vMotion works does not after upgrading to 5.5 U2

Similar Questions

• Update of Pluging Manager works does not after upgrade

  I think I'm having the same problem as everyone else and I'm pulling my hair out trying to understand what is happening.  Let me first start of by saying that I am in no way a SQL DB, so I'm just Dodge my way through so far with no luck.  So far, that's what I did.  I was running ESX 3.5 U4 and vCenter 2.5 U4 with a server remote phyiscal SQL 2005 for VCDB & UMDB.  I upgraded to 4.0 vCenter and everything was fine.  Then I tried to update Update Manager.  He's been through, I managed to install the plugin Update Manager, but it is disabled and whenever I load the vSphere Client I get and error, "there was a connection to VMware vCenter Update Manager error - vcenterserver:8084.»  Unavailable temporarliy database or network problems.

  At the moment I have:

  VMware VirtualCenter Server Service set to automatic and log in under the same account AD as with the previous version.

  VMware Update Manager Service is set to automatic and log in as a Local System.  Update Manager service will not start if you use this account or any account AD.

  System DSN defined for the Update Manager and VirtualCenter with SQL Native Client driver.  Remote server entered correctly and I use Windows authentication integrated with the default correct database selected and everything else is default.  When I do a Test connection, I get a successful connection with the two system DSN.

  However, Manager of continuous update not working which VirtualCenter Server works fine and both of the DB is on the same remote server.  Just for fun, I tried to install SQL Express on the vCenter Server Server for the Update Manager and it worked.  However, I would use the same DB Update Manager that I used on the remote server.  I checked the log file, and that's what I'm after launching the vSphere client.

  Product = VMware Update Manager, Version 4.0.0 Build = 162871 =

  Managed implementation information configuration process

  Unable to get the module name to process 4. Error: 299. Ignoring the process

  Starting managed the java.exe process

  Starting managed process rdevServer.exe

  Monitoring process started

  Internal Manager of the tasks established demand...

  Handler created email alerts...

  Configuration manager created...

  Locking of entity manager created...

  vaCrypto initializing...

  Key responsible VALM C:\Program Files\VMware\Infrastructure\Update Manager\ssl\valm.key

  Health services manager created...

  Collector of statistics created task...

  Trace for all: false

  Record of integrity. BaselineComplianceStatusCollector: true

  Integrity.ComplianceStatusManager trace: true

  Record of integrity. DVSManager: true

  Record of integrity. ScheduledTaskManager: true

  Record of integrity. SessionManager: true

  Record of integrity. UpdateComplianceStatusCollector: true

  Record of integrity. UpdateManager.remediate: true

  Record of integrity. UpdateManager.scan: true

  Record of integrity. UpdateManager.stage: true

  Record of integrity. VcIntegrity.setConfig: true

  Record of integrity. VcIntegrity.setNewUpdateConfig: true

  Trace loaded objects.

  VcIntegrityPlugin Init

  Add reminder to Ufa Shutdown manager.

  ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.

  vim.fault.DatabaseError

  VcIntegrityPlugin Start

  ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.

  vim.fault.DatabaseError

  No. began

  Leave validate. Failed

  ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.

  vim.fault.DatabaseError

  No. began

  Leave validate. Failed

  I don't know what that means or how to fix.  Any help would be grateful.

  Hello

  As far as I understand, you are using integrated Windows authentication. Can you please try to use SQL Server authentication instead of Windows authentication? Update Manager does not support Windows authentication when the database is on a remote computer. The database and the DSN system must use SQL Server authentication.

  You can also take a look at the following thread: http://communities.vmware.com/thread/212853?tstart=0.

  Hope this helps,

  Margarita

• External monitor works does not after upgrade

  Hello friends.

  Computer and software (Production Premium CS5.5) have improved. I use an external bridge connected via Firewire. Premiere Pro sees the bridge but does not the image/video to it. I even managed to capture from the first bridge without problem. No matter what I tried first will not export to the NTSC monitor. He did it in Production Studio Premium. With the software, I had before she would export any SD NTSC image or video. I produce a weekly television show and my external NTSC monitor is a must for the color calibration. Any help would be greatly appreciated.

  CS5.5 Production Premium

  Two DVI monitors

  Quadro 2000 video card

  Windows 7 Professional - 64-bit

  I7 with 16 gigs ram

  

• Sqlplus works does not after upgrade

  Hello

  Yesterday, I updated the instant client on my box to take advantage of the OIC VPN connection vs. Everything works fine in SQL dev. This morning, I had to enter another (u.achieve) application that connects to the same database. There was an error. So I tried to check the connection, SQLPlus (in control box). For me this is one "the application could not start correctly (0xc000007b)." message. I had my old instantclient folder so I changed the names. Allowed to SQLPlus work. And if I change it back, it fails again.

  Anyone know why this happens or how to fix it? I'm on a 64-bit Win7 connecting to a 11.2.0.4.0 computer db.

  Thank you

  May be that the customer is not compatible

  Please download the appropriate client software

  Oracle Database 11 g Release 2 for Microsoft Windows (x 64)

  AppsmAsti

  sharing is supported

• Headset doesn't work does not after upgrade Windows 10

  I have a similar problem with Pavilion 500-249. No sound from headphones, well that helmet gets OK in Device Manager. Also, when headphone is plugged, speakers are not dumb.

  Says Windows troubleshooting headphones do not set as default, but 'apply this correction' fails.

  Support for Microsoft Windows 10 could not fix that by taking control of my computer for more than an hour and have referred the problem to Microsoft engineers. They had to call me today, but I'm still waiting, and 14:30 here.

  If they find a solution, I'll post it here.

  Greetings,

  You have a hybrid system. HP uses the Realtek drivers on a Beats IDT audio chipset. This was caused when Apple acquired Beats Audio. Some HP systems manufactured in the meantime have material ITD but Realtek drivers available for download at the site to download driver and PC software. New HP systems now have audio-Bang & Olufsen.

  Please see here for the specifications of your PC, including the IDT audio chipset. But the download link for the driver for your PC (below) shows Realtek audio driver?

  I have a system with similar characteristics and have no intention to go to win 10 on this PC.

  The usual next step is to uninstall the Microsoft supplied driver and try to install the HP Win 8.1 or, if necessary, to win 10 driver for your PC. Here is the audio driver Realtek 10 Win. HP has win 10 drivers for your PC. You may need to modify the operating system and the version to see the Win 10 drivers available for download.

  Hemdani

• AutoComplete doesn't work does not after installing IE *.

  AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
  ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
  for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

  sjakulski,
  Thank you for visiting the Microsoft Answers community forum.

  In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

  This should solve your problem.  Let us know if you need more information.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Network adapter (device Bluetooth (Personal Area Network) and Btooth works does not after installing W 7 Ultimate__ (Situation Reported to microsoft Hel and Support under SRX1120597135ID Without solution untill today))

  BTooth works do not after Windows Vista upgrade (Btooth works without problems) for W7
  At the moment I have problems connection BlackBerry device and other devices via Btooth
  messages 1: 'softwarfe device driver was not successfully installed ".
  message 2: "WIDDCOMM Bluetooth Software 6.1.04403 Dell Incompatible" (WIDCOMM = Broadband - manufacturer)
  In short, the list obtained messages:
  1 device driver software was not compatible
  2. incompatible software Bluetooth
  3. the drivers are not installed: lists of codes (31) (28) (10)

  Report of the final situation for Microsoft Help and Support under SRX1120597135ID (withoutany positive response so far, I have been asked to report through this forum, I hope a solution will be here)
  I tried all the options you will find in google without success.

  I contacted Dell and Bradband and I have upgraded to WIDCOMM Bluetooth Software 6.2.0.6600 available in Dell Support without positive results.

  Repost: Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• For hp dv7 fingerprint reader works does not after update to 8.1 windows

  Hello

  I upgraded Windows 8.1 Windows 8.  Before updating the finger print reader worked. I used it to connect to websites in any browser Firefox. I also logged into windows with my fingerprint reader and the screen unlocked the same way.

  I have updated all the drivers according to the instructions on updatig before windows 8.1 and after update.  I checked that everything compatible with windows 8.1 again by the instructions before putting up-to-date.

  After that update the drive light will not read the finger scan and the light does not illuminate. I went to the control panel to check the driver and he was later. I ran the windows driver verifier and on the HP site checked for validity sensor driver is up-to-date.  When I open simple passage it says congratulations you can connect in the window by the touch of the finger. When I go on Internet sites I have red cells connected with simle pass, he now seeks to connect with the password "master."

  Any help would be appreciated!

  Thank you

  BattleAngelita,

  Welcome to the HP Forum.

  Does the SimplePass asks your for your master password Windows means that the program has survived the process of upgrading to Windows 8, 1 - somehow.

  You can start with the following:

  • Create a Restore Point > create a restore - Win7 Point ORcreate a restore point Win8 
  • Close all your programs and shut down your computer
    • Unplug everything (little unifying for the keyboard / mouse external can stay)
    • Perform the Hard Reset for your laptop
    • Start the computer and connect
  • Check is SimplePass himself has sorted them.

  ==========================================================================

  You can try to update your SimplePass program to the latest version in the series of version 6.x.

  Before you do this, read and follow the instructions to export your Webcards in your .tsd file.  Regardless of whether the Web site connections are working right now; you need this backup in case you lose your HP SimplePass program (thanks to the complete removal / reinstallation or if corruption).

  Then, consider updating the HP SimplePass program to the latest version 6 series.  If you are already using the latest version, consider other options in the guide, including the "Repair SimplePass" procedure.

  Open the file > click Download > click 'open in Adobe Reader.

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Webcam works does not after update

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  You can always reinstall drivers even if they are native in Windows. Go to control panel and open the Device Manager. Look down the list of all references to your webcam (video, microphone, etc.). They may appear with a yellow! mark indicating there is a problem with the driver, or they might not. If none does everyone try to enable 'Show hidden devices' in the view menu. For each entry in webcam that you find, right-click on it, select properties then driver. Click on the button that says "roll back driver". The earlier work driver should then re - install.

  If the Roll Back driver option is disabled which means there is no new driver installed. You can always reinstall the driver however. Right-click on each entry in webcam and select uninstall driver. When it is unplug your webcam. Reset is optional, if not plug your webcam into even once (in a port on the computer NOT to a hub) and Windows should re - detect and install the drivers again.

  In case it was an update of the driver who caused your problem when you rolled back each of the webcam drivers and tested the camera working again, go to Windows Update and look for the updates. The problem with the driver should appear again. From the screen to view updates (the one with the details on upgrades), right-click on the update of the webcam driver and select "hide update". After that it shouldn't bother you again.

• Touchpad HP Pavilion 17 works does not after using an external wireless mouse

  I have the HP Pavilion 17 laptop.  It is running Windows 8.1.  Everything worked fine until I used an external wireless mouse.  After unplugging the mouse the touchpad does not itself again.  I have therefore no pointer and no touchpad to use unless I have keep the external mouse not connected.  I tried the hard reset with the plug of the battery, unplugging, pressing the power button for 15 seconds and turning everything back on.  Still no work touchpad.  Had this happen last week and called HP because I only had the laptop for 3 days at this time here.  They had me do a system restore to an earlier point.  At this point, everything worked again and I toilet problem has been resolved.  This is why I used the external mouse always thinking that it wouldn't be a problem.  I was wrong.

  Also, I've seen other posts on a different notebook that has a toggle power button in the upper left corner of the touchpad to activate/disengage, but this was not one of these.

  Any help would be greatly appreciated.  My next step is to call HP again tomorrow and see if someone else has another solution.  I would obviously like the ability to use the touch pad or external mouse at any time without having to restart and go through all these other problems.  Otherwise, this phone pretty may be going back to the store this weekend.  :-)

  Thank you!!

  This fixed the problem! Thank you very much!! Seriously, 3 different phone calls to HP and not one of them ever talked about this easy solution!

• VerizonWireless app works is not after upgrade to 4g

  Someone had questions using verizonwireless app after upgrade to 4 g? Also, when I log into the my account via the browser we it says my sim card is in a device not supported. Any ideas?

  try to uninstall one to get the latest market. I had this problem and it worked for me. Make sure that you are not in airplane mode because it will not read the radio if its in ap mode.

• sounds works does not after installing SP2

  Help, after that I installed SP2 in my laptop Windows Vista, my sound has stopped working. I checked my sound system and update of my audio devices, but they are all perfectly fine. I cheked articles related to SP2 problems online, but they were not useful. I can't even uninstall SP2 because it does not! Also, I even tried unistalling all the updates I've installed SP2 and restarted my laptop for 5 hours, but nothing has WORKED. Help, please.

  Go to your laptop manufacturers website and download the drivers on their part.   Next time find a VISTA forum and not the Windows Home Server Ant.

  --

• Softex Omnipass software of fingerprint recognition works does not after installing Internet Explorer 9.

  Original title: recognition of fingerprints and IE9.

  I recently "upgraded" to IE9 and now my Softex Omnipass of fingerprint recognition software does not work.

  Hello

  Internet Explorer 9 is a BETA product and therefore may not work with all your software perceive.
  I recommend to uninstall IE9, and then check to see if you Softex Omnipass program works.

  If this isn't the case, uninstall the Softex and then reinstall.

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Fullsceen Slideshow works does not after update (2015.2)

  Hi-

  Since the upgrade to the latest version, I note that the slideshow widget full screen does not work. He works within the Muse app (although that it crashed Muse sometimes when using), and although it will display with the built-in preview of Muse, as soon as you try to make an overview of the slideshow browser does not at all, it's all white.

  To make sure that it wasn't a problem in conflict elsewhere on my site, I tried to create a new site of the Muse and the only thing that I add to the page is a slideshow full screen and leave all the default settings (photo galleries and everything) and still nothing loads at all except for the next/previous/counter options.

  Hi BLSMagazine,

  As I suggested above, have you tried to view your site on another browser?

  Kind regards

  Ankush

• Treo 700W blue tooth w/daimler Chrysler uconnect works does not after installing the update.

  Anyone having problems with his tooth of 700W overalls after installing the update? My Jeep Grand Cherokee blue tooth uconnect system worked perfectly until I installed the update. Now, it will not work. I have went through all the procedures on several occasions. The phone will discover the uconnect, but when you put the 4-digit access code that you assigned to the vehicle, it does not connect thought the secure connection. I called Verizon and Daimler Chrysler and the two do not know why this won't work. I have reset the system, uconnect on the vehicle by their instructions. Any help would be greatly appreciated.

  Message is about: Treo 700w (Verizon)

  A hard reset of the Treo has solved the problem, but you will lose all your data and applications.

  Message is about: Treo 700wx (Verizon)