VMware Fusion task using several cycles of CPU as vmware-vmx

Similar Questions

• Using several data stores, cannot migrate the vmx file in a data store

  I am host migration between 3.5 and 4.0, and part of the migration requires me to vmotion data to a single shared LUN data warehouses.  From there on, I import the virtual machine in 4.0 and using the script to migrate the two VM disks at different stores of data below.  The problem I have is that the configuration (vmx) file not migrated and is left on the shared storage LUNS.  Anyone knows how to go beyond this?

  The Script:

  $VMDisk = 'disk 1 '.

  $VMName = 'TestVM '.

  $TargetDS = get-Datastore - VMHost (Get-VMHost-$S.id Id) | Where-Object {$_.} Name - like "PMV"} | "" FreeSpaceMB tri-objet-descending | SELECT name - first of all 1

  $vm = get-View - ViewType VirtualMachine-filter @{"Name" = $VMName}

  foreach ($dev in $vm. Config.Hardware.Device) {if ($dev. DeviceInfo.Label - eq $vmDisk) {$diskId = $dev. Key}}

  $spec = new-Object VMware.Vim.VirtualMachineRelocateSpec

  $diskspec = new-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator

  $diskspec. Data store = (Get-Datastore-name $TargetDS.Name |) Get - View). MoRef

  $diskspec.diskId = $diskId

  $spec. Disk = @($diskspec)

  $task = get-View ($vm. RelocateVM_Task ($spec, "lowpriority"))

  OK, I think I understand your problem now.

  I fear that in the current construction of PowerCLI, the Move-VM cmdlet does not destinations of individual data for each virtual hard disk store.

  With the RelocateVM_Task method, it is possible.

  The following script moves a guest at 3 different data warehouses:

  -the. VMX file for DS2

  -hard disk 1 for DS3

  -hard drive 2 TB DS4

  $vmName = "MyGuest"
  $vmxDS = "DS2"
  $osDS = "DS3"
  $dataDS = "DS4"
  
  $vm = Get-VM -Name $vmName
  
  $vm.Extensiondata.Config.Hardware.Device | %{
       if ($_.DeviceInfo.Label -eq "Hard disk 1"){
            $osDiskId = $_.Key
       }
       elseif($_.DeviceInfo.Label -eq "Hard disk 2"){
            $dataDiskId = $_.Key
       }
  }
  
  $spec = New-Object VMware.Vim.VirtualMachineRelocateSpec
  
  $osRelocate = New-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator
  $osRelocate.Datastore = (Get-Datastore -Name $osDS).Extensiondata.MoRef
  $osRelocate.diskId = $osDiskId
  
  $dataRelocate = New-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator
  $dataRelocate.Datastore = (Get-Datastore -Name $dataDS).Extensiondata.MoRef
  $dataRelocate.diskId = $dataDiskId
  
  $spec.Disk = @($osRelocate,$dataRelocate)
  $spec.Datastore = (Get-Datastore -Name $vmxDS).Extensiondata.MoRef
  $spec.Host = $vm.Extensiondata.Summary.Runtime.Host
  
  $task = Get-View ($vm.Extensiondata.RelocateVM_Task($spec, "lowpriority"))
  while("running","queued" -contains $task.Info.State){
       $task.UpdateViewData("Info")
       sleep 5
  }
  

  BTW, you can use the cmdlet Set - hard disk to a virtual disk that is specific to a data store.

  But as I understood what is not possible in your environment.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Firefox, or the Profile Manager will start. In my task manager, the process uses 50% of my cpu but does nothing. I like browsing with firefox, how do I fix?

  I tried to restart my computer, the I tried to uninstall and reinstall uninstall, delete all files of firefox and folders, then reboot and then reinstall. Also, I tried to open the Profile Manager to edit my profile. After you have reinstalled several times and try to open the Profile Manager before launching firef0x, I got the firefox crashed window and the process in the Task Manager always uses 50% of my cpu. The most recent strike and then re - download gives me an error "the file is corrupt" and will not even install the program.

  Kill the process that you see, including any plugincontainer.exe, only once firefox has stopped running don't try to update.

  Completely unexpected instances of firefox running can sometimes be the result of malware activity.

• use several fixes for live

  Hello;

  Sorry if this is a stupid question, but we'll have our first live concert in 2 weeks and I need some information.

  an instrumental songs is running in the background (desktop dj) and we want to add some live and vocal instruments using the main stage 3.

  I figured out, how to import logic channel strip parameters x 3 MainStage (audio and midi); but we want to use more than one midi instrument or an audio patch at a time.

  How does it work?

  Choose an audio and midi patch at the same time?

  E. g.. : us about two people, the instrumental is running in the background and each of us plays a midi instrument and the other is sings the song with the main stage.

  as well; Yes; Sorry; but our show is so close...

  TX so

  Not sure I exactly understand your question, but I would get a terminology directly, Apple screwed up:

  in Mainstage:

  "Channel Strip" = Patch (in the traditional definition, one only sound or instrument)

  'Patch' = Set/Setup/Mix/Performance (a group of hotfixes)

  So a MainStage 'Patch' can contain any number of bands of different channels (traditional: patches). It's for you to decide how you want to trigger their unique. The most common is affecting parts of the different keyboard, or you could use several keyboards and have them routed to the sounds as a result.

  Here's how to set up my workflow: for every song I play live, I use a "patch" by song, with patches named for their song, sorted alphabetically in the list of patches. I use anywhere from 1 to 10 + bands of channels by 'patch', which are divided between several keyboards and keyboard parts. Using this workflow, I can't spend the mid-song patches and can keep my patches much more organized.

  So my list of "patches" looks like:

  "Don ' t Stop believing"-contains bass synth & piano split and a wire saw for keyboard #2

  "Rich Girl" - Wurli #1, strings on keyboard #2 keyboard

  "Superstition" - Clavinet in the left hand, Horn in the right section

  etc. (on about 140 songs)

  Not everyone there only this way, many people use a "patch" for a more individual sound, or perhaps a sequence of keyboard split. So you CAN set them up like that and just get mid-song if you need to:

  "Piano".

  "Piano/synth thread.

  "With organ.

  "Rhodes/Strings.

  etc.

  Everyone has their different way to organize their work performance. MainStage is a VERY deep customizable program that allows different ways to implement. I should also mention "Alias Channel Strips', which are incredibly useful. Every channel strip takes a certain amount of CPU and RAM, and it would be very easy to overload your computer with only a dozen a few patches of dozens. But as many times you want to use the same sound over and over again in different configurations: Piano split with pads, piano split with organ, piano split with lead (etc). Instead of making copies of the channel strip, you can copy it, and then choose 'Paste as alias', who will make a copy that is not unique, but it is inspired by all the technical features of the original and does use more CPU or RAM so if you have a. It's exactly like aliases files on a Mac, they aren't really a copy of the file, but a pointer.

  I hope that helps! But do a little research and reflection, I'm sure you'll come up with a good workflow to organize your live material!

• Flash uses a lot of CPU

  I don't know when this started, but recently whenever I visit Web sites that use some or a lot of Flash, Firefox slows down completely. When I went in my task manager, I saw that FlashPlayerPlugin.exe was using a lot of CPU (109, 396 k to be exact). Actually, there are two open process. In the past I've never seen these before in Task Manager, but now it is a problem. Any ideas?

  Nevermind, I found a solution. It seems that there is a new feature implemented by Flash called Protected Mode. To disable it, you must go to C:\WINDOWS\Macromed\Flash then open a text called mms.cfg file and add the following text: ProtectedMode = 0. To disable.

• Re: Qosmio G50-10 t: How can I use the Quad - Core CPU Toshiba HD?

  Hello.

  And how you can use several Toshiba Quad Core HD processor with four RISC SIMD 128-bit processors in the Qosmio G50-10 t except that: enables support for H.264 encoders / HD / MPEG2 decoders, with functions for convert, transcode, navigate using the face (Face Navigation) detection and control actions. INJURY is not used!

  Maybe someone knows some software sales in which it could be used.

  Hello

  This Quad Core CPU is an additional processor that is not always in use.
  It was designed in the order using the main processor in some of the media process.
  For example, the Quad Core CPU works during the encoding or decoding of certain video standards. If you want to change it the standard of the video, the Quad Core CPU helps you complete this quick procedure.

  In addition, it improves the quality of the video (not HD). So, theoretically, you can view the videos in HD quality.
  Of course, you won't get the same quality as a film that has been recorded in full HD, but the Quad Core helps you improve the 576i pictures.

• Skype starts randomly using 20% of my CPU

  Every once in awhile (randomly), Skype will start and begin to use 20% of my CPU until I put my computer on energy saving. Specifically, I completely shut down Skype because he always seems to do that in the worst of times (like when I'm in a room with other people and my laptop fans suddenly start to look like a Jet engine). If I try to put an end to the task, she just starts back up again. I noticied it also uses some disk use, but not much.

  Next time, in this case I'll try to take a screenshot and to post it here. Anyone has an idea why Skype doing this?

  Skypehost.ext is not Skype, it's Windows Messenger 10 iApp. You can uninstall this app of apps in settings.

  20% of CPU overheating not your computer load, this can be caused by dust or other obstruction of the air flow. Also, make sure that you have installed windows 10 drivers, including drivers of management chipset manufacturers.

• the Task Manager displays only the CPU resource monitor

  Using Ctrl-Alt-Del to bring up the Task Manager appears a little CPU resource monitor.

  .

  Can I fix without reinstalling Windows? Or should I just wait for Windows 8?

  Hello. Try to double-click the gray area (frame) in the resource monitor. Who could return to the version complete.

• Windows Explorer using 50% of my CPU, causing all on my computer to take much longer. Help

  I use Windows Vista and recently the machine has been very strong, so I watched my task mamager and he said I was using 50% of my CPU, meanwhile, I had no programs running. I checked the process tab, and he said all the 50% was used by Windows Explorer. Is this right, if its wrong how can I solve this problem?

  Try a clean boot, or boot into safe mode.  The behavior persists?

  Consider using Sysinternals Autoruns or ShellExView. Disable Add-ons and non Microsoft shell extensions and verify the behavior.  If he went, reactivate the disabled extensions/add-ons, one at a time and see if you can identify who may be liable.

• Created a form of the ADF since a human task - how to get other human tasks use the same form ADF?

  We are new on the forms of the ADF and we have a simple workflow with a few different human tasks.

  The task of the initiator, I right click it and automatically generated a form of the ADF.

  The rest of the human tasks have the same payload, and I want just the other human tasks use the same ADF form I've already created. How can I do this?

  Thank you.

  Yes, there is a way to reuse the shape of the ADF and its workflow for several human tasks as long as the payload is the same.  To do this:

  1. Open the file "hwtaskflow.xml" inside your project of the ADF.  It will be difficult to read when you first open it so right mouse click the xml file-> select "reformat".
  2. Copy the 6 lines with the element with the form that you want to reuse-> pick up the 6 lines in the file under the rows that you copied.  The and elements in the text that was copied just need to be changed from the old human task name (for example, ".../MyHumanTaskOriginal") on behalf of the human recycled news of the task (for example, ".../MyHumanTaskReused").  Don't forget to leave the text in the and items of value to their original name.
  3. Redeploy the project.

  Dan

• Fusion of data - several images to compensate for the resulting page and registers

  I designed a form of writing simple exhibition of 3 fields, a logo (png), and a title area. This unique, simple, layer grouped when merged with data using several cliché product registration 54 pages of 8 cards per page: exactly as expected. However, the group resulting from cards on each page is offset. If 8 are grouped together and then the Group centered vertically and horizontally on each page this product the last printable pages.

  I read that number of entries forum as appear relevant, have tried the Master object, played with spacing and margins but always result with 8 cards from shift of centering. I have also searched/view Lynda.com, YouTube and other references. I obviously do not see where this offset numbers tie in with other parameters of the page. All the parameters of the page are borderless, bleeding etc.

  Where I wrong or what is the problem? I guess I could (with learn how do) create a macro to the group the cards on each page and then Center of each, but surely, this is not the result you expect from InDesign.

  Machine: Windows 7, running CS6 8.0.1

  Thanks for any help or pointers anyone can offer.

  Preview can be buggy, and I think it can "infect" your model, so I'm going to suggest you make a new template file, and then copy and paste your placeholders in it. Put them in the upper left corner.

  If possible, make the group placeholder smaller than necessary to fill the page when duplicated 8 times without space between and set the top and left margins to position it correctly. In the merge options add necessary spacing, leaving the upper part and fix the left margins, but set the down and right on 0 (data fusion can be weird about editing when the margins are quite right, too).

  Finally take a leap of faith and merger without preview.

• Slow Server 2008 performance when you use more than 1 CPU - bug?

  Hello

  It seems that when I run Server 2008 on one of my boxes 3 10.5.7 if I use more than 1 CPU in the settings, the ankles of machine the CPU while booting and then during the use of the operating system.  Normally, I have to run all 3 of them at the same time... and if I get all 3 virtual machines running, the CPU remains just pegged and slows down the machine.

  Then, if I close everything and change the settings to 1 CPU, virtual machines work fine, the CPU barely sees any activity and 75% of the 8 GB is used and it can run for weeks at a time without any problem.

  My 3 VMs

  1 Server 2008 x 64 w/Exchange 2007 2 GB, 1CPU

  2 Server 2008 x 86 File Server/Anti-anti-virus/utilities/Quickbooks, etc. 1 GB, 1CPU

  3 Server 2008 x 86 Active 1 GB, 1CPU Directory

  My Mac run all 10.5.7

  1 Macbook Pro 2007 2.33 Core 2 Duo

  1 mac Pro desktop 2008

  Rig EFIX running 10.5.7

  1 EFIX EP45-DS3R Q9550

  all the boxes are running 10.5.7 with the EFIX running 10.5.7 platform server and I can recreate in one of the 3 machines, 10.5 server or workstation, etc.

  Yes, I have the tools are installed and uses the latest patches, software, etc.

  Thanks for any help...

  VCPU more inside a virtual machine using could be a big problem, if you don't have much physical basis.

  If you set vCPU # = # pCore, then you will have several performance issue, cause you VM hangs (during its run) ALL of your hearts.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Configuration of 10g to use more than 1 CPU

  Hello experts,
  
  I have server Oracle 10.2.0.4 Enterprise Edition running on a Windows Server 2003 - Enterprise 64-bit.
  
  * The server has 4 Xeon processors *.
  
  We have a performance tool that we alert to an enrichment of the CPU.
  
  It seems that Oracle uses only a SINGLE processor.
  
  Is this normal in a 4-processor server?
  
  Can I make a configuration change to allow Oracle to use more than 1 CPU a CPU?
  
  Thank you very much. John

  You have several active sessions simultaneously (i.e. normal operation OLTP) relatively fast SQL statements running? Or if you use with a handful of active sessions that each runs relatively long SQL statements (i.e. normal DSS / operations data warehouse)?

  Unless you explicitly prevented Oracle to use several processors, it will use Fortunately each processor on the server. But if you have only one session active at a time and that the session is not running of the parallel operations, you would only end up using one of the available processors.

  Justin

• How can I remove the page options for my home pages when I use several home pages?

  I used several pages to my homepage with FireFox for a long time. I've recently updated my homepage as always - "use current pages" - now the firefox open the options page and which ones I want. It is not listed in the list of pages to open as home pages, but it nevertheless opens. I can't get rid of it because I have to open the options page to set the home pages.

  When you used the "use current pages" he adds all the tabs in the window that you were. Just remove the subject: preferences list in the box.

• Can I use several adapters to convert a Firewire 400 in Thunderbolt connection?

  I have a firewire 400 device I want to connect to a Thunderbolt connection.  Can I use several converters for first shot of firewire 400 and 800, and then use the Apple firewire 800 adapter Thunderbolt?  Otherwise, any other suggestions?

  Perhaps, but not all cards can work in tandem. But why waste time and money. A FW 400 device won't run any faster on Thunderbolt. Why do you need to do this, and do you have looked for a better solution?