Volume control for Captivate tutorial?

I used version Adobe Captivate 3. I noticed that all the skins have a mute volume, on and outside but no control volume.

If anyone can tell me how to add a volume control that you would make my year!

Thank you very much.

Leona :-)

I don't know how to integrate it into the play bar.  But, I have inserted the slide 1 (insertion, Animation) and set its properties to display for the rest of the project.  If you can find a place on your slides, where it is possible that does not any part of your content, probably somewhere near your PlayBar, you might consider that.

Mister C.

Sorry, I missed the part of your post.  I also downloaded and tried playing with the Volume slider bar.  You need to unzip the file, then take the playbar_with_volume_slider.swf and put it in C:\Program Files\Adobe\Adobe Captivate 3\Gallery\PlaybackControls\SwfBars.  Again Captivate.  In Captivate, open the editor of skin (project, skin).  Under the playback control tab, click the down arrow for the play bar.  You should see the new playback bar in the list.

But I couldn't have the PlayBar to work (other than the volume adjustment slider.)  Sorry about that.

Mister C.

Tags: Adobe Captivate

Similar Questions

  • How to download the program Volume control for the taskbar

    Where can I get the installer of the volume control for my taskbar. I've triedControl Panel >sounds and Audio devices > check "Place Volume in the taskbar icon .

    When I check the box for "place volume icon in the taskbar" it gives me an error and says "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it, use Add/Remove programs in Control Panel.

    Where can I get the program from?

    You mention that your netbook is HP. Most of the HP products have a recovery partition. If this is the case:

    -Click Start-> Run

    -Type in cmd

    -Type in the following, substitute the C:\ and D:\ readers with your partition recovery and partition system respectively:

    Expand c:\i386\sndvol32.ex_ d:\windows\system32\dllcache\sndvol32.exe

    -Press enter, and then type:

    Expand c:\i386\sndvol32.ex_ d:\windows\system32\sndvol32.exe

    -Type exit and press ENTER.

    Your Volume control should now be restored. You can check this by opening the sound and Audio Control Panel devices and by checking the box to the volume icon to Place in the taskbar.

    If your problem is not solved or there is no such thing as a recovery partition after the return

    Hope this helps

    ____________________

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Creating a bar of the Volume control for multiple audio files

    I'm pretty new to Flash and developing a project with a series of images containing unique video clips. Each of these frameworks are accessible via a menu based all chapter in being visible straight like a regular movie. I just added the audio for each 'chapter' / framework, all of which are unique from each other. I'm having a problem with the creation of a volume control bar that affects all the sound elements throughout all the images in the control bar unique on the General interface/skin that these chapters are working on. (With the help of Flash 8)

    I developed a sliding control bar, that works, but does not affect the volume, somehow. Is there something wrong with the coding that I use? (The control bar consists of a button nested in a clip and the action is applied to the mc. The bar/line to follow is 60px banner for a long time and control is to move horizontally while the increase reflects the increase in the volume. The original code was for a 100px line leave a tutorial from macromedia that I adjusted to be 60px banner) advice on best practices for the creation of a volume control bar would be greatly appreciated! (I currently have all of my audio files on separate layers, should I be placing these in a mc rather than just having them on the main timeline?) Thank you!!!

    Answering my own question...

    Each individual swf has the code...

    var my_sound:Sound = new Sound();
    my_sound.loadSound ("someSound.mp3", true);
    my_sound.setVolume (50);

    Code on the shell/main drag...

    OBJECT SOUND
    var sound: Sound = new Sound;
    soundtrack.setVolume (50);
    END OF THE SOUND OBJECT

    GLOBAL VOLUME CONTROL
    var nVolCheck:Number;
    volSlider.volBall.onPress = function (): Void {}
    this.startDrag (false, 0, 0, 0, 75);
    nVolCheck = setInterval (updateVolume, 150);
    };
    volSlider.volBall.onRelease = function (): Void {}
    this.stopDrag ();
    clearInterval (nVolCheck);
    };
    function updateVolume (): Void {}
    var flight: Number = (volSlider.volBall._x) * 2;
    soundtrack.setVolume (flight);
    };
    END OF THE GLOBAL VOLUME CONTROL

    My bar is 75 pixels in width and volume is being increased from 1.5 to peak.

  • Help with Volume control for the video player

    Hey!

    My video plays and stops correctly on my video player, but I can't understand this volume control. My cursor moves to the way I want it, but the volume does not adjust. Please tell me what is wrong with my code:

    slider_1.onPress = function() {}

    this.startDrag (true, _root.volume_bar1._x, _root.volume_bar1._y, _root.volume_bar1._x + 133, _root.volume_bar1._y);

    }

    slider_1.onRelease = function() {}

    this.stopDrag ();

    }

    slider_1.OnMouseMove = function() {}

    newPoint = new Object();

    newPoint = this ._x

    newPoint = this ._y

    _root.volume_bar1.globalToLocal (newPoint);

    _root.demo_reel.setVolume(-1*newPoint.x);

    }

    I watched a tutorial and died this code, but of course my own instance names.

    Thanks in advance!

    use:

    paramsF (slider_1, _root.volume_bar1._x, 0, _root.volume_bar1._x + 133 100);

    slider_1.onPress = function() {}

    this.startDrag (true, _root.volume_bar1._x, _root.volume_bar1._y, _root.volume_bar1._x + 133, _root.volume_bar1._y);

    }

    slider_1.onRelease = function() {}

    this.stopDrag ();

    }

    slider_1.OnMouseMove = function() {}

    _root.demo_reel.volume = this.m * this._x + this.b;

    }

    function paramsF(mc:MovieClip,x1:Number,y1:Number,x2:Number,y2:Number):Void {}

    MC.m =(Y1-Y2) /(x1-x1);

    MC.b = Y1 - mc.m * x 1;

    }

  • How can I reinstall the volume control for vista/firefox?

    I've always had control of volume at the bottom of my computer vista laptop and it is now gone. How can I get that back?

    See this - http://www.vistax64.com/vista-general/121116-help-my-volume-control-gone.html

  • vollume error C volume control for problems

    I have a problem with the bugcheck C.When disk I want to check the disk for errors, restart the computer, starts checking and he says that the reader cannot be controlled because of a recently installed softwere and an error code is displayed. Also in the deferagmenter disk drive C does not exist despite the fact that it exists.

    My av is 2013 of bitdefender internet security. I'cant restore WINDOWS because, SAID of WINDOWS, I have the av on. Help, please.

    The error code is 766f6c756d652e63 3f1 displayed in disk error C check once windows starts.

    You have a failing hard drive that needs to be replaced. Back up your data on external media files immediately. You have the means to reinstall windows and programs on a new hard drive.

    Empty the Wise Registry Cleaner.

  • The volume control for notifications

    Hello

    Y at - there any procedure to the silent notification volume at the same time the call ringtone to its maximum in Moto G (2nd generation)?

    Yes, I have a solution.

    Go to settings > sounds then in notification ringtone, click it and then select storage then on top there no option slect, after that there will be no notification tone.

  • Issue of volume control after downgrading A210-1AS for Win XP

    Hey all,.

    I recently upgraded my satellite A210-1AS to xp and after sorting more things, including the audio drivers, wireless, etc, I have some problems (surprise, surprise)

    1. the sound adjustment on the front wheel can't control the volume, although it worked fine in Vista.
    DD realtek audio Manager is installed fine, AFAIK. Any ideas how to solve this problem?

    2. the buttons on top to control the media work more (toshiba easykeys?).
    Are there drivers for these that everyone found for XP?

    3. (and I'm not too fussed on) there are 3 yellow exclamation marks in Device Manager.
    1. I believe is the modem, which I am not at all worried, the other 2 I do not know. Any ideas?

    Thank you very much for the replies, would be nice to sort. Although I could use volume control in xp, it is not ideal, as I'm sure you can imagine.

    Will check in the morning, thanks again

    Hi Joshua

    I m the owner of the Satellite A210. This laptop is similar to the Equium A210.
    I installed a Windows Vista and XP on the second partition and I have the sound and the sound volume control works very well with both operating systems.

    But I had a little problem with the installation of driver sound. After a short investigation here in the forum, I discovered that I need to first install MS patches; KB888111 and KB835221.
    After installing the patch, I installed the Realtek audio driver. It worked like a charm.

    (2) control buttons doesn't work on my laptop because I have an A210 with the AMD processor and chipset and XP from Toshiba Utilities for my series are not available.

    (3) I have 2 yellow exclamation marks in my device manager. The modem works because I installed the modem driver from an another series of notebook A210. The driver also works.
    Two other unknown devices ("possibly PCI memory controller" or "Mass Storage Controller) may be linked to the material that is only supported by Windows Vista and not XP. Therefore, the XP drivers don t exist also.

    Good bye

  • Volume control is not showing up for following

    The volume control has disappeared to the individual tracks.  Anyone know how to get it back?  I can't find the right button.

    Here is a screenshot:

    Just lay the track header to make room for the volume control and pan buttons... Click and drag right at the end of the track header border.

  • I need to reinstall Windows XP games and also my icon for the volume control in the taskbar... all are missing

    Remote assistance in cleaning up my computer files broken (probably accidentally) deleted all my games that come with XP and also removed my volume control icon in my taskbar, which I just can't go back.

    You can install the games of Panel > Add / Remove Programs > Add/Remove Windows components> Accessories and utility . Boulder computer Maven
    Most Microsoft Valuable Professional

  • Volume control does not appear on the screen when I try to activate it. This has never been a problem until now. How can I get this working again?

    The volume control is located at the bottom right of my sidebar it me has not given any problems so far. Now, he just will not appear on the screen when I try to call. This has never been a problem before. I really did something to screw things up (again!) today. This is the first time I had this problem.

    Next time please indicate what opersting system you first use before describe you your problem.

    You can start by doing a system restore. Choose a date on which your Volume icon in the taskbar.
    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    If for some reason it does not restore the Volume icon, then...

    For Vista, use this tutorial:

    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    You can try a method first. If the Volume box is grayed out (is usually), go to method 3.

    2. for the Volume icon

    To activate the Volume - icon Enable_Volume.reg< click="" to="">
    Then, follow the instructions from #5 to #9.
    Make sure that you restart the computer to complete the process.

    For Windows 7, use this tutorial:
    http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

    Go directly to the Option two

    9. to activate the Volume icon

    (A) click on the download button below to download the file below.

    Enable_Volume_Notification_Icon.reg

    then follow the instructions from #11 to #15.

    Make sure that you restart the computer to complete the process.

  • Volume control dissappeared from a bar at the bottom right, bring it up again?

    the icon for the volume control used to be next to the battery and wireless internet icons in the lower right corner... a day he dissappeared and can't get it back... the choice of volume on the taskbar is faded and cannot be marked check...? any ideas how to restore...

    the icon for the volume control used to be next to the battery and wireless internet icons in the lower right corner... a day he dissappeared and can't get it back... the choice of volume on the taskbar is faded and cannot be marked check...? any ideas how to restore...

    This is not the forum for computer issues.
    This forum is for feedback only.

    Always start by specifying what operating system you are using... XP, Vista or Win 7.

    For Vista, use this tutorial:
    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    Go to the three method

    2. for the Volume icon.

    For Win 7, use this tutorial:

    http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html
    Go to the second Option

    9. to activate the Volume icon

    For Windows XP, repost to XP forums:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp?tab=unanswered

  • Can not adjust the volume control

    I have no sound on my computer. When I go into Control Panel, volume control, it I cannot adjust the volume control. I have my computer set up for automatic downloads of microsoft, so I can't tell what I recently downloaded.

    When in Windows volume controls do not work, it usually means the underlying Windows application that control audio is corrupted. You need to retrieve sndvol32.exe is your partition recovery or recovery disc that came with your computer. The process for this varies slightly, but full instructions about recovering Windows volume are available on this tutorial.

  • How can I restore my icon on my taskbar volume control? He disappeared.

    I have a Toshiba laptop with windows Vista as the operating system. Recently, my volume control icon disappeared from my taskbar. How can I restore it?

    > but on mine in taskbar properties the volume and battery are sometimes not clicked on.

    Use this tutorial:
    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    Take the method 3. It applies to all versions of Vista, and it is the easiest method.
    Make sure that you restart the computer afterwards to complete the tutorial procedures.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Lack of volume control and Greyed out in the taskbar properties

    Until recently (past two months) it was never a problem.  When I bought this computer there nearly two years, I created my taskbar which included my volume control.  He has been there since then.  I have Vista, Service Pack 2.

    I have not changed hardware.  But in the last two months my volume control dissappers of the taskbar every once in a while and when I go into the taskbar properties, the control volume is grayed.  It's VERY frustrating because I can't find another way to implement volume control.  Fortunately I have a volume control key on my keyboard and use it when necessary.

    I did a search about this problem and see that a lot of people have the same problem.  WHY?  If this happens due to Windows updates, why didn't this problem been taken care of.  Some of the complaints I've seen in my research were two years old.

    Frustrated.  Please do stop.

    Use this tutorial:

    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    You can try a method first, but most likely the box you need to click is unclickable.

    Go directly to the three method

    2. for the Volume icon

    (B) to activate the Volume - icon Enable_Volume.reg< click="" to="">

    and follow the instructions of #5 à #9 down.

    Make sure that you restart the computer to complete the process.

Maybe you are looking for

  • How to stop the kip awards it is a waste of time

    All of a sudden, I get a kip price whenever I win alone there are a waste of time must get rid of them so, how do I know them?

  • Best OS for 2010 upgrade 2.4 core duo?

    So I got my my mini 2010 since then and it has been relegated to a platform of film glorified since 2012 when I got a high-end MacBook. I have now the need for a desktop computer handle some heavy windows based like HCSS and AutoCAD programs, but rat

  • Reset password for HP Compaq Mini 110-1135TU

    I've also seen a HP Compaq Mini 110-1135TU with a BIOS password that prevent the operating system from loading.   I tried to unplug the CMOS battery and battery power, the password remains. System hault code is: CNU9424W10 If anyone can generate a ma

  • The user profile Service and the user profile cannot be loaded

    My Windows Vista has just received an automatic update online.  Now I can login to my administrator account more.  I get two error messages) 1 the user profile Service does not logon and the user profile 2) cannot be loaded. I can sign in as a guest,

  • audiodg.exe using WAYYY too much CPU...

    A few days ago, I was using my computer as usual, and I noticed that my laptop was running slower than it normally does. I tried to watch several YouTube videos and the video played very choppy and generally slow. I am writing this, this problem is s