Where is the version for 64-bit Linux?

Similar Questions

• Can't get the driver for 32-bit windows 7 HP DeskJet 5440 via windows update.

  Original title: driver HP DeskJet 5440 windows 7 32 bit

  I was unable to get the driver for 32-bit windows 7 HP DeskJet 5440 via windows update.  I also was unbale to find your compatibility Center.  Is there a link were I can down-load the driver directly from.

  Tony,

  In fact, I assumed that yours was always supported by HP * but I understand now that it's not [so I guess that it is more than 10 years because it is their general support period].  {* Mine is a DJ 2540 and is only a few years so I thought a 5440 DJ must be more recent}

  I see that HP gives you general instructions on installing drivers in http://support.hp.com/gb-en/product/hp-deskjet-5440-printer-series/445466/model/445467/document/c01796879/ I checked Microsoft update catalog service and nothing found for HP Deskjet 5440, that's why you're not having any success with the generic instructions, giving you these instructions seem to presuppose the existence of a Windows driver for this specific model.  {HP must have given up your specific model before that this catalogue has been compiled, because hardware manufacturers are those that connect to their drivers inside}

  However, my suggestions may solve your problem or maybe not.  They are simply the steps that seem more likely to be successful.  Personally, I'd a system image before you try each of these suggestions so that you can go back to square one if something goes terribly wrong.

  Suggestion 1 - go to the devices & Printers dialog box, click Add a printer, select HP then select HP Deskjet 5400 series [the sequence in the list is awkward, this entry is about 10% of the way to the bottom of the list], click on Next and follow the procedure of menus at its conclusion.  Even if it's completely successful, plan to run my Suggestion 4 below as well in case of future need.

  Suggestion 2 - out whatever the driver that shipped with your printer in the first place, try to install in compatibility mode [right click on its executable, click on the tab compatibility , the value of the check box for run this program in compatibility mode for... and select a BONE the printer worked correctly with.]  Then go to the executable, right-click and select run as administrator.  This idea is not frivolous, until he blew something internally, I was using my 1999/2000 HP Deskjet 1220C successfully on Windows 7 x 64 for four years [despite the HP user forums which implies that this was not possible].

  Suggestion 3 - go back to the HP site to http://support.hp.com/gb-en/drivers/selfservice/hp-deskjet-5440-printer-series/445466/model/445467 but select 10 Windows as your operating system.  In the results, the Diagnostics Utility Tools point contains now a setup generic [hppiw.exe] who described "HP for Windows printer setup wizard was created to help users Windows 10 download and install the software solution most appropriate for their printer and newer HP HP Windows 7 and Windows 8/8.1.   Simply run the tool and follow the on-screen instructions. " Download & run [run as Admin] of this file.

  Suggestion 4 - Connect to an Admin-level account first, then, using IE [there than IE], date back to the Microsoft update service catalog and search for HP Deskjet 5400 series.  It will give a lot of results, then click on the driver name in the left column of title to see details for each potential choice [especially if it is 32 or 64 bit].  The top of the list is [32-bit] Microsoft Update for HP Deskjet 5400 Series driver dated June 21, 2006.  [You might also download & file the second element, the 64-bit version, just in case you change computers in the future]  Add the chosen driver [s] to the "trash" then download - you will be asked to select a file to download first {it is at this stage that the process would be a break without further explanation or any error if you had not been connected to an Admin-level account before launching IE}.  I think that these drivers also work with Windows 10 thus, in the hope that your printer works for the years to come, it would be well worth your copies of maintenance of them filed there ready for your next computer use.

  Proposal 5 - go [back] to the forums of user HP Deskjets & find 5440.  See if any of the other suggestions can help you - unless you have already looked through them all the more relevant [I realize that you have been here once already as one of the threads that I just watched was of you].

  We know, in advance, which of these suggestions will lead to the best possible solution.  So please come back to this forum to explain what happened when you tried the.  Your experiences will benefit all users of HP Deskjet 5440 who come here looking for advice.

  Good luck

• where is the plug for camera raw, Photoshop CS5?

  where is the plug for camera raw, Photoshop CS5?

  I can't view file on my Photoshop CS5 nikonnef

  updated ps cs5 for the latest compatible with it, cr http://www.adobe.com/downloads/updates/

  If you need a later version, you must upgrade your ps or use the dng converter.

  DNG converters:

  Win
  Mac

• Where is the support for OpenGL 2.1 (Fusion 3.0)?

  I just installed Fusion 3.0 and started the virtual machine Windows 7 x 64 but every OpenGL application that I try complains OpenGL old or missing drivers. Aero and DirectX applications work (slowly). My host computer is iMac 24 inch (early 2009).

  For example, oZone3D HardwareInfos says that OpenGL support is 1.1 and only two old OpenGL extensios are supported. For example, the very important OpenGL VBO (vertex array object) extensions are completely absent. These extensions are part of OpenGL from version 1.5. I have VMWare tools installed and supported 3D Harware activated from the Virtual Machine menu.

  What is c? Where is the support for OpenGL 2.1 promised?

  jantsuh wrote:

  I just installed Fusion 3.0 and started the virtual machine Windows 7 x 64

  After review of Macworld, OpenGL 2.1 support is only for Windows XP:

  «Wine is OpenGL acceleration for Windows machines (OpenGL 1.4 in Windows 7;» OpenGL 2.1 in Windows XP). »

• What is the plan for 64-bit Windows?

  The 11G Express Edition Beta installed without warnings or errors on a virtual machine in Windows 7 64 bit. However, after installation, the following error message appears more than once in the journal alerts:
  
  7451 REL in the load indicator: Error Code = OSD-04500: illegal option specified
  S/O-error: incorrect function (OS 1). !
  
  This error is repeated every 10 seconds in the journal alerts.
  
  I understand that this is probably because of the 64 bit OS. However, it is almost impossible to buy a Windows system today is not 64-bit. If the plan is to provide only 11 G Express Edition Beta 32-bit version for Windows, I think he should at least install and run in 32-bit mode on 64-bit Windows operating systems. Or is a 64-bit version for Windows in preparation?
  
  Thank you! It's great to see progress on 11 G Express!
  
  Published by: user468360 on April 13, 2011 12:08
  I've probably hidden my question with the alerts log error code. I changed the subject to my real question: what is the plan for 64-bit Windows?
  
  Given that almost all windows systems are moving quickly to 64-bit, 11 G Express will be available in a package (32-bit or 64-bit) that installs and runs correctly on a system with 64-bit windows? Should we report bugs related 64 bits seen with the 32-bit install package so they can be fixed or just a 64-bit package? Thank you!

  A version of 64 victory will come out with the production. We had to choose more platforms or to release the beta version faster.
  -kris

• Where are the fonts for FCPX located?

  Hello

  Where are the fonts for FCPX in my MacBook Pro to mid-2015?

  There are 3 files for fonts: System/Library/Fonts, Library/Fonts, ~ Library/Fonts.

  It seems to be Library/Fonts, but I see that some are not used in FCPX, so I want to be sure. If I'm right, why some is used in FCPX? Looking for don't not to add them, just curious.

  The best

  Elmer

  All fonts are system fonts, no specific applications.

  Fonts can be of different Types of fonts.

  FCPX uses only specific fonts Types, not all types, the system recognizes.

• Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  This is a user forum. You to read the terms of use to which you agreed to when registering, you would have been aware that the participation of Apple here is minimal.

• Error in the printer for 16-bit application that runs in Windows7 32 error "caused a floating point exception in hpcui121.dll to 0x5b39caea.

  Original title: Error in the printer for 16-bit application that is running in Windows7 32

  I have a 16-bit application. I'm running Windows 7 32. All of a sudden, I can't print my application. I have two messages: "caused a floating point exception in hpcui121.dll in 0x5b39caea" and "caused an access violation in WOW32. DLL to 0x6dc50421. Any help to solve the problem would be greatly appreciated.

  Hello

  Have you tried the methods suggested in my previous post dated August 29?

  Response to help you further.

• Can I get the version for students?

  I'm German! I do a voluntary social year. "Developed Soziales Jahr". Can I get the version for students?

  Purpose not-for-profit http://www.adobe.com/volume-licensing/non-profit.html

• I would like to install my Adobe Creative Suite 5.5. on my new laptop (Mac), unfortunately, this is the version for Windows. Should I me is it possible to switch from Windows to Mac?

  I would like to install my Adobe Creative Suite 5.5. on my new laptop (Mac), unfortunately, this is the version for Windows. Should I me is it possible to switch from Windows to Mac?

  You must upgrade to CS6 in the platform. Refer to this:

  Exchange a product for a different version of the language or platform

  Creative Suite 6

  Mylenium

• LR 6 for Windows 7. Is there a version for 32 - bit systems?

  LR 6 for Windows 7. Is there a version for 32 - bit systems?

  Adobe without notice only provides 64-bit ;-(

  N ° there is no 32-bit version.

  Mylenium

• Aplplication Manager: where are the Versions "CC"? ".

  Hello everyone!

  Where are the Versions "CC"? ". The application manager says CS6. Or do the CC installed if I choose CS6?

  Hi Katja, currently we have CS 6 as part of the creative cloud apps.

  CC applications are not yet launched, they will be available later this month.

  See this: http://www.adobe.com/products/creativecloud/faq.html

• command to know the version of perl on linux

  command to know the version of perl on linux

  Salvation;

  You will find all the details at the link below

  HOWTO knowledge perl version
  http://www.Cyberciti.biz/FAQ/How-can-i-find-out-Perl-version/

  Respect of
  HELIOS

• How can I check the version of Oracle on Linux?

  Hi all:
  
  How can I check the version of Oracle on Linux?
  
  
  
  
  Concerning
  Terry

  Hi terry;

  How can I check the version of Oracle on Linux?

  You mean your version of db or something else? If you mean you want to check your version number is:

  env as oramgr source file
  sqlplus "virtue sysdba".

  When you open a sqlplus session it will give u something like below:

  SQL * more: Release 10.2.0.4.0 - Production on

  Respect of
  HELIOS

• Not able to see the published task and not able to reset the version for the task

  Hello
  
  Created a task, validated, by selecting the task button you click on publish in the tools to publish the task.
  Customer application (Callcenter) sailed Administration - Business Process - > deployment task
  Here, unable to see the task added to activate.
  
  I tried twice to copy folder but not able to see.
  I am not able to reset the version for the created task.
  
  Could you please let me know how to overcome these.
  
  Using the database of the siebel8.0.0.5 example
  
  Thank you

  NO, you don't have to copy the srf tools file to the location of the customer.

  just when compiling your project or changes you must click on the Browse button and navigate to the customer i.e. srf "/ web client/objects/enu/siebel.srf".

  but before, also compile all projects to the strategic outcomes of the client.

  the other thing you should check is client and tools should point to the same database that you should check the cfg files of the two respectively in [[example]] section connectstring = "\sample\utf-8\sse_samp.dbf."

  no doubt, maybe that's the problem.

  Neeraj Varma