8086 & dev_266e & subsys_01901028
    PCI\VEN_8086 & dev_266e & subsys_01991028
    PCI\VEN_8086 & dev_266e & subsys_01771028
    PCI\VEN_8086 & dev_24d5 & subsys_01691028
    PCI\VEN_8086 & dev_24d5 & subsys_01511028
    PCI\VEN_8086 & dev_24d5 & subsys_01d51028
    PCI\VEN_8086 & dev_24d5 & subsys_01571028
    PCI\VEN_8086 & dev_266e & subsys_017b1028
    PCI\VEN_8086 & dev_24d5 & subsys_017a1028
    PCI\VEN_8086 & dev_266e & subsys_01751028
    PCI\VEN_8086 & dev_266e & subsys_01781028
    PCI\VEN_8086 & dev_24d5 & subsys_01541028
    PCI\VEN_8086 & dev_24d5 & subsys_01551028

    ID update taken in charge

    03ae3b46-f06f-4f4f-b76a-4c960993b94c
    06362563-621C-4630-87AA-1213f176df1f
    0cf8bc26-892F-42FC-8757-a2dd83738b4a
    11c08435-a2d1-4463-b5b9-43376f56de76
    14b19087-24fb-4a67-BdeF-00045f0c5c8a
    1958c05a-2a61-4ACC-bed9-cfa612946126
    1e4ec816-D9F6-44B4-af7f-e3f12e395466
    1f85a63a-592b-4929-AB13-404a36f8eb4f
    285f6780-Afaf-4ad6-b9af-64c0ef376a4d
    33065cca-C120-430D-b764-5ece296e6a5e
    3d594402-0ce5-4E3F-8CB7-4d41fa14e17a
    4016e98b-38d6-45dc-aa96-e5c6c4b8afa5
    41fc584a-ba80-4eea-960a-f33ff764f2d7
    53899004-F959-4E14-9F10-8a0f0c0914ba
    542a4956-c6e3-4279-A19B-00c55045a949
    584ec490-D422-42c6-a71c-f1c9967953b7
    6864f06b-1677-41bb-BE75-1aba02a61dd0
    6c81fed7-57a9-4d9e-B239-2f8679b43cae
    723320af-da7b-4217-a0ac-b047612382a0
    7f98d187-ABC6-40CC-bb47-0d89c690c89f
    89886cd9-dbd2-49Cf-9d81-41dfd2e3c4e5
    bf0b1225-20cf-4be7-a0f6-d854183780f1
    c3eb318a-fe4f-4E0C-8ef9-56a56e2cac48
    c8cf0039-d33e-4bc4-991A-f9e1363d4660
    cf699d9c-8ea7-4b14-b5df-29ee34d023b0
     
  • The back button often responds with a drop down menu of the story rather than simply go back to the previous page. There used to be a small arrow for that, why did you do that?

    The back button often responds with a drop down menu of the story rather than simply go back to the previous page. There used to be a small arrow for that, why did you do that?

    When I left click on the back instead of the browser navigation back button, I go almost every time to get the list of previous browsing history or it will just doing nothing until I click on the new button. The history of combination of button "return" rather than a separate between the historical click of the buttons box is the problem. Combined with my arthritic fingers of aging that is. If I was as fast as I used to be I guess it wouldn't be a problem. I liked the separate history area. This action combination navigation / buttons story scenario is problematic. I'm fairly certain that if I find it quite disturbing to bring to your attention that there are others (old beards) in the same boat I am.

    Thanks for listening
    D

    Use one of the following methods to open the tab history list:

    • Right-click on the back or next button
    • Press and hold the left button of the mouse on the active back or forward button until the list opens

    You can watch this extension:

  • Problem with the latest adapters of goal for the F5 for B4 lenses - the B4S16PL and the LAFZP12PL.

    I just got the latest adapters of goal for the F5 for B4 lenses - the B4S16PL and the LAFZP12PL. I have them sitting correctly, but they will not allow my lenses backfocus. What is the problem here?

    Do you mean that you cannot physically use the backfocus on lenses, or you can not get the correct backfocus?

    The correct backfocus with these cards, if they like the others I used it, will be very different from that of the correct backfocus on a camera usually 2/3 "

  • No sound in the computer of windows xp "icon of the small speaker for adjustment of volume is gone.

    Original title: his help.
    My mom accidentally deleted something out of xp where the small speaker for the volume control icon has disappeared. So speaking I have no sound.

    any ideas on how to get my computer back to audio playback?
    I don't know if this will help, but my computer is a DELL optiplex gx620

    Hello

    See the link below to bring the volume or its icon in the Windows taskbar.

    Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

    http://support.Microsoft.com/kb/319095

    Also, check the link below to fix problem with no sound in Windows XP.

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • I have 4.4 LR that I just started using. There is no adjustment of calibration lens for my lenses Olympus (12-60 F2. 8 - 4 SWD, 50-200 F2.8 - 3.5 non - SWD, 50 F2.) and/or my e-620 of Olympus. I ran in circles, eventually give up and calling it "acid."

    have 4.4 LR that I just started using. There is no adjustment of calibration lens for my lenses Olympus (12-60 F2. 8 - 4 SWD, 50-200 F2.8 - 3.5 non - SWD, 50 F2.) and/or my e-620 of Olympus. I ran in circles, finally give in and call it "sour grapes." Should I LR 4 to recognize my goal? Is how much help?

    Hi edsmx,

    Please see the link below.

    Work with lenses profiles in Adobe Camera Raw, Photoshop and Lightroom

    Kind regards

    ~ Mohit

  • Lenses for Olympus lenses... correction presets?

    In the past I remember that in the correction of lens (to be developed) Panel, if I used an Olympus micro 4/3 lenses (e.g. M.ZUIKO Digital 17 mm f /1.8) No. listed in the drop-down menu Olympus lenses there, but a symbol appears saying that the goal was already a correction applied to the raw file (or words to that effect).

    I've just updated LR a week or two ago, and it seems not yet to say this in the Panel of the lens, he tells just something like "no correction of the lens could be found.

    Are built there are still in corrections for Olympus lenses... in the latest version of LR?
    Why they are 'hidden' corrections (if they are there at all)?

    Thank you

    Alan.

    For your camera that has built-in profiles, work of the message is different depending on whether corrections profile of lenses are enabled or not.

    Without activation to allow Corrections of profile, you will see a message that your device has built-in profiles which are applied automatically.  That's what you remember seeing before.

    With the activation to allow Corrections of profile, you see a message that it cannot find a profile, which is true since you ask LR to find an external profile, option for your goal, and it is not a.  This does not mean that integrated fixes are not applied, more, they are, it just means that there is that one place to have a message and LR can both say that the built-in corrections are applied and that it cannot find a non-built-in profile.

  • Possible to specify no lens correction for some lenses

    Hello.  It is possible to specify no lens correction for some lenses (such as fisheye) while using 'default' or 'auto' for the correction of the goal?  If there is no built-in feature to support this, it would be possible to change manually the profiles included for the specific lens to achieve the same effect?  In addition, the profiles included location?  Thank you.

    You can set the "default settings" for each objective separately.

    Lightroom 4

    1 Select an image taken with the lens, 2) go to "correction lenses and sele ctthe tab ' profile»(, 3) set"Distotion"both vignetting" to "0" and 4) click on the arrows next to "Setup" and select "Save new lens profile by default."

    Lightroom 3

    Same as above, but also the value "Aberration C." '0' If you want.

    For most of my lenses I 0 ' distortion' and 'Vignetting' 50 and change it only on images that seem to need it. That's just my preference, yours may differ. For my Canon 8-15mm I sometimes use distortion "control if I'm changing the 'fisheye look'. I generally use PS Adaptive Filter of wide angle and Fisheye-Hemi plugin for this purpose.

  • Good for the budget for sports and wildlife photography and lenses all day 450

    Hi everybody I would like to know of lenses that are good for the hand that held sports photography and wildlife.i normally take pictures of horse riding needs to be possible to make quick point I would also like it for everyday photography (budget of 450)
    Thank you (I own a canon 1100D)
    LJ

    Your budget is a bit low for a goal of large animals, but the Canon 70-200 F4 L could meet your other needs. It's a very good goal two IQ wise and AF spped is excellent. Another interesting research choice are the Tamron 70-300 VC or maybe the second version of the 18-270 VC. (I had the original version & it was a very good goal, but not a 'great' lens).

  • Small fonts for Firefox 35.0.1 display wrong after Windows Update 10/02/15

    After that Microsoft has made an update (attached picture) many small fonts display is bad (attached image). I see it in any other program, including IE. Not all fonts are bad, just a few small. Everything on your page here seems fine.

    Thank you

    Chris

    HitokiriBattousai said

    I uninstalled 3013455 and the problem disappeared, so if you want to get rid of it you can uninstall it or wait for microsoft to get out a fix for it

    Me too! I didn't know that Vista would let me do that!

    Thank you all.

    (1) run Windows Update in Control Panel
    (2) at the bottom left, click on to change the installed updates
    (3) find 3013455 and uninstall

  • create small mistresses for iDVD

    I have a 55-minute film that I just finished editing in FCP X.  I want to export the movie in .mov format, so I can put it in idvd (for some reason any iDVD will not work with MPEG4).  The only way I can see for this is file sharing, master file.  The question I have is that when I do that, it creates a master file 64G. Same with the smaller settings (H.264), is still a film of 9.5 G - which is too big to fit on a DVD disc.  I would like to use iMovie to do this, but iMovie has no chapter markers I need to translate the menu DVD - the reason why I had to create the film at the FCC.  My question is: how to export this movie into a .mov file that is smaller and fits on a DVD?

    (I love the DVD creation menu which offers to iDVD - this is why I do not use the creator of DVD in FCP menu)

    The size of the master file is not relevant. iDVD will compress the media in order to comply with the DVD specification. The only factor is the length of the media, and 55 minutes should not be a problem.

  • Is there a small adapter for R600?

    Such a nice little laptop, such a great power adapter... Anyone know if there is a small adapter available and where can I buy it?

    My R600 (US) came with the power PA3679U-1ACA card number. It is the smallest I've ever seen, for any computer, measuring about 3 "x 1.25" x 0.8 ". Incredibly tiny, but the label says that it generates 15VDC to 3A, which would be 45W.

  • What is the upper part of the mouse X 5000 small switch for?

    I just got a HP X 5000 wireless mouse and it has a small slide on the top behind the switch. What's this switch for it please?

    Hello

    There are a few guides/manuals on the following link, you can try it yourself.

    http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/manualsResults/?lang=en & CC = US & sp4ts. OID = 5164323

    Kind regards.

  • Error message receiver: 4.73 help system home Budget for Dummies running.

    Original title: 4.73 help system

    I like the others has the Budget home for Dummies and get the same result. So I followed the things you said and it still does not work.

    Sandie

    Hi Sandie,

    1. who is the manufacturer of Budget home for Dummies?

    2 have. what troubleshooting measures you tried to solve the problem?

    3. What is the graduating error message that you receive?

    4 Windows operating system you are using?

    You can contact the manufacturer of the product and check system specifications required to run the program.

    If you are using Windows 7, you can try to run the program in Windows Vista or XP compatibility mode and check if it helps:

    For more information, see the article:

    Make older programs in this version of Windows

  • What is the best lens kit for Canon lenses cleaning/formula?

    My lenses need cleaning bad! I use the Canon T3i and the 18-55 kit lens and 55-250, 50 F 1.8

    willfoxylove wrote:

    My lenses need cleaning bad! I use the Canon T3i and the 18-55 kit lens and 55-250, 50 F 1.8

    What kind of dirty? Hit by a splash of muddy water and you hunt elephants? Or a more down to Earth 'footprints on my front element' dirty? So late, you can use a little liquid and a wipe of lens for lens cleaning tissue. Blow gently in the dirt with a blower of squeeze and lightly sweep any 'chunks' tenacious with a fine brush for lenses, usually sold as a combination tool. Repeat as needed until you are lint or grease issues, then use the liquid and dry.

Maybe you are looking for