VMWare vCenter Server runs on AMD Quad Core A8 1.9 ghz CPU, 6 GB Ram?

Similar Questions

• VMware vCenter Server Appliance 5.1 is not Autostart cluster

  Problem:

  After a VMware vCenter Server Appliance failure does not start automatecly.

  I have configured to start automatecly to each host, but it does not start automatecly.

  My configuration:

  Shared infrastructure-plate-forme PowerEdge VRTX with 3 servers running

  -3 x VMware ESXi 5.1.0 (799733)

  -1 x VMware vCenter Server Appliance 5.1

  -Servers run as a cluster with HA.

  Unfortunately Autostart VM is not supported in a Cluster, and so the settings are ignored. VM in clusters must be turned on manually (or using a script,...).

  André

• Activate the VCA Mode of VMware vCenter Server Appliance

  Hello

  I'm pretty new on vSphere.  I have two hosts running esxi 5.1 what one of these hosts running the "VMware vCenter Server Appliance' with vSphere version 5.5.  I currently have a single cluster containing all the VMS as well hosts and the SAN.

  I try to activate the EVC mode, but when I try it tells me that the host is not allowed because there are powered on virtual machines.  I can turn off all the virtual machines except the vCenter device and I still get the problem on the host that has the device on it.  If I turn off the unit, I can't use vSphere to activate CVS.

  How can I activate CVS when vSphere does not work?

  Thank you

  Jeff

  Hi Welcome to the communities,

  This one is a bit complicated

  You have:

  1. turn off all VMs on Host1 (while vCenter device is on Host2)

  2 bring Host1 on Cluster, select CVS clustered.

  3. put all the virtual machines on Host2 (also vCenter device)

  4. connect on Host2 directly to vSphere Client Windows

  5. remove the vCenter inventory unit

  6. connect on Host1 directly to vSphere Client Windows

  7. the data store when the appliance and add it to the inventory of research. Power on

  8. connect the device with Web client or vSphere vCenter

  9. move the second host in the cluster

  And you're done

  Concerning

  Tim

• VMware vCenter Server Appliance 5.5 Active Directory domain are not under permissions

  Hey,.

  I use VMware vCenter Server Appliance 5.5.

  All Services are running correctly:

  

  I configured tge under authentication to Active Directory Service:

  

  But when I try to give permissions for groups and users to the AD.

  But it is not listed in the vsphere Client and WebGUI

  

  

  Can someone help me solve this problem?

  Are there any newspaper I can verify or any idea to check this?

  You will need to go to your SSO Configuration and set your ad as default domain.

  

  Once you do this, it will be displayed in the list.

• VMware vCenter Server, 4.1.0: resources for customizing Windows were not on the server.

  By using the vSphere Client, I created a customization of comments with 'Virtual Machine OS target' = "Windows".

  Then I tried to deploy a virtual machine from a Windows model. In the model "deploy" dialog box, in the "Guest" Customization screen, the 'customize using an existing customization specification' is grayed out and disabled and I see the following warning:
  Resources of Windows customization on the server have not been found.
  Why am I unable to use the comments Windows customization that I created?
  I am running: VMware vCenter Server, 4.1.0 345043 on Windows Server 2008 R2
  According to the VMware Knowledge Base system, preparation tools are integrated into the Windows Server 2008 R2 operating system and do not have to be downloaded
  Can someone help me solve this problem?
  Thank you

  Hello

  You can find the deploy.cab 2003 here: http://www.microsoft.com/download/en/details.aspx?id=23096

  XP here: http://www.microsoft.com/download/en/details.aspx?id=11282

  You must copy sysprep (extracts from the .cab) files on c:/programData/VMware/VMware VirtualCenter sysprep / (os)

  Concerning

  Stéphane Grimbuhler

  Senior consultant virtualization & storage (VCP / VCAP-DCA)

  VMware instructor (VCI)

• VMware vCenter Server able work on linux?

  Hi all

  I can't make pile or face of ESX documentation, there is no direct answers.

  It is possible to run VMware vCenter Server on the linux host? everywhere I see just winNT and XP support... in our environment is only the linux hosts and one or two win7 for running vSphere client...

  Is there a solution without throwing me money buy windows XP?

  Kind regards

  Vlad.
  

  vCenter Server is only available as a Windows application, you need at least Windows XP Pro 64-bit to run the latest version of vCenter Server (4.1). See http://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf (compatibility of OS for vSphere Client, vCenter Server...)

  EPI

• VCenter 2.5 U3 to VMware vCenter Server 4.1 on different hardware

  I have 2.5 U3 running on W2K3 32 - bit with SQL Express

  I need to 'upgrade' to VMware vCenter Server 4.1 moving to new hardware running W2K8 R2 (64 - bit, of course) also using SQL Express

  What would be the most logical way?

  Thank you

  SEB

  KB article http://kb.vmware.com/kb/5850444 describes how to migrate vCenter on a new host.

  André

• Easy VMware vCenter Server for Essentials Question

  Hi all

  We are looking to buy VMware vSphere Essentials for use in our Test/development environment and had a question about vCenter Server for Essentials. I know this is a light version of the 'standard' vCenter, but is there any reason that I could not run this version in a VM to manage the node 3 environment "Essentials" like I do in my "regular vSphere cluster?"

  TIA,

  -Jason

  I see no problem at all with your server vCenter Server running as a virtual machine. In addition, it is fully supported.

• Compatibility of VMware vCenter Server 4 Foundation to vSphere with ESX 3 Standard VI

  We are already use VMware ESX Server 3.5 VI.

  Our intention is to buy VMware vCenter Server 4 Foundation for vSphere addition VI ESX 3.5 Server running on a separate server. Our concern is;

  1. is VMware vCenter Server 4 Foundation for backward compatible product vSphere with VMware ESX Server 3.5?

  2 If no, then is it a similar product of VMware, which is compatible with VMware ESX Server 3.5?

  Please notify.

  VMware vCenter Server Foundation 4.0 can handle up to 3 vSphere or legacy hosts.  If you need to manage more than 3 guests, you should definitely consider vCenter Server Standard edition.

  ESG-VMware

  VMware communities user moderator

• VMware vcenter server woes

  Hey guys,.

  I just installed vcenter server to centralize control of my various installations of vmware server. I have essentially 4 machines I want to follow - 3 all running the same debian installation and last version of vmware server (free). the 4th is a windows 2003 machine that runs the latest vmware server too.

  I installed vmware infrastructure without problem, no error. iStart it upward, add a data center. add my first host - a linux host. works very well. I add a second host - another host.as of linux, I am setting up I get the summary of correct host and it lists even the virtual machines that are on the machine. It ends, says being synchronized to the top and then I get the dreaded "host type is not supported, or added to a cluster, but does not support the features of clusters.

  strange. am I adding as a cluster? I don't think so... I add windows machine and he adds without any problem. a linux server that I managed to add shows no information to the title of memory/CPU usage of the virtual machines, it is all 0. therefore graphics of performance - no graphics.

  what the hell is happening?

  Interesting - to - http://www.vmware.com/products/server/faqs.html

  Can I manage VMware Server 2 output using a new or existing VMware vCenter Server version?

  No, VMware Server 2 can be managed by VMware vCenter Server 2.5.  There is no option of centralized management (stream) for VMware

  Server 2.

  You do the impossible or maybe have found a hdden feature-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• AMD Quad-Core A8 - 4500M Turbo CORE

  Hello, I recently bought the cell phone following:

  • HP Pavilion laptop 17334 AMD A8 4 GB memory
  • Model #: 17-e118dx
  • Processor AMD Quad-Core A8 - 4500M accelerated with AMD Radeon HD 7640 G discrete graphics card class
  • AMD 8-series
  • Microprocessor: 1.9 GHz (with Turbo CORE 2.8 GHz)
  • Product number: G4X63UA

  I would like to know how to use the Turbo CORE... Or market, whatever it is. Y at - it a setting or software for that?
  Also, how can I find out about motherboard and that the processors going to? I have a 2.20 GHz processor in my old laptop HP I want to switch out if you accept it and do spin faster.

  Thank you!

  Chris

  Hi ChrisU_72,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion Notebook e118dx 17 and switchable graphics. Here is a link to a Overview of the switchable graphics. Your system will be automatically transmitted to the base of Turbo when necessary. It is not recommended to change the graphics because it could burn the graphics card.

  Thank you.

• VMware vCenter Server service stops or restarts at the start of data collection

  VMware vCenter Server service stops or restarts at the start of data collection

  I am using vCenter Server 5.0

  Whenever I have begin to collect data, vcenter service stops or restarts, if I stop data collection and to disable the agent, vcenter service again and works well.

  Please any help!

  Thanks in advance

  It is a known issue, relating to the collection of historical data being enabled (nonzero) in the properties of the VMWare Agent on the Agent status screen.

  Change to 0 to disable/re-enable the agent and it should fix the problem.

  Please open a ticket of level 1 with telephone support if you need more help.

• Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Only a single vCenter Server Heartbeat license is necessary to protect the components of the vCenter Server installed remotely, including SQL Server. A single license is also used for several UNIQUE for vCenter Server services protected authentication servers. A license is required per instance of vCenter Server.

• How does VMware vCenter Server Heartbeat communicate?

  How does VMware vCenter Server Heartbeat communicate?

  VMware vCenter Server Heartbeat supports configurations of single NIC or multi.

  Public IP address: this IP address is used by a client to connect to an Active Server, and move between the secondary and primary servers in the case of a failover or a passage.

  IP address of the channel: this is for communication between active and passive servers. This is used for the transfer of control and an asset to the passive server data and monitoring the State of an Active Server.

  In a LARGE network, static routes are used on switches to maintain ongoing communication.

  Management IP address: this address is used to access servers in a passive role. In a multi NETWORK card configuration, a NIC will have IP addresses public and management, and an another aura NIC IP address of channel. In a single NETWORK adapter configuration, all IP addresses are on the same network adapter.