Volume control is not showing up for following

Similar Questions

• My speakers stopped working suddenly. the message I get is good card can be used, but the volume control does not appear and when I go into sounds and devices, everything is gray.

  My speakers suddenly stopped working. I went to audio and I received a message sound card may be in use. The volume control does not appear atr from the bottom of the screen and when I go into properties, everything is gray.

  Hi BarbaraEvanchik,

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  For reference: no sound in Windows

• Microsoft LifeChat LX-3000 inline volume controls does not not on Windows 7

  I just bought a Microsoft LifeChat LX-3000 headset, install the LifeChat 1.4 software. The headphones and the microphone are functioning normally, also the command buttons to perform a call and mute, but the buttons for the volume control do not work. I checked the HID services and they are running, also reinstalled the software and drivers but these buttons do not work.

  I use Windows 7 Enterprise (64-bit) on a Dell Studio 15 laptop.
  Thanks in advance for your help.

  Hello

   
  1. it worked before?
  2 have you made any changes to the computer before the show?
  Method 1:
   
  I suggest you to connect to another computer and check with the question.
  If the problem persists after you connect to another computer. I suggest you contact the hardware support for assistance:
  Microsoft Hardware
  http://www.Microsoft.com/hardware/en-us/p/LifeChat-LX-1000#support
   
  Method 2: run the hardware troubleshooter and see if it helps.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  
  Also check out the links:
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
  Troubleshooting: headsets
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/headset/hardware-issues
   
  I hope this helps.

• The volume control will not remain on the taskbar, XP

  The volume control will not remain on the taskbar, I open the control panel and sound to restore everytime I restart the computer. How to restore the registry file which told him to stay?

  Thank you, Larry.

  I found the Microsoft FixIt program and ran that she and that solved the same problem you described.

  Thank you very much!!!

  Ross

• HP wireless keyboard from 2.4 GHz on the HP Pavilion Elite 083 Volume controls does not not in Windows 8

  I have a HP 2.4 GHz wireless keyboard on a desktop HP Pavilion Elite 083 UK:

  Model KG-08510 rev 1.1

  Product #ABU KZ256AA number

  Part number 505143-031

  .. Since the upgrade to Windows 8 Pro to Windows 7 Home Premium, I have problems with getting control of Volume +, - and disable keys on the keyboard to work reliably in Windows 8 Pro.

  In summary, the symptom is that when I start the PC from a start-up to cold which is a full power down of the State of the volume on the keyboard controls do not work.

  However, if I unplug and re - plug the USB wireless receiver that came the keyboard on the PC then on the keyboard volume controls begin to work again.

  I tried the following things to try to solve this problem:

  -Made a lot of new installation of Windows 8 i.e. reformatting the hard drive (no recovery) and fresh install Windows 8 on a blank hard drive.

  -Installation of Microsoft Windows all the updates available for the machine.

  -Manually install drivers wireless keyboard on the site of HP driver for my computer HP Pavilion Elite 083uk (this allows the screen display on to CapsLock and numlock which works reliably every time that I start).

  -Disable 'fast start up' in Windows 8 power settings

  -Using different USB ports on the back of the machine

  This question is re-producable each time and the keyboard volume buttons work fine even from boot cold when I was running Windows 7.

  I think that I have now found a solution / workaround to solve this case no matter who is interested.

  1. download and install the Microsoft "DevCon" tool that provides an interface to command line for Device Manager.

  Download and installation instructions are here:

  http://social.technet.Microsoft.com/wiki/contents/articles/182.how-to-obtain-the-current-version-of-device-console-utility-DevCon-exe.aspx

  2. create a Windows scheduled task with "highest privileges" that works on logon that issues the following command:

  DevCon restart 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  This restarts "HID-compliant consumer control device" that is listed in my device manager which is middle for the proper functioning of the volume control and mute buttons on the keyboard (keyboard functionality is via a separate driver which is not affected).

  NB. you need to replace ""HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02"with whatever hardware ID is listed in the device for that Manager.»

  3. If the above does not work, then you must create a scheduled task to run a batch file with the following:

  DevCon disable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  DevCon enable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

• Volume control does not appear on the screen when I try to activate it. This has never been a problem until now. How can I get this working again?

  The volume control is located at the bottom right of my sidebar it me has not given any problems so far. Now, he just will not appear on the screen when I try to call. This has never been a problem before. I really did something to screw things up (again!) today. This is the first time I had this problem.

  Next time please indicate what opersting system you first use before describe you your problem.

  You can start by doing a system restore. Choose a date on which your Volume icon in the taskbar.
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If for some reason it does not restore the Volume icon, then...

  For Vista, use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can try a method first. If the Volume box is grayed out (is usually), go to method 3.

  2. for the Volume icon

  To activate the Volume - icon Enable_Volume.reg< click="" to="">
  Then, follow the instructions from #5 to #9.
  Make sure that you restart the computer to complete the process.

  For Windows 7, use this tutorial:
  http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

  Go directly to the Option two

  9. to activate the Volume icon

  (A) click on the download button below to download the file below.

  Enable_Volume_Notification_Icon.reg

  then follow the instructions from #11 to #15.

  Make sure that you restart the computer to complete the process.

• Pavilion dv6-2190us: on screen Volume Control Bar not appearing

  Recently had to replace my hard drive. Now I am unable to get the volume control bar will appear on the screen.  The shop which has replaced the hard drive offered for download to the quick launch buttons that I did and it does not work.  What do need me to do/install to get the volume show on the new screen?

  Hello:

  You should be able to restore this feature by installing this software...

  This package provides utility to display onscreen HP for the notebook models and operating systems. The display on the HP screen utility allows the graphical displays pop - up that appear on the screen when certain features, such as volume or brightness, are changed.

  File name: sp55152.exe

• Issue of volume control after downgrading A210-1AS for Win XP

  Hey all,.

  I recently upgraded my satellite A210-1AS to xp and after sorting more things, including the audio drivers, wireless, etc, I have some problems (surprise, surprise)

  1. the sound adjustment on the front wheel can't control the volume, although it worked fine in Vista.
  DD realtek audio Manager is installed fine, AFAIK. Any ideas how to solve this problem?

  2. the buttons on top to control the media work more (toshiba easykeys?).
  Are there drivers for these that everyone found for XP?

  3. (and I'm not too fussed on) there are 3 yellow exclamation marks in Device Manager.
  1. I believe is the modem, which I am not at all worried, the other 2 I do not know. Any ideas?

  Thank you very much for the replies, would be nice to sort. Although I could use volume control in xp, it is not ideal, as I'm sure you can imagine.

  Will check in the morning, thanks again

  Hi Joshua

  I m the owner of the Satellite A210. This laptop is similar to the Equium A210.
  I installed a Windows Vista and XP on the second partition and I have the sound and the sound volume control works very well with both operating systems.

  But I had a little problem with the installation of driver sound. After a short investigation here in the forum, I discovered that I need to first install MS patches; KB888111 and KB835221.
  After installing the patch, I installed the Realtek audio driver. It worked like a charm.

  (2) control buttons doesn't work on my laptop because I have an A210 with the AMD processor and chipset and XP from Toshiba Utilities for my series are not available.

  (3) I have 2 yellow exclamation marks in my device manager. The modem works because I installed the modem driver from an another series of notebook A210. The driver also works.
  Two other unknown devices ("possibly PCI memory controller" or "Mass Storage Controller) may be linked to the material that is only supported by Windows Vista and not XP. Therefore, the XP drivers don t exist also.

  Good bye

• FN keys and volume control does not not on Satellite A210-131

  Hello
  I have a Satellite A210-131 for 3 days now, and the FN keys do not work. The numeric keypad using FN works fine, just the F1-12 combined with FN do nothing. I have the latest drivers and utilities from the website...

  In addition, my touch volume control works quite stupid, it takes less than 20 seconds to set and then its way too hard... I always have to go to the sound control menu to change...
  Help, please!

  Hello

  It's very strange. Usually, if you press the FN key and keep down flash cards must be indicated at the top of the screen. Please try to restart flash cards: start > all programs > TOSHIBA > utilities > restart Flash Cards.

  I don't know what the problem with the touchpad and the control volume but friends Satellite X 200 (the same tablet like on your A200) works well. Problem described is quite strange, and to be honest, I don't know.

• LifeChat lx-3000 Volume controls do not work

  Someone please Help! I have this headset for a while now, and everywhere I look online shows the volume controls will change the volume of the headphones but they ewver seems to do is to change the volume of the SYSTEM DEFAULT of the UNIT!

  If I'm in a gam that I have to close the game to access mixer helmet from the bar windows task and edit this volume. the only way I can get the headset buttons to change the volume of the headphones is if the headset is set as the system default audio output device. »
  Surely this is wrong and I should be able to redefine those buttons to change the volume on the mixer LX-3000 NO default mixer?
  Thanks in advance
  Pykey

  Check these

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/11772089-61DF-409D-bd69-f4588cff42ee/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Microsoft-LifeChat-LX-3000-compatibility-problem/fa2973f2-809F-4ca6-900D-f5c102701437

• Windows Media Player volume control does not work during DVD playback.

  When I play a DVD in Windows Media Player or Windows Media Center I can't adjust the volume with the volume control of the program or main Windows volume control.  Simply sound 100% flight.  It's on a HTPC connected to an A / V recevier, so the only way to adjust the sound with the volume of the receiver control.  When I play any other type of multimedia (avi, mp3, etc.) in the two WMP or WMC in the program volume control is working properly.  The interesting part is, when I play a DVD using VLC Player or Cyberlink Power DVD the volume setting in the program as well as the main Windows volume control works correctly.  This leads me to believe it's a software is not a hardware problem.  I think that WMP and WMC using the same "engine" so the same problem knocking them both.

  Other info:

  Windows 7 64-bit.

  Windows Media Player 12 version

  Audio is routed to the receiver via the digital coaxial

  For what it's worth, this same problem occurred with the same exact material when I'm running Vista 32 bit.

  All other software is the latest version with all updates installed.

  Any ideas are welcomed and appreciated.  Thank you in advance.

  -Michael P.

  Hello

  Reinstall the WMP and WMC application and see if it works very well.

  1. open the Control Panel -> programs and features.

  2. click on Windows to enable or disable features in the left pane.

  3 expand the multimedia features, disable Windows Media Player. Click Yes to continue, and then click OK to exit. Then restart.

  Note: If you turn off your WMP, Windows Media Center will be off either. You may need to reconfigure the settings for Windows Media Center after her reactivation.

  4. open or turn off Windows features turn on again. Functionality in Windows Media Player and Windows Media Center. Turn it back on.

  5. launch Windows Media Player, initialize the program.

  PS: If you turn off your WMP, Windows Media Center will be off either. This does not happen when we choose to turn off MCE.

  $C

  God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• El Capitan keyboard volume control does not

  I upgraded to El Capitan, and now, while volume on the keyboard controls display the volume on the screen change, they have absolutely no effect on the actual volume. I have to manually control the volume within the application (for example, QT).

  I am running OS X El Capitan 10.11.3 on a MacBook Pro for mid-2010, and the volume control on the activity of keyboard perfectly, be it with iTunes or QuickTime Player.

• The volume control does not work on my Tecra A9

  Hi all

  I just be reformatted my laptop and put all the drivers and have a slight problem my on the front volume control not working anymore.
  How to operate?
  Also when I go to Toshiba Assist on doctor connectivity the bluetoooth does not come to the top. How can I get this back up?

  Thanks Pob

  Hello

  Have you installed the operating system using the Toshiba Recovery disk?
  If not; do you have what OS installed?

  It is Win XP?
  If yes you must first reinstall the common Modules then the commands and utilities

• Satellite A305-S6825: Volume control does not stop right or left

  We recently bought the Toshiba: Satellite A305-S6825 and note that the Volume on the front panel control seems to turn left and right, but does not seem to stop.

  I thought that a few twists to the right/left, he'd stop, but no.

  Everyone is the same thin experience?

  > Control volume on the façade seems to turn left and right, but does not seem to stop.

  Don t worry buddy ;) is not a fault or a bad hardware work it s a feature!

  I have the A210 and properties of volume control. I can turn right and left without stops

  Greetings

• IR volume control does not work

  I have a Pioneer AV receiver that going on my 4th Gen Apple TV by HDMI. I'm trying to get the volume control the remote Siri to work. I went into the settings and put him to learn a new device. I push the button on my remote Pioneer when he tells me, + and button also. So it seems that everything is all set up, but always the Siri remote will not control the volume. Could there be something wrong with the remote control of Siri?

  The Apple TV 4 doesn't seem to work with any Pioneer receivers/amps.

  I submitted a bug to Apple months report there. I suggest you do the same.