VMware View Login for users

Similar Questions

• Overview of VMware VIew Client for Linux

  Hey everybody

  Is there a table of software compatibility for VMware View Client and Linux Horizon? We would like to use the client on devices based on linux, but we do not know what linux operating systems are currently supported.

  Dou you have a formal link or are you aware of the compatibility?

  Best regards

  Documentation (https://www.vmware.com/pdf/horizon-view/horizon-client-linux-document.pdf):

  Operating systems: Horizon customer 3.2 supports the following operating systems.

  Operating system	Version
  Ubuntu Linux	12.04 or 14.04
  Red Hat Enterprise Linux (RHEL)	6.5
  SUSE Linux Enterprise Desktop (SLED)	11 SP3
  CentOS	6.5

  IMPORTANT only 32-bit systems are supported.

  * Horizon customer 3.1: 32-bit Ubuntu Linux 12.04 or 14.04

  * Display Client 2.x: Linux 32 bit Ubuntu 12.04

  * View Client 1.6 and 1.7: 32-bit Ubuntu Linux 10.04 or 12.04

  * Display Client 1.5: 32-bit Ubuntu Linux 10.04 or 10.10

  VMware customer Horizon for Linux Release Notes

• VMware view environment for the objective test

  Hello

  I test an application in vmware view environment. Set up a domain (two clients an Ant controller) and I try to install the clients and server of vmware view. Someoane can tell me where I can find a step by step installation guide?

  Thank you inadvance.

  William.

  You cannot install the vcenter on 1, 2 or 3. you need to find #4 =). It cannot be shared with any of the current role server. vCenter 4.1 required 64 bit windows 2008 r2.

  with VMware View, you create a virtual office. 1 Virtual Office = 1 session. and oh yes you will find # 5 which is the host ESX Server where you will be virtual office say windows7 or Windows XP.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• VMware view floating / dedicated user settings?

  Hello.

  I'm relatively new to this view of vmware, did some research and currently arose a system in a laboratory on a license eval for tests.

  It's basically for future planning where we want to go with our company, having 15000 employee with very various and other requirements.

  Centralization of our infrastructure COMPUTING for all sites, creating less configurations for most users will be preferable and applications management.

  but here the question arises.

  with a floating pool, you are obviously less force on the hosts and multiple users use the same vm, but I can't find an option of persistent disk.

  that means, user settings will be locked to this machine, which is most likely, will be handed over to another user, the next day, or the next few hours or so.

  then if he have settings in an application they will not be present if he next time connects to another virtual machine.

  Pools dedicated, if we say in this site, I am, have 300 users, we want to give the soltion for via the dedicated mode, they will be able to have a drive and then persistent would circulate in fact of the virtual machine, but they are entitled to this specific machine, which would end up with vm 300 s then? instead of 150 possibly with floating?

  I'm confused about the idea behind the float we can ofc use of roaming profiles in AD or change envoriment variable at home in the car, but always then settings would not follow the user.

  Thank you.

  Everything you said is correct.  The persistent drive option is not available when using the flexible pools and in order to use full them you will need a type of process of redirection of folder/management profile in place.

  The persistent drive options are available on the dedicated pools that would impose the you need a desktop computer for each user who connects to this pool.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• How to create a login for PHP users

  How to create a login for users to access their data, currently, I don't see the first user each time I connect with a different user name. I know that I need session stuff but don't know how to use, add or where to put them.
  Thanks in advance.

  Hello

  Find this in your login page:

  session_register ("MM_Username");

  and then you add a session variable in MX called it:

  MM_Username

  then on any of your pages that calls the base to make sure that you use the = MM_Username and then you're all set; Make sure that the tables have a field to reference the session MM_Username variable.

  See you soon
  Let me know if you just come!

• Help with renovation Horizon View client for Mac

  I'm packaging the client VMware View Horizon for our Mac desktops and laptops (we have about 150). Normally, it is a very simple and very easy process with this client because it is just a soft. We use Apple PackageMaker to repackage the Horizon of VMware View Client.appand add the plist for the test user for the deployment of future users profiles. We used some com.vmware.view.plist in the past to ensure that our connection to the server is prefilled and force PCoIP. It has worked great for us with all < 2.3 versions.

  From 2.3 and 3.0 now, I have not been able to repackage the application correctly. I have download the .dmg to VMware and copy the .app in it in / applications; This is exactly how a user would install it on their system. I run the Client discovers once and connect to our login server using the settings I want to paste when you deploy this application to our machines. Then using PackageMaker, I point the first part of the package that will be created for Applications/Vmware view Horizon Client.app as usual (including the roots). It's normal. I choose com.vmware.view.plist file, and I'm using a plist Editor, delete the entry for my test user name and office that I'm connected to. In PackageMaker, the destination of this .plist file is in the default profile for the mac - so whenever a new user connects to the mac, they will receive the file .plist with the parameters we want. Sounds good. The package is built successfully. I deploy it on a machine to test successfully.

  When I connect on a test system and run the client from the view, I can connect properly. If I try to use the menu connection/printing enabled, all hell breaks loose and I get a series of errors;

  Invalid file in the package.

  The file is not valid:

  / Applications/VMware Horizon view Client.app/Contents/Library/thnuclnt/thnusetup.sh.

  Please download the official product.

  If I try to start services remotely USB, I get a similar error once it issues a warning that I will be asked to enter the credentials of the admin;

  Invalid file in the package.

  The file is not valid:

  / Applications/VMware Horizon view Client.app/Contents/Library/InitUsbServices.tool.

  Please download the official product.

  ?? If I run the app from the .dmg on this same machine, I have no problem. Any ideas?

  OK, I just had to put the question so that I could think clearly through it.

  There are some extended attributes on these shell scripts that PackageMaker removes when it reconditions the app. I conditioned as a .dmg, and copy the app via the postinstall script in the pkg... works very well after that.

• Poor performance VMWare View 4.6

  We deployed a small VMWare View solution for administrative personnel, accounting and CAD / drafting of users. Currently, we have race 21 VM and received daily complaints about the performance, some days better than others but all well below the level of performance of a desktop computer configured in a way appropriate. We are either duty put an end to the use of the output of this system and return to the standard desktop computers or add an additional server to view VMWare and persevere, we can find the cause of the weak performance of hope.

  Here is the specification of

  The virtual computer running server:

  Dell PE R510, 2 x 6 core Xeon 5670 CPU clocked at 2,933 ghz, 64 GB of memory, TB 1.81 storage Raid 5 using 6-disc 7200 tr / MIN SATA 6 g, NICs 4 x 1 Gbit

  Configuration of the VM:

  Windows 7 32 - bit, 2 CPU and 3 GB of memory by the system, we have 3 pools Clone related to the installation of specific software for accounting, Admin, and CAD.

  I can't see were the loss of performance is. Sometimes the users sessions hang for a few seconds when they choose the various functions in the office or AutoCad, then the system is again significant. Other times the screen quality degrades a bit before clear. For some office programs take an excessive amount of time to load and become available. Sometimes to connect or general file / network access is slow, summary record lists taking extended periods to update or view the content. Sometimes of functions such as print and trace take excessive amounts of time before appear in their respective dialog boxes.

  I've attached screenshots of our performance to review statistics. Any help would be welcome.

  Hi Matt,

  Please provide more information.

  On a hardware RAID 5 type 6-pin, your number of IOP on a RAID 5 is about 130 IOPS / s based on an 80% writing / reading of 20% ratio.

  You use 21 workstations more than 130 IOPS / s, then you're essentially allowing for 6 inputs/outputs by the office without any room for overhead.

  Now, if you have moved to 15K SAS with the same amount of battery, you would end up with a result of 304 IOPS / s based on the same report.

  21 offices spread over 304 is 14 inputs/OUTPUTS per desktop, but again, no overhead.

  Essentially, simply by moving to 15 K SAS, you more than double your IO, but your RAID set is not optimal.

  If you went hardware RAID 10 with the same number of PIN, your IOPS / s would rise to 555 based on the same ratios.

  21 workstations more IOPS 555 / s 26 IOPS / sec per desktop computer that comes close to the 30-40 recommended for VDI.

  If you can afford to go 8 x 600 GB 15 K on your R510, surprise you pleasently with performance - he would net you have a 740 IOP account

  21 offices on 740 IOPS / IOPS 35 s / s by the office which is more in line with the recommendation of VDI.

  I mine with a range 40 IOPS / sec per office more overhead, and we have no problem on our end here.

  Do not give up, with a little more work and planning, you could end up with a great platform - we use the R510 is there as well and love them.

  I hope that helps you, it's a great place to ask questions and get answers.

  I'm also on Twitter if you want to ask more questions, more than happy to help you!

  See you soon!

• The simplest configuration of vmware view?

  Good evening

  We have a small project with 5 desktop computers (= Users) and we think that it would be a good place to test VMware View.

  Unfortunately, it seems that we must implement the 4 servers to serve 5 customers:

  • See connection to the server
    
  • VMWare vCenter Server with View Composer
    
  • ESX Server
    
  • View transfer server
    

  What is the most simple and functional solution for VMware View with 5 users?

  The only software they use is a simple accounting tool that works very well with 100 k of memory...

  We hope that we can install a simple solution like this:

  HP (server) hardware with:

  • ESX Server with:
    
    • 1 x Windows 2008 R2 with Active Directory and the file server
      
    • 1 x Windows 2008 R2 with VMWare View to serve the 5 office users
      

  Unfortunately, there are no pre-sales VMware does support form / email (we hope that there is a customer support).

  Therefore, it would be great if someone can help us to answer this question.

  Thank you very much in advance,

  Kind regards

  Thomas

  I also wonder how this bake-off will go. I hope that the victories of view! In order to achieve this please take a good look at the documentation of the view. I also highly recommend that you take a look at the guide to optimize Windows 7 to see: http://www.vmware.com/files/pdf/VMware-View-OptimizationGuideWindows7-EN.pdf

  This will show you how to build a good image of Win 7 basis for review. Also note that it is strongly recommended that you build your base images starting from zero and NOT P2V them. You can quickly and easily build images for operating systems Windows using MDT 2010 update 1. This tool is free and is Microsoft. I strongly recommend that you take a look. In addition, many optimizations for Win7 and view are also good for use with Xen. Good luck.

• VMWare View with RSA SecurID integration

  Hi all.

  We try to make VMware View to authenticate users through RSA SecurID according to the attached document. However, it is not clear where to put the node Secret file that is generated on the RSA Authentication Manager server? It is exported in the form of .rec file and is protected by a password, but server configuration view has all fields to load the node secret file. Should I simply rename the securid .rec file and put in %SystemRoot%\System32\securid? But how to do View Server to decrypt this file by using the password then?

  On the RSA server, I see in the newspapers:

  2010-03-12 08:05:49U-

  ---

  /viewservername.company.com-

  ---

  12/03/2010 03:05:49U verification of node doesn't have a rsa - ace - server.company.com

  RSA doc says

  "An incompatibility between the secret of node stored on an authentication manager and subsequently stored on an Agent Host may occur if you delete and re-create an Agent Host, or if you accidentally delete a secret file of the nodes. The incompatibility prevents messages between devices which is decrypted and causes the Agent Host deny access to all users who attempt to log on. Node of that check failed is recorded in the audit trail.

  Hello

  for me it is look like this attached image.

  MCP, VCP

• Virtual office to backup VMWare View linked Clone

  Hi all

  I would like to know what the best method is to save the virtual office linked clone on VMWare View. For the moment, I use the latest version of vRanger Pro connection with VCB integration.

  I don't know if I should save the linked clone himself or the parent VM. What the parent snapshot?

  Please advice. Thank you.

  Sang A

  in a persistent pool would really matter because there is no guarantee they would never return the same office again.  If you have a properly configured user environment then persistence or no persistence would not matter that the data would be stored in a place that would be subject to a backup system.   I don't understand the need to safeguard a VDI guest.  back to top comments templates, view servers and the vCenter server.  Comment no way.  backup windows are pretty long already to go back up throw away from devices.

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

  Tom Howarth VCP / vExpert

  VMware communities user moderator

  Blog: www.planetvm.net

  Writer for the next book ' environment virtual VMware Infrastructure Security: securing ESX and virtual. "

• Client VMware View Android: how hide the status bar at the top

  Hi all

  I'm testing the VMware View Client for Android. A question that bothers me is the status bar I am displayed at the top of the screen. I mean the bar that displays the Logo of VMware View and several icons for the control settings.

  Is possible to hide this bar? I have not found a switch in settings or in the official manual. The thing is: I think that it should be possible somehow, as a video YouTube of VMware shows: http://www.youtube.com/watch?v=85uJqkn-UV4

  I'll be grateful for any comments...

  air flow

  After upgrading the client to view to the last version(>2.0), he supports the mode full screen. You can activate it via clicking on the button full screen in the menu of the dock bar.

• Customizing the portal of VMWare View 5 Page

  HELO all,.

  We test Vmware view 5 for an implementation of the medim scale possible. We have all the settings and it works fine. There is one thing that the sentence is me: the Portal Page. Normally, the portal page tells you that you must install the client and it redirects you to the Vmware View client download page. I managed to find documentation that tells you how to customize and I had to show him a few links that will download the client to our own server. I have attached a screenshot with where I am now (vmwareviewcurrentportal.jpg) right; What is the best... but watch some training videos, I noticed that, after the trainer install Vmware View connection to the Portal Services looks diferent (in a better way). I've attached screenshots of what its like (VmwareViewDesiredPortal.JPG) looks like w.

  Essentially: it has radio buttons in the software selection and a download button. After choosing your Customer Portal redirects you to a page (VmwareViewDesiredPortalInstructions.JPG) of the instructions.

  -I know that it is a kind of model because the images to help guide are stored in C:\Program VMware View\Server\broker\webapps\ROOT\portlets\client\images on the Vmware View connection server.

  The question is: how setup/activate this portal? Any help would be greatly apreciated.

  Thank you

  Adrian

  Fear not, we stayed at a compatible screen for all types of customers. I'm sorry.

• VMware view client have support ubuntu?

  I'm going to depploy VDI environment. But there are many os (windows, mac, ubuntu and centos). Please help me how to install vmware see run on Ubuntu. Thank you

  Maybe http://blogs.vmware.com/euc/2012/03/vmware-view-client-for-mac-and-linux-are-now-generally-available.html can help.

  André

• Deleting events in VMware View administrator

  Hello

  How can I remove events in the administrator of the display (here I have the version 4.6)?

  Due to a configuration problem now I have the same error over 3,000 events, and I'd be happy if I can delete them.

  Kind regards

  André

  You might be able to delete directly from SQL, using the events and event_data tables in the case of database.   I found th informaton below on page 10 of the guide to integration of VMware View.  I want to backup my database of events before performing any manipulation.

  VMware View provides details on all tables of database events. After a certain period of time elapsed

  Since writing to event record, VMware View deletes the record of the event, and event_data tables. You can

  Administrator display allows you to configure the period for which the database maintains a register to the event and

  tables of event_data. See the

  Installation of VMware View document for more information.

• The user of VMware View desktop

  Hello

  When a user login to VMware View for the first time they are assigned to a complete virtual machine, but their AD user account is not added to the local administrator group.

  Is there a way to automate this?

  Also, is there a way to force the sysprep command to add this machine to a specific OU in active directory?

  Thank you

  CS

  Hello.

  Why they would be added to the local Administrators group?

  I guess the best way to achieve this would be to add users to an ad group and add this group to the local administrator group.

  Linjo