VMWare Server 2 does not automatically start on the Linux host

Similar Questions

• Creative cloud does not automatically start more

  My creative cloud application does not automatically start more. It worked fine for a year and a half.
  But although the box in preferences to start automatically is checked that it does not automatically start more.
  It does not appear in the system tray I must maualy double click the CC (which i put my office op) to start.

  I also had a solution ad put a CC shortcut in the windows startup plan but he strangely disappears each time.

  After I dubble click on the strats of application up normally and everything works fine, so no problems with programs or the application of cc
  It was simply not possible box Autostart to highest upward. I use windows 8.1

  Unfortunately this did not help either. What I did then, I unchecked the box run at startup and put a shortcut in the Windows startup folder. Since then, (3 days ago), he continues to work. Hope it stays like that.

• Windows Server 2008, the server process could not be started because the configured identity is incorrect. Check the user name and password.

  When I started and connect to the windows 2008 Server and when trying to open any folder I get the below error message:

  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  Please give me your entries for this problem.

  Kind regards

  Shankar Kale
  

  Hi Shankar,

  The question you posted would be better suited in the TechNet Forums. See the link.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Hope this information helps.

• Server process could not be started because the configured identity is incorrect (massive failure Windows 7)

  I had worked in Vista x 64 for more than a year and upgraded to Windows 7 x 64 Ultimate a week ago. IT has worked so far and things suddenly got completely screwed up without obvious reason. I'm into the following loop, where I can't go out:

  1. after booting, two minutes is spent with the message "waiting for Group Policy Client" (normal startup takes less than a minute).

  2. once I enter the password, it passes to another two minutes with "Please wait for the user profile Service...". "(normally, the connection is instant)

  3. I'm connected (I am administrator), but a lot of things is false:

  -Without Aero. Single base type GUI Windows 2000 gray

  -Lack of network

  -A bubble message appears in the status bar:
  Unable to connect to a windows service
  Windows could not connect to the service user profile Service.
  This problem prevents standard users to log on the system...

  -Almost nothing works. Attempts to start to explore causes this error message:
  SOLUTION EXPLORER. EXE
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start the Panel of results in the following dialog box:
  Window title: {26ee0668-a00a-44d7-9371-beb064c98683}
  Message:
  {26ee0668-a00a-44d7-9371-beb064c98683}
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start most of the results of Windows programs in the variation of the above two messages

  -Event log is not functional. I am able to start-> Run-> Services and don't start all services of the event log, but it always says "The event log Service is unavailable".

  4. the things I have already tried and that has NOT worked:

  -System Restore to a point a few days ago when everything worked did not help
  -When you log on under different user accounts (administrator or not administrator), I have the same symptoms.
  -Try to re - install Windows 7 from the DVD fails - it says "source is no longer available...". "or something like that

  That did not help.

  In safe mode, the same problem occurred - cannot do anything and get the same error - "...". configured identity is incorrect... ».
  There is no missing or damaged file.

  in any case, thanks for responding.

  I was hoping that Windows 7 would solve the problems of stability of Vista, but I was wrong - things are even worse.
  It was the last straw - I decided to empty Windows and had Ubuntu Linux.

• My usb ports and cd/dvd drive will be does not automatically start when everything is connected on the

  My usb ports and cd/dvd player will not automatically start when something is plugged on them have to start manually.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Follow method 2 in the link below and check if AutoPlay is enabled, a link: AutoRun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive: http://support.microsoft.com/kb/330135

  I suggest to fix the AutoPlay parameter by downloading the file below and check the results: AutoPlay Repair Wizard: http://www.microsoft.com/downloads/en/details.aspx?familyid=C680A7B6-E8FA-45C4-A171-1B389CFACDAD&displaylang=en

• LL780 - Media does not automatically starting from tray 2

  I have a L7780 using Vista, XP and MAC OS. When Tray 1 is empty, the printer does not automatically draw/pull out tray 2. I get a condition "on paper." I have reset the printer to set up factory and have re-installed the latest drivers from the computer. This feature is published on page 40 of the operating manual. According to HP, this feature does not exist, however, I find that hard to believe since the manual stipulates that to this and I think at one time my printer did move to tray 2 when Tray 1 is empty. I use the LL780 in a network environment with multiple computers. The driver and the latest firmware is installed. I find the following link that deals with a "condition of paper output. I tried all the suggestions and it still does not work. I use plain white paper for all trays.

  http://support.HP.com/us-en/document/c00786157

  My first quesiton is, if somebody has got the LL7780 to automatically select tray 2 when Tray 1 is empty?

  Second, if so, it only worked when Tray 1 is empty at first or did the printer run out all the paper on tray 1 and then automatically move to tray 2.

  Thank you!

  HP released an update of firmware for this particular issue.

  Click here

• Bluetooth does not automatically start after start

  Hello

  I have a SONY VAIO with built in Toshiba Bluetooth. My bluetooth in the taskbar icon no longer appears when Windows starts. That's happened? I always start the Bluetooth manually in Control Panel... Help, please. How can I activate Bluetooth on starting again? Thank you very much.

  I don't know how it works on Sony laptop computers, but on my Toshiba BT application automatically starts when the BT module is enabled. In any case, try to define as suggested by the creation of shortcuts.

• LR6 will not automatically start when the memory card is inserted

  Hello

  Recently upgraded to LR6 from LR 5.7.1. When LR 5.7.1 was installed, it would automatically start when the memory card is inserted. With only LR6 installed it does not open when the memory card has been inserted.

  I "see the import dialog when a memory card is detected."

  I have LR installed 6.0.1.

  When the memory card is inserted, you receive the following error message:

  

  If I right click on the disk memory and select Auto Open play, a list of programs appear particularly LR. The program is highlighted is

  

  If I click on LR in the list above, I encounter error "Application not found".

  When I manually start LR6, it works and I can manually import from memory card.

  What can I do to fix this?

  Thank you

  Stu

  Yes, Autoplay is still trying to run LR5.

  There is a previous thread with notes on how to edit the Windows registry to resolve this problem, if you are comfortable doing.

• OSWatcher BB does not automatically start after reboot on a linux machine

  Hello
  I configured the OSW on my 2 node RAC on linux.
  When I start to startOSWbb.sh as the user oracle, it works ok.
  I installed the osw-service - 0.0.6 - 1.noarch.rpm rpm to add it to the service of linux, and indeed, he created the etc/init.d/osw.
  but after restarting the service of the OSW does not work. I see that everything has begun and has created a new folder to archive, a new vmstat.header, new vtop.tmp/tmp. but that's all.
  It is not running and it do right files in archive folder / file.
  also ps - ef | grep-i osw returns nothing
  where can I find its newspapers (saw nothing to NS)
  
  Thank you
  Yaron
  
  
  
  install oswatcher for RAC
  ============================
  
  mkdir/users/oracle/osw Pei
  CD/users/oracle/osw /.
  mkdir lxodsdb1tst
  mkdir lxodsdb2tst
  CP oswbb511_512.tar/users/oracle/osw/lxodsdb1tst
  tar - xvf oswbb511_512.tar
  CD oswbb
  
  lxodsdb1tst {oracle} / users/oracle/osw/lxodsdb1tst/oswbb > ls
  analysis gif lock OSWatcherFM.sh oswib.sh oswsub.sh tarupfiles.sh vmstat.header xtop.sh src
  docs headers mpsub.sh OSWatcher.sh oswnet.sh profile startOSWbb.sh tmp vmsub.sh
  Exampleprivate.NET iosub.sh nfssub.sh oswbba.jar oswrds.sh pssub.sh stopOSWbb.sh topaix.sh vtop.sh
  
  
  CP Exampleprivate.net private.net
  chmod 775 private.net
  VI private.net
  
  ######################################################################
  # This file contains examples of how to monitor private networks. TO
  # monitor your private networks create an executable file in the same
  # directory named private.net. Use the example for your host below operating system.
  # Make sure that you do not delete the last line in this file. Your file
  # private.net MUST contain the line rm lock.file.
  ######################################################################
  #Linux example
  ######################################################################
  echo "zzz * '' date'.
  Traceroute - r f lxodsdb2tst-priv
  Traceroute - r f lxodsdb1tst-priv
  ######################################################################
  # DO NOT DELETE THE NEXT LINE!
  #
  ######################################################################
  Locks/lock.file RM
  
  
  ./startOSWbb.sh
  
  
  lxodsdb1tst {oracle} / users/oracle/osw/lxodsdb1tst/oswbb >./startOSWbb.sh
  lxodsdb1tst {oracle} / users/oracle/osw/lxodsdb1tst/oswbb >
  Info... You don't have a value for snapshotInterval.
  Info... Using the default value = 30
  Info... You don't have a value for archiveInterval.
  Info... Using the default value = 48
  Defining archive log directory to/users/oracle/osw/lxodsdb1tst/oswbb/archive
  
  Test for the discovery of the utilities...
  VMSTAT found on your system.
  IOSTAT found on your system.
  MPSTAT found on your system.
  NETSTAT found on your system.
  TOP found on your system.
  
  Testing for the discovery of the OS CPU COUNT
  OSWbb is looking for the NUMBER of CPUS on your system
  NUMBER of CPUS will be used by oswbba to automatically search for cpu problems
  
  NUMBER of CPU found on your system.
  UC = 24
  
  Discovery completed.
  
  
  
  
  
  
  =================================================== on lxodsdb2tst =================================
  
  lxodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst > tar - xvf oswbb511_512.tar
  CD oswbb
  
  lxodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst/oswbb > ls
  analysis gif lock OSWatcherFM.sh oswib.sh oswsub.sh tarupfiles.sh vmstat.header xtop.sh src
  docs headers mpsub.sh OSWatcher.sh oswnet.sh profile startOSWbb.sh tmp vmsub.sh
  Exampleprivate.NET iosub.sh nfssub.sh oswbba.jar oswrds.sh pssub.sh stopOSWbb.sh topaix.sh vtop.sh
  
  
  
  xodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst/oswbb >./startOSWbb.sh
  lxodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst/oswbb >
  Info... You don't have a value for snapshotInterval.
  Info... Using the default value = 30
  Info... You don't have a value for archiveInterval.
  Info... Using the default value = 48
  Defining archive log directory to/users/oracle/osw/lxodsdb2tst/oswbb/archive
  
  Test for the discovery of the utilities...
  VMSTAT found on your system.
  IOSTAT found on your system.
  MPSTAT found on your system.
  NETSTAT found on your system.
  TOP found on your system.
  
  Testing for the discovery of the OS CPU COUNT
  OSWbb is looking for the NUMBER of CPUS on your system
  NUMBER of CPUS will be used by oswbba to automatically search for cpu problems
  
  NUMBER of CPU found on your system.
  UC = 24
  
  Discovery completed.
  
  From black box OSWatcher v5.1.1 Sun Nov 11 10:18:09 IST 2012
  With SnapshotInterval = 30
  With ArchiveInterval = 48
  
  OSWatcher Black Box - written by Carl Davis, Centre of Expertise,
  Oracle Corporation
  For questions about installation and use, please go to MOS (Note: 301137.1()
  If you need assistance or have any comments or improvements
  queries, you can email me [email protected]
  
  
  Data are stored in the directory: / users/oracle/osw/lxodsdb2tst/oswbb/archive
  
  From the collection of data...
  
  
  
  
  ==========================================install osw rpm===========================================
  
  quo
  CD/users/oracle/osw /.
  
  [root@lxodsdb1tst osw] # rpm - ihv osw-service - 0.0.6 - 1.noarch.rpm
  Preparing... ########################################### [100%]
  1:OSW - service # [100%]
  
  VI/etc/sysconfig/osw
  
  # Put OSWHOME in the directory where you have unpacked OSW or OSWbba
  #OSWHOME = / opt/oswbb
  OSWHOME = / users/oracle/osw/lxodsdb1tst/oswbb
  # OSWINTERVAL set the number of seconds between collections
  OSWINTERVAL = 30
  # OSRETENTION set the number of hours logs must be kept
  OSWRETENTION = 168
  # Put OSUSER to the owner of the directory OSWHOME
  OSWUSER = oracle
  
  
  
  
  [root@lxodsdb1tst osw] # / sbin/chkconfig osw on
  [root@lxodsdb1tst osw] # / sbin/service osw start

  Here's what worked for me (I had the same problem):

  I uninstalled the osw-service RPM.

  I've added in /etc/rc.local the following command:

  ~Oracle/bin/oswbb CD & / bin/su oracle-c ' source ~oracle/.osw_profile & nohup./startOSWbb.sh 60 240 > / dev/null 2 > & 1 & ".

  Where:

  ~Oracle/bin/oswbb is where I untarred archive oswbb520.tar

  ~Oracle/.osw_profile looks like this (it has the same content as the old/etc/sysconfig/osw):

  # Put OSWHOME in the directory where you have unpacked OSW or OSWbba
  OSWHOME = / home/oracle/bin/oswbb / ${HOSTNAME}
  # OSWINTERVAL set the number of seconds between collections
  OSWINTERVAL = 60
  # OSRETENTION set the number of hours logs must be kept
  OSWRETENTION = 240
  # Put OSUSER to the owner of the directory OSWHOME
  OSWUSER = oracle
  # Set the correct destination folder
  Export OSWBB_ARCHIVE_DEST = / home/oracle/log/oswbb / ${HOSTNAME}

  Published by: user13134683 on November 24, 2012 10:01

• VMware Server folders does not work in ESXi server, why?

  Hello

  My client is using VMware Server to run virtual machines.  Chose to go to ESXi server and I tried to copy and use the .vmx or hard creating VMware Server in the data store.  I tried to add them to the inventory, but his does not not like that.

  Computers are virtual created using VMware ESXi created VMs different server?  But the file extensions are the same.

  All entries on this observation?

  TIA

  You use VMware Converter to import your VM to ESX.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• c#, Win 2 k 3 server, Vix 1.6.2 VMWare Server 2 - does not connect

  Hi all

  I'm not the first hurdle...

  My class:

  using System;
  using System.Collections;
  using System.Text;
  using VixCOM;
  
  namespace IntegrationTesting
  {
       public class IntegrationTest
       {
            VixCOM.VixLib lib = new VixCOM.VixLib();
            VixCOM.IJob job;
            VixCOM.IHost host;
            UInt64 err;
            object results = null;
  
            public static void Main (String[] args) 
            {
                 IntegrationTest instance = new IntegrationTest();
            }
  
            public IntegrationTest()
            {
                 this.Connect();
            }
       
            public void Connect() 
            {
                 this.job = this.lib.Connect(VixCOM.Constants.VIX_API_VERSION,
                      VixCOM.Constants.VIX_SERVICEPROVIDER_VMWARE_SERVER,
                      null,
                      0,
                      null,
                      null,
                      0,
                      null,
                      null);
  
                 this.err = job.Wait(new int[] { VixCOM.Constants.VIX_PROPERTY_JOB_RESULT_HANDLE },
                      ref results);
  
                 if (lib.ErrorIndicatesFailure(err)) 
                 {
                      Console.Out.WriteLine(VixCOM.Constants.VIX_API_VERSION.ToString());
                      Console.Out.WriteLine(lib.GetErrorText(err, null));
                      Console.Out.WriteLine("Error code: " + err.ToString());
                      Console.In.ReadLine();
                 } 
                 else 
                 {
                      this.host = (VixCOM.IHost)((object[])results)[0];
                 }
            }
  
            public void FindItems () 
            {
                 this.job = this.host.FindItems(VixCOM.Constants.VIX_FIND_REGISTERED_VMS,
                      null,
                      -1,
                      new DiscoveryCallback(lib));
            }
       }
  }
  

  The output:

  -1

  The system returned an error. Communication with the virtual machine may be interrupted

  Error code: 16 {/ code}

  I tried to use

  NetSh int ip fireplace DISABLED {/ quote}, but it still does not.

  I can connect to the VMServer via https://:8308/UI very well.

  Anyone have any ideas?

  PS. This text/thread/post editor is absolutely, outrageously hideous

  You will need to use VIX_SERVICEPROVIDER_VMWARE_VI_SERVER

  Here is my implementation of connect:

  "M_host As String ="https://172.16.4.242:8333 / sdk"'"https://172.16.2.2:8333 / sdk"' specify ip NOT DNS"

  Dim m_port As Integer = 0 ' value does not matter to connect to VMWARE server 2.0

  Dim m_user As String = "user" "must pass to the user/pass explicitly; the current user does not work

  Dim m_pass As String = "pass".

  m_hostJob = m_lib. Connect (VixCOM.Constants.VIX_API_VERSION, VixCOM.Constants.VIX_SERVICEPROVIDER_VMWARE_VI_SERVER, m_host, m_port, m_user, m_pass, 0, NULL, null)

• How VMWare Server 2 does not support ip addresses?

  I set up and install VMWare Server on my server and train trying to install Plesk. I got the network works so I can download.  I want to give the virtual machine VMWare it's own IP so I can connect via PuTTY instead of the console, which for example won't let me paste url (plesk download url is long).  I intend to host a few websites on Plesk Virtual Machine. I added the IP address of my network provider gave me using "setup" in CentOS and it listed in/sbin/ifconfig, but still doesn't work. I have to first add IP to host your own server? A VPS can be used directly or an ip address?

  No matter if I use NAT or bridged and what is the difference?

  I have to add the IP address on the host as operating system?

  What do I need to run vmware - config.pl to create a new network?

  I was able to run by using the networks bridged on eth0 and add only the ip address on the ifcfg-eth0 on the VPS. I would like to know how VMWare manages exactly networks. Can someone answer the questions I asked?

  Using the bridged network settings your guest vm will look like it is plugged directly into a nic port. If the guest virtual machine can be configured with the same IP as host system. Great if you want to have external users easily connect to the guest virtual computer because just the ip address of your network outside the host either dhcp or static. Physical switches and routers knows the ip and the guest virtual machine mac address, dns is updated, etc.

  Using the NAT your guest vm settings you get an ip address translated using a subnet that you have configured for NAT when you run vmware - config.pl. If the guest virtual computer will be configured on a different as internal schema being behind a linksys router, you have at home. Good if you want to communicate with other guests of virtual machine on the same network NAT on your host and external network have access but don't want the outside network really know on the guest virtual machine ip and mac directly. So everything looks like the host entry.

  hope this helps - thehyperadvisor.com

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Audio CD does not automatically play when the CD is inserted

  I have my settings set to read a CD automatically when the CD is inserted.  I insert an audio CD, and nothing happens.  No music.

  Hello

  Welcome to Windows Vista community responses.

  (1) made audio CD playback with Windows Media Player or any other third party software?

  (2) have you been able to use this feature before? If so what are the recent changes on the computer?

  Windows does not read the CD-Roma automatically if you only use the real-mode CD-ROM drivers. Protected mode drivers are called to play CD-ROMs automatically when you insert them into your CD-ROM drive.

  To manually change your auto CD play settings in Windows Vista

  1. open the control panel by going to the start menu.

  2. double-click on the default programs icon.

  Now choose the third setting down. Change AutoPlay settings.

  

  4. now you can choose which action to perform with which program.
  5. press on the drop-down menu to make your choice.

  

  Response please back and let us know if this helped with your question or let us know if you need more assistance.

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Audio backgroung in app does not automatically restart when the video is finished or stopped.

  It was created in indesign CC.

  Audio stops when video plays, to hear the sound on the video. Background sound does not restart automatically.

  Article 3 video and background to play during the entire folio has been placed in Article 1. Suggestions?

  It is the audio/video interaction in DPS. Once the video begins, we will stop the background sound, and we don't no auto restart it.

  Neil

• Address bar does not automatically go to the pages

  I love Firefox 4, but a very important feature that I liked what was still in Firefox was not found in 4.0 but it was 3.

  Firefox would automatically redirect me to pages that would often appear first in Google when I typed in the address bar. For example, if I typed blog ps it would be b = me on the PlayStation blog, if I typed in gmail, it would bring right to Gmail, ect. But not there looking for just what I'm typing. When I type gmail it will bring up a search on google for gmail.

  I tried to see if changing some options in all: config but nothing worked so I reset that I changed.

  Help, please! I'm debating back to v. 3.6.16.

  The change between Firefox 3.6. * and Firefox 4 is how the location bar search. In Firefox 3.6, it uses Google search "search by name". With innovation by the name search, it performs a search on Google and if there is a clear match he will take you on the site, otherwise, it shows the Google search result. With Firefox 4 it performs just a search on Google, if you type in something that is not recognized as a URL.

  To get the behavior of Firefox 3.6 on Firefox 4, you must change a hidden preference.

  1. Type of topic: config in the address bar and press on enter
  2. Accept the warning message that appears, you will be taken to a list of preferences
  3. Locate the preference keyword. URL, double-click it and change its value on the link below

  http://www.Google.com/search?ie=UTF-8 & oe = UTF - 8 & SourceId = navclient & gfns = 1 & q =

  If you prefer, you can also do this by installing traverse it by extension - https://addons.mozilla.org/firefox/addon/browse-by-name